Preparation of end-grafted polymer brushes by nitroxide-mediated free radical polymerization of vaporized vinyl monomers

In this work, we report a gas-phase polymerization approach to create end-grafted vinyl based polymer films on silicon oxide based substrates. The "surface-initiated vapor deposition polymerization" (SI-VDP) of vaporized vinyl monomers, via the nitroxide-mediated free radical polymerization mechanism, was developed to fabricate various homo- and block copolymer brushes from surface-bound initiators, 1-(4'-oxa-2'-phenyl-12'-trimethoxysilyldodecyloxy)-2,2,6,6-tetra-methylpiperidine ("TEMPO"). The resulting polymer thin films were characterized by the Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, ellipsometry, and contact angle goniometry, respectively, to identify the surface composition, film thickness, surface coverage, and water contact angles. Through the SI-VDP, end-grafted polymer films of polystyrene (PSt), poly(acrylic acid) (PAAc), poly(N-(2-hydroxypropyl) methacrylamide) (PHPMA), and poly(N-isopropylacrylamide) (PNIPAAm) with 10-200 nm thicknesses were fabricated. Furthermore, the block copolymer films of PAAc (1st block)-b-PSt (2nd block), PSt (1st block)-b-PAAc (2nd block), and a triblock copolymer film of PAAc (1st)-b-PSt (2nd)-b-PHPMA (3rd), were also fabricated, suggesting the "renewability" of the TEMPO-initiated polymerization in the SI-VDP scheme. It is also noticed that the SI-VDP is more efficient than the conventional solution phase polymerization in producing functional polymer brushes such as PNIPAAm, PAAc, or PAAc-b-PSt end-grafted films. In summary, our studies have shown clear advantages of the SI-VDP setup for the nitroxide-mediated polymerization scheme in controlling synthesis of end-grafted homo- and copolymer thin films.     

Synthesis of monodisperse zinc sulfide particles grafted with concentrated polystyrene brush by surface-initiated nitroxide-mediated polymerization

Monodisperse zinc sulfide (ZnS) particles of diameters ranging from 120 to 400 nm were prepared and then coated with a thin layer of silica (SiO₂). After the surface modification with an alkoxyamine derivative, polystyrene (PS) brushes of chain lengths ranging from 30,000 to 114,000 in M_n with relatively low polydispersities less than 1.5 in M_w/M_n were successfully grafted by surface-initiated nitroxide-mediated polymerization, where the M_n and M_w are the number- and weight-averaged molecular weights, respectively. The graft density reached a value as high as 0.9 chains nm⁻². These core-shell hybrid particles (ZnS@SiO₂-PS) were highly dispersible, without any aggregation, in various solvents good for PS, also forming a monolayer at the air-water interface by spreading its solution. The transmission electron microscopic observation of the monolayers deposited on a solid support revealed two-dimensionally close-packed arrays of particles. These monolayers exhibited a beautiful structural color dependent on the angle of incident light because of such an ordered array of the ZnS cores with a high refractive index. Hollow spheres constituted of a SiO₂ shell with well-defined, high-density PS brushes were first synthesized by selective dissolution of the ZnS core from the ZnS@SiO₂-PS hybrid particle.     

Graft copolymerization of methyl methacrylate on polystyrene backbone through nitroxide-mediated photo-living radical polymerization

Polystyrene-graft-poly(methyl methacrylate) (PSt-graft-PMMA) was prepared by the nitroxide-mediated photo-living radical polymerization using poly(4-vinylbenzyl-4-oxy-2,2,6,6-tetramethylpiperidine-1-oxyl-ran-styrene) (P(VTEMPO-r-St)) as the macromediator. The bulk polymerization of methyl methacrylate was performed at room temperature by irradiation using a high-pressure mercury lamp with P(VTEMPO-r-St) as the mediator having the molar ratio of VTEMPO/St unit = 0.40/0.60 and the molecular weight of Mn = 21,700 and the (2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) as the initiator in the presence of the (4-tert-butylphenyl)diphenylsulfonium triflate as the photo-acid generator. The polymerization proceeded via a controlled polymerization mechanism because both the first-order time-conversion plots and the conversion-molecular weight plots showed linear increases. It was found that all the VTEMPO units supported the controlled PMMA chains by ¹H NMR analysis because the molar ratio of the VTEMPO at the terminal chain end to the 1-cyano-3-methoxy-1,3-dimethylbutyl group at the initiation chain end of the PMMA was unity.     

Polymer brushes on single-walled carbon nanotubes by atom transfer radical polymerization of n-butyl methacrylate

Polymer brushes with single-walled carbon nanotubes (SWNT) as backbones were synthesized by grafting n-butyl methacrylate (nBMA) from the ends and sidewalls of SWNT via atom transfer radical polymerization (ATRP). Carboxylic acid groups on SWNT were formed by nitric acid oxidation. The ATRP initiators were covalently attached to the SWNT by esterification of 2-hydroxyethyl 2'-bromopropionate with carboxylic acid groups. Methyl 2-bromopropionate (MBP) was added as free initiator during the brush preparation to control growth of the brushes and to monitor the polymerization kinetics. Size-exclusion chromatography (SEC) results show that the molecular weight of free poly(n-butyl methacrylate) (PnBMA) increased linearly with nBMA monomer conversion. PnBMA cleaved from the SWNT after high conversion had the same molecular weight as PnBMA produced in solution. Thermogravimetric analyses (TGA) show that the amount of PnBMA grown from the SWNT increased linearly with the molecular weight of the free PnBMA. The most highly PnBMA-functionalized SWNT dissolve in 1,2-dichlorobenzene, chloroform, and tetrahydrofuran, and solubility increases with the amount of PnBMA bound to SWNT. Near-infrared and Raman spectra indicate that the side walls of the SWNT were lightly functionalized by the nitric acid treatment and that the degree of functionalization of the SWNT did not change significantly during the formation of initiator or during the polymerization. Atomic force microscopy (AFM) images show contour lengths of the SWNT brushes on a mica surface from 200 nm to 2.0 microm and an average height of the backbone of 2-3 nm, indicating that the bundles of original SWNT were broken into individual tubes by functionalization and polymerization.     

Microwave-assisted nitroxide-mediated radical polymerization of styrene

The first single-mode microwave-assisted nitroxide-mediated radical polymerizations (NMRP) of styrene in bulk were successfully performed. The results showed that the polymerization proceeded in a controlled way. The power of microwave irradiation has considerable effect on the polymerization rate. The polymerization rates under appropriate power of microwave irradiation were faster than that under conventional heating (CH) at the same polymerization temperature. The living nature of the polymer was proved by successful chain extension polymerization and ¹H NMR spectrum analysis.     

Synthesis of copolymer brushes endowed with adhesion to stainless steel surfaces and antibacterial properties by controlled nitroxide-mediated radical polymerization

Novel copolymer brushes have been synthesized by a two-step "grafting from" method that consists of the electrografting of poly(2-phenyl-2-(2,2,6,6-tetramethyl-piperidin-1-yloxy)-ethylacrylate) onto stainless steel, followed by the nitroxide-mediated radical polymerization of 2-(dimethylamino ethyl)acrylate and styrene or n-butyl acrylate, initiated from the electrografted polyacrylate chains. The grafted copolymers were quaternized in order to endow them with antibacterial properties. Peeling tests have confirmed the strong adhesion of the grafted copolymer onto the stainless steel substrate. Quartz crystal microbalance experiments have proven that fibrinogen adhesion is lower on the hydrophilic quaternized films compared to the nonionic counterpart. Such quaternized copolymers exhibit significant antibacterial activity against the Gram-positive bacteria S. aureus and the Gram-negative bacteria E. coli.     

Polymer brushes on multiwalled carbon nanotubes by activators regenerated by electron transfer for atom transfer radical polymerization

The synthesis and characterization of multiwalled carbon nanotube (MWCNT) polymer brushes produced by activators regenerated by electron transfer (ARGET) in atom‐transfer radical polymerization (ATRP) was discussed. The polymer brushes were synthesized by esterification of the MWCNT carboxylic acid groups with hydroxyethyl‐2‐bromoisobutyrate and subsequently used in ARGET ATRP. This created a well defined living polymer brush carbon nanotube of comparatively low polydispersity and a polymer layer 10 nm thick. As, ARGET ATRP uses only minute concentrations of copper (II) catalyst, and is less sensitive to air compared to other living polymerization techniques, this process is a more industry‐compatible route for the commercialization of such materials. The structural and chemical properties were explored by a range of techniques including high resolution transmission electron microscopy, gel permeation chromatography, elemental analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. In addition, the polymer brush nanotubes were explored for their potential use in films and as fillers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

通过原子转移自由基聚合合成可光交联的聚苯乙烯接枝共聚物

聚苯乙烯(PS)在氯化锌(ZnCl_2)做催化剂下,通过氯甲基甲基醚氯甲基化反应,合成了氯甲基化聚苯乙烯(CMPS).在氯化亚铜/联二吡啶(CuCl/bpy)催化下,以CMPS为大分子引发剂引发甲基丙烯酸甲酯(MMA)、甲基丙烯酸酯化查尔酮(MSPK)进行原子转移自由基聚合,成功合成了侧链含有查尔酮结构的光敏聚苯乙烯接枝共聚物(PSMM),所得聚合物结构经过红外光谱(FT-IR)、核磁共振氢谱(~1H NMR)得到确认,通过热重分析(TG)、示差扫描量热法(DSC)测试了该聚合物的热学性能.结果表明,该接枝共聚物具有较好的热学性能及良好的光敏性.     

One-step synthesis of alkoxyamines for nitroxide-mediated radical polymerization

An alkoxyamine that is an effective initiator for the controlled polymerization of styrene and isoprene has been prepared by the reaction of 2-methyl-2-nitrosopropane with two equivalents of radicals derived from 1-bromoethylbenzene.     

Generation of core/shell iron oxide magnetic nanoparticles with polystyrene brushes by atom transfer radical polymerization

The functionalization of nanoparticle surfaces is required to improve the dispersion of an inorganic material inside an organic matrix. In this work, polystyrene (PS) brushes were grown on the surface of iron oxide magnetic nanoparticles with atom transfer radical polymerization and a grafting‐from approach. After polymerization, the magnetic nanoparticles had a graft density of 0.9 PS chains/nm². A sacrificial initiator was used to obtain a satisfactory result for the control of the polymerization, as its addition had to generate a sufficient concentration of persistent radicals (deactivator). A variety of techniques, such as Fourier transform infrared spectroscopy, thermogravimetric analysis, gel permeation chromatography, water contact‐angle measurements, and atomic force microscopy, were used to characterize the nanoparticles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4744–4750, 2007     

Synthesis of polymer grafted carbon nanotubes by nitroxide mediated radical polymerization in the presence of spin-labeled carbon nanotubes

Multiwalled carbon nanotubes (MWCNT) were grafted with polystyrene by in situ nitroxide mediated radical polymerization in the presence of TEMPO (2,2,6,6-tetramethylpiperidinyl-1-oxyl) functionalized MWCNT, which was synthesized by the reaction between 4-hydroxyl-TEMPO (HO-TEMPO) and carbonyl chloride groups on the MWCNT. Although the controllability of the polymerization was not high, highly soluble grafted MWCNTs were indeed obtained, indicating that the graft polymerization was efficient. The resulting polystyrene grafted MWCNTs were easily defunctionalized at room temperature using 3-chloroperoxybenzioc acid. TEM, SEM, and TGA were employed to determine the structure, morphology, and the grafting quantities of the resulting products.     

Patterning nanocluster polystyrene brushes grafted from initiator cores on silicon surfaces by lithography processing

In this study, we formed grafted polystyrene (PS) brushes possessing nanocluster structures through atom transfer radical polymerization from initiator cores presented on Si surfaces that had been generated using reactive ion etching (RIE). We established the surface grafting polymerization kinetics of the nanoclustered PS chains on the Si surfaces to fit their experimentally determined thickness (ellipsometry) and number-average molecular weight (M _n) of “free” PS (gel permeation chromatography). The propagation rate (k _p) and active grafting species deactivation rate (k _d) were obtained from reactions involving styrene concentrations from 0.2 to 2 M. We also used scanning electron microscopy to observe the morphologies of the PS grafted to the surfaces after various reaction times at various styrene concentrations. The PS brushes grafted onto the Si surfaces under styrene concentrations of 0.2, 0.5, 1, and 2 M exhibited clustered structures having cluster diameters of 12, 28, 42, and 45 nm, respectively; from these observations, we calculated the critical grafting density. In addition, we generated highly dense, well-defined patterns of PS on patterned Si(100) surfaces through the use of a very-large-scale integration process involving electron beam lithography and RIE. We employed the RIE system to generate a high density of reactive species at the bottom of the trenches for graft polymerization. After 21 h of grafting, AFM imaging revealed dense line patterns of nanoclustered PS.     

Effect of azoinitiators on nitroxide-mediated photo-living radical polymerization of methyl methacrylate

In order to clarify the initiator factor dominating the molecular weight distribution of the resulting polymer, the nitroxide-mediated photo-living radical polymerization of methyl methacrylate was performed using eight different kinds of azoinitiators: i.e., 2,2′-azobisisobutyronitrile, 2,2′-azobis(2-methylbutyronitrile), 2,2′-azobis(2,4-dimethylvaleronitrile), 1,1′-azobis(cyclohexane-1-carbonitrile), racemic-(2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile), meso-(2RS,2′SR)-azobis(4-methoxy-2,4-dimethylvaleronitrile), dimethyl 2,2′-azobis(2-methylpropionate), and 2,2′-azobis(N-butyl-2-methylpropionamide). The bulk polymerization was carried out at room temperature for 3 h using 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl (MTEMPO) as the mediator in the presence of bis(alkylphenyl)iodonium hexafluorophosphate as the photo-acid generator. All the initiators provided a molecular weight distribution below 1.7 for the MTEMPO/initiator ratio of 2, although at the ratio of unity, about half of the initiators produced the molecular weight distribution around 2.3–3.4. The UV analysis revealed that the initiators having a higher ε value tended to more strictly control the molecular weight and provide a higher initiator efficiency. The half-lives of the initiators had little effect on the molecular weight control and initiator efficiency.     

Polymer brushes grafted from graphene via bioinspired polydopamine chemistry and activators regenerated by electron transfer atom transfer radical polymerization

Polymer brushes decorated reduced GO (rGO) with advanced applications have been prepared by bioinspired polydopamine (PDA) chemistry integrated with activators regenerated by electron transfer atom transfer radical polymerization (ARGET‐ATRP) technique. First, rGO/PDA was obtained by the process for graphene oxide (GO) coated with a homogeneous bio‐adhesive PDA layer. Then the initiator 2‐bromoisobutyryl bromide (BIBB) was immobilized on the surface of PDA functionalized rGO. Finally, rGO/PDA‐Br was polymerized with N, N‐diethylaminoethyl methacrylate (DEAEMA) and glycidyl methacrylate (GMA) to obtain rGO/PDA‐g‐polymer brushes by ARGET‐ATRP process. The prepared rGO/PDA‐g‐PGMA brush would be subjected to further functionalization with ethylenediamine (EDA), which would impart the obtained products (rGO/PDA‐g‐PGMA‐NH₂) with good adsorption ability toward cationic dyes. The chemical structures and morphologies of the functionalized GO products have been characterized in detail by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, thermal gravimetric analysis (TGA), scanning electron microscope (SEM), transmission electron microscope(TEM), and atomic force microscopy (AFM). The distinctive pH‐responsive character of rGO/PDA‐g‐PDEAEMA and adsorption ability of rGO/PDA‐g‐PGMA‐NH₂ for cationic dyes have been explored by UV–vis spectrophotometer. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 689–698     

Synthesis of random polyampholyte brushes by atom transfer radical polymerization

We report the synthesis of random polyampholyte brushes containing 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and methacrylic acid (MAA). The preparation of polyampholyte brushes is performed by the “grafting from” strategy using surface‐initiated atom transfer radical polymerization (ATRP). The first step consists in the formation of the self‐assembled monolayer of the ATRP initiator. Secondly, the chains are grown from the surface by controlled/“living” radical polymerization. The random copolymer brushes and the corresponding homopolymers brushes containing 2‐(dimethylamino)ethyl methacrylate and tert‐butyl methacrylate (^tBuMA) are prepared. The last step is the deprotection of the ^tBuMA form to the MAA segment by in situ hydrolysis reaction. The annealed DMAEMA group can also be converted to the quenched form by in situ quaternization reaction. This results in the formation of “annealed” and “semiannealed” polyampholyte brushes. The “annealed” polyampholyte corresponds to the random copolymer that contains only annealed units, weak acid and weak base. The “semiannealed” polyampholyte consists of the mixture of annealed (weak acid) and quenched (quaternized segment) units. Polyampholyte brushes with various grafting densities are synthesized and carefully characterized using surface techniques such as ellipsometry and FTIR‐ATR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4305–4319, 2008     

Synthesis of thermally responsive cylindrical molecular brushes via a combination of nitroxide-mediated radical polymerization and “grafting onto” strategy

Loosely grafted amphiphilic molecular brushes consisting of a hydrophobic polystyrene backbone and hydrophilic poly(ethylene glycol) monomethyl ether (MPEG) side chains, PS-MPEG, were synthesized by a novel two step method. In the first step, well-defined linear poly(p-chloromethylstyrene) PCMS with the degree of polymerization DP ≈ 200 and polydispersity index, M_w/M_n = 1.4 was prepared by bulk nitroxide (TEMPO)-mediated radical polymerization (NMP). In the second step, pendant p-chloromethyl units were coupled with activated chains of poly(ethylene glycol) monomethyl ether (MPEG) during the course of the Williamson etherification reaction. Using MPEG with M_n = 1100 g/mol over 50% repeating units on PCMS underwent nucleophilic substitution yielding a densely grafted brush with theoretical molecular weight M_n,th ≈ 123,000 g/mol. The molecular brush PS-MPEG assumed conformation of a stiff cylinder in both dilute toluene (non-selective good solvent for PS backbone and MPEG grafts) and water (selective for MPEG grafts) solutions as determined by small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS). The contour length L = 570 Å and L = 694 Å obtained by fitting the scattering data using model of Sharp-Bloomfield, Pedersen-Schurtenberger and Kholodenko worm revealed dimensions corresponding to theoretically estimated size of a single molecular brush. It was found that PS-MPEG molecular brush in dilute aqueous solutions exhibited lower critical solution temperature (LCST) in the physiological range.     

Temperature-controlled flow switching in nanocapillary array membranes mediated by poly(N-isopropylacrylamide) polymer brushes grafted by atom transfer radical polymerization

We report actively controlled transport that is thermally switchable and size-selective in a nanocapillary array membrane (NCAM) prepared by grafting poly(N-isopropylacrylamide) (PNIPAAm) brushes onto the exterior surface of a Au-coated polycarbonate track-etched membrane. A smooth Au layer on the membrane surface, which is key to obtaining a uniform polymer film, was prepared by thermal evaporation of approximately 50 nm Au on both exterior surfaces. After evaporation, the inner diameter of the pore is reduced slightly, but the NCAM retains a narrow pore size distribution. PNIPPAm brushes with 10-30 nm (dry film) thickness were grafted onto the Au surface through surface-initiated atom transfer radical polymerization (ATRP) using a disulfide initiator, (BrC(CH3)2COO(CH2)11S)2. Molecular transport through the PNIPAAm polymer brush-modified NCAMs was investigated by real-time fluorescence measurements using fluorescein isothiocyanate (FITC)-labeled dextrans ranging from 4.4 to 282 kDa in membranes with variable initial pore diameters (80, 100, and 200 nm) and different PNIPAAm thicknesses. Manipulating the temperature of the NCAM through the PNIPAAm lower critical solution temperature (LCST) causes large, size-dependent changes in the transport rates. Over specific ranges of probe size, transport is completely blocked below the LCST but strongly allowed above the LCST. The combination of the highly uniform PNIPAAm brush and the monodisperse pore size distribution is critical in producing highly reproducible switching behavior. Furthermore, the reversible nature of the switching raises the possibility of using them as actively controlled filtration devices.     

Attapulgite grafted with polystyrene via a simultaneous reverse and normal initiation atom transfer radical polymerization

The surface grafting of attapulgite (ATP) with polystyrene (PS) was established via a simultaneous reverse and normal initiation atom transfer radical polymerization (SR&NIATRP). 4‐(chloromethyl)phenyltrimethoxysilane (CMPTMS) chemical bounded on the surface of ATP (ATP‐Cl, Cl‐I) was prepared via one‐step self‐assembly. SR&NI ATRP of styrene was conducted using CuCl₂ complex tris(2‐(dimethylamino)ethyl)amine (Me₆‐TREN) as the catalytic system, initiated by 2,2‐azobis(isobutyronitrile) (AIBN) and ATP‐Cl. FT‐IR, XRD, XPS, TGA and TEM data were consistent with the grafting of benzyl chloride groups and PS chains on ATP surface. The controllability of polymerization was investigated by the kinetics behavior under different molar ratio of AIBN and CuCl₂. The obtained polymer possessed a uniform distribution of molecular weights with a lower polydispersity index of 1.2～1.4. The relationship between polymerization on the surface of ATP and in solution was discussed in detail based on TGA data of hybrid particles and GPC trace of free polymer in solution. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1508–1516     

Controlled radical emulsion polymerization of polystyrene

In this paper, a new water-soluble initiator system, 2-bromopropane/CuSO₄/sodium ascorbate, was used as the initiator for emulsion polymerization. Radical emulsion polymerization of styrene was successfully carried out at 80 °C by using sodium dodecylbenzenesulfonate as the emulsifier. The 2-bromopropane/CuSO₄/sodium ascorbate-initiated emulsion polymerization shows the controlled free-radical polymerization features with linear growth of molecular weight. Polystyrene with a relatively high molecular weight and a narrow molecular weight distribution can be synthesized by this method. On the other hand, stable polystyrene latex can be obtained, and the size of the polystyrene latex increased with the increase in monomer conversion.