发动机圆形管道内噪声衰减谱模态分析

本文应用模态分析方法建立了剪切流存在条件下,发动机多段声衬圆形管道声传播工程计算模型,对管内各模态频谱和总噪声衰减频谱进行了算例计算,并与有关文献试验数据进行了对比。结果表明,多段声衬圆形管道中声传播工程计算方法是可行的,从而为发动机前短舱管内声传播研究提供了一种模态分析工程预测方法。     

A numerical method for computation of sound radiation from an unflanged duct

Some issues involved in establishing a numerical model for sound radiation from a straight duct are addressed in this paper. The main ingredient of the numerical method is solutions of linearized Euler equations using a high order compact scheme. Farfield directivity is estimated through an integral solution of Ffowcs-Williams Hawkings equations. A generic test case of planar wave radiation from an unflanged duct is studied. The sound pressure level and wave propagation in the nearfield are analyzed, together with the farfield directivity. Comparison with analytical solutions shows good agreement. The effect of grid resolution on the sound radiation pattern and the construction of integration surface on the farfield directivity are discussed.     

A displacement-pressure finite element formulation for analyzing the sound transmission in ducted shear flows with finite poroelastic lining

In the present work, the propagation of sound in a lined duct containing sheared mean flow is studied. Walls of the duct are acoustically treated with absorbent poroelastic foams. The propagation of elasto-acoustic waves in the liner is described by Biot's model. In the fluid domain, the propagation of sound in a sheared mean flow is governed by the Galbrun's equation. The problem is solved using a mixed displacement-pressure finite element formulation in both domains. A 3D implementation of the model has been performed and is illustrated on axisymmetric examples. Convergence and accuracy of the numerical model are shown for the particular case of the modal propagation in a infinite duct containing a uniform flow. Practical examples concerning the sound attenuation through dissipative silencers are discussed. In particular, effects of the refraction effects in the shear layer as well as the mounting conditions of the foam on the transmission loss are shown. The presence of a perforate screen at the air-porous interface is also considered and included in the model.     

Non-linear effect of wall linings on sound attenuation in ducts

The equivalent surface source method is extended to the analysis of high intensity sound propagation in a duct whose wall is partially treated with a sound absorbing material. The propagation of sound in the gas is assumed to be linear, but the acoustic resistance of the sound absorbing material is assumed to be a function of the normal acoustic velocity. The problem is reduced to a non-linear integro-differential equation for the fluid particle displacement at the lined wall surface, which can be solved by a successive approximation method. Numerical examples show that the non-linear effect decreases or increases the peak sound attenuation rate of the lowest mode depending upon the linear component of the resistance. The dependence of the attenuation spectrum on modal phase difference of multi-mode incident waves is heavily affected by the non-linear effect. In the case of incident waves of multi-circumferential modes, different circumferential modes are generated by the non-linear effect.     

Comparison of measured broadband noise attenuation spectra from circular flow ducts and from lined engine intakes with predictions

Sound propagation in lined circular ducts is investigated in the presence of uniform and sheared flow. The modal solutions are obtained by solving an eigenvalue equation which, in the case of sheared flow, is derived by using finite differences and by matching the pressure and the radial component of the particle velocity at the interface of the regions of uniform and sheared flow. For the uniform flow region, standard Bessel function solutions are used. The attenuation of acoustic energy at a given frequency and for a given liner length is computed on the assumption that at the inlet to the lined duct, the acoustic energy is equally distributed among the propagating modes. The total number of propagating modes is determined from the hard wall “cut off” condition. The failure to find some of the modal solutions on the attenuation computed in this way is discussed. It is shown that the reliability of this method of computing liner attenuation depends on the ability to successfully compute most of the modal solutions over a large range of frequencies, flow conditions and duct wall impedance values. A numerical technique is developed which uses a fraction of the total number of solutions to compute the total attenuations without appreciable loss of accuracy. Measured attenuation spectra from a flow duct facility and from lined intake ducts of the RB.211 engine are compared with predictions. In general very good agreement between predictions and measurements is obtained.     

Effect of wall shear layers on the sound attenuation in acoustically lined rectangular ducts

This paper deals with the manner in which a shear layer proximate to the wall of an acoustically treated rectangular duct modifies the attenuation spectra. The restriction of this shear layer to the region near the lined duct walls is aimed at simulating boundary layer effects on the attenuation. Theoretical results show that shear significantly changes the peak attenuation, causing a frequency shift of this peak. For the inlet mode, i.e. flow against the direction of sound propagation, both results are a strong function of Mach number and layer thickness. For the exhaust mode, i.e. flow in the direction of propagation, these effects are relatively weak.     

The attenuation of the higher-order cross-section modes in a duct with a thin porous layer

A numerical method for sound propagation of higher-order cross-sectional modes in a duct of arbitrary cross-section and boundary conditions with nonzero, complex acoustic admittance has been considered. This method assumes that the cross-section of the duct is uniform and that the duct is of a considerable length so that the longitudinal modes can be neglected. The problem is reduced to a two-dimensional (2D) finite element (FE) solution, from which a set of cross-sectional eigen-values and eigen-functions are determined. This result is used to obtain the modal frequencies, velocities and the attenuation coefficients. The 2D FE solution is then extended to three-dimensional via the normal mode decomposition technique. The numerical solution is validated against experimental data for sound propagation in a pipe with inner walls partially covered by coarse sand or granulated rubber. The values of the eigen-frequencies calculated from the proposed numerical model are validated against those predicted by the standard analytical solution for both a circular and rectangular pipe with rigid walls. It is shown that the considered numerical method is useful for predicting the sound pressure distribution, attenuation, and eigen-frequencies in a duct with acoustically nonrigid boundary conditions. The purpose of this work is to pave the way for the development of an efficient inverse problem solution for the remote characterization of the acoustic boundary conditions in natural and artificial waveguides.     

Properties of sound attenuation around a two-dimensional underwater vehicle with a large cavitation number

Due to the high speed of underwater vehicles,cavitation is generated inevitably along with the sound attenuation when the sound signal traverses through the cavity region around the underwater vehicle.The linear wave propagation is studied to obtain the influence of bubbly liquid on the acoustic wave propagation in the cavity region.The sound attenuation coefficient and the sound speed formula of the bubbly liquid are presented.Based on the sound attenuation coefficients with various vapor volume fractions,the attenuation of sound intensity is calculated under large cavitation number conditions.The result shows that the sound intensity attenuation is fairly small in a certain condition.Consequently,the intensity attenuation can be neglected in engineering.     

On the acoustic modes in a duct containing a parabolic shear flow

The exact solution of the acoustic wave equation in an unidirectional shear flow with a parabolic velocity profile is obtained, representing sound propagation in a plane, parallel walled duct, with two boundary layers over rigid or impedance walls. It is shown that there are four cases, depending on the critical level(s) where the Doppler shifted frequency vanishes: (i) for propagation upstream the critical levels are outside the duct (case II); (ii) for propagation downstream there may be two (case IV), one (case I) or no (case III) critical level inside the duct. The acoustic wave equation is transformed in each of the four cases to particular forms of the extended hypergeometric equation, which has power series solutions, some involving logarithmic singularities. In the cases where critical levels occur, at real or ‘imaginary’ distance, matching of two or three pairs of solutions, valid over regions each overlapping the next, is needed. The particular case of the parabolic velocity profile is used to address general properties of sound in unidirectional shear flows. For example, it is shown that for ducted shear flows, there exist a pair of even and odd eigenfunctions, in the absence of critical levels. It is also proved, in more than one instance, that there is no single set of eigenvalues and eigenfunctions valid across one or two shear layers. This leads to the general conjecture, considering the acoustics of shear flows in ducts, that critical levels separate regions with distinct sets of eigenvalues and eigenfunctions.     

Vortex sound in the presence of a low Mach number flow across a drum-like silencer

The sound generated by a vortex propagating across a two-dimensional duct section with flexible walls (membranes) in an infinitely long rigid duct conveying a flow is investigated numerically using the matched asymptotic expansion technique and the potential theory. The effects of the initial vortex position, the mechanical properties of the flexible walls, and the mean flow on the sound generation are examined in detail. Results show that the presence of a vortex inside a uniform mean flow can strengthen or attenuate the sound generation, depending on the phase of the membrane vibration when the vortex starts vigorous interaction with the membranes and the strength of the mean flow. The results tend to imply that there is a higher chance of sound amplification when a vortex stream is moving closer to the lighter membrane under a relatively strong mean flow or when the mean flow is weak. The chances of sound amplification or attenuation are equal otherwise.     

Sound attenuation in acoustically lined curved ducts in the absence of fluid flow

A study has been made of the sound attenuation in a lined curved duct with rectangular cross-section. In this study, the derivation of the eigenvalue equation was based on the continuity of the normal component of the particle displacement and the matching of the acoustic pressure on the acoustic lining surface. The sound attenuation was calculated by using the acoustic energy expression for the waves propagating in a curved duct. For a given duct geometry and known acoustic lining impedances, a computer program was developed to solve for the eigenvalues and to obtain the sound attenuation of the propagating waves in the lined curved duct. It was found that in the case studied here the fundamental mode was least attenuated. The total sound attenuation was calculated on the assumption that the amplitudes for all propagating waves were equal at a given frequency. Effects of aspect ratio, bend angle and the acoustic impedance on the sound attenuation were investigated in the present work.     

声波在含气泡液体中的线性传播

为了探讨含气泡液体对声波传播的影响, 研究了声波在含气泡液体中的线性传播. 在建立含气泡液体的声学模型时引入气泡含量的影响,建立气泡模型时引用 Keller的气泡振动模型并同时考虑气泡间的声相互作用,得到了经过修正的气泡振动方程. 通过对含气泡液体的声传播方程和气泡振动方程联立并线性化求解,在满足 (ω R₀)/c << 1 的前提下,得到了描述含气泡液体对声波传播的衰减系数和传播速度. 通过数值分析发现,在驱动声场频率一定的情况下,气泡含量的增加及气泡的变小均会导致衰减系数增加和声速减小;气泡的体积分数和大小一定时, 驱动声场频率在远小于气泡谐振频率的情况下,声速会随驱动频率的增加而减小; 气泡间的声相互作用对声波传播速度及含气泡液体衰减系数的影响不明显.最终认为气泡的大小、 数量和驱动声场频率是影响声波在含气泡液体中线性传播的主要因素. 关键词： 含气泡液体 线性声波 声衰减系数 声速     

Sound propagation through vegetation

The propagation of sound through a large number of scatterers (i.e., trees) is treated in a similar way to a classical diffusion problem. A general differential equation governing the sound intensity is derived which is valid under certain conditions, notably that the depth of the belt of vegetation is large, and absorption small. The predictions of this theory are compared with results derived from a small scale model study, and with some field measurements. They are also compared with published field data. The implications of some of the conclusions reached for the practical achievement of effective sound attenuation are pointed out. In general, it would appear that significant noise reductions may be achieved for a predominantly high frequency source if the existing ground cover is acoustically hard, or if there is no “ground effect” attenuation between source and receiver for some other reason. In other cases, the noise reduction will be much lower and may be negative.     

Long-range sound propagation in the central region of the Baltic Sea

The data obtained from a set of experiments on the long-range, low-frequency (<5 kHz) sound propagation in the central region of the Baltic Sea are analyzed. The experiments were carried out in the summer season, with a fully developed underwater sound channel. Experimental data on the sound attenuation are presented. A significant excess of the attenuation coefficients over the predicted absorption coefficients is obtained. The quantitative estimates indicate that the sound scattering by internal waves is the most probable mechanism responsible for the observed excessive sound attenuation. The frequency dependence of the attenuation coefficient exhibits a minimum whose position on the frequency axis at the beginning of the summer season noticeably differs from that at the end of summer. The analysis of the propagation conditions allows one to relate the position of this minimum to the critical frequency of the water modes. In addition to the intensity parameters of the sound field, the formation of the time structure of explosion-generated signals propagating in the Baltic underwater sound channel is considered for the case of the sound propagation along the 360-km path crossing the Gotland Hollow. The specific role of the bottom waves in the time structure formation at short distances from the sound source is demonstrated.     

Sound attenuation of a periodic array of micro-perforated tube mufflers

The wave propagation in a periodic array of micro-perforated tube mufflers is investigated theoretically, numerically and experimentally. Because of the high acoustic resistance and low mass reactance due to the sub-millimeter perforation, the micro-perforated muffler can provide considerable sound attenuation of duct noise. Multiple mufflers are often used to enhance attenuation performance. When mufflers are distributed periodically in a duct, the periodic structure produces special dispersion characteristics in the overall sound transmission loss. The Bloch wave theory and the transfer matrix method are used to study the wave propagation in periodic micro-perforated tube mufflers and the dispersion characteristics of periodic micro-perforated mufflers are examined. The results predicted by the theory are compared with finite element method simulation and experimental results. The results indicate that the periodic structure can influence the performance of micro-perforated mufflers. With different periodic distances, the combination of the periodic structure and the micro-perforated tube muffler can contribute to the control of lower frequency noise with a broader frequency range or improvement of the peak transmission loss around the resonant frequency.     

Order-independent method of characteristics

A method of characteristics is developed for any system of partial differential equations of any finite order that admits an isovector fieldV and an initial data map satisfying a specific transversality condition. It is shown to agree with the classical method of characteristics for a nonlinear, first-order PDE and for quasilinear systems of first-order PDE with the same principal part. The method is also applicable to systems of nonlinear, first-order PDE and to systems of higher order, where it agrees with results obtained by similarity and group invariant methods. Implementation of the characteristic method is easier than classical group invariant methods because a complete, independent system of invariants of the flow generated by the isovector (group symmetry) does not have to be computed. General solutions are obtained only whenV is a Cauchy characteristic vector of the fundamental ideal; otherwise, any characteristic solution is shown to satisfy an explicit system of differential constraints. Explicit examples and comparisons with more classical methods are given.     

沉积物中声速和衰减系数的宽带测量方法

海底沉积物作为海洋波导声传播的下边界普遍存在于大洋中,获知其特性对于准确的声传播和混响建模是十分必要的。为了能够快速而准确地测量沉积物中的声速和衰减系数,提出一种基于脉冲压缩技术的测量方法,对接收信号进行压缩来提取透射波,根据不同厚度样品的透射波来计算沉积物中的声速和衰减系数。该方法不仅可以克服实验过程中经常遇到的多途干扰,而且测量过程简单,可以同时获得测量频带内所有频点的声速和衰减系数,即实现了对声速和衰减系数的宽带测量。在实验室环境条件下,90~170kHz的测量频带内,测得沙样品中的声速为1710~1713m/s,衰减系数在56~70dB/m之间。通过窄带和宽带测量结果的比较可以看出,声速的宽带测量结果与窄带测量结果吻合得较好,而衰减系数在频带后半部分存在较大的起伏。      

Bulk reaction modeling of ducts with and without mean flow

A general formulation for analysis of sound field in a uniform flow duct lined with bulk-reacting sound-absorbing material is presented here. Presented theoretical model predicts the rate of attenuation for symmetric as well as asymmetric modes in rectangular duct lined with loosely bound (bulk-reacting) sound-absorbing material, which allows acoustic propagation through the lining. The nature of attenuation in rectangular ducts lined on two and four sides with and without mean flow is discussed. Computed results are compared with published theoretical and experimental results. The presented model can be used as guidelines for the acoustic design of silencers, air-conditioning ducts, industrial fans, and other similar applications.