Homopolymers and copolymers of vinyl ethers of rosin-derived alcohols

Two vinyl ethers of rosin-derived alcohols were homopolymerized with free-radical and cationic initiators. A polymer was obtained from the vinyl ether of the alcohol from Foral in good conversion by free-radical initiators but it was not a high molecular weight product. Cationic initiators were more effective; boron trifluoride etherate proved to be best. All of the homopolymers were obtained as white powders with high crystallinity. Copolymerizations of the vinyl ethers and vinyl chloride have been studied with the use of free-radical initiators. Cationic-initiated copolymers of the vinyl ethers and isobutyl vinyl ether were studied. Those containing less than 20% of the rosin vinyl ethers were rubbery, of high molecular weight, and could be crosslinked with peroxide.     

Adducts of vinyl ethers with arylsulfenyl chlorides as reagents for electrophilic alkylation of vinyl ethers

Conclusions A general preparative method for the chemically selective codimerization of vinyl ethers has been developed, the first stage of which is addition of arylsulfenyl chloride to one vinyl ether and the second is an Ad_E reaction between the adduct obtained and the other vinyl ether in the presence of a Lewis acid followed by treatment of the intermediate with some nucleophile.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 119–125, January, 1987.     

Photodegradation in solution of copolymers of methyl vinyl ketone and methyl isopropenyl ketone with methyl methacrylate

Copolymers of methyl vinyl ketone (MVK) and methyl isopropenyl ketone (MIK) with methyl methacrylate (MMA), have been prepared covering the whole composition range. Reactivity ratios have been estimated as follows: MMA/MVK, r_MMA = 0·63 ± 0·2, r_MVK = 0·53 ± 0·2; MMA/MIK, r_MMA = 0·98 ± 0·2, r_MIK = 0·69 ± 0·2. Number average molecular weights have been measured during the course of photodegradation under 253·7 nm radiation in methyl acetate solution and rates of chain scission calculated. In each system the copolymers are less stable than the corresponding homopolymers, the rate passing through a maximum at 20–30% ketone content. These results have been discussed from a mechanistic point of view.     

Thermal stability of poly(vinyl bromide) and copolymers of vinyl bromide with methyl vinyl ketone

Thermal stability and degradation behaviour have been studied for PVB and VB-MVK copolymers spanning the whole composition range, using thermogravimetric analysis. The reactivity ratios in the radial copolymerization were determined by using an NMR technique, leading to r_i(VB) = 3.6 ± 0.2 and r₂(MVK) = 0.2 ± 0.1. The introduction of MVK units into the VB chain leads to an interaction with release of methyl bromide. The stability of the copolymers increases with increasing MVK concentration.     

Blends of poly(vinyl methyl ether) with styrenic copolymers

Blends of poly(vinyl methyl ether) (PVME) with styrene/acrylonitrile (SAN), with styrene/maleic anhydride (SMA), and with styrene/acrylic acid (SAA) copolymers were examined for glass transition and lower critical solution temperature behavior. These copolymers were found to be completely miscible with PVME at levels of 3% or less of AA; below 10–11% AN, and below 15% MA (w%). Small amounts of the comonomers raised the temperature at which blends with PVME undergo phase separation on heating. This effect was greatest in the order AA > AN > MA. An interpretation of these results is given in terms of recent theories for homopolymer-copolymer blends, and the extent to which solubility parameter theory can be useful is considered.     

Photooxidation of copolymers of fluorinated olefins and allyl or vinyl ethers

This article reports the results on the photooxidation mechanisms of two copolymers of fluorinated olefins and allyl or vinyl ethers. It is shown that the presence of the fluorine atoms influences strongly both the orientation of the reaction and the photooxidation kinetics. Due to the neighbouring fluorine atoms, the methylene groups in α-position of the oxygen of the ether groups are not equivalent regarding oxidation and the secondary carbon becomes more oxidable than the tertiary one. Because these unexpected results were obtained, the study has been extended to non fluorinated polyethers. On the basis of the results obtained, a general mechanism of the primary oxidation of polyethers is given, and the role played by the fluorine atoms on the orientation of the reactions is discussed.     

Esters of alternating copolymers of maleic or 2,3-dimethylmaleic anhydride with alkyl vinyl ethers

Maleic anhydride or 2,3-dimethylmaleic anhydride was copolymerized with a number of alkyl vinyl ethers, with AIBN as the initiator. The comonomers were always alternating and were obtained in yields ranging from 15 to 99%. The acid anhydride group in both series of copolymers was converted to the corresponding methyl esters in a two-step reaction. The structure of these polymers was established by elemental analysis and by infrared, ¹H-and ¹³C-NMR spectroscopy. Addtional characterization of these copolymers were carried out by viscosity measurements, differential scanning calorimetry for the determination of glass transition temperatures, and thermal degradation for the determination of the thermal stability of the copolymers.     

Thermal stability of copolymers of vinyl acetate and methyl acrylate

The thermal degradation of a series of copolymers of vinyl acetate and methyl acrylate and the two homopolymers poly(vinyl acetate) and poly(methyl acrylate) obtained using Ce(IV) as initiator has been investigated using differential thermal analysis (DTA) and thermogravimetry (TGA) in dynamic nitrogen. The kinetic parameters E, n, and A have been obtained following several methods of thermogravimetric analyses. The stability increases as the methyl acrylate content in the copolymer composition increases. The incorporation of 5 mol % of vinyl acetate in the copolymer produces a marked decrease in stability compared to the homopolymer poly(methyl acrylate). There is evidence for an intramolecular lactonization process in vinyl acetate—methyl acrylate copolymers.     

The thermal degradation of copolymers of vinyl acetate with methyl methacrylate and other monomers

The thermal degradation of copolymers of vinyl acetate with methyl methacrylate, styrene and ethylene has been investigated using thermal volatilization analysis and thermogravimetry, together with analysis of volatile and involatile degradation products. All three copolymer systems show some of the features characteristic of the homopolymers of the monomers concerned. There is evidence, however, for an intramolecular lactonization process in VA—MMA copolymers, involving reaction of adjacent VA and MMA units with elimination of methyl acetate. This reaction occurs less readily than the analogous process in vinyl chloride—MMA copolymers. Mechanisms of the various degradation reactions are discussed.     

Conversion of solid poly(methyl vinyl ether-alt-maleimide) to poly(methyl vinyl ether-alt-maleic anhydride)

Solid poly(methyl vinyl-alt-maleimide), when subjected to heating at 100°C while being vacuum pumped at 0.1 mm Hg pressure, was converted to a copolymer in which a substantial portion of the imide groups were converted to anhydride groups. Similarly, heating at 100°C at atmospheric pressure in a circulating air oven brought about the same reaction but at a faster rate. This confirms the hypothesis that the formation of maleic anhydride comonomer units from poly(methyl vinyl ether-alt-ammonium maleamate) not only proceeds directly by ring closure of amic acid formed by loss of ammonia but probably also includes, as a parallel pathway, hydrolysis by atmospheric moisture of maleimide comonomer units.     

Reaction of fluoroketones with vinyl ethers

Conclusions The reaction of perfluoroketones with alkylvinyl ethers leads to 2-alkoxy-4,4-bis(perfluoroalkyl) oxethanes, subsequent isomerization of which yielded-alkoxyvinyl-bis(perfluoroalkyl)carbinols.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 918–921, April, 1967.     

Zeolites as catalysts for the condensation of acetals with vinyl ethers

Synthetic zeolites may be used as catalysts for the condensation of acetals and ketals with vinyl ethers, leading to 1,1,3-trialkoxyalkanes. The Nd forms of dealuminized Y zeolites were found to be most efficient in this reaction.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 902–905, April, 1990.     

Chiral bifunctional organocatalysts in asymmetric aza-Morita-Baylis-Hillman reactions of ethyl (arylimino)acetates with methyl vinyl ketone and ethyl vinyl ketone

The bifunctional chiral phosphine Lewis base (R)-2'-diphenylphosphino-[1,1'-binaphthalene]-2-ol is an effective organocatalyst in the asymmetric aza-MBH reaction of ethyl (arylimino)acetates 1 with MVK and EVK to give the corresponding adducts in moderate to good yields and good to high enantiomeric excesses under mild conditions.     

Synthesis of end‐functionalized polymers and copolymers of cyclopentadiene with vinyl ethers by cationic polymerization

A series of cyclopentadiene (CPD)‐based polymers and copolymers were synthesized by a controlled cationic polymerization of CPD. End‐functionalized poly(CPD) was synthesized with the HCl adducts [initiator = CH₃CH(OCH₂CH₂X)Cl; X = Cl ( 2a ), acetate ( 2b ), or methacrylate] of vinyl ethers carrying pendant functional substituents X in conjunction with SnCl₄ (Lewis acid as a catalyst) and n‐Bu₄NCl (as an additive) in dichloromethane at −78 °C. The system led to the controlled cationic polymerizations of CPD to give controlled α‐end‐functionalized poly(CPD)s with almost quantitative attachment of the functional groups (F_n ∼ 1). With the 2a or 2b /SnCl₄/n‐Bu₄NCl initiating systems, diblock copolymers of 2‐chloroethyl vinyl ether (CEVE) and 2‐acetoxyethyl vinyl ether with CPD were also synthesized by the sequential polymerization of CPD and these vinyl ethers. An ABA‐type triblock copolymer of CPD (A) and CEVE (B) was also prepared with a bifunctional initiator. The copolymerization of CPD and CEVE with 2a /SnCl₄/n‐Bu₄NCl afforded random copolymers with controlled molecular weights and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight = 1.3–1.4). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 398–407, 2001