CO2 anion-radical in organic carboxylations

This letter shows a first approximation to the use of CO₂ anion-radical in the obtention of α-methyl and α-ethylcyanoacetic acids from propionitrile and butyronitrile, respectively, through a paired electrochemical reaction with CO₂. The electrosynthesis of α-chloro-phenylacetic acid from benzyl chloride and phenylacetic acid from toluene by another proposed pathway is also discussed.     

Solubility of some pesticides in supercritical CO2

Summary The solubility limits of some pesticides (Linuron, Methoxychlor, Diclofopmethyl, Diclofop and 2,4-D) and of 3,4-dichloroaniline have been determined in supercritical CO₂ at 200 bar and 40° C, using the Milton Roy sample preparation accessory SPA^TM. Depending on the polarity and vapour pressure of the investigated compounds, the solubility was found to be between 0.3 and 12 gl^–1.

---

Löslichkeit einiger Pesticide in überkritischem CO₂

     

Hydrogenation of CO2

The hydrogenation of CO₂ has been studied on three different series of catalysts: Fe/MgO, Ni/Ti, Cr/Zn doped with potassium. Reaction was carried out in a conventional flow microreactor system at 15 bar at 250–350°C. Three independent competing reactions: Reverse gas-water shift (RGWS), Fischer-Tropsch (FT) and methanol synthesis were observed.

---

CO₂ : Fe/MgO, Ni/Ti, Cr/Zn . 15 250–350°C. : RGWS, F.T. .

     

The reaction of (SO2)2 and (CO2)2 with Ba

The reactions of (CO₂)₂ and (SO₂)₂ with Ba have been investigated using a crossed beam arrangement and the laser-induced fluorescence technique. Internal energy in the BaO product was probed in order to study differences between monomeric and dimeric reactions. The reaction cross section for the dimers of CO₂ was found to be between four and eightfold larger than that of the monomers. This can be explained by the change in the reaction mechanism due to the positive electron affinity of the dimers versus the negative electron affinity of the monomers. The product BaO from the dimeric reactions is much colder rotationally than in the monomeric case. This phenomenon can be explained based on the kinematics.     

CO2在纳米SiO2/TiO2悬浮体系中的光催化还原

用水热法合成了氧化硅改性的具有高比表面积、高催化活性的锐钛型二氧化钛, 并在其悬浮体系中将CO₂光催化还原合成甲醇. 采用XRD, TEM, 物理吸附, UV-Vis吸收光谱和FTIR等表征手段对催化剂结构特征进行了研究. 结果表明: 添加氧化硅后, 氧化硅和二氧化钛之间形成Si—O—Ti键, 抑制了TiO₂晶粒生长, 提高了锐钛型TiO₂的比表面积, 且随着含硅量的增加, SiO₂/TiO₂的UV吸收逐步蓝移, 禁带宽度增加. 还原反应结果表明: SiO₂/TiO₂具有光催化还原活性, 且随着含硅量的增加先增加后减小, 当SiO₂质量分数为3.5%时, SiO₂/TiO₂复合催化剂反应活性最强, 5 h内甲醇产量可达到21.0 mg/L, 并有少量甲醛生成.     

PLASMA POLYMERIZATION OF ACETYLENE/CO_2/H_2

A study has been made on the plasma polymerization of acetylene/CO_2/H_2 in a capacitively coupled RF plasma. The monomer mixture yielded a crosslinked film with light brown color. A kinetic study is reported for the plasma polymer ization of acetylene/CO_2/H_2. The effects of discharge power level and reactor geometry on the rate of polymer formation are reported. The structure of the plasma polymer is investigated by IR study.     

TiO_2纳米带光催化二氧化碳甲烷化

研究了在常温常压下TiO2纳米带光催化CO2催化加氢气反应。在紫外光照射下,二氧化碳的加氢还原产物为甲烷。利用高分辨TEM,XRD,UV-Vis DRS,低温氮吸附-脱附,TG等考察了催化剂与甲烷产率的构效关系。结果表明,在600℃焙烧时得到的双晶材料具有最佳的光催化活性。优异的光催化活性主要得益于TiO2双晶脱水纳米带(DNR Bicrystalline dehydratednanoribbon)。上面形成的纳米晶界能够提高催化剂在紫外区的光吸收能力,TiO2(B)和锐钛矿独特的双晶间隔结构也提高了界面电荷分离的效率。担载贵金属Pt显著地提高了反应速率。     

CO2的光电催化还原

CO2为温室气体的主要成分,同时也是潜在的碳能源。本文主要介绍了近年来利用光催化、电催化以及光电催化3种不同催化方法还原CO2的研究现状。文章综述了催化剂材料和催化反应体系对CO2还原效果的影响。从催化效率,光、电转化效率,选择性和能耗等不同角度进行了比较和评价。细致地讨论分析了各种催化还原方法的反应机理,并对催化还原CO2研究的发展方向和应用前景进行了展望。     

Hydrocondensation of CO2: Reaction of CO2(CO)/H2 on CuO/ZnO contact masses

The hydrocondensation of CO₂ and CO with and without added MeOH, HCHO and (CH₃)₂CHOH has been studied on CuO/ZnO contact masses in a static reactor at different pressures and reaction times.

---

CO₂ CO MeOH, HCHO (CH₃)₂CHOH CuO/ZnO .

     

Cu-ZnO-CeO2催化剂组成对CO2加H2合成甲醇性能的影响

采用并流沉淀法分别制备了CuO-CeO₂（物质的量比为5：1）、CuO-ZnO（物质的量比为5：4）、CuO-ZnO-CeO₂（物质的量比为5：4：1）三组目标催化剂,通过X射线衍射（XRD）、氢气升温还原（H₂-TPR）、CO₂程序升温脱附（CO₂-TPD）、氮气吸附-脱附、X射线光电子能谱（XPS）、N₂O滴定表征技术对催化剂的物化性能进行了测试,并在高温高压微催化反应器中对催化剂进行活性评价。研究了CuO-ZnO-CeO₂组成对CO₂加氢合成甲醇的影响。结果表明,与二组分催化剂相比较,三组分CuO-ZnO-CeO₂催化剂物化性能及催化活性发生了很大变化,催化剂表面碱性位增强,热稳定性增强,CuO颗粒粒径变小,铜分散度以及氧空位浓度提高,最终催化活性显著提高。其中,CuO-ZnO-CeO₂催化剂中,CuO颗粒粒径为8.2nm,铜的比表面积为68.4m²/g,铜分散度为7.19%,甲醇的选择性和收率分别为48.6%和0.057mmol/（g·min）,催化剂活性较好。     

Metastable anions of CO2

Long-lived metastable negative ions of CO₂ have been observed in the gas phase as direct products of electron and cesium collisions with organic molecules which contain “bent” CO₂ as a basic unit. The long autodetachment life-times are attributed to two related factors - first, the potential energy curve of CO⁻₂(²A₁) lies below that of CO₂(¹A₁) at 134°, and, second, an unfavorable Franck-Condon overlap exists between the bent ion (134°) and the linear neutral parent.     

Intermolecular forces for D2, N2, O2, F2 and CO2

The intermolecular potentials for D₂, N₂, O₂, F₂ and CO₂ are determined on the basis of the second virial coeffincients, the polarizabilities parallel and perpendicular to the molecular axes, and the electric quadrupole moment. The repulsive parts of the potentials are taken from the corresponding Kihara core-potentials. Effects of the octopolar induction are taken into consideration in a unique way. The potential depends on relative orientations of the two molecules as well as the distance r between the molecular centers. This dependence is shown in graphs. A measure of the anisotropy of the potential depth is 0.72 for CO₂ 0.36 for D₂, and smaller than 0.27 for N₂ O₂ and F₂. The remarkable anisotropy for CO₂ and D₂ is due to strong electrostatic quadrupole interactions.     

Vibrational relaxation of CO2(0001) in pure CO2

The rate constant for collisional deactivation of CO₂(00⁰1) in pure CO₂ has been measured at room temperature using the laser fluorescence technique. The relaxation rate has been found to be (1.0 ± 0.2) × 10^?14 cm³ s^?1 which is in favorable agreement with previously published values.     

Preparation of silane-coated TiO2 nanoparticles in supercritical CO2

Nanometric inorganic pigments are widely used as fillers for hybrid composite materials. However, these nanometric powders are hydrophilic in nature and their surface must be functionalized before use. In this work, titanium dioxide (TiO₂) nanoparticles were coated using silane coupling agents with alkyl functionality. A supercritical carbon dioxide (scCO₂) method was used for surface silanization. Five alkylalkoxysilanes with different alkyl chain length and structure were studied: methyltrimethoxy, isobutyltriethoxy, octyltriethoxy, octyldimethylmethoxy and octadecyltrimethoxysilane. The microstructure and thermal stability of deposited monolayers were characterized using thermogravimetric analysis, ATR–IR spectroscopy, transmission electron microscopy, wettability characterization and low-temperature N₂ adsorption/desorption analysis. The use of scCO₂ as a solvent provided an effective approach to functionalize individual inorganic nanoparticles due to the enhanced diffusivity of the solution molecules in the aggregates interparticle voids. The trifunctional silanes employed here yielded surfaces with better thermal stabilities and greater hydrophobicities than the used monofunctional silane.     

Effect of CO2 on O2 photo-adsorption on anatase

The presence of CO₂ on TiO₂ affects the process of oxygen photo-adsorption depending on the hydroxylation state of the surface. In dehydroxylated samples CO₂ blocks the formation of O ₃ ^– and O ₂ ^– . On H₂O₂/TiO₂ samples pretreated in the range of 150–200°C it leads to CO₂–O ₂ ^– species.

---

, Cu(II). . .

     

Ru／ZrO2作用下的二氧化碳甲烷化催化反应机理

二氧化碳是地球上储量最大的碳源之一。随着石油资源的日益枯竭,加之向大气中大量排放二氧化碳所引起的严重的生态环境等问题,二氧化碳的转化和应用研究日见活跃,其中二氧化碳的催化加氢甲烷化由于具有明确的应用前景而倍受关注,对其催化反应机理的研究也逐渐展开［1］。在早期工作中,研究者一般认为二氧化碳并未在催化剂表面吸附,而是经气相还原生成一氧化碳,然后再进一步加氢而得到甲烷,这些看法因缺少直接证据并与实验事实相悖而缺乏说服力［2］。     

Collision-induced absorption of infrared radiation by N2, O2 and CO2

The collision-induced absorption of the symmetric vibration of CO₂ has been observed in the pure gas at densities from 20.0 to 40.0 amagat and at temperatures of 273, 298, and 323 K using infrared techniques. From the integrated intensities of the bands and using the (exp ?4) model of van Kranendonk, it is possible to deduce a value for the first derivative of the quadrupole moment with respect to the vibrational coordinate. For CO₂ the contribution from quadrupole distortion to the binary absorption coefficient is reported for several temperatures. The (exp ?4) model of van Kranendonk is used to calculate the binary absorption coefficients for the fundamental vibrational bands of N₂ and O₂ at temperatures from 70 to 340 K. The parameters λ and p/σ describing the magnitude and range of the short-range collision-induced dipole moments were determined using the known experimental absorption coefficients. The contributions from atomic distortion and quadrupole distortion to the binary absorption coefficient are calculated for N₂ and O₂.     

CO/H2 and CO2/H2 reactions with amorphous carbon-metal catalysts

By metal impregnation of selected naturally occurring organic materials followed by controlled carbonization, metal semicoke catalysts can be readily prepared. These catalysts have been tested in the synthesis of hydrocarbons and alcohols from CO/H₂ and CO₂/H₂ mixtures. Fe and Co preparations have been used. Relatively high temperatures are required when using these catalysts, which are quite active for synthesis using CO₂ and H₂. The pressure (5150 kPa) is very favorable both for the synthesis of liquid hydrocarbons (C₅–C₃₀) and alcohols (C₁–C₅).

---

. CO/H₂ CO₂/H₂. Fe Co. , CO₂ H₂. 5150 ) (C₅–C₃₀) (C₁–C₅).

     

SnO2—SiO2负载Cu,Ni催化剂的CO2加氢反应性能

采用表面反应改性法制备了SnO2-SiO2(SnSIO)表面复合物载体,用等体积浸渍法制备了SnSiO担载的Cu-Ni双金属催化剂,借助BFT,XRD,TPR,IR和微反等技术研究了SnSiO及其负载的Ni,Cu双金属催化剂的表面构造,化学吸附及CO2加氢反应性能,结果表明：SnSiO是SnO2单分子层价联于SiO2表面的复合氧化物,仍保持类似SiO2载体的孔结构和比表面;SnO2引入SiO2表面后可以有效地促进CuO,NiO的还原,还原后成为负载在SnSiO载体表面的Cu-Ni合金,CO2在负载型Cu-Ni合金表面Cu或表面Ni位 发生化学吸附,形成线式和剪式吸附;CO2在催化剂上的加氢反应产物主要是CH3OH,CH4,CO和H2O,生成CH3OH的选择性与催化剂组成及反应条件密切相关,Cu-Ni催化剂,在0．5MPa,170度,H2。CO2（mol/mol)为3 的条件下,CH3OH的选择性达到84．6％。