Applicability of 0.05 mol kg(-1) potassium hydrogen phthalate as reference value pH standard in water-organic solvent mixtures

The applicability of 0.05 mol kg(-1) potassium hydrogen phthalate (KHPh(S), S=the solvent under study) as reference value pH standard (RVS) was studied in water-organic solvent mixtures. Phthalic acid in various aqueous organic solvent mixtures was titrated potentiometrically with Bu(4)NOH (MeOH), using a pH-ISFET and a glass electrode as pH-sensors, and the buffer capacity of the HPh(-) solution was roughly estimated from the difference between the first and second half-neutralization potentials. The influence of potassium ion to the buffer capacity was also studied, titrating KHPh and Et(4)NHPh with CF(3)SO(3)H and Bu(4)NOH (MeOH) and comparing the titration curves. The KHPh solution loses its buffer capacity if the solvent mixture has an aprotic property. For aqueous mixtures of protophilic aprotic solvents (e.g. DMSO and DMF), it is unsuitable as RVS if the water content is less than ca. 40 (v/v)%. The necessity of selecting subsidiary pH standard(s) is suggested for the solvent systems in which KHPh is inapplicable.     

Reference value standards for pH measurements in 10, 30, 50, and 70% (w/w) 2-propanol/water solvent mixtures at temperatures from 288.15 to 318.15 K

Reference value standards, pH (RVS), for 0.05 mol kg^?1 potassium hydrogenphthalate (KHPh) reference buffer solutions in 10, 30, 50 and 70% (w/w) 2-propanol/water solvent mixtures at temperatures from 288.15 to 318.15 K are determined from reversible e.m.f. measurements of the cell Pt¦H₂¦KHPh + KCl¦AgCl¦Ag¦Pt. The consistency of the present results is confirmed by multilinear regression analysis of the pH values obtained for each solution composition and temperature, allowing appropriate interpolation of pH (RVS) values within the range of the experiment. The ancillary values of the standard e.m.f. of the cell Pt¦H₂¦HCl¦AgCl¦Ag¦Pt are optimized through multilinear regression analysis of the available data in the literature, and the ancillary values of the first ionization constant of o-phthalic acid (H₂Ph; benzene-1,2-dicarboxylic acid) in these solvent mixtures are evaluated from reversible e.m.f. measurements of the cell Pt¦H₂¦H₂Ph + KHPh + KCl¦AgCl¦Ag¦Pt.     

Synthesis and thermodynamic properties of a metal-organic framework: [LaCu6(μ-OH)3(Gly)6im6](ClO4)6

A metal-organic complex, which has the potential property of absorbing gases, [LaCu₆(μ-OH)₃(Gly)₆im₆](ClO₄)₆ was synthesized through the self-assembly of La³⁺, Cu²⁺, glycine (Gly) and imidazole (Im) in aqueous solution and characterized by IR, element analysis and powder XRD. The molar heat capacity, C_p,m, was measured from T = 80 to 390 K with an automated adiabatic calorimeter. The thermodynamic functions [H_T − H_298.15] and [S_T − S_298.15] were derived from the heat capacity data with temperature interval of 5 K. The thermal stability of the complex was investigated by differential scanning calorimetry (DSC).     

Tris-chelate complexes with chiral ligands: In search of diastereoisomeric selectivity with remote stereogenic centres

The chiral ligands, 4,4′-bis{(1S,2R,4S)-(−)-bornyloxy}-2,2′-bipyridine, (1S,2R,4S)-1, and 4,4′-bis{(1R,2S,4R)-(+)-bornyloxy}-2,2′-bipyridine, (1R,2S,4R)-1, have been prepared and characterized by spectroscopic techniques and, for (1S,2R,4S)-1, by single crystal X-ray diffraction. Despite the use of enantiomerically pure ligands, the formation of the complexes [Fe((1S,2R,4S)-1)₃]²⁺, [Ru((1S,2R,4S)-1)₃]²⁺, [Ru((1S,2R,4S)-1)(bpy)₂]²⁺ and [Ru((1R,2S,4R)-1)(bpy)₂]²⁺ proceeds without preference for either the Δ or Λ-diastereoisomers.     

Determination of glyphosate by ion chromatography

An ion chromatography system for the determination of glyphosate was described. Ion chromatograph was carried out by suppressed conductivity detection (DX-100). The eluent contained 9 mmol l⁻¹ Na₂CO₃ and 4 mmol l⁻¹ NaOH. The detection limit was 0.042 μg ml⁻¹ (S/N=3). The relative standard deviation was 1.99% and the correlation coefficient of the calibration curve for area was 0.9995. The linear range was 0.042100 μg ml⁻¹. Common inorganic ion and organic acids did not interfere. The recovery was 96.4103.2%. The method was simple, rapid, reliable and inexpensive.     

Catalytic and structural studies of Rh complexes of (−)-(2S,4S)-2,4-bis(diphenylphosphino)pentane. Asymmetric hydrogenation of acetophenonebenzylimine and acetophenone

Rhodium(I) complexes formed by (−)-(2S,4S)-2,4-bis(diphenylphosphino)pentane (BDPP) are efficient catalysts for the hydrogenation of acetophenone and acetophenonebenzylimine. The composition of the solvent mixture and the reaction temperature have a marked influenced on the enantioselectivity. These effects are thought to be related to the enhanced conformational flexibility of six-membered rings when simple substrates without functional groups are coordinated to the rhodium. X-ray crystallographic studies reveal that in [Rh((S,S)-BDPP)NBD]⁺ (1) the ligand is in a chair conformation, and that in [Rh((S,S)-BDPP)COD]⁺ (2) the chelate ring is in a δ-skew conformation. Studies of Rh((S,S)-BDPP)(NBD)Cl (3) in solution indicate a trigonal bipyramidal structure with a chair conformation of the ring in aromatic solvents and a conformationally labile ring in methanol.     

Oxidatively stable and highly proton conductive membrane from poly(arylene ether)s containing biphenyl moiety as pendent groups

Novel poly(arylene ether)s with sulfonic acid groups attached onto pendent biphenyl rings were successfully synthesized by the nucleophilic displacement of aromatic dihalides with bisphenols in aprotic solvent in the present of excess potassium carbonate, followed by sulfonation with chlorosulfonic acid. The sulfonation took place only on the pendent biphenyl rings due to the specially designed molecular structure. The sulfonated polymers were very soluble in common organic solvents, such as dimethyl sulfoxide, N,N′-dimethylacetamide, dimethylformamide, and can be readily cast into tough and smooth films. These membranes showed excellent stabilities resistance to both oxidation and hydrolysis, as evidenced by subjecting to both Fenton's reagent test and immersion in boiling water. The proton conductivities (3.2 × 10⁻³ S cm⁻¹) of the as-made membranes were higher than that of Nafion^® 117 (1.9 × 10⁻³ S cm⁻¹) under same conditions. The satisfied properties of these new polymers demonstrated them as promising candidates for proton exchange membrane in PEM fuel cell applications.     

Heat capacity of copper hydride

The heat capacity of copper hydride has been measured in the temperature range 2–60 and 60–250 K using two adiabatic calorimeters. Special procedure for the purification of CuH has been applied and a careful analysis of sample contamination has been performed. The experimental results have been extrapolated up to 300 K due to instability of the copper hydride at room temperature. From the temperature dependence of heat capacity the values of entropy S°(T), thermal part of enthalpy H°(T)−H°(0) and Gibbs function [−(G°(T)−H°(0))] have been calculated assuming S°(0)=0. The standard absolute entropy, standard entropy of formation from the elements and enthalpy of decomposition of copper hydride from the elements have been calculated and found to be 130.8 J K⁻¹ mol⁻¹ (H₂), −85.1 J K⁻¹ mol⁻¹ (H₂), −55.1 kJ mol⁻¹ (H₂), respectively. These new results gave the possibility of discussion on thermodynamic properties of copper hydride. Debye temperature has been for the first time determined experimentally.     

Heat capacities of NaNO3 and KNO3 from 350 to 800 K

The heat capacities of NaNO₃ and KNO₃ were determined from 350 to 800 K by differential scanning calorimetry. Solid-solid transitions and melting were observed at 550 and 583 K for NaNO₃ and 406 and 612 K for KNO₃, respectively. The entropies associated with the solid-solid transitions were measured to be (8.43± 0.25) J K⁻¹ mole⁻¹ for NaNO₃ and (13.8±0.4) J K⁻¹ mole⁻¹ for KNO₃. At 298.15 K the values of C⁰_P S⁰_P, {H⁰(T)-H⁰(0)}/T and -{G⁰(T)-H⁰(0)}/T, respectively, are 91.94, 116.3, 57.73, and 58.55 J K⁻¹ mole⁻¹ for NaNO₃ and 95.39, 133.0, 62.93, and 70.02 J K⁻¹ mole⁻¹ for KNO₃. Values for S⁰_T, {H⁰(T)-H⁰(0)}/T, and -{G⁰(T)-H⁰(0)}/T were calculated and tabulated from 15 to 800 K for NaNO₃ and KNO₃.     

Simultaneous determination of trace uranium(VI) and zinc(II) by adsorptive cathodic stripping voltammetry with aluminon ligand

Uranium(VI) complexed with aluminon (3-[bis(3-carboxy-4-hydroxy-phenyl)methylene]-6-oxo-1,4-cyclohexadiene-1-carboxylic acid triammonium salt) was determined by adsorptive cathodic stripping voltammetry (ACSV) using a hanging mercury drop electrode. Trace uranium(VI) and zinc(II) can be simultaneously determined in a single scan in the presence of aluminon and urea. Optimal conditions were found to be: accumulation time; 180–200 s, accumulation potential; 50 mV versus Ag/AgCl, scan rate; 40 mV s⁻¹, supporting electrolyte; 0.1 M sodium acetate buffer at pH 6.5–7.0, and concentration of aluminon; 1×10⁻⁶ M. The linear range of uranium(VI) and zinc(II) were observed over the concentration range 2–33 and 30–120 ng ml⁻¹, respectively. The detection limit (S/N=3) are 0.2 ng ml⁻¹ (uranium) and 30 ng ml⁻¹ (zinc). A good reproducibility shows RSDs of 2.5–4.0% (n=10). The procedure offers high selectivity, with the presence of urea masking some metal ions.     

Capillary electrophoresis of methylmercury with injection by sample stacking

A procedure for separation and quantitation of methylmercury by capillary electrophoresis using sample stacking as the injection technique is presented. The CE conditions have been optimized in order to separate the methylmercury from the excess cysteine peak and to concentrate large volumes of sample obtaining a low detection limit. Under the proposed operational conditions, the detection limit (S/N = 3) was 12 ng g⁻ and the limit of quantitation (S/N = 10) was 20 ng g⁻¹ with a linear range of 20–100 ng g⁻¹ (as methylmercury in samples). The method was tested using different reference materials with a certified methylmercury content.     

Preparation of novel ion exchange polyurethane foam and its application for separation and determination of palladium in environmental samples

The new strong anion exchanger (PUFIX) from polyurethane foam was prepared by coupling of the primary amine of the foam matrix with ethyl iodide. PUFIX was characterized using different tools (IR spectra, elemental analysis, density and thermal analysis). The sorption properties of the new anion exchanger (PUFIX) and chromatographic behaviour for separation and determination of palladium(II) ions at low concentrations from aqueous iodide or thiocyanate media were investigated by a batch and dynamic processes. The maximum sorption of Pd(II) was in the pH range of 0.3–2. The kinetics of sorption of the Pd(II) by the PUFIX was found to be fast with average values of half-life of sorption (t_1/2) of 3.32 min. The variation of the sorption of Pd(II) with temperature gives average values of ΔH, ΔS, ΔG and ΔE to be −38.3 kJ mol⁻¹, −100.7 J K⁻¹ mol⁻¹, −8.3 and 11.8 kJ mol⁻¹, respectively. The sorption capacity of PUFIX was 1.69 mmol g⁻¹ for Pd(II), preconcentration factors of values ≈250 and the recovery 99–100% were achieved (R.S.D. ≈ 1.24%). The lower detection limit, 1.28 ng mL⁻¹ was evaluated using spectrophotometric method (R.S.D. ≈ 2.46%).     

Experimental study and modelling using the ERAS-Model of the excess molar volume of acetonitrile–alkanol mixtures at different temperatures and atmospheric pressure

Densities of {(1−x)CH₃(CH₂)_n−1OH + xCH₃CN} for n=1, 2, 3 or 4 have been determined as a function of composition at 288.15, 293.15, 298.15 and 303.15 K at atmospheric pressure using a vibrating-tube densimeter (Anton Paar DMA 4500, resolution 1×10⁻⁵ g cm⁻³). Excess molar volumes were calculated. The V_m^E values were negative for acetonitrile–methanol mixtures and sigmoid for acetonitrile–alkanols (C₂–C₄) mixtures over the complete mole fraction range. V_m^E values increase in a positive direction with increase in chain length of the alkanols and with the temperature. The Extended Real Associated Solution Model (ERAS-Model) calculations allowing for self-association for the alkanols and complex formation between acetonitrile and alkanols have been used to correlate experimental data. The model is able to reproduce the asymmetrical V_m^E behavior of the studied systems, although agreement between theoretical and experimental values is less satisfactory for some concentration ranges.     

Flow injection visible diffuse reflectance quantitative analysis of nickel

Flow injection (FI) methodology, using diffuse reflectance in the visible region of the spectrum, for the analysis of nickel, precipitated in the form of dimethylglyoximate, is presented. A reflectance cell, constructed in polytetrafluoroethylene, using a LED (light emitting diode) as light source and a LDR (light dependent resistor) as detector, is described. The analytical signal (S) correlates with nickel concentration (C) between 1.6 × 10⁻⁴ and 6.6 × 10⁻⁴ mol L⁻¹. This correlation is described by the equation S = −1.108 + 3.314 × 10⁴C − 2.081 × 10⁷C² (r = 0.9996). The experimentally observed limit of detection is about 1.3 × 10⁻⁴ mol L⁻¹, as in lower concentrations the formation of precipitate is not observed. The experimental quantitation limit is about 1.6 × 10⁻⁴ mol L⁻¹. The mean R.S.D. (relative standard deviation) is about 2.7%. Samples containing nickel were analyzed and the results obtained in this method were compared with those of other methods using the statistical Student's t-test.     

New applications of azamacrocyclic ligands in ion recognition, transport and preconcentration of palladium

This work deals with the evaluation of a synthesized 15-membered triolefinic azamacrocycle containing a NH group, (E,E,E)-1,6-bis(p-tolylsulfonyl)-1,6,11-triazacyclopentadeca-3,8,13-triene (R₂NH), for the selective extraction of palladium and platinum from aqueous chloride matrices prior their analysis by ICP-AES. The optimal conditions for liquid–liquid experiments have been evaluated, with special emphasis given to the selection of the organic solvent and the optimal aqueous chloride concentration for the extraction of PdCl₄²⁻ and PtCl₆²⁻. The selective transport and separation of palladium(II) from a mixture of Pd(II) and Pt(IV) was accomplished by means of a supported liquid membrane system containing the macrocycle as carrier dissolved in anethol and 0.5 M thyocianate solution as stripping solution. A C18 cartridge has been activated with the reagent R₂NH in order to test the feasibility of achieving the preconcentration of palladium solutions. Enrichment factors close to the theoretical ones were obtained with the designed system and using thiourea as eluting solution.     

An on-line flow-injection microwave-assisted mineralization and a precipitation/dissolution system for the determination of molybdenum in blood serum and whole blood by electrothermal atomic absorption spectrometry

An on-line flow injection (FI) precipitation–dissolution system with microwave-assisted sample digestion has been developed for the electrothermal atomic absorption spectrometry (ETAAS) determination of trace or ultratrace amounts of molybdenum in human blood serum and whole blood samples. After the exposure of the sample to microwave radiation, the on-line precipitation of molybdenum was achieved by the merging-zone of a 0.5-ml plug of sample with a plug of potassium ferrocyanide, which were carried downstream with a solution of 0.5 mol l⁻¹ of HNO₃. The interfering effects of iron and copper were minimized by the introduction of a flow of a 5% (w/v) sodium potassium tartrate (for iron) and 2% (w/v) of thiourea (for copper and zinc) in a 5% (v/v) ammonia and 2% (v/v) ammonium chloride solution previous to the precipitation reaction. The reddish-brown precipitate of molybdenyl ferrocyanide was collected on the walls of a knotted reactor. The precipitate was dissolved with the introduction of 1 ml of a 3.0 mol l⁻¹ NaOH solution and the best performance in terms of detection limit and precision was achieved when a sub-sample of 140 μl was collected in a capillary of a sampling arm assembly, to introduce 20 μl volumes into the atomizer by means of positive displacement with air through a time-based injector. A detection limit (3σ) of 0.1 μg Mo l⁻¹ using an aqueous standard solution was obtained. The method is quantitative and is applied over the range 0.2–20.0 μg Mo l⁻¹. The precision of the method evaluated by ten replicate analyses of aqueous standard solutions containing 0.5 and 1.0 μg Mo l⁻¹ was 2.8 and 3.1% (relative standard deviation, RSD) (for n=5), respectively. Whereas, the precision evaluated by five replicate analysis of a serum and a whole blood sample were 3.3 and 3.8% RSD. An enrichment factor of ca. 3.5 was achieved with the introduction of 0.5 ml aqueous standard solutions at a sample flow rate of 1.0 ml min⁻¹. Recoveries of spiked molybdenum in blood serum and whole blood were in the ranges 96–102 and 94–98%, respectively. The results obtained for two human whole blood certified reference materials were in good agreement with the indicative values.     

Effect of temperature on the photophysics of rhodamine 101 in a polar solvent

The absorption and emission properties of rhodamine 101 in polar, aprotic propionitrile-butyronitrile (4:5 v/v) solvent have been investigated. The equilibrium between the neutral zwitterionic and lactonic (colourless) forms is strongly affected by the temperature in the range 293–144 K. In dilute solution (1.12×10⁻⁵M), at room temperature the lactonic form is 98%, while at 144 K the zwitterionic form predominates, being 79%. These findings are discussed in terms of differential stabilization of the lactonic and zwitterionic forms through non-specific solute-solvent interactions involving the COO⁻¹ group.     

以苯荒酸为配体的[Bu4N]2[W2Ag3S8(C6H5CSS)]钨银硫簇合物的合成和晶体结构

标题化合物由(C₆H₅CSS)^-(Bu₄N)⁺、AgNO₃和(NH₄)₂WS₄、Bu₄NBr反应制备,用X射线单晶衍射法测定其晶体结构。     

Measurements of Rayleigh scattering and relativistic calculations of incoherent scattering functions

Recent measurements of Rayleigh scattering employing neutron capture γ-rays are presented. Experimental conditions are achieved such that the Rayleigh contribution is dominant and much larger than the other competing coherent processes. A detailed comparison with the modified relativistic form factor (MRFF) approximation is made and it is concluded that the latter overestimates the cross-section by 3–4%. New calculations of S, the incoherent scattering function, are presented in the relativistic treatment of Ribberfors and Berggren, using multiconfiguration Dirac–Fock relativistic wavefunctions. Tables of S, for Z=1–110, are shown on a momentum transfer mesh identical to previous non-relativistic calculations. S has been calculated at a representative angle θ=60° and energies compatible with the presentation mesh. For other scattering angles, the values presented in the tables are accurate to within 1–2% for momentum transfers larger than 0.1 Å⁻¹. In the region below 0.1 Å⁻¹ the accuracy worsens with decreasing momentum transfer, reaching 6% at 0.01 Å⁻¹ and 10% at 0.005 Å⁻¹. The same multiconfiguration wave functions were used to evaluate new MRFFs. The new elastic scattering cross sections differ by 3–6% compared with calculations based on single configuration wave functions.     

Metal complexes of biologically important ligands: Synthesis of amino acidato complexes of Pd containing a C,N-cyclometallated group as an ancillary ligand

New amino acidato complexes of Pd^II of stoichiometry [Pd(C---N)(Aa)] (C---N=C,N-cyclometallated ligand, Aa = N,O-amino acidato ligand) have been obtained by reaction of [Pd(C---N)(acac)] (C---N=N,N-dimethylbenzylamine-C²,N (dmba) (1) or N,N-dimethyl(S--phenylethyl)amine-C²,N (S-dmphea) (2)) with glycine, chiral amino acids (alanine, phenylalanine and valine), and amino acid derivatives (N-acetylglycine and N-acetyl-,β-dehydroalanine) in MeOH. The compounds are characterized by IR, ¹H and ¹³C NMR. The geometry of these complexes has been unambiguously determined by NOE difference experiments and NOESY measurements.