Cysteine adsorption on the Au(111) surface and the electron transfer in configuration of a scanning tunneling microscope: A quantum-chemical approach

Adsorption of two forms, molecule and radical, of amino acid L-cysteine (Cys) on the Au₁₂ cluster that simulates the (111) face of single-crystal gold is studied in the framework of the density functional theory. Effects of solvation of adsorbed Cys particles and lateral interaction in a monolayer are analyzed. The simulation predicts a commensurate adsorption energetics of the molecule and radical, with a difference between the “on-top,” “hollow,” and “bridge” positions. An analysis of lateral electrostatic interactions points to the stability of a cluster comprising six Cys particles, which conforms to the size of a fragment observed experimentally. Adsorption calculations are used to build three-dimensional isosurfaces (STM images), where the tungsten needle of the scanning tunneling microscope is simulated by a tungsten atom or by small clusters. The calculated images are sensitive to both the Cys shape and the orientation of adsorbed Cys particles. Calculation results are compared with fresh in situ submolecular-resolution STM data. Simulated images (with commensurate contributions made by sulfur atom and amino group) built for Cys radical adsorbed in the “on-top” position give best conformance to experiment.     

In-situ scanning tunneling microscopy of carbon monoxide adsorbed on Au(111) electrode

In-situ scanning tunneling microscopy (STM) coupled with cyclic voltammetry was used to examine the adsorption of carbon monoxide (CO) molecules on an ordered Au(111) electrode in 0.1 M HClO4. Molecular resolution STM revealed the formation of several commensurate CO adlattices, but the (9 x radical 3) structure eventually prevailed with time. The CO adlayer was completely electrooxidized to CO2 at 0.9 V versus RHE in CO-free 0.1 M HClO(4), as indicated by a broad and irreversible anodic peak which appeared at this potential in a positive potential sweep from 0.05 to 1.6 V. A maximal coverage of 0.3 was estimated for CO admolecules from the amount of charge involved in this feature. Real-time in-situ STM imaging allowed direct visualization of the adsorption process of CO on Au(111) at 0.1 V, showing the lifting of (radical 3 x 22) reconstruction of Au(111) and the formation of ordered CO adlattices. The (9 x radical 3) structure observed in CO-saturated perchloric acid has a coverage of 0.28, which is approximately equal to that determined from coulometry. Switching the potential from 0.1 to -0.1 V restored the reconstructed Au(111) with no change in the (9 x radical 3)-CO adlattice. However, the reconstructed Au(111) featured a pairwise corrugation pattern with two nearest pairs separated by 74 +/- 1 A, corresponding to a 14% increase from the ideal value of 65.6 A known for the ( radical 3 x 22) reconstruction. Molecular resolution STM further revealed that protrusions resulting from CO admolecules in the (9 x radical 3) structure exhibited distinctly different corrugation heights, suggesting that the CO molecules resided at different sites on Au(111). This ordered structure predominated in the potential range between 0.1 and 0.7 V; however, it was converted into new structures of (7 x radical 7) and ( radical 43 x 2 radical 13) on the unreconstructed Au(111) when the potential was held at 0.8 V for ca. 60 min. The coverage of CO adlayer decreased accordingly from 0.28 to 0.13 before it was completely removed from the Au(111) surface at more positive potentials.     

4-Mercaptopyridine on Au(111): a scanning tunneling microscopy and spectroscopy study

The adsorption of 4-mercaptopyridine (4MPy) molecules on reconstructed Au(111) is investigated by Scanning Tunneling Microscopy (STM) and Spectroscopy (STS) at low temperature and under ultra-high vacuum (UHV) conditions. As made visible by STM, at low coverage (<10%) 4MPy adsorbs preferentially at elbow sites of the Herringbone reconstruction and at step edges of the Au(111). Increasing coverage (but still <30%) results in formation of molecular chains followed, at even higher coverage, by a 3-dimensional growth. Detailed analysis of z-V spectroscopy (ramping the tunneling bias V while keeping the tunneling current constant) provides information on the bias dependent apparent height of a single 4MPy/Au(111) as well as on the local density of states (LDOS) of single and chain 4MPy molecules in comparison to the bare Au(111) surface revealing a significant shift of the lowest unoccupied molecular orbital (LUMO) towards lower energy for molecules within chains. Additionally, the data provide no evidence that for these samples prepared in UHV the adsorption of 4MPy on Au(111) requires mediating Au adatoms. Also, clear indications are given that the adsorption does not induce a strong reduction of the Au DOS close to its Fermi energy. Finally, in context of the apparent STM height of 4MPy molecules, the behavior of the differential barrier height Φ(diff)(V) = (?(z)?(V)I/?(V)I)(2) on bare Au(111) and 4MPy/Au(111) is analyzed and the corresponding experimental values are applied to recover the LDOS of the molecule for unoccupied states according to a previously published numerical recipe [B. Koslowski, H. Pfeifer and P. Ziemann, Phys. Rev. B, 2009, 80, 165419 and M. Ziegler, N. Néel, A. Sperl, J. Kr?ger, and R. Berndt, Phys. Rev. B, 2009, 80, 125402]. In this way, one obtains a spectrum comprising a constant DOS of the Shockley-like surface state of Au(111) and a Lorentzian line attributed to the LUMO of 4MPy.     

Investigation of the scanning tunneling microscopy image, the stacking pattern, and the bias-voltage-dependent structural instability of 1,10'-phenanthroline molecules adsorbed on Au(111) in terms of electronic structure calculations

A self-assembled monolayer of 1,10'-phenanthroline (phen) molecules on Au(111) was found to undergo a structural phase transition when the bias voltage is switched in scanning tunneling microscopy (STM) experiments (Phys. Rev. Lett. 1995, 75, 2376; Surf. Sci. 1997, 389, 19). The nature of two bright spots representing each phen molecule in the high-resolution STM images of phen molecules on Au(111) was identified by calculating the partial density plots for a monolayer of phen molecules adsorbed on Au(111) with tight-binding electronic structure calculations. The stacking pattern of chains of phen molecules on Au(111) was explained by studying the intermolecular interactions between phen molecules on the basis of first-principles electronic structure calculations for a phen dimer, (phen)(2). The structural instability of phen molecule arrangement caused by the bias-voltage switch was probed by estimating the adsorbate-surface interaction energy with the point-charge approximation for Au(111).     

Ordered molecular assemblies of substituted bis(phthalocyaninato) rare earth complexes on Au(111): in situ scanning tunneling microscopy and electrochemical studies

Substituted bis(phthalocyaninato) rare earth complexes ML2 (M = Y and Ce; L = [Pc(OC8H17)8]2, where Pc = phthalocyaninato) were adsorbed onto single crystalline Au(111) electrodes from benzene saturated with either YL2 or CeL2 complex at room temperature. In situ scanning tunneling microscopy (STM) and cyclic voltammetry (CV) were used to examine the structures and the redox reactions of these admolecules on Au(111) electrodes in 0.1 mol dm(-3) HClO4. The CVs obtained with YL2- and CeL2-coated Au(111) electrodes respectively contained two and three pairs of redox peaks between 0 and 1.0 V (versus reversible hydrogen electrode). STM molecular resolution revealed that YL2 and CeL2 admolecules were imaged as spherical protrusions separated by 2.3 nm, which suggests that they were oriented with their molecular planes parallel to the unreconstructed Au(111)-(1 x 1). Both molecules when adsorbing from approximately micromolar benzene dosing solutions produced mainly ordered arrays characterized as (8 x 5 radical3)rect (theta = 0.0125). The redox reactions occurring between 0.2 and 1.0 V caused no change in the adlayer, but they were desorbed or oxidized at the negative and positive potential limits. The processes of adsorption and desorption at the negative potentials were reversible to the modulation of potential. Electrochemical impedance spectroscopy (EIS) and CV measurements showed that YL2 and CeL2 adlayers could block the adsorption of perchlorate anions and mediating electron transfer at the Au(111) electrode, leading to the enhancement of charge transfer for the ferro/ferricyanide redox couple.     

Electrolyte gating in redox-active tunneling junctions--an electrochemical STM approach

We report on the construction of an asymmetric tunneling junction between a Au STM tip and a Au(111)-(1 x 1) substrate electrode modified with the redox-active molecule N-hexyl-N'-(6-thiohexyl)-4,4'-bipyridinium bromide (HS6V6) in an electrochemical environment. The experiments focused on the reversible one-electron transfer reaction between the viologen dication V(2+) and the radical cation V(+*). Employing the concept of "electrolyte gating" we demonstrate transistor- and diodelike behavior based on in situ scanning tunneling spectroscopy at constant or variable bias voltages. We derived criteria and verified that the experimental data could be represented quantitatively by a model assuming a two-step electron transfer with partial vibrational relaxation. The analysis illustrates that the magnitude of the tunneling enhancement depends on the initial redox state of HS6V6 (V(2+) or V(+*)). Characteristic parameters, such as reorganization energy, potential drop, and overpotential across the tunneling gap were estimated and discussed. We present a clear discrimination between the redox-mediated enhanced and the off-resonance tunneling currents I(enh) respective I(T) and distinguish between electron transfer in symmetric and asymmetric Au | redox-molecule | Au configurations.     

High-resolution scanning tunneling microscopy images of molecular overlayers prepared by a new molecular beam deposition apparatus with spray-jet technique

We developed a new molecular beam deposition apparatus using a spray-jet technique for high-quality thin film preparation of nonsublimable molecules. The apparatus was used to deposit chloro[tri-tert-butyl-subphthalocyaninato]boron(III) (TBSubPc) molecules on an Au(111) surface for analysis by low-temperature scanning tunneling microscopy (STM). Highly resolved images, in which tert-butyl groups in a TBSubPc molecule were clearly identifiable, were obtained. The image quality and the resolution of these images compared favorably well to STM images taken on reference samples which were sublimed onto Au (111) from a heated crucible.     

L-cysteine adsorption structures on Au(111) investigated by scanning tunneling microscopy under ultrahigh vacuum conditions

Adsorption structures formed upon vapor deposition of the natural amino acid L-cysteine onto the (111) surface of gold have been investigated by scanning tunneling microscopy under ultrahigh vacuum conditions. Following deposition at room temperature and at cysteine coverages well below saturation of the first monolayer, we found coexistence of unordered molecular islands and extended domains of a highly ordered molecular overlayer of quadratic symmetry. As the coverage was increased, a number of other structures with local hexagonal order emerged and became dominant. Neither of the room temperature, as-deposited, ordered structures showed any fixed rotational relationship to the underlying gold substrate, suggesting a comparatively weak and nonspecific molecule-substrate interaction. Annealing of the cysteine-covered substrate to 380 K lead to marked changes in the observed adsorption structures. At low coverages, the unordered islands developed internal order and their presence started to perturb the appearance of the surrounding Au(111) herringbone reconstruction. At coverages beyond saturation of the first monolayer, annealing led to development of a ( radical3 x radical3)R30 degrees superstructure accompanied by the formation of characteristic monatomically deep etch pits, i.e., the behavior typically observed for alkanethiol self-assembled monolayers on Au(111). The data thus show that as-deposited and thermally annealed cysteine adsorption structures are quite different and suggest that thermal activation is required before vacuum deposited cysteine becomes covalently bound to single crystalline Au(111).     

Scanning tunneling microscope imaging of (CH3S)2 on Cu(111)

Scanning tunneling microscope (STM) images of isolated molecules of dimethyl disulfide, (CH(3)S)(2), adsorbed on the Cu(111) surface were successfully obtained at a sample temperature of 4.7 K. A (CH(3)S)(2) molecule appears as an elliptic protrusion in the STM images. From density functional theory calculation, it was suggested that the bright part in the protrusion corresponds to the molecular orbital which is widely spread around H atoms in each CH(3) group in the (CH(3)S)(2) molecule. The STM images revealed that the molecules have a total of six equivalent adsorption orientations on Cu(111), which are given by the combination of three equivalent adsorption sites and two conformational isomers for each adsorption site.     

Observation of single dinuclear metal-complex molecules using scanning tunneling microscopy

We report a scanning tunneling microscopy (STM) investigation of a dinuclear organometallic molecule, trans-[Cl(dppe)2Ru(C[triple bond]C)6Ru(dppe)2Cl] (Ru2), absorbed on a Au(111) surface; this molecule is a potential candidate for use in molecular quantum-dot cellular automata (QCA) devices. Isolated Ru2 molecules were observed under ultra-high-vacuum conditions. Submolecular structure was clearly discernible in the STM images, with a bright feature corresponding to each of the two Ru-ligand complexes within the Ru2 molecule. Rotation and translation of the Ru2 molecules were observed to be induced by the STM tip under some tunneling conditions.     

Cluster and periodic DFT calculations: the adsorption of atomic nitrogen on M(111) (M = Cu, Ag, Au) surfaces

First-principle density functional calculations with cluster and slab models have been performed to investigate adsorption and thermally activated atomic nitrogen on M(111) (M = Cu, Ag, Au) surfaces. Optimized results indicate that the basis set of the N atom has a distinct effect on the adsorption energy but an indistinct one on the equilibrium distance. For the N/M(111) adsorption systems studied here, the threefold face centered cubic (fcc) hollow site is found to be the most stable adsorption site. The reason for the fcc site is that the perfected adsorption site has been explained by the density of states (DOS) analysis, that is, that N(2p) has the smallest DOS population near the Fermi level on the fcc site as compared with other adsorption sites. The variations of the adsorption energy as a function of adsorption site are similar and in the following order of N-M(111) binding strengths on a given site: Cu(111) > Ag(111) > Au(111). It is found that the N atom forms essentially an ionic bond for the most stable site. Large contributions between the M(ns) and N(2p) orbitals (n = 4, 5, and 6 for Cu, Ag, and Au, respectively) are found for the cluster model at the B3LYP/LANL2DZ-6-31G(d,p) level and also found in the slab DFT-GGA calculation results, which are the main characteristics of M-N bonds. At last, the dissociation of N2 on Cu(111) and Au(111) has also been obtained in this work, and the results showed that the dissociation of N2 on Cu(111) is more active than that on the Au(111) surface.     

Thiol with an unusual adsorption-desorption behavior: 6-mercaptopurine on Au(111)

A multitechnique study of 6-mercaptopurine (6MP) adsorption on Au(111) is presented. The molecule adsorbs on Au(111), originating short-range ordered domains and irregular nanosized aggregates with a total surface coverage by chemisorbed species smaller than those found for alkanethiol SAMs, as derived from scanning tunneling microscopy (STM) and electrochemical results. X-ray photoelectron spectroscopy (XPS) results show the presence of a thiolate bond, whereas density functional theory (DFT) data indicate strong chemisorption via a S-Au bond and additional binding to the surface via a N-Au bond. From DFT data, the positive charge on the Au topmost surface atoms is markedly smaller than that found for Au atoms in alkanethiolate SAMs. The adsorption of 6MP originates Au atom removal from step edges but no vacancy island formation at (111) terraces. The small coverage of Au islands after 6MP desorption strongly suggests the presence of only a small population of Au adatom-thiolate complexes. We propose that the absence of the Au-S interface reconstruction results from the lack of significant repulsive forces acting at the Au surface atoms.     

The nature of alkanethiol self-assembled monolayer adsorption on sputtered gold substrates

A detailed study of the self-assembly and coverage by 1-nonanethiol of sputtered Au surfaces using molecular resolution atomic force microscopy (AFM) and scanning tunneling microscopy (STM) is presented. The monolayer self-assembles on a smooth Au surface composed predominantly of [111] oriented grains. The domains of the alkanethiol monolayer are observed with sizes typically of 5-25 nm, and multiple molecular domains can exist within one Au grain. STM imaging shows that the (4 x 2) superlattice structure is observed as a (3 x 2) structure when imaged under noncontact AFM conditions. The 1-nonanethiol molecules reside in the threefold hollow sites of the Au[111] lattice and aligned along its [112] lattice vectors. The self-assembled monolayer (SAM) contains many nonuniformities such as pinholes, domain boundaries, and monatomic depressions which are present in the Au surface prior to SAM adsorption. The detailed observations demonstrate limitations to the application of 1-nonanethiol as a resist in atomic nanolithography experiments to feature sizes of approximately 20 nm.     

Scanning tunneling microscopy studies of pulse deposition of dinuclear organometallic molecules on Au(111)

Ultrahigh-vacuum scanning tunneling microscopy (STM) was used to study trans-[Cl(dppe)2Ru(C Triple Bond C)6Ru(dppe)2Cl] [abbreviated as Ru2, diphenylphosphinoethane (dppe)] on Au(111). This large organometallic molecule was pulse deposited onto the Au(111) surface under ultrahigh-vacuum (UHV) conditions. UHV STM studies on the prepared sample were carried out at room temperature and 77 K in order to probe molecular adsorption and to characterize the surface produced by the pulse deposition process. Isolated Ru2 molecules were successfully imaged by STM at room temperature; however, STM images were degraded by mobile toluene solvent molecules that remain on the surface after the deposition. Cooling the sample to 77 K allows the solvent molecules to be observed directly using STM, and under these conditions, toluene forms organized striped domains with regular domain boundaries and a lattice characterized by 5.3 and 2.7 A intermolecular distances. When methylene chloride is used as the solvent, it forms analogous domains on the surface at 77 K. Mild annealing under vacuum causes most toluene molecules to desorb from the surface; however, this annealing process may lead to thermal degradation of Ru2 molecules. Although pulse deposition is an effective way to deposit molecules on surfaces, the presence of solvent on the surface after pulse deposition is unavoidable without thermal annealing, and this annealing may cause undesired chemical changes in the adsorbates under study. Preparation of samples using pulse deposition must take into account the characteristics of sample molecules, solvent, and surfaces.     

Effect of adlayer structure on the host-guest recognition between calcium and crown-ether-substituted phthalocyanine arrays on Au single-crystal surfaces.

Adlayers of 15-crown-5-ether-substituted cobalt(II) phthalocyanine (CoCRPc) were prepared by immersion of either Au(111) or Au(100) substrate into benzene-ethanol (9:1 v/v) mixed solutions containing CoCRPc. In situ STM imaging was carried out after transferring the CoCRPc-modified Au crystals into aqueous HClO(4) solution. The packing arrangement of the CoCRPc array on Au(111) was determined to be p(8 x 4 radical 3R - 30 degrees ), and the internal structure was clearly observed by high-resolution STM. Two adlayer structures of CoCRPc, (8 x 9) and (4 radical 5 x 4 radical 5)R26.7 degrees, were found on the Au(100)-(1 x 1) terrace. In the presence of 1 mM Ca(2+), two Ca(2+) ions were trapped in two diagonally located 15-crown-5-ether moieties of each CoCRPc molecule on Au(111), whereas encapsulation of Ca(2+) ions was not seen in the CoCRPc arrays on the Au(100)-(1 x 1) surface. The present study demonstrates that the relationship between crown moieties of CRPc and the underlying Au lattice is important in the trapping of Ca(2+) ions in crown rings.     

Surface bonding and dynamical behavior of the CH3SH molecule on Au(111)

The chemisorption of the undissociated CH3SH molecule on the Au(111) surface has been studied at 5 K using scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. The molecule was found to adsorb on atop Au sites on the defect-free surface. CH3SH undergoes hindered rotation about the Au-S bond on the defect-free surface which is seen in STM as a time-averaged 6-fold pattern. The pattern suggests that the potential minima directions occur for the rotating molecule at the six hollow sites surrounding the atop adsorption site. The barrier for rotation, obtained by DFT calculations, is approximately 0.1 kcal.mol(-1). At low coverages, preferential adsorption occurs at defect sites in the surface, namely, the herringbone "elbows" and random atomic step sites. Molecules adsorbed on these sites do not exhibit rotational freedom.     

Au(111)表面Verdazyl自由基的构象转换

Pure organic radical molecules on metal surfaces are of great significance in exploration of the electron spin behavior. However, only a few of them are investigated in surface studies due to their poor thermal stability. The adsorption and conformational switching of two verdazyl radical molecules, namely, 1, 5-biisopropyl-3-(benzo[b]benzo[4,5]thieno[2, 3-d]thiophen-2-yl)-6-oxoverdazyl (B2P) and 1, 5-biisopropyl-3-(benzo[b]benzo[4,5]thieno[2, 3-d]thiophen-4-yl)-6-oxoverdazyl (B4P), are studied by scanning tunneling microscopy (STM) and density functional theory (DFT). The adsorbed B2P molecules on Au(111) form dimers, trimers and tetramers without any ordered assembly structure in which two distinct appearances of B2P in STM images are observed and assigned to be its "P" and "T" conformations. The "P" conformation molecules appear in the STM image with a large elliptical protrusion and two small ones of equal size, while the "T" ones appear with a large protrusion and two small ones of different size. Likewise, the B4P molecules on Au(111) form dimers at low coverage, strip structure at medium coverage and assembled structure at high coverage which also consists of above-mentioned two conformations. Both B2P molecules and B4P molecules are held together by weak intermolecular interaction rather than chemical bond. STM tip induced conformational switching of both verdayzl radicals is observed at the bias voltage of +2.0 V. The "T" conformation of B2P can be switched to the "P" while the "P" conformation of B4P can be switched to the "T" one. For both molecules, such a conformational switching is irreversible. The DFT calculations with Perdew-Burke-Ernzerhof version exchange-correlation functional are used to optimize the model structure and simulate the STM images. STM images of several possible molecular conformations with different isopropyl orientation and different tilt angle between verdazyl radical and Au(111) surface are simulated. For conformations with different isopropyl orientation, the STM simulated images are similar, while different tilt angles of verdazyl radical lead to significantly different STM simulated images. Combined STM experiments and DFT simulations reveal that the conformational switching originates from the change of tilting angle between the verdazyl radical and Au(111) surface. The tilt angles in "P" and "T" conformations are 0° and 50°, respectively. In this study, two different adsorption conformations of verdazyl radicals on the Au(111) surface are presented and their exact adsorption structures are identified. This study provides a possible way to study the relationship between the electron spin and configuration conversion of pure organic radical molecules and a reference for designing more conformational switchable radical molecules that can be employed as interesting molecular switches.     

Formation of ordered self-assembled monolayers by adsorption of octylthiocyanates on Au(111)

Self-assembled monolayers (SAMs) were formed by the spontaneous adsorption of octythiocyanate (OTC) on Au(111) using both solution and ambient-pressure vapor deposition methods at room temperature and 50 degrees C. The surface structures and adsorption characteristics of the OTC SAMs on Au(111) were characterized by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). The STM observation showed that OTC SAMs formed in solution at room temperature have unique surface structures including the formation of ordered and disordered domains, vacancy islands, and structural defects. Moreover, we revealed for the first time that the adsorption of OTC on Au(111) in solution at 50 degrees C led to the formation of SAMs containing small ordered domains, whereas the SAMs formed by vapor deposition at 50 degrees C had long-range ordered domains, which can be described as (radical3 x 2 radical19)R5 degrees structures. XPS measurements of the peaks in the S 2p and N 1s regions for the OTC SAMs showed that vapor deposition is the more effective method as compared to solution deposition for obtaining high-quality SAMs by adsorption of OTC on gold. The results obtained will be very useful in understanding the SAM formation of organic thiocyanates on gold surfaces.     

金属-有机配合物分子在Au(111)表面的吸附行为

用STM对含氧桥的金属-有机配合物[Cu₂(μ-O)(dptap)4(NO₃)₂]分子在Au(111)表面的吸附行为进行了研究. STM结果表明, 该分子同时存在非解离吸附和解离吸附, 大部分分子在Au(111)面形成有规则的排列, 少量分子发生解离吸附, 并形成(√3×√3)R30°Cu原子吸附结构. 探讨了两种吸附现象共存的起因.     

Adsorption of formaldehyde on Pt(111) and Pt(100) electrodes: cyclic voltammetry and scanning tunneling microscopy

The adsorption of formaldehyde (HCHO) on Pt(111) and Pt(100) electrodes was examined by cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM) in 0.1 M HClO(4). The extent of HCHO adsorption at both Pt electrodes was evaluated by comparing the CVs, particularly for the hydrogen adsorption and desorption between 0.05 and 0.4 V, obtained in 0.1 M HClO(4) with and without HCHO. The adsorption of HCHO on these Pt electrodes was significant only when [HCHO] >/= 10 mM. Adsorbed organic intermediate species acted as poisons, blocking Pt surfaces and causing delays in the oxidation of HCHO. Compared to Pt(111), Pt(100) was more prone to poisoning, as indicated by a 200 mV positive shift of the onset of HCHO oxidation. However, Pt(100) exhibited an activity 3 times higher than that of Pt(111), as indicated by the difference in peak current density of HCHO oxidation. Molecular resolution STM revealed highly ordered structures of Pt(111)-( radical7 x radical7)R19.1 degrees and Pt(100)-( radical2 x radical2) in the potential region between 0.1 and 0.3 V. Voltammetric measurements further showed that the organic poisons produced by HCHO adsorption behaved differently from the intentionally dosed CO admolecules, which supports the assumption for the formation of HCO or COH adspecies, rather than CO, as the poison. On both Pt electrodes, HCHO oxidation commenced preferentially at step sites at the onset potential of this reaction, but it occurred uniformly at the peak potentials.