具有Weibull生存死亡特征的冷链品库存补货定价策略研究

建立了无限期内冷链品具有Weibull生存死亡特征、随机需求且受售价影响的库存补货定价模型,其中售价是连续变化的,需求率是售价的指数函数,变质率服从的三参数Weibull分布,提前期固定。系统以利润最大化为目标函数,在(r,Q)库存策略下,建立库存模型,采用直接法,对模型近似求解,得到最优补货定价策略。利用Matlab进行算例模拟和灵敏度分析发现:补货提前期和单位仓储成本对补货定价策略影响较大,二者增大会导致系统利润降低;单位处理成本的增加,在一定程度上使得系统降低最优补货量,使系统利润增加;保鲜期固定的前提下,受冷链品的流动环境因子和存储环境因子影响的变质率对补货定价策略影响较大,它的增大会使系统利润降低。这些发现能够帮助优化系统模型,对现实问题具有一定的指导意义。     

回收率依赖价格的再制造EPQ模型研究

研究了考虑回收率依赖于回收品价格,并带有废弃处理的制造和再制造混合系统的(1,R)和(M,1)EPQ模型.在模型中,采用新产品的制造和回收产品的再制造两种方式来满足客户的需要,回收产品部分用于再制造,其余作为废弃处理;总平均成本包括与回收产品、可销售产品有关的库存持有成本,与制造和再制造有关的生产成本和固定成本,与回收品及制造所需原材料的采购成本以及废弃处理成本.模型给出最优生产策略及总平均成本的表达式.算例验证了所建模型的计算方法,并分析了新引人决策变量p(回收产品单价占制造新产品所需原料价格的比例对总平均成本的变化率的影响.     

一种改进企业在框架协议下库存管理的方法

企业为了货源的稳定而与供应商签订一定期限内的订购框架协议,但如何实施订购策略以保障协议量的完成,保证满足需求的同时最小化企业的库存成本成为企业必须考虑的一个问题.传统的企业库存管理方法如(r,Q)、(s,S)等订购策略在一定程度上只考虑了如何满足需求,避免缺货,而没有考虑供应商的供货能力,在协议期内的总订购量只考虑了需求的影响,因而不能保证框架协议的完成.本文在(s,S)策略的基础上,考虑了框架协议的约束,提出了一种既能够保障框架协议的完成,又能够最大限度满足需求,同时降低企业库存成本的方法一“双表作业法”,并验证了方法的有效性.     

需求依赖于服务水平的易变质品库存策略研究

本文研究需求依赖于上一周期服务水平、缺货时订单部分损失的两周期易变质品库存问题。分别考虑一次订货和多次订货两种情况,以平均利润最大化为目标构建库存模型,证明了模型解的存在性和唯一性,得到了最优库存服务水平和最优补货策略。最后,通过算例给出两个模型的应用,对重要参数进行了灵敏度分析,并且将两种模型的结果进行了对比分析。结果表明:订单损失率的增加会提高服务水平,但会使得利润降低;顾客期望服务水平的提高会降低第一阶段的服务水平,同时使利润减少;单位库存持有成本或变质率的增加会降低服务水平和平均利润。通常情况,企业通过多次订货能获得更大的利润,而只有当库存持有成本极小时,一次订购才能够获得更大的利润。同时,结果也表明:服务水平对库存策略有较大的影响,因此在进行库存决策时考虑服务水平具有重要的作用。     

VMI条件下具有复合二项随机需求的销售商库存策略研究

考虑一个典型的单一产品的二级供应链系统:单供应商对单销售商,假定系统中销售商的需求分布为复合二项分布,未满足的需求机会损失;补货间隔时间为一随机变量.本文采用概率方法对销售商的需求分布、期望缺货、期望库存周期及库存的稳定性分布进行研究的基础上,构建了使单位时间内销售商的期望库存成本费用最小的库存模型,由此模型便可确定VMI模式下供应商对销售商的库存补货参数s和S,并且给出了在补货响应时间为泊松分布的情况下模型的求解算法,还给出了及时补货响应情况下的5个算例.为补货策略的实施提供了一种简单易于控制的思路和方法.     

一类跳扩散需求存贮系统(s,S)库存控制策略研究

考虑的是连续检查库存,需求为一个常时间函数和-个复合Poison跳扩散随机过程的和的存贮系统最优库存控制问题.基于期望折扣成本最小建立了无穷时间区间具有固定订购成本的最优库存模型,确定可采用(s,S)策略进行库存控制,给出了最优(s,S)策略的充要条件--HJB方程Ⅰ、Ⅱ.我们采用"猜测"的方法确定了最优(s,S)策略对应的值函数形式,建立了确定库存参数的最优化模型.     

快速补货模式下的动态定价与库存联合策略

在供应有限的情况下,研究常规补货和快速补货下商品动态定价问题.首先,建立了动态规划模型,理论证明了最优库存策略是基于(s,S)策略下改进的基本库存策略.其次,提出了一种启发式策略求复杂系统的最优策略,启发式算法能够求出最优价格和最优库存水平.最后,数值算例研究表明,库存管理中采用快速补货提高了零售商的利润;初始库存水平越高零售商的利润越高.     

具有两类需求服务的随机库存系统控制策略研究

研究具有两类顾客排队需求服务的随机库存系统.系统采取(s,Q)补货策略且当库存水平下降到安全库存s时,到达的第二类顾客以概率P得到服务.首先,建立库存水平状态转移方程并通过递推算法求解获得库存水平稳态概率分布和系统稳态指标;接下来,构建库存成本函数;最后,采用数值试验的方法研究该库存系统的最优控制策略并考察系统参数的敏感性.     

基于ERP的(s,S)策略下库存优化控制决策支持系统

针对当前ERP软件系统无法动态地给出优化订购策略并对历史数据进行有效的分析等不足,以最小化库存费用为目标建立起折扣准则下库存优化数学模型,对ERP软件中导出的各类历史数据进行模型化分析,动态地得出各类产品(s,S)结构形式的优化订购策略.基于该模型设计并开发了库存优化控制决策支持系统,为用户提供决策支持,很大程度降低了企业库存费用.     

回收率依赖回收产品质量的再制造EOQ模型

研究回收率依赖回收产品质量情况下制造/再制造混合系统的EOQ模型.该模型假设顾客的需求可通过新产品的制造和回收产品的再制造两种方式满足,且这两种产品无质量差异;需求率是确定的、连续的;总成本包括制造和再制造的固定启动成本,可销售产品和回收品的库存成本,以及缺货成本.当假设缺货成本无限大时给出不允许缺货情况下的模型.给出算例验证模型的有效性.     

需求率依赖于库存水平的离散性库存费的库存模型

传统的库存控制模型都视需求率为固定不变的,放松了这个假定,通过考虑库存费为存储时间的阶梯函数的情形:(1)全单位库存费用,(2)增量库存费用,并且在需求率依赖于库存水平,当库存水平下降到一定程度时,需求率变为常数的形式下,把变化的订购费引入,发展了两个离散性库存费的变质物品的库存控制模型。在模型中允许周期末库存水平不为零,并且提出了最优解的算法。     

需求率基于库存的变质物品的两货栈模型

针对需求受库存水平影响的变质品的两货栈系统,本文首先考虑了允许缺货但缺货要补情形下,分别给出了L₁系统(库存系统只用自己的货栈存放物品)和L₂系统(库存系统使用自己货栈和租用货栈存放物品)时,销售商的库存和运输策略模型。其次给出了允许缺货但缺货不补L₁系统和L₂系统时,销售商的库存和运输策略,并对模型最优解作了相关分析,最后给出算例,给销售商实际的库存管理提供了理论依据。     

A production–inventory model in an imperfect production process

The paper develops a model to determine the optimal product reliability and production rate that achieves the biggest total integrated profit for an imperfect manufacturing process. The basic assumption of the classical Economic Manufacturing Quantity (EMQ) model is that all manufacturing items are of perfect quality. The assumption is not true in practice. Most of the production system produces perfect and imperfect quality items. In some cases the imperfect quality (non conforming) items are reworked at a cost to restore its quality to the original one. Rework cost may be reduced by improvements in product reliability (i.e., decreasing in product reliability parameter). Lower value of product reliability parameter results in increase development cost of production and also smaller quantity of nonconforming products. The unit production cost is a function of product reliability parameter and production rate. As a result, higher development cost increases unit production cost. The problem of optimal planning work and rework processes belongs to the broad field of production–inventory model which deals with all kinds of reuse processes in supply chains. These processes aim to recover defective product items in such a way that they meet the quality level of ‘good item’. The benefits from imperfect quality items are: regaining the material and value added on defective items and improving the environment protection. In this point of view, a model is introduced here to guide a firm/industry in addressing variable product reliability factor, variable unit production cost and dynamic production rate for time-varying demand. The paper provides an optimal control formulation of the problem and develops necessary and sufficient conditions for optimality of the dynamic variables. In this purpose, the Euler–Lagrange method is used to obtain optimal solutions for product reliability parameter and dynamic production rate. Finally, numerical examples are given to illustrate the proposed model.     

Random fuzzy EOQ model with imperfect quality items

This paper investigates an economic order quantity (EOQ) problem with imperfect quality items, where the percentage of imperfect quality items in each lot is characterized as a random fuzzy variable while the setup cost per lot, the holding cost of each unit item per day, and the inspection cost of each unit item are characterized as fuzzy variables, respectively. In order to maximize the expected long-run average profit, a random fuzzy EOQ model is constructed. Since it is almost impossible to find an analytic method to solve the proposed model, a particle swarm optimization (PSO) algorithm based on the random fuzzy simulation is designed. Finally, the effectiveness of the designed algorithm is illustrated by a numerical example.     

具有Min(N,D,V)-策略控制的M/G/1排队系统

研究服务员具有多重休假和系统采取Min(N,D,V)-策略控制的M/G/1排队系统,运用全概率分解技术和拉普拉斯变换工具,研究了系统队长的瞬态分布和稳态分布,得到了队长瞬态分布的拉普拉斯变换的表达式和稳态队长分布的递推表达式,同时给出了稳态队长的随机分解结果和附加队长分布的显示表达式.进一步讨论了当N→∞,或D→∞,或p{V=∞}=1,或p{V=0}=1的一些特殊情况.最后,在建立系统费用结构模型的基础上,导出了系统长期单位时间的期望费用的显示表达式,并通过数值实例不但确定了使得系统在长期单位时间内的期望费用最小的联合控制策略(N~*,D~*),而且与单一的最优N~*-控制策略和D~*-控制策略进行了比较.     

An EOQ model with process reliability considerations

The classical economic order quantity (EOQ) model assumes that items produced are of perfect quality and that the unit cost of production is independent of demand. However, in realistic situations, product quality is never perfect, but is directly affected by the reliability of the production process. In this paper, we consider an EOQ model with imperfect production process and the unit production cost is directly related to process reliability and inversely related to the demand rate. In addition, a numerical example is given to illustrate the developed model. Sensitivity analysis is also performed and discussed.     

A Lot-sizing Model for Just-in-time Manufacturing

We consider the problem of determining lot sizes of multiple items that are manufactured by a single capacitated facility. The manufacturing facility may represent a bottleneck processing activity on the shop floor or a storeroom that provides components to the shop floor. Items flow from the facility to a downstream facility, where they are assembled according to a specified mix. Just-in-time (JIT) manufacturing requires a balanced flow of items, in the proper mix, between successive facilities. Our model determines lot sizes of the various items based on available capacity and four attributes of each item: demand rate, holding cost, set-up time and processing time. Holding costs for each item accrue until the appropriate mix of items is available for shipment downstream. We develop a lot-sizing heuristic that minimizes total holding cost per time unit over all items, subject to capacity availability and the required mix of items.     

能源回购补偿机制下基于无限阶段折扣准则的最优生产与库存策略

世界经济的快速发展和工业化进程的推进促使各国电力需求激增,电力供需矛盾为能源回购项目的发展提供了条件。为能够实现错峰用电和缓解能源需求的紧张,能源回购项目在每个阶段出现能源短缺时,将根据短缺的不同程度为限产(或停产)企业提供了金额不同的资金补偿。因此,在该能源回购补偿机制下,企业需要确定每个阶段是否参加能源回购项目及其相应的生产库存策略,来实现其期望折扣成本的最小化。本文研究了能源回购补偿机制下企业以最小化期望折扣成本为目标的无限阶段最优生产/库存策略。引入启动成本和多个能源需求状态的资金补偿水平后,在合理的假设条件下,证明了每个阶段生产商的最优生产/库存策略在高峰状态为(sⁱ,S)策略,在非高峰状态为(s⁰,S,A)策略。     

Synthetic realization approach to fuzzy global optimization via gamma algorithm

A new approach is proposed for global optimization problems with fuzzy cost functions and fuzzy box and equality constraints. It allows one to avoid complex operations with fuzzy sets and the use of various subjective indices of choice. To resolve the contradiction between economically better solutions with low possibility of realization and a little poorer solution with higher possibility of realization, the synthetic realization is defined as certain fixed -level cut for all membership functions. Consideration of such realizations guarantees a level of credibility not less than given (0, 1] for all globally optimal solutions. Then, so defined -cuts are rectified to cut off realizations with possibility less than and to retain higher possibility realizations which are assigned credibility μ = 1 for the whole interval of possible realizations. This construction results in a set-valued band of credibility not less than for a given fuzzy cost function f̃(x) which band has crisp Lipschitz continuous lower- and upper-value functions f_*(x), f*(x) such that f_*(x) ≤ f̃(x) ≤ f*(x) for all x X̃ Rⁿ. Then, the gamma algorithm is applied to obtain the interval global optimal solution f̄₀(x) = [f⁰_*(x), f*₀(x)]. To further simplify the computations, the fuzziness in the feasible set X̃ is transferred to the function value space transforming X̃ into the crisp unit cube in Rⁿ₊ common for all fuzzy optimization problems in Rⁿ with box and equality constraints.