Concentration dependent Raman study of 1,4-diethynylbenzene on gold nanoparticle surfaces

Concentration dependent adsorption behaviors of 1,4-diethynylbenzene (DEB) on gold nanoparticle surfaces have been investigated by means of surface-enhanced Raman scattering (SERS). The spectral features including the multiple peaks in the ν(CC)_bound stretching region were found to vary as the bulk concentration of DEB in gold nanoparticles. At a low concentration of 10⁻⁶ M, only the multiple ν(CC)_bound band was conspicuous at ∼2000 cm⁻¹ and the free CC stretching band was barely detected in the SERS spectra. When the bulk concentration was increased, the ν(CC)_free band became prominent at ∼2104 cm⁻¹. These splitting bands may provide the evidence that DEB is adsorbed on gold mainly through one of the two acetylene groups with the other CC groups being pendent with respect to the gold surface. Ab initio density functional theory (DFT) calculations of DEB were performed to check the vibrational assignment.     

Size-dependent carbon monoxide adsorption on neutral gold clusters

We report on experiments probing the reactivity of neutral Au(n) clusters, n = 9-68, with carbon monoxide. The gold clusters are produced in a pulsed laser vaporization cluster source, operated at room temperature (RT) or at liquid-nitrogen temperature (LNT), pass through a low-pressure reaction cell containing CO gas, and are subsequently laser ionized. The reaction probabilities are determined by recording mass abundance spectra with time-of-flight mass spectrometry. The main observations are a strong temperature dependence and a remarkable size dependence. Upon cooling of the cluster source to LNT, the reactivity increases substantially. At LNT, the reaction probabilities for Au(n) with the first CO molecule are about a factor 10 higher than at RT. Moreover, adsorption of two, three, and even four CO molecules is observed, in contrast to RT clusters which at most adsorb one CO molecule. This temperature dependence is related to the lifetime of the cluster-molecule complexes, being much longer for cold clusters. The observed striking size dependence is similar at both temperatures and is discussed in terms of the electronic structure effects.     

Surfactant adsorption onto cellulose surfaces

The adsorption of the cationic surfactant, hexadecyl trimethyl ammonium bromide, C16TAB, onto model cellulose surfaces, prepared by Langmuir-Blodgett deposition as thin films, has been investigated by neutron reflectivity. Comparison between the adsorption of C16TAB onto hydrophilic silica, a hydrophobic cellulose surface, and a regenerated (hydrophilic) cellulose surface is made. Adsorption onto the hydrophilic silica and onto the hydrophilic cellulose surfaces is similar, and is in the form of surface aggregates. In contrast, the adsorption onto the hydrophobic cellulose surface is lower and in the form of a monolayer. The impact of the surfactant adsorption and the in situ surface regeneration on the structure of the cellulose thin films and the nature of solvent penetration into the cellulose films are also investigated. For the hydrophobic cellulose surface, intermixing between the cellulose and surfactant occurs, whereas there is little penetration of surfactant into the hydrophilic cellulose surface. Measurements show that solvent exchange between the partially hydrated cellulose film and the solution is slow on the time scale of the measurements.     

Nanografting de novo proteins onto gold surfaces

The immobilization of novel proteins onto addressable locations on a flat surface has potential applications in a range of biotechnologies. Here we describe the nanopatterning of a de novo protein onto a gold surface. Patterning was achieved using a technique called nanografting, in which the tip of an atomic force microscope is used to disrupt a preexisting monolayer of alkanethiol molecules on a gold surface, thereby facilitating exchange with alternative thiol-linked molecules from the surrounding solution. The protein used for these studies was chosen from a designed combinatorial library of de novo sequences expressed in E. coli and was engineered to have a glycine-glycine-cysteine tag at its C-terminus, thereby enabling attachment to the gold surface through a single cysteine thiol. The average height of the grafted protein patterns was found to be somewhat higher than expected from the known NMR structure of the protein. Compression of the nanografted patches by an external force (below 10 nN) was reversible but showed some hysteresis. Interestingly, both the energy required to deform the immobilized protein patterns and the energy defined by the hysteresis loop were found to be of the same order as the energy required to unfold the monomeric protein in solution. These studies demonstrate the possibility of preparing nanometer scale protein arrays, lowering significantly the volume requirements of the protein samples necessary to fabricate protein-based biosensor arrays and thereby providing a base for increasing their sensitivity.     

DNA dissociation and degradation at gold nanoparticle surfaces

The instability of DNA-functionalized gold nanoparticles (Au-DNA conjugates) upon exposure to high temperatures is characterized using fluorescence spectroscopy, gel electrophoresis and ion-exchange chromatography. Above 70 °C, aqueous Au-DNA conjugates decompose within hours due to both desorption of thiol-terminated DNA from the gold nanoparticle surface and chemical degradation of DNA in the presence of colloidal gold. Although the chemical mechanism for DNA degradation was not identified in this study, the gold surface participates directly in the cleavage reaction. These results have important implications for the use of Au-DNA conjugates in biotechnological and clinical applications that require high temperatures, such as polymerase chain reaction (PCR).     

Adsorption change of cyclohexyl acetylene on gold nanoparticle surfaces

The conformational changes of cyclohexyl acetylene (CHAL) on gold nanoparticle surfaces were investigated by means of concentration- and temperature-dependent surface-enhanced Raman scattering (SERS). Depending on concentrations and temperatures, the spectral changes of the acetylene ν(C≡C) stretching vibration on gold nanoparticles appeared to be more conspicuous than those of cyclohexyl ring modes. The density functional theory (DFT) calculation was performed at the level of B3LYP/6-31G++(d,p) to compare the energetic stability and vibrational frequencies of the various conformers of cyclohexanethiol (CHT) and CHAL. The DFT calculations were also carried out at the level of B3LYP/LACVP** on the CHAL molecule adsorbed on Au clusters at several sites to explain the spectral changes of the acetylene ν(C≡C) stretching vibration.     

Evidence for patchy lipid layers on gold nanoparticle surfaces

Gold nanoparticles bearing multiple surface ligands are becoming favored candidates as multifunctional targeting, imaging, and therapeutic vehicles for biomedicine. The question of spatial location of different ligands on nanoparticle surfaces, especially with those of diameters less than 100 nm, is an important one that is difficult to quantitatively address. Here we functionalize the surface of 20, 50, and 90 nm gold nanoparticles with two different lipids, both single and mixed, using two different surface chemical procedures. Mass spectrometry supports the presence of both lipids in the mixed-lipid systems on nanoparticles, while electron microscopy evidence shows domain sizes for one lipid apparently a quarter to a half the projected diameter for 50 and 90 nm particles; but for 20 nm particles, there is no evidence for the existence of patches of the two lipids. Larger gold nanoparticles (90 nm) can be decorated with an array of 12 nm gold nanoparticles by use of a third lipid and antibody-antigen connectors; the display of the 12 nm particles about the 90 nm particles can be controlled to some extent by the initial surface chemistry and is quantified via a new angle analysis procedure.     

Theoretical study of NO adsorption on gold surfaces

The activities of neutral,anionic,and cationic Au(111),Au(100),and Au(310) surfaces,as well as an Au adatom on Au(111) surface towards NO adsorption have been studied by performing density functional theory calculations.It was found that the activity of gold increases as the coordination number of the gold atoms decreases,and that the cationic surfaces are generally more active than the neutral and anionic surfaces.The activity of Au surfaces towards NO adsorption is attributable to the presence of low coor...     

Surface science of DNA adsorption onto citrate-capped gold nanoparticles

Single-stranded DNA can be adsorbed by citrate capped gold nanoparticles (AuNPs), resulting in increased AuNP stability, which forms the basis of a number of biochemical and analytical applications, but the fundamental interaction of this adsorption reaction remains unclear. In this study, we measured DNA adsorption kinetics, capacity, and isotherms, demonstrating that the adsorption process is governed by electrostatic forces. The charge repulsion among DNA strands and between DNA and AuNPs can be reduced by adding salt, reducing pH or by using noncharged peptide nucleic acid (PNA). Langmuir adsorption isotherms are obtained, indicating the presence of both adsorption and desorption of DNA from AuNPs. While increasing salt concentration facilitates DNA adsorption, the desorption rate is also enhanced in higher salt due to DNA compaction. DNA adsorption capacity is determined by DNA oligomer length, DNA concentration, and salt. Previous studies indicated faster adsorption of short DNA oligomers by AuNPs, we find that once adsorbed, longer DNAs are much more effective in protecting AuNPs from aggregation. DNA adsorption is also facilitated by using low pH buffers and high alcohol concentrations. A model based on electrostatic repulsion on AuNPs is proposed to rationalize the DNA adsorption/desorption behavior.     

Molecular modeling of oligopeptide adsorption onto functionalized quartz surfaces

The adsorption of an EAK 16-II oligopeptide sequence in aqueous medium onto functionalized quartz surfaces has been studied by using force field calculations and molecular dynamics methods. Two different surfaces have been simulated respectively involving fully methylated and fully silanolic quartz surfaces. Geometry optimization and molecular dynamics simulations showed that the adsorption process is mainly governed by the electrostatic interactions between SiO- surface groups and the charged residues of the oligopeptide sequence. In particular, it was found that strong electrostatic interactions (a) prompt the parallel orientation of the oligopeptide with respect to the hydrophilic charged surface, resulting in an effective physisorption process and (b) stabilize the beta-sheet configuration of the physisorbed molecules. In particular, the end-on oligopeptide orientations are demonstrated to progressively lie back onto the hydrophilic surface, but this does not happen onto the hydrophobic surface. In any case, no physisorption process was observed for the fully methylated surface, where the molecule is seen to move away from the surface during the simulation time.     

Crystal-face-selective adsorption of Au nanoparticles onto polycrystalline diamond surfaces

Crystal-face-selective adsorption of Au nanoparticles (AuNPs) was achieved on polycrystalline boron-doped diamond (BDD) surface via the self-assembly method combined with a UV/ozone treatment. To the best of our knowledge, this is the first report of crystal-face-selective adsorption on an inorganic solid surface. Hydrogen-plasma-treated BDD samples and those followed by UV/ozone treatment for 2 min or longer showed almost no adsorption of AuNP after immersion in the AuNP solution prepared by the citrate reduction method. However, the samples treated by UV/ozone for 10 s showed AuNP adsorption on their (111) facets selectively after the immersion. Moreover, the sample treated with UV/ozone for 40-60 s showed AuNP adsorption on the whole surface. These results indicate that the AuNP adsorption behavior can be controlled by UV/ozone treatment time. This phenomenon was highly reproducible and was applied to a two-step adsorption method, where AuNPs from different batches were adsorbed on the (111) and (100) surface in this order. Our findings may be of great value for the fabrication of advanced nanoparticle-based functional materials via bottom-up approaches with simple macroscale procedures.     

Size-dependent electrocatalytic activity of gold nanoparticles on HOPG and highly boron-doped diamond surfaces

Gold nanoparticles were prepared by electrochemical deposition on highly oriented pyrolytic graphite (HOPG) and boron-doped, epitaxial 100-oriented diamond layers. Using a potentiostatic double pulse technique, the average particle size was varied in the range from 5 nm to 30 nm in the case of HOPG as a support and between < 1 nm and 15 nm on diamond surfaces, while keeping the particle density constant. The distribution of particle sizes was very narrow, with standard deviations of around 20% on HOPG and around 30% on diamond. The electrocatalytic activity towards hydrogen evolution and oxygen reduction of these carbon supported gold nanoparticles in dependence of the particle sizes was investigated using cyclic voltammetry. For oxygen reduction the current density normalized to the gold surface (specific current density) increased for decreasing particle size. In contrast, the specific current density of hydrogen evolution showed no dependence on particle size. For both reactions, no effect of the different carbon supports on electrocatalytic activity was observed.     

Probing protein adsorption onto mercaptoundecanoic acid stabilized gold nanoparticles and surfaces by quartz crystal microbalance and zeta-potential measurements

The adsorption characteristics of three proteins [bovine serum albumin (BSA), myoglobin (Mb), and cytochrome c (CytC)] onto self-assembled monolayers of mercaptoundecanoic acid (MUA) on both gold nanoparticles (AuNP) and gold surfaces (Au) are described. The combination of quartz crystal microbalance measurements with dissipation (QCM-D) and pH titrations of the zeta-potential provide information on layer structure, surface coverage, and potential. All three proteins formed adsorption layers consisting of an irreversibly adsorbed fraction and a reversibly adsorbed fraction. BSA showed the highest affinity for the MUA/Au, forming an irreversibly adsorbed rigid monolayer with a side-down orientation and packing close to that expected in the jamming limit. In addition, BSA showed a large change in the adsorbed mass due to reversibly bound protein. The data indicate that the irreversibly adsorbed fraction of CytC is a monolayer structure, whereas the irreversibly adsorbed Mb is present in form of a bilayer. The observation of stable BSA complexes on MUA/AuNPs at the isoelectric point by zeta-potential measurements demonstrates that BSA can sterically stabilize MUA/AuNP. On the other hand, MUA/AuNP coated with either Mb or CytC formed a reversible flocculated state at the isoelectric point. The colloidal stability differences may be correlated with weaker binding in the reversibly bound overlayer in the case of Mb and CytC as compared to BSA.     

Template-directed adsorption of block copolymers on alkanethiol-patterned gold surfaces

Functionalized alkanethiols have been self-assembled on gold to modify the wetting properties of the surface and promote or hinder the adsorption of block copolymers containing both hydrophobic and hydrophilic blocks. X-ray photoelectron spectroscopy (XPS) studies of spin-coated polyethylene-block-poly(ethylene oxide) (PE-b-PEO) copolymers on 16-mercaptohexadecanoic acid (MHDA)-, octadecanethiol (ODT)-, and 1H,1H,2H,2H-perfluorodecanethiol (PFDT)-covered surfaces have been performed. In the case of an 80 wt % PEO block copolymer, spin-coating on a gold surface precovered with MHDA results in a polymer film thick enough to completely attenuate Au 4f photoelectrons; spin-coating on the more hydrophobic ODT and PFDT monolayers leads to significantly thinner polymer films and incomplete attenuation of the gold photoelectrons. The opposite results are observed when a 20 wt % PEO block copolymer is used. Angle-resolved XPS studies of the 80 wt % PEO block copolymer spin-coated onto an MHDA-covered surface indicate that the PE blocks of the polymer segregate to the near-surface region, oriented away from the hydrophilic carboxylic acid tails of the monolayers; the surface concentration of PE is further enhanced by annealing at 90 degrees C. Microcontact printing and dip-pen nanolithography have been used to pattern gold surfaces with MHDA, and the surfaces have been backfilled with ODT or PFDT, such that the unpatterned regions of the surface are covered with hydrophobic monolayers. In the case of backfilling with PFDT, spin-coating the 80 wt % PEO copolymer onto these patterned surfaces and subsequent annealing results in the block copolymer preferentially adsorbing on the MHDA-covered regions and forming well-defined patterns that mimic the MHDA pattern, as determined by scanning electron microscopy and atomic force microscopy. Significantly worse patterning, characterized by micron-sized polymer droplets, results when the surface is backfilled with ODT instead of PFDT. Using PFDT and MHDA, polymer features having widths as small as 500 nm have been formed. These studies demonstrate a novel method to pattern block copolymers with nanoscale resolution.     

Brownian dynamics simulations of polyelectrolyte adsorption onto charged patterned surfaces

The adsorption of single polyelectrolyte molecules onto surfaces decorated with periodic arrays of charged patches was studied using Brownian dynamics simulations. A free-draining, freely jointed bead-rod chain was used to model the polyelectrolyte, and electrostatic interactions were incorporated using a screened Coulombic potential with the excluded volume accounted for by a hard-sphere potential. The simulations predicted that the polyelectrolyte lies close to the adsorbing surface if the patch length, surface charge density, and screening length are sufficiently large. Chain conformations were found to be very sensitive to patch length, patch spacing, and the nature of the charge on adjacent patches. This is due both to the size of the polymer relative to patch length and spacing and to the structure of the electric field near the surface. In some cases, the component of the radius of gyration parallel to the surface can be made smaller than its free-solution value, which is contrary to what is observed for a uniformly charged surface. Isolated charged patches were also considered, and significant adsorption was observed above a critical surface charge density. The results demonstrate how polyelectrolyte conformations can be controlled by the design of the charged patches and may be useful for applications in which adsorbed polyelectrolyte films play a key role.     

Characterization of fibrinogen adsorption onto glass microcapillary surfaces by ELISA

Adsorption of biomolecules onto microchannel surfaces remains a critical issue in microfluidic devices. This paper investigates the adsorption of fibrinogen on glass microcapillaries using an immunoassay method (ELISA) and X-ray photoelectron spectroscopy (XPS). Various adsorption conditions such as protein concentrations and incubation times, buffer pH, buffer ionic strengths and effects of flow are presented. ELISA is successfully demonstrated as a facile and robust technique to examine these phenomena. The highest adsorption level occurs near the isoelectric point of fibrinogen (pH 5.0) and low buffer ionic strengths (0-8 mM). Microchannel surface saturation was achieved at a fibrinogen solution concentration of approximately 50 microg ml(-1). Fibrinogen adsorption under flow was always higher than that seen in static systems. The importance of diffusion phenomena in microchannels on protein adsorption was demonstrated. ELISA experiments using fused silica and PEEK have also confirmed significant adsorption on these mass spectrometer transfer line materials.     

Brownian dynamics simulations of polyelectrolyte adsorption onto topographically patterned surfaces

The effect of patterned surface topography on the adsorption of single polyelectrolyte molecules is explored using Brownian dynamics simulations. The polyelectrolyte is modeled as a free-draining, freely jointed bead-rod chain, and electrostatic interactions are incorporated using a screened Coulombic potential with excluded volume interactions accounted for by the repulsive part of a Lennard-Jones potential. Topography consisting of periodically spaced valleys of square cross section separated by flat hills is considered. Chain conformations are characterized for a wide range of valley widths, depths, and spacings as well as for several different types of surface charge distributions. Depending on the parameter values describing the topography, the chains are found to adopt conformations ranging from flat and extended to those associated with bridge-, brush-, or semi-bridge-like structures. The formation of these structures is rationalized on the basis of a free-energy model that takes into account the increase in free energy due to entropic confinement, excluded volume interactions, and chain stretching as well as the decrease in free energy due to bead-surface electrostatic attraction. The results of this work are expected to be useful in designing patterned surface topography to control the conformations of adsorbed polyelectrolyte molecules.     

A spectroscopic study of mercury vapor adsorption on gold nanoparticle films

We have modified the surfaces of glass and Si(100) with 3-aminopropyltrimethoxy silane, a fourth generation amine-terminated poly(amidoamine) dendrimer, and poly(diallydimethyl ammonium chloride) to facilitate adsorption onto colloidal gold particles (average diameter 3, 5, 12, and 22 nm). UV-vis absorption spectroscopy and atomic force microscopy monitored the adsorption process, which is governed by particle diffusion to the surface. The differences in adsorption to the three adhesion layers as a function of pH are discussed. Mercury vapor was exposed to the gold particle films and quantified by X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy. The surface plasmon oscillation of 5-, 12-, and 22-nm particles blue-shifts after exposure to parts-per-million levels of mercury vapor in air. Particle films prepared from the 3-nm gold particles develop a broad peak centered near 530 nm after exposure to mercury vapor. The results demonstrate a novel "litmus" film for mercury vapor.