Radio-detection high-performance liquid chromatographic enzyme assay for inhibitors of fungal sterol delta 14-reductase

An enzyme assay for inhibitors of fungal sterol delta 14-reductase employing isocratic reversed-phase high-performance liquid chromatography is described. A Hypersil 5-microns octadecylsilyl (ODS) column (250 mm x 4.6 mm I.D.) was used and a mobile phase consisting of methanol-water-ethanol (86:4:10, v/v) was pumped at a flow-rate of 1.5 ml/min. Typical analysis times were 15 min. Using [4-14C]ignosterol as a substrate and an enzyme preparation from Saccharomyces cerevisiae, this method was used to compare the inhibition of sterol delta 14-reductase by the fungicides fenpropidin and fenpropimorph with three N-substituted 8-azadecaline compounds.     

Isolation of glycoprotein D from herpes simplex virus type 1 by gel filtration high performance liquid chromatography

Rabbit kidney (RK-13) and human jejunum and ileum (I-407) cells infected with herpes simplex virus type 1, strain F, were radiolabelled with [14C]glucosamine or [35S]methionine for 24 h. The cells were extracted with 1% Triton X-100 and the extracts were separated by gel filtration high performance liquid chromatography. Monoclonal antibody immunoprecipitation of the fractions collected from the column revealed a monomeric glycoprotein D (gD) of 52 - 56,000 molecular weight from RK-13 cells and two monomeric forms of gD, 54,000 and 58,000 molecular weight, from I-407 cells. Densitometry scanning of the autoradiograms from SDS-PAGE showed gD from the RK-13 host cells to be 98.7% pure with the [35S]methionine label and 97.0% pure with the [14C]glucosamine. On the other hand, gD from the I-407 host cells was only 78.6% with the [35S]methionine label and 96% pure with the [14C]glucosamine. This method could provide a means for the isolation of native gD for structural and immunological studies.     

Biosynthesis of cytochalasans. Part 4. The mode of incorporation of common naturally-occurring carboxylic acids into cytochalasin D1.

Utilization of sodium [1-¹⁴C]-, [2–¹⁴C]-, and [1,2-¹³C]-acetates, [1-¹⁴C]-, [1-¹³C]-, or [2-¹⁴C]-propionates, [1-¹⁴C]-or [2-¹⁴C]-malonates, of [1-¹⁴C]- or of [1-¹⁴C]-myristic acid, or of [1-¹⁴C]- and [1-¹⁴C]-palmitic acid in the biosynthesis of cytochalasin D ( 1 ) by Zygosporium masonii was determined by degradation studies or by carbon magnetic resonance spectroscopy. The precursors were incorporated primarily via the acetate-malonate pathway to generate 1 from nine intact acetate units, eight of which are coupled in a head to tail fashion to form the C₁₆-polyketide moiety.     

Determination of benzo[a]pyrene tetrols by column-switching capillary liquid chromatography with fluorescence and micro-electrospray ionization mass spectrometric detection

The present work displays capillary liquid chromatographic column switching methodology tailored for determination of benzo[a]pyrene tetrol isomers in biological matrices using on-line fluorescence and micro-electrospray ionization mass spectrometric detection. A well-established off-line crude solid phase extraction procedure was used in order to make the method compatible with several biological matrices. The solid phase extraction eluates were evaporated to dryness, redissolved in 1.0 ml methanol:water (10:90, v/v), loaded onto a 0.32 mm I.D. x 40 mm 5 microm Kromasil C(18) pre-column for analyte enrichment and back-flushed elution onto a 0.30 mm I.D. x 150 mm 3.5 microm Kromasil C(18) analytical column. The samples were loaded with a flow rate of 50 microl min(-1) and the tetrols were separated at a flow rate of 4 microl min(-1) with an acetonitrile:10 mM ammonium acetate gradient from 10 to 90%. A sample loading flow rate up to 50 microl min(-1) was allowed. The fluorescence excitation and emission were set to 342 and 385 nm, respectively, while mass spectrometric detection of the benzo[a]pyrene tetrols was obtained by monitoring their [M - H](-) molecular ions at m/z 319. The method was validated over the concentration range 0.1-50 ng ml(-1) benzo[a]pyrene tetrols in a cell culture medium with 100 microl injection volume, fluorescence detection and the first eluting tetrol isomer as model compound, resulting in a correlation coefficient of 0.993. The within-assay (n= 6) and between-assay (n= 6) precisions were determined to 2.6-8.6% and 3.8-9.6%, respectively, and the recoveries were determined to 97.9-102.4% within the investigated concentration range. The mass limit of detection (by fluorescence) was 3 pg for all the tetrol isomers, corresponding to a concentration limit of detection of 30 pg ml(-1) cell culture medium. The corresponding mass spectrometric mass limits of detection were 4-10 pg, corresponding to concentration limits of detection of 40-100 pg ml(-1) cell culture medium.     

Separation of radioactive metabolites in cultured tea cells fed with [14C]phenylalanine using high-speed counter-current chromatography

Separation of radioactive metabolites in cultured tea cells fed with [14C]phenylalanine was conducted using high-speed counter-current chromatography. Among seven components obtained our studies focused two metabolites, i.e. (-)-epicatechin and D,L-catechin. The specific radioactivity of (-)-epicatechin was 212.01 KBq/mg, amounting to 8.5% of the total radioactivity of ethyl acetate extract while that of D,L-catechin was 1.0006 MBq/mg or 5.4% of the total.     

Analysis of flunarizine in the presence of some of its degradation products using micellar liquid chromatography (MLC) or microemulsion liquid chromatography (MELC)--application to dosage forms

The separation of flunarizine hydrochloride (FLZ) and five of its degradation products--1-[bis(4-fluorophenyl)methyl]-4-(3-phenyl-2-propenyl)piperazine, 4-oxide (A), bis(4-fluorophenyl)methanone (B), bis(4-fluorophenyl)methanol (C), 1-(3-phenyl-2-propenyl)piperazine(D), and 1-[bis-4-fluorophenyl) methyl] piperazine (E)--could be accomplished by reversed phase liquid chromatography using either micellar or microemulsion mobile phases. Cyanopropyl-bonded stationary phase has been used with UV detection at 254 nm. Microemulsion mobile phase consisting of 0.15 M SDS, 10% n-propanol, 1% n-octanol, and 0.3% triethylamine in 0.02 M phosphoric acid of pH 7.0, has been used for the separation of FLZ and its degradation products (B, C, D, and E). Micellar mobile phases consisting of 0.15 M sodium dodecyl sulphate (SDS), 10% n-propanol, 0.3% triethylamine (TEA) in 0.02 M phosphoric acid of pH values either 4.0 or 6.8 have been used for the separation of FLZ from its degradation products, i.e. either from (B, C, D, and E) or from (A, B, C, and D), respectively. Micellar liquid chromatography (MLC) was applied to the determination of FLZ in pure form as well as in dosage forms; the calibration graph was linear over the concentration range of 0.15-50 microg/mL with detection limit of 0.02 microg/mL (4.19 x 10(-8)M).     

Ring-opening metathesis polymerization-derived large-volume monolithic supports for reversed-phase and anion-exchange chromatography of biomolecules

Preparative-scale monolithic columns up to 433.5 mL in volume were prepared via transition metal-catalyzed ring-opening metathesis polymerization (ROMP) from norborn-2-ene (NBE) and trimethylolpropane-tris(5-norbornene-2-carboxylate) (CL) using the 1(st)-generation Grubbs initiator RuCl(2)(PCy(3))(2)(CHPh) (Cy = cyclohexyl) (1) in the presence of a macro- and microporogen, i.e. of 2-propanol and toluene. To prepare large-volume monoliths, bulk polymerizations were completed within borosilicate or PEEK column formats with diameters in the range of 3 to 49 mm. The pore structure of the large-volume monoliths was investigated by electron microscopy and inverse-size exclusion chromatography (ISEC), respectively. Monolithic columns with inner diameters (I.D.s) in the range of 10-49 mm were tested for the separation of a mixture of five proteins, i.e., insulin, cytochrome C, lysozyme, conalbumin, and β-lactoglobulin. Preparative separation of these proteins was achieved within less than 12 min in a 433.5 mL monolithic column by applying gradient elution in the RP-HPLC mode. Furthermore, weak and strong anion exchangers were prepared via post-synthesis grafting of bicyclo[2.2.1]hept-5-en-2-yl-methyl-N,N-dimethylammonium hydrochloride (4) and bicyclo[2.2.1]hept-5-en-2-ylmethyl-N,N,N-trimethylammonium iodide (5), respectively. The weak and strong anion exchangers were used for the preparative-scale separation of 5'-phosphorylated oligodeoxythymidylic acid fragments of d[pT](12-18) at pH values ranging from 5 to 9.     

Identification and determination of 1 alpha,25-dihydroxyvitamin D3 in rat skin by high-performance liquid chromatography and radioreceptor assay

Endogenous 1 alpha,25-dihydroxyvitamin D3 [1,25-(OH)2D3] in normal rat skin was identified by using thermal isomerization to convert the metabolite into its pre-isomer, high-performance liquid chromatography (HPLC) and displacement potency with a chick intestinal cytosol receptor. When the metabolite in normal rat skin was determined by a radioreceptor assay after purification by Sep-Pak silica cartridge column chromatography and HPLC, the concentration was 71.0 +/- 6.6 pg/g of wet tissue (mean +/- S.D.). It is also shown that [3H]-1,25-(OH)2D3 and [3H]-25-hydroxyvitamin D3 administered intravenously in the mouse are located in the skin. These results suggest that the metabolite may play an important role in the skin.     

Semi-micro size-exclusion chromatography of polymers : Calibration of columns and comparison with conventional columns

Stainless-steel tubes having inside diameters of 1.5 mm and 1.8 mm were packed with polystyrene gels of particle diameter 10 ± 2 μm. Two 50 cm × 1.8 mm I.D. packed columns, connected in series, were calibrated and molecular-weight averages of polystyrene NBS 706 were measured, the results coinciding with the data of the National Bureau of Standards. The peak widths of polystyrenes of narrow molecular-weight distributions in both semi-micro column (four 25 cm × 1.5 mm I.D.) and conventional column (two 50 cm × 8 mm I.D.; packed by the manufacturer) systems were determined at different mobile-phase velocities, and the minimum peak width in the latter system was obtained at the velocity of 0.2 mm/sec, which was higher than that for the semi-micro system. The interstitial volume was higher and the inner volume was lower for the semi-micro column system (1.8 mm I.D.) than those for the conventional one, which means that semi-micro columns were packed less densely, resulting in a steep calibration curve. The peak height of a solute was proportional to the cell length of an ultraviolet detector if the sample load was proportional to the cross-sectional areas of columns having the same column efficiency. Although conventional size-exclusion chromatography has many advantages in respect of velocity, calibration curtve and sample peak height, semi-micro size-exclusion chromatography still holds some merits such as low consumption of gels and of mobile-phase solvents.     

A14-[125I]monoiodoinsulin purified by different high-performance liquid chromatographic procedures and by polyacrylamide gel electrophoresis: preparation, immunochemical properties and receptor binding affinity

Reversed-phase high-performance liquid chromatography (RP-HPLC) allows the rapid separation of A14-[125I]monoiodoinsulin directly from the iodination mixtures. It remains to be clarified, however, whether the RP-HPLC chromatographic conditions affect the properties of the purified tracer. In this study we prepared A14-[125I]insulin purified by polyacrylamide gel electrophoresis (PAGE) and by three different RP-HPLC mobile phases containing, respectively, ammonium acetate, sodium perchlorate and trifluoroacetic acid. The binding characteristics of all these tracers were examined using an insulin antiserum and insulin cell receptors. The specific radioactivity corresponded to the theoretical maximum for the RP-HPLC-purified tracers and was significantly lower for the PAGE-purified tracers. Significant differences were found in the binding of different tracers to the insulin antiserum: maximum binding ranged from 94 to 99% and was significantly lower for tracers purified by RP-HPLC eluents B and C; antiserum dilution giving 50% tracer binding was lower for tracers purified by RP-HPLC eluent B. The four insulin derivatives showed no difference in non-specific precipitation and in the affinity constant values calculated from the Scatchard analysis. No significant difference was found in the binding of the four insulin derivatives to the human-cultured IM-9 lymphocytes and to the human circulating monocytes. In conclusion, the present work demonstrates that the immunological properties of the A14-[125I]monoiodoinsulin purified by RP-HPLC may be partially affected by the composition of the mobile phase. In order to obtain a fully potent A14-[125I]insulin derivative and to have the possibility of comparing data from different laboratories, the chromatographic conditions must be taken into account.     

Capillary scale monolithic trap column for desalting and preconcentration of peptides and proteins in one- and two-dimensional separations

Monolithic columns based on poly-(styrene-divinylbenzene) (PS-DVB) were utilized both for preconcentration (in 10 mm x 0.20 mm I.D. format) and analytical separation (in 60 mm x 0.20 and 0.10 mm I.D. format) of peptides and proteins in column switching micro-scale high-performance liquid chromatography. A special holder for short monolithic preconcentration columns was designed and pressure durability tests approved long-term stability up to 400 bar. An 11-20% decrease in the average peak widths of nine peptides was obtained upon combining a preconcentration column with an analytical column as compared with a setup using an analytical column only. Trapping efficiency, especially for small and hydrophilic peptides, was optimized by using 0.10% heptafluorobutyric acid instead of 0.050% trifluoroacetic acid as solvent additive during sample loading. Using a 10 mm x 0.20 mm I.D. preconcentration column, loadabilities between 0.5 and 1.6 microg were determined by frontal analysis of proteins and bioactive peptides, respectively. A 100-fold concentration followed by direct on-line intact mass determination is demonstrated for diluted (3 micromolL(-1)) protein solutions. The applicability of the monolithic preconcentration column for multidimensional chromatography was tested by off-line two-dimensional separation, combining strong cation-exchange chromatography and ion-pair reversed-phase chromatography. Peptide identification data from digested protein mixtures demonstrated reproducibilities of 46-75% in triplicate analyses, and confident peptide identifications of low abundant peptides even in the presence of a 650-fold molar excess of high abundant peptides.     

Tris(eta4-naphthalene)- and tris(1-4-eta4-anthracene)tantalate(1-): first homoleptic arene complexes of anionic tantalum

Reduction of tantalum pentachloride by 6 equiv of sodium naphthalene in 1,2-dimethoxyethane provided, after recrystallization from tetrahydrofuran, 50-55% yields of yellow, pyrophoric [Na(THF)][Ta(C10H8)3]. The product was shown by 1H and 13C NMR spectra and an X-ray study (on the corresponding [Na(crypt 2.2.2)]salt) to be tris(eta4-naphthalene)tantalate(1-), 1, the first homoleptic naphthalene complex of a third row (5d) transition metal. Salts of 1 react under mild conditions with excess CO (1 atm pressure, -60 degrees to +20 degrees C) and 3 equiv of anthracene, C14H10 (20 degrees C), to give 99 and 52% yields of yellow [Ta(CO)6]- and orange [Ta(C14H10)3]-, (2), respectively. The latter is the first homoleptic anthracene complex of a group 5 element and only the third one known, the others being Cr(eta6-C14H10)2 and [Co(eta4-C14H10)2]-. NMR spectra and X-ray structural characterization, as the [Na(crypt 2.2.2)] salt, established 2 to be [Ta(1-4-eta4-C14H10)3]- and is very similar to 1 in solution and in the solid state. Salts of 2 also undergo facile ligand substitution reactions. For example, it reacts with 1,3,5,7-cyclooctatetraene, COT, at 20 degrees in THF to give high yields of the previously known [Ta(COT)3]-, which was structurally characterized as the Na(crypt 2.2.2)salt. One particularly important feature concerning 1 and 2 is that they are the first available synthons for "naked" atomic Ta- and promise to be useful reagents for the general exploration of low-valent tantalum chemistry. Also, 1 and 2 represent the first homoleptic arene tantalum complexes to have been prepared by conventional syntheses. The only previously known substance of this class is the neutral bis(benzene)tantalum(0), which was accessed by the co-condensation of atomic tantalum and benzene vapor in a sophisticated (electron-gun furnace equipped) metal atom reactor.     

An improved method for 14C-labelling of farnesylacetic acid and its geranyl ester

Farnesylacetic acid was efficiently labelled with 14C at the 5-position and gefarnate, a potent ulcer inhibitor, was prepared from it in radioactive form for use in metabolic studies. Condensation of [carbonyl-14C]acetyl chloride (5) with t-butyl 2-ethoxymagnesiomalonate (6) followed by acid-catalyzed deprotection and decarboxylation gave ethyl 3-oxo[3-14C]butanoate (8). Alkylation of the keto ester (8) with geranyl bromide (9) afforded the unsaturated keto ester (10), which was hydrolyzed and decarboxylated to give geranyl[2-14C]acetone (11). Grignard reaction of 11 with cyclopropylmagnesium bromide followed by treatment with hydrobromic acid yielded [4-14C]homofarnesyl bromide (13). Cyanation of 13 with potassium cyanide and subsequent hydrolysis gave [5-14C]farnesylacetic acid (1) in 6.1% yield from barium [14C]carbonate (3). Chlorination of 1 followed by esterification with geraniol afforded [5-14C]gefarnate (2) in 88% yield.     

Column switching and high-performance liquid chromatography in the analysis of amitriptyline, nortriptyline and hydroxylated metabolites in human plasma or serum.

A column-switching system for the direct injection of plasma or serum samples, followed by isocratic high-performance liquid chromatography and ultraviolet detection, is described for the simultaneous quantitation of the tricyclic antidepressant amitriptyline, its demethylated metabolite nortriptyline and the E- and Z-isomers of 10-hydroxyamitriptyline and 10-hydroxynortriptyline. The method included adsorption of amitriptyline and metabolites on a reversed-phase C8 clean-up column (10 microns; 20 mm x 4.6 mm I.D.), washing of unwanted material to waste and, after on-line column-switching, separation on a cyanopropyl analytical column (5 microns; 250 mm x 4.6 mm I.D.). The compounds of interest were separated and eluted using acetonitrile-methanol-0.01 M phosphate buffer (pH 6.8) (578:188:235, v/v) within less than 20 min. Various drugs frequently co-administered with amitriptyline or other antidepressants did not interfere with the determinations. In plasma samples spiked with 25-300 ng/ml, the recoveries were between 84 and 112% and the inter-assay coefficients of variation were 3-11%. After a minor modification, as little as 5 ng/ml could be quantitated. There were linear correlations (r greater than 0.99) between drug concentrations of 5-500 ng/ml and the detector signal. The method allows routine measurements of amitriptyline, nortriptyline and hydroxylated metabolites in blood plasma or serum of patients treated with amitriptyline or nortriptyline, and enables the results to be reported within 1 h.     

An improved method for the preparation of [<Superscript>14</Superscript>C]thiourea of high radiochemical purity

Summary An improved method for the preparation of [¹⁴C]thiourea of high radiochemical purity is described. [¹⁴C]thiourea is prepared by the barium cyanamide route and is purified by vacuum-sublimation. The labeled product showed ammonium [¹⁴C]thiocyanate as a radiochemical impurity in the range of 2-4%. This was further purified by silica-gel column chromatography to get the product having more than 99% radiochemical purity.     

Mechanism for activation of triosephosphate isomerase by phosphite dianion: the role of a hydrophobic clamp

The role of the hydrophobic side chains of Ile-172 and Leu-232 in catalysis of the reversible isomerization of R-glyceraldehyde 3-phosphate (GAP) to dihydroxyacetone phosphate (DHAP) by triosephosphate isomerase (TIM) from Trypanosoma brucei brucei (Tbb) has been investigated. The I172A and L232A mutations result in 100- and 6-fold decreases in k(cat)/K(m) for the isomerization reaction, respectively. The effect of the mutations on the product distributions for the catalyzed reactions of GAP and of [1-(13)C]-glycolaldehyde ([1-(13)C]-GA) in D(2)O is reported. The 40% yield of DHAP from wild-type Tbb TIM-catalyzed isomerization of GAP with intramolecular transfer of hydrogen is found to decrease to 13% and to 4%, respectively, for the reactions catalyzed by the I172A and L232A mutants. Likewise, the 13% yield of [2-(13)C]-GA from isomerization of [1-(13)C]-GA in D(2)O is found to decrease to 2% and to 1%, respectively, for the reactions catalyzed by the I172A and L232A mutants. The decrease in the yield of the product of intramolecular transfer of hydrogen is consistent with a repositioning of groups at the active site that favors transfer of the substrate-derived hydrogen to the protein or the oxygen anion of the bound intermediate. The I172A and L232A mutations result in (a) a >10-fold decrease (I172A) and a 17-fold increase (L232A) in the second-order rate constant for the TIM-catalyzed reaction of [1-(13)C]-GA in D(2)O, (b) a 170-fold decrease (I172A) and 25-fold increase (L232A) in the third-order rate constant for phosphite dianion (HPO(3)(2-)) activation of the TIM-catalyzed reaction of GA in D(2)O, and (c) a 1.5-fold decrease (I172A) and a larger 16-fold decrease (L232A) in K(d) for activation of TIM by HPO(3)(2-) in D(2)O. The effects of the I172A mutation on the kinetic parameters for the wild-type TIM-catalyzed reactions of the whole substrate and substrate pieces are consistent with a decrease in the basicity of the carboxylate side chain of Glu-167 for the mutant enzyme. The data provide striking evidence that the L232A mutation leads to a ca. 1.7 kcal/mol stabilization of a catalytically active loop-closed form of TIM (E(C)) relative to an inactive open form (E(O)).     

13C,15N]2-Acetamido-2-deoxy-D-aldohexoses and their methyl glycosides: synthesis and NMR investigations of J-couplings involving 1H, 13C, and 15N

[reaction: see text] A series of 2-amino-2-deoxy-D-[1-13C]aldohexoses and their methyl glycosides was prepared with use of a simplified cyanohydrin reduction route. Four d-aldopentosylamines (arabino, lyxo, ribo, xylo) were prepared from the corresponding D-aldopentoses by reaction with NH3(g) in MeOH solvent, isolated in solid form, and characterized by 13C and 1H NMR. Hydrolysis of beta-D-xylopyranosylamine was studied using 13C-labeled substrates to establish optimal solution conditions for cyanohydrin formation. Major hydrolytic intermediates were observed and identified by time-lapse 1D and 2D NMR analyses of reaction mixtures. The aldopentosylamines were subsequently employed in cyanohydrin reduction reactions with K13CN to yield C2-epimeric [1-13C]2-aminosugars, which were separated by chromatography on ion-exchange columns. N-Acetylation and methyl glycosidation followed by chromatography gave pure 2-acetamido-2-deoxy-D-[1-13C]aldohexopyranosides. J(CH) and J(CC) spin-spin coupling constants involving the labeled anomeric carbon were measured and compared to those observed previously in methyl D-[1-13C]aldohexopyranosides. In parallel studies, theoretical J-couplings were calculated in model N-acetylated aldopyranosides using density functional theory (DFT) to predict the effect of OH vs NHCOCH(3) substitution at C2 on J(CH) and J(CC) values in aldopyranosyl rings. The synthetic method was also modified to accommodate (15)N- and (13)C-labeling within the N-acetyl side-chain, and some J-couplings involving 1H, 13C, and 15N atoms in 2-[1,2-13C2;15N]acetamido-2-deoxy-D-[1-13C]glucose were measured and interpreted.     

On-line parallel reversed phase two-dimensional liquid chromatography for high-throughput analysis of complex proteomic samples

A comprehensive two-dimensional liquid chromatographic system (2D SCX/RP) is con- structed with a 10-port-2-way valve using strong cation exchange chromatography (Hypersil SCX, 100 mm×4.6 mm I.D.) followed by reversed phase chromatography (Hypersil BDS C18, 15 mm×4.6 mm I.D.) to separate the complex peptides from globin peptic hydrolysate. After the sample was loaded on the SCX column, the phosphate buffer (pH 4.0) was used to elute the peptides. Then, elutes flowed through the interface and the peptides focused on the head of the trapping columns (Hypersil BDS C18, 15 mm×4.6 mm I.D.) but salt passed into the waste. After the valve was switched, the samples were flushed with a backward flow into the RP analytical column. The peptides on the SCX were eluted with 12 discontinuous steps linearly increasing salt concentrations. The peptides enriched on the trapping column were desalted and separated by the RP columns. The resolution and the resolved peaks of the 2D SCX/RP system were greatly increased and the total peak capacity reached as high as 2280.     

Syntheses and structures of sterically congested linear and branched cobalta[n]triangulanes

Treatment of {eta(5):eta(1)[2-(di-tert-butylphosphanyl-P)ethyl]cyclopentadienyl}cobalt(I) chloride (5) with methylenecyclopropane (3) or bicyclopropylidene (4), as well as with their spirocyclopropanated analogues methylenespiropentane (7), cyclopropylidenespiropentane (10), or 7,7'-bi(dispiro[2.0.2.1]heptylidene) (15) in the presence of sodium amalgam at -50 degrees C, furnished the stable cobalt complexes 6, 9, 8, 11, and 16, respectively, in 72, 83, 84, 86, and 54 % isolated yield, respectively. The complexes 14 and 16 were also obtained by ligand exchange of the ethene complex {eta(5):eta(1)[2-(di-tert-butylphosphanyl-P)ethyl]cyclopentadienyl}(eta(2)-ethene)cobalt(I) (12) with 13 and 15 in 79 and 52 % yield, respectively. The X-ray crystal-structure analyses of complexes 9, 14, and 16, as well as the NMR-spectroscopic data of all complexes, reveal that they can be regarded as linear and branched cobalta[n]triangulanes. The thermal stability of complexes 6, 8, and 9 up to 109, 145, and 160 degrees C was determined by differential thermal analysis-thermogravimetry (DTA-TG) analysis.     

Increasing structure dimensionality of copper(I) complexes by varying the flexible thioether ligand geometry and counteranions

This work focuses on the systematic investigation of the influences of pyrimidine-based thioether ligand geometries and counteranions on the overall molecular architectures. A N-containing heterocyclic dithioether ligand 2,6-bis(2-pyrimidinesulfanylmethyl)pyridine (L1) and three structurally related isomeric bis(2-pyrimidinesulfanylmethyl)benzene (L2-L4) ligands have been prepared. On the basis of the self-assembly of CuX (X = I, Br, Cl, SCN, or CN) and the four structurally related flexible dithioether ligands, we have synthesized and characterized 10 new metal-organic entities, Cu4(L1)2I4 1, Cu4(L1)2Br4 2, [Cu2(L2)2I2.CH3CN]n 3, [Cu(L3)I]n 4, [Cu(L3)Br]n 5, [Cu(L3)CN]n 6, [Cu(L4)CN]n 7, [Cu2(L4)I2]n 8, [Cu2(L4)(SCN)2]n 9, and [[Cu6I5(L4)3](BF4).H2O]n 10, by elemental analyses, IR spectroscopy, and X-ray crystallography. Single-crystal X-ray analyses show that the 10 Cu(I) complexes possess an increasing dimensionality from 0D (1 and 2) to 1D (3-5) to 2D (6-9) to 3D (10), which indicates that the ligand geometry takes an essential role in the framework formation of the Cu(I) complexes. The influence of counteranions and pi-pi weak interactions on the formation and dimensionality of these coordination polymers has also been explored. In addition, the photoluminescence properties of Cu(I) coordination polymers 4-10 in the solid state have been studied.