Synthesis and different molecular recognition of two dye-modified cyclodextrins with spacer of different length

Two β-cyclodextrin derivatives (1 and 2) bearing a hydroxyazobenzene unit, each having a butylene or a 4,7-dioxadecylene spacer between the cyclodextrin and the dye, were prepared, which showed guest-induced color changes with a marked difference in molecular recognition behavior in aqueous solution.     

Interactions of native and modified cyclodextrins with some B-vitamins

Interactions of native and modified α- and β-cyclodextrins with nicotinic acid, pyridoxine and pyridoxal were studied by isothermal titration calorimetry, solution calorimetry, and ¹H NMR spectroscopy at 298.15 K and pH 6.8. Weak 1:1 complex formation was found only between α-cyclodextrin and nicotinic acid. The stability constant and corresponding thermodynamic parameters of complex formation (Δ_c G, Δ_c H and Δ_c S) were calculated using the calorimetric data. The ¹H NMR data indicate the shallow insertion of the carboxylic group of the nicotinic acid molecule into α-CD cavity. For all other compounds the weak interactions, not accompanied by complex formation, were characterized by the enthalpic virial coefficients calculated on the basis of McMillan-Mayer approach. The obtained thermodynamic parameters were analyzed in the terms of influence of the solutes’ structure on the selectivity of intermolecular host-guest interactions.     

Metal ion complexes with native cyclodextrins. An overview

The review presents a survey of the metal complexing properties of native cyclodextrins (including deprotonation in alkaline medium) and a report on some recent results on composition and stability of metal–cyclodextrin complexes.     

Chiral separability of hydrophobic boron cluster anions with native cyclodextrins in water-methanol background electrolytes

Cluster anions of boron are built up on three-center two-electron bonds in contrast to naturally occurring compounds and their synthetic analogs. Methanol works as a solvent and as a competing agent, which advantageously adjusts reasonable strength of their interaction with native CDs in water-organic BGE. The highest methanol concentration preserving chiral discrimination of atropoisomers of individual anions is approximately 35, 55 and 75% v/v for alpha-, beta- and gamma-CD, respectively. alpha-CD separates anionic 7, 8-nido-dicarbaundecaborate clusters with small exo-skeletal substituents. beta-CD separates anions of all four tested structural types. The efficiency of separation of a compound with alpha- or beta-CD is always markedly lower than the separation efficiency at the absence of a CD in BGE. The efficiency of separation of a compound with beta-CD is always lower than the efficiency of separation of the compound with alpha-CD. gamma-CD was proved to be unsuitable as a chiral selector because in BGEs with gamma-CD, effective mobilities of analytes as well as their differences continuously decrease. The decrease was ascribed to the decomposition of the gamma-CD. The assessment of analytical prospect of alpha- and beta-CDs as chiral selectors for chiral separations of boron cluster anions requires knowledge of stability of individual CDs at the conditions of analyses and recognition of the chance to eliminate low separation efficiency.     

Spectroscopic elucidation of the interaction of native cyclodextrins and their acetylated derivatives with asymmetric monomethyne cyanine dye

Five novel complexes of asymmetric monomethyne cyanine dye (1), with α-, β-, γ-cyclodextrins and the corresponding functionalized derivatives, namely acetyl-β-(Ac-β-CD) and acetyl-γ-(Ac-γ-CD) cyclodextrins were studied by means of UV–VIS, linear-polarized infrared and fluorescence spectroscopy, as well as scanning electron microscopy, powder X-ray diffraction, and thermal methods both in solution and in solid-state. Computational chemistry methods were employed with the purpose of elucidating the electronic structure and vibrational properties of the organic dye.     

Liquid-liquid extraction of lysozyme using a dye-modified ionic liquid

An affinity-dye, Cibacron Blue 3GA (CB), derivatized organic salt [BMIM]3[CB] was synthesized for lysozyme extraction. This compound was formed by mixing an ionic liquid (IL) [BMIM][Cl] and the silver salt of CB. Liquid-liquid extractions of lysozyme from the aqueous and [BMIM]3[CB] in [BMIM][PF6] solutions were examined in this study. The transfer of lysozyme from the aqueous phase to the IL phase decreased while the pH of the aqueous phase increased. An extraction higher than 90% was observed at pH 4. Under a high ionic strength, the lysozyme would transform back from the IL phase into the aqueous phase. Lysozyme molecules were almost quantitatively recovered from the IL phase to the aqueous solutions of 1M KCl under pH 9-11. It appeared that the extraction was specific for lysozyme in contrast to cytochrome c, ovalbumin, and bovine serum albumin. The extraction efficiency of the IL phase remained essentially the same after eight cycles of extraction.     

Asymmetric reactions with cyclodextrins

Cyclodextrins have great potential for exploitation as a useful tool for asymmetric induction. Many kinds of asymmetric reaction have been achieved in the presence of cyclodextrin under various conditions such as the solid phase, heterogeneous suspension or homogeneous aqueous or organic solution. Complexation is essential for asymmetric induction. What is necessary to improve CDs for greater asymmetric induction?     

Complexation of tyrosol with cyclodextrins

Tyrosol (TY), 4-(2-hydroxyethyl)phenol, is an olive oil biophenol with antioxidant activity and positive effects on human health. This study has investigated the interactions of TY with cyclodextrins (CD) and a CD polymer. Complexation of TY with β-CD, hydroxypropyl-β-CD (HP-β-CD), and methyl-β-CD (Me-β-CD) has been evaluated both in aqueous solution and in the solid state. The techniques employed in solution to determine the apparent stability constants of the respective complexes were fluorescence and UV–visible spectroscopies. Complexation with β-CD and its derivatives involved an increase of both the UV absorbance and the intrinsic fluorescence of TY; a bathochromic shift of the UV spectrum was detected as well. The apparent stability constants obtained with native β-CD, Me-β-CD and HP-β-CD presented similar values. Complexes in the solid state were obtained by coevaporation and kneading. They were characterised by X-ray diffraction analysis and differential thermal analysis. The interaction of TY with β-CD led to a crystalline complex; the same diffraction pattern was obtained by coevaporation and kneading. The complexes obtained with methyl- and HP-β-CD were amorphous irrespective of the preparation method. In addition, the retention of TY in an insoluble polymer of CD crosslinked with epichlorohydrin has been quantified. In approximately 20 min, 1 mg of TY per gram of polymer was retained.     

A spectroscopic and molecular modeling studies of the inclusion complexes of orciprenaline and terbutaline drugs with native and modified cyclodextrins

The inclusion complexation behavior of orciprenaline (ORC) and terbutaline (TER) with α-CD, β-CD, HP-α-CD and HP-β-CD are examined by absorption, fluorescence, life time and molecular modeling methods. ORC and TER forms 1:1 (CD/drug) inclusion complexes in lower CD concentrations and 1:2 (CD/drug) inclusion complexes with higher CD concentrations. The inclusion of both drugs with HP-CDs was stronger than that of native CDs. Both drugs exhibit dual emission (excimer) in the CD solution, whereas in water single emission is seen. The hydrogen bonding and van der Waals interaction between the drugs and the CD plays an important role in the inclusion complexes. Computational results show the side chain of the drugs encapsulated in the CD cavity. The molecular modeling results by PM3 were in good agreement with the experimental results.     

Enrofloxacin inclusion complexes with cyclodextrins

Inclusion complexes using α-, β-, γ-, and hydroxypropyl-β-CD (HP-β-CD) were produced with the antibiotic enrofloxacin, with the aim of increasing its solubility by complexation. Phase solubility diagrams were obtained, to confirm the formation of inclusion complexes, and to determine the solubility enhancement and stability constant of each complex. Enrofloxacin inclusion in β-CD showed the highest value of the complex stability constant (35.56?mmol?L^?1), but the greatest increase in solubility was obtained using HP-β-CD reaching a 1258% increase over enrofloxacin solubility in the absence of CD. The order of highest enrofloxacin solubility achieved was: HP-β-CD?>?α-CD?>?γ-CD?>?β-CD. In addition, formation of complexes was confirmed by differential scanning calorimetry and thermogravimetry, applied to the complexes obtained by the kneading technique. The influence of citric acid, alone or as an adjunct of β-CD, on the solubility of enrofloxacin was also determined. A solution of 15?mmol?L^?1 citric acid dissolved 10?g?L^?1 of enrofloxacin, but a gradual increase in β-CD concentration in the presence of citric acid did not increase the degree of solubilization of enrofloxacin.     

Rupturing polymeric micelles with cyclodextrins

Small-angle neutron scattering has been used to investigate the associative structures formed by triblock copolymers of poly(ethylene oxide) (PEO)-polypropylene oxide (PPO)-poly(ethylene oxide) (PEO) (also known as Pluronics) and to monitor the structural changes occurring upon complexation with heptakis(2,6-di-O-methyl)-beta-cyclodextrin (hbeta-CD) over the temperature range from 5 to 70 degrees C. At low temperature, the Pluronics are dispersed as unimers. Close to ambient temperature, the hydrophobicity of PPO causes the aggregation of the polymers into spherical micelles with core sizes between 40 and 50 A and a high inclusion of solvent. The aggregation number increases with temperature as the hydrophobicity of the core is gradually enhanced. hbeta-CD spontaneously forms pseudopolyrotaxanes with the triblock copolymers either when in their unimer form or micellized. The complexation results in an increase in the effective critical micellar concentration. It is suggested that the cyclodextrins thread onto the polymer backbone to localize preferentially on the central PPO block, therefore improving its water solubility. At temperatures where the polymers exist in micellar form, complexation with hbeta-CD gives rise to a complete disruption of the aggregates. These processes are highly temperature-dependent. Above 50 degrees C, the break-up of the aggregates is inhibited, and large-scale aggregation is observed.     

Visible-light responsive dye-modified TiO2 photocatalyst

A series of dye-modified TiO₂ photocatalysts were synthesized using dye Chrysoidine G (CG), tolylene-2,4-diisocyanate (TDI), and commercial TiO₂ (Degussa P25) as starting materials. TDI was used as a bridging molecule whose two -NCO groups reacted with Ti-OH of TiO₂ and -NH₂ groups of CG, respectively. As a result, special organic complexes were formed on the TiO₂ surface via stable π-conjugated chemical bonds between TiO₂ and dye molecules, confirmed by FT-IR, XPS, and UV-vis spectra. Due to the existence of π-conjugated surface organic complexes, the as-synthesized photocatalysts showed a great improvement in visible absorption (400-550 nm). Methylene blue, as a photodegradation target, was used to evaluate the photocatalytic performance, and the dye-modified TiO₂ exhibited much better activity under the visible light irradiation than bare TiO₂.     

Structural diversity in native cyclodextrins/folic acid complexes--from [2]-rotaxane to exclusion compound

The formation of different complexes of folic acid depending on the size of the host cyclodextrin resulting in either an exclusion compound (with the smallest α-cyclodextrin) or 2-rotaxane, where cyclodextrin is threaded over folic acid (with β- and γ-cyclodextrins), is presented. The formation is carried out in water which allows both possible application in pharmaceutical sciences and usage of environmentally friendly "green chemistry". The obtained compounds are thoroughly characterized using one and two dimensional NMR, mass spectrometry, differential scanning calorimetry and thermogravimetric analysis.     

The interactions of surfactant viologens with cyclodextrins

N-ethyl-N-hexadecyl-4,4-bipyridinium bromide (C₁₆VBr₂) andN-ethyl-N-octadecyl-4,4-bipyridinium bromide (C₁₈VBr₂) were used as electroactive probes to assess the interactions between surfactants and cyclodextrins. Cyclic voltammetry, visible spectroscopy, fluorescence spectroscopy and surface tension techniques were used to detect the formation of complexes between the surfactant viologen probes and- and-cyclodextrins. The voltammetric results suggest the formation of inclusion compounds in which the hydrophobic tail of the surfactant viologens penetrate the cyclodextrin cavity. The dimerization of the viologen cation radicals is essentially suppressed by the presence of-cyclodextrin (ACD) while no effects are observed in the presence of-cyclodextrin (BCD). The observed results are best explained by the relative solubility in aqueous media of each of the inclusion complexes in the several accessible viologen oxidation states.     

The interaction of solvatochromic pyridiniophenolates with cyclodextrins

The interactions of six solvatochromic pyridiniophenolate dyes with α- and β-cyclodextrins were investigated with the aid of UV-vis and ¹H NMR spectroscopies, and molecular dynamics simulations. The deduced mode of encapsulation of these dyes within the hydrophobic host cavity was employed as a measure of the relative contributions of the donor and acceptor moieties to their solvatochromic properties.     

Inclusion complexes of melatonin with modified cyclodextrins

The solubility of melatonin (MT) was improved with the addition of modified cyclodextrins (CDs). The solubilities of MT in the presence of β-cyclodextrin (β-CD), hydroxypropyl-β-cyclodextrin (HP-β-CD), mono-6-O-maltosyl-β-cyclodextrin (mono-G₂-β-CD), methyl-β-cyclodextrin (Me-β-CD), and sulfobutylether-β-cyclodextrin (SBE-β-CD) were higher than that of MT itself. In particular, the solubility of MT in the presence of SBE-β-CD was 11 times higher than that of MT itself. The stability constant (K) obtained based on the fluorescence intensity was 490 L/mol for the MT/SBE-β-CD inclusion complex. The structure of the MT/SBE-β-CD complex in aqueous solution was examined by ¹H–¹H rotating frame nuclear overhauser effect spectroscopy NMR. A 5-methoxy moiety of MT was included from the secondary hydroxyl face of SBE-β-CD. The MT/SBE-β-CD inclusion complex was prepared by the freeze-drying method. The results of X-ray diffraction and differential scanning calorimetry confirmed the formation of the complex in solid.     

Quantitative Supramolecular Heterodimerization for Efficient Energy Transfer

The challenge of quantitatively forming self‐assembled heterodimers without other equilibrium by‐products is overcome through self‐sorting favored by the introduction of designed shape‐complementary moieties. Such a supramolecular strategy based on cucurbit[8]uril‐directed dimerization is further applied to generate hetero‐chromophore dimers quantitatively, leading to efficient energy transfer (>85 %) upon photoexcitation.     

Inclusion-dependent mechanism of modification of cyclodextrins with heterocycles

Mono(6-deoxy-dimethylpyridinium)-β-cyclodextrins have been synthesized in reaction of mono (p-toluenesulfonyl) derivative of β cyclodextrin with the appropriate lutidine under microwave irradiation and conventional conditions. The results indicate that the mechanism consists of inclusion complex formation.     

Carbon paste electrodes electrochemically modified with cyclodextrins

Cyclic voltammetry was used in order to obtain carbon paste electrodes (CPEs) modified with α- and β-cyclodextrins (CPE_α-CD, CPE_β-CD) in HClO₄ media as electrolyte. The modified CPEs were obtained by applying 30 potential cycles, thus forming on the substrate a film with electroactive characteristics; a rise in current for the anodic and cathodic peaks became apparent as the number of cycles increased. Such behaviour confirmed the CPE modification by the species mentioned. The CPE_α-CD and CPE_β-CD exhibited significant stability before various electrolytes. In order to evaluate the sort of modification attained on the CPEs, a study was conducted, varying the potential scan rate, that confirmed the CD's presence. The modified electrodes were used to determine Pb(II) ions in solution within the range from 1×10^–5 M up to 1×10^–3 M. The CPE_α-CD and CPE_β-CD electrochemical response was studied by means of anodic stripping voltammetry of the Pb(II) ions, thereby giving a linear relation between the current for the anodic peak as a function of Pb(II) concentration with r ²=0.996 for the CPE_β-CD and 0.992 for the CPE_α-CD. Electronic Publication