Synthesis,Characterisation and Electrical Properties of Supramolecular DNA‐Templated Polymer Nanowires of 2,5‐(Bis‐2‐thienyl)‐pyrrole

Supramolecular polymer nanowires have been prepared by using DNA‐templating of 2,5‐(bis‐2‐thienyl)‐pyrrole (TPT) by oxidation with FeCl₃ in a mixed aqueous/organic solvent system. Despite the reduced capacity for strong hydrogen bonding in polyTPT compared to other systems, such as polypyrrole, the templating proceeds well. FTIR spectroscopic studies confirm that the resulting material is not a simple mixture and that the two types of polymer interact. This is indicated by shifts in bands associated with both the phosphodiester backbone and the nucleobases. XPS studies further confirm the presence of DNA and TPT, as well as dopant Cl^? ions. Molecular dynamics simulations on a [{dA₂₄:dT₂₄}/{TPT}₄] model support these findings and indicate a non‐coplanar conformation for oligoTPT over much of the trajectory. AFM studies show that the resulting nanowires typically lie in the 7–8 nm diameter range and exhibit a smooth, continuous, morphology. Studies on the electrical properties of the prepared nanowires by using a combination of scanned conductance microscopy, conductive AFM and variable temperature two‐terminal I–V measurements show, that in contrast to similar DNA/polymer systems, the conductivity is markedly reduced compared to bulk material. The temperature dependence of the conductivity shows a simple Arrhenius behaviour consistent with the hopping models developed for redox polymers.     

Synthesis, manipulation and conductivity of supramolecular polymer nanowires

The synthesis of supramolecular conducting nanowires can be achieved by using DNA and pyrrole. Oxidation of pyrrole in DNA-containing solutions yields a material that contains both the cationic polypyrrole (PPy) and the anionic DNA polymers. Intimate interaction of the two polymer chains in the self-assembled nanowires is indicated by FTIR spectroscopy. AFM imaging shows individual nanowires to be continuous, approximately 5 nm high and conformationally flexible. This feature allows them to be aligned by molecular combing in a similar manner to bare DNA and provides a convenient method for fabricating a simple electrical device by stretching DNA/PPy strands across an electrode gap. Current-voltage measurements confirm that the nanowires are conducting, with values typical for a polypyrrole-based material. In contrast to polymerisation of pyrrole on a DNA template in bulk solution, attempts to form similar wires by polymerisation at surface-immobilised DNA do not give a continuous coverage; instead, a beads-on-a-string appearance is observed suggesting that immobilisation inhibits the assembly process.     

以DNA为模板构造苯胺-DNA复合物纳米线和聚苯胺纳米导线

在溶液中, 以DNA为模板构造出了线性的苯胺-DNA复合物纳米线. 用压缩气流将得到的复合物纳米线拉直并固定到云母基底上. 用原子力显微镜(AFM)可观察到形貌规整的苯胺-DNA复合物纳米线. 苯胺单体在溶液中能从各个方向上组装到DNA分子上, 从而使DNA模板分子的表面包裹了一层苯胺. 以苯胺-DNA复合物纳米线为前驱体通过进一步化学氧化聚合得到了以DNA为模板的聚苯胺纳米导线.     

Fabricating and aligning pi-conjugated polymer-functionalized DNA nanowires: atomic force microscopic and scanning near-field optical microscopic studies

We report a simple method to functionalize DNA with pi-conjugated polymer, forming highly aligned and integrated arrays of pi-conjugated polymer nanowires of a few nanometers diameter. pi-conjugated polymer, polyphenazasiline, having alkylammonium salts on the N atom (PPhenaz-TMA), synthesized in this study can be directly attached to DNA, which can be organized along stretched and aligned DNA molecules on surfaces as a template. Furthermore, PPhenaz-TMA/DNA nanowires were stretched and aligned on surfaces, even when PPhenaz-TMA/DNA complexes formed in solutions. The resulting PPhenaz-TMA/DNA nanowires could be easily converted to oxidized states or metallic nanowires by using adequate oxidant or metal salts. The direct visualization of PPhenaz-TMA/DNA nanowires and its structural changes have been studied by atomic force microscopy and scanning near-field optical microscopy.     

Templating Ag on DNA/polymer hybrid nanowires: Control of the metal growth morphology using functional monomers

Ag nanowires and nanoparticles have been formed on hybrid λ-DNA/conducting polymer templates. The strong, but non-covalent, interaction of the conducting polymer with the double helix allowed us to incorporate chemical functionalities (alkynyl) into the DNA/conducting polymer strands by synthesis of functional monomers. Oxidative polymerisation of alkynyl-thienylpyrrole in the presence of λ-DNA produced conductive nanowires bearing alkyne groups; we show, using a combination of AFM, cAFM and EFM phase measurements that the alkyne functionality strong influences the subsequent templating reaction of Tollens’ reagent to produce uniform conductive nanowires comprised of many connected Ag clusters.     

Polymer-surfactant layered heterostructures by electropolymerization of phenosafranine in Langmuir-Blodgett films

Langmuir-Blodgett (LB) films of the water-soluble dye phenosafranine (PS) have been prepared by its adsorption from aqueous dye solution to an arachidic acid (AA) monolayer at the air-water interface. Atomic force microscopy (AFM) images of the LB films revealed the effect of change in pH of deposition on the degree of complexation of AA with the PS dye. Well-defined circular islands and holes were observed which disappeared with the increase in pH. Polarized absorption studies indicated that the dye molecules are oriented uniaxially with their long axis titled at a constant angle to the surface normal of the LB film. Within the restricted geometry of the LB film, the PS dye was electropolymerized to form a two-dimensional film of poly(phenosafranine) sandwiched between arachidic acid layers. The film was characterized by IR spectroscopy, cyclic voltammetry, and AFM. X-ray diffraction studies reveal the presence of a layer structure in the AA-PS LB film before and after polymerization. The polymer film showed highly anisotropic electrical conductivity of ca. 10 orders of magnitude. This indicates the formation of two-dimensional polyPS layers between arachidic acid layers resulting in a layered heterostructure film having alternate conducting and insulating regions. Also, the conductivity of the polyPS prepared from LB film was found to be approximately 2.5 times higher than the conductivity of polyPS prepared by solution polymerization method.     

Electric-field oriented polymer blend film for proton conduction

A novel proton conductor has been realized by employing a ternary polymer blend system in combination with an electric-field orientation technique. A polymer film recast from a solution containing poly(acrylic acid), poly(vinyl butyral), and fluoroalkyl graft polymer under 2 kV.cm(-1) exhibited 10 times higher proton conductivity than that prepared without the external electric field. However, when the film was prepared under a field higher than 4 kV.cm(-1), proton conductivity decreased. The membranous character has been investigated by SEM and AFM observations. As a result, it has been proven that an electric-field treatment of 2 kV.cm(-1) forms the largest hydrophilic domains for proton conduction in the film. The alteration of the phase separation morphology induced by the electric field well explains the proton conductivity change.     

Nanowires Formed by the Co‐Assembly of a Negatively Charged Low‐Molecular Weight Gelator and a Zwitterionic Polythiophene

Conjugated organic nanowires have been prepared by co‐assembling a carboxylate containing low‐molecular weight gelator (LMWG) and an amino acid substituted polythiophene derivative (PTT). Upon introducing the zwitterionic polyelectrolyte PTT to a basic molecular solution of the organogelator, the negative charges on the LMWG are compensated by the positive charges of the PTT. As a result, nanowires form through co‐assembly. These nanowires are visualized by both transmission electron microscopy (TEM) and atomic force microscopy (AFM). Depending on the concentration and ratio of the components these nanowires can be micrometers long. These measurements further suggest that the aggregates adopt a helical conformation. The morphology of these nanowires are studied with fluorescent confocal laser scanning microscopy (CLSM). The interactions between LMWG and PTT are characterized by steady‐state and time‐resolved fluorescence spectroscopy studies. The steady‐state spectra indicate that the backbone of the PTT adopts a more planar and more aggregated conformation when interacting with LMWG. The time‐ resolved fluorescence decay studies confirm this interpretation.     

Adsorbed surfactants as templates for the synthesis of morphologically controlled polyaniline and polypyrrole nanostructures on flat surfaces: from spheres to wires to flat films

Nanostructures of polyaniline (PAni) and polypyrrole (PPy) with controlled morphologies have been synthesized on atomically flat surfaces using adsorbed surfactant molecules as templates. Atomic force microscopy (AFM) has been used to investigate polymer film formation on highly oriented pyrolytic graphite (HOPG) and chemically modified HOPG. Morphological control over the resulting polymer film is possible by the addition of coadsorbing molecules, manipulation of the length of the surfactant hydrophobe, or by changing the surface chemistry of the adsorbing substrate. Phase transitions between spheres, cylinders/wires, and featureless films have been observed which exactly parallel transitions between spheres, cylinders, and flat layers in the adsorbed surfactant. Parallel arrays of PAni nanowires can be synthesized with alignment evident over large areas in a simple self-assembly technique in which fabrication and arrangement take place simultaneously. Such a technique in which one can engineer sub-100-nm-ordered nanoscale pi-conjugated polymer structures of a desired shape by a simple self-assembly process presents potential as templates, sensors, and microelectronic devices.     

以水作相分离造孔剂制备P(VDF-HFP)/PMMA聚合物电解质膜

介绍了一种以水代替常用的有机物质作为相分离造孔剂制备混合型聚合物电解质的新方法.所研究的混合型聚合物为聚(偏二氟乙烯-六氟丙烯)和聚甲基丙烯酸甲酯的混合物.扫描电镜SEM图表明这种混合型聚合物膜具有蜂窝状结构,有利于膜电导率的增加.利用FTIR,XRD和DSC等方法研究了混合型聚合物电解质中两种聚合物间的相互作用.用电化学交流阻抗方法测得在30℃下P(VDF-HFP)/PMMA摩尔比为1:1的混合型聚合物电解质的离子电导率为0.804×10^-3S/cm.对照其它方法,本方法具有制备容易、成本较低和有利于环境保护等优点.     

Preparation and electrical properties of ultrafine Ga2O3 nanowires

Uniform and well-crystallized beta-Ga2O3 nanowires are prepared by reacting metal Ga with water vapor based on the vapor-liquid-solid (VLS) mechanism. Electron microscopy studies show that the nanowires have diameters ranging from 10 to 40 nm and lengths up to tens of micrometers. The contact properties of individual Ga2O3 nanowires with Pt or Au/Ti electrodes are studied, respectively, finding that Pt can form Schottky-barrier junctions and Au/Ti is advantageous to fabricate ohmic contacts with individual Ga2O3 nanowires. In ambient air, the conductivity of the Ga2O3 nanowires is about 1 (Omega.m)-1, while with adsorption of NH3 (or NO2) molecules, the conductivity can increase (or decrease) dramatically at room temperature. The as-grown Ga2O3 nanowires have the properties of an n-type semiconductor.     

ZnO纳米线基MWNTs/PVDF复合热电材料的制备及特性研究

将不同比例的多壁碳管(MWNTs)与聚偏二氟乙烯(PVDF)聚合物混合后,喷涂于n型ZnO半导体纳米线阵列上,制备了一种新型ZnO纳米线基MWNTs/PVDF热电复合材料.与以往采用价格昂贵的p型与n型单壁碳纳米管(SWNTs)与聚合物混合制备的复合热电材料特性相比,这种新型热电复合材料在降低制造成本的同时,利用分散于聚合物中MWNTs的一维电子传输特性及形成的大量界面势垒,加上ZnO半导体纳米线具有的较高载流子密度与迁移率,提高了复合热电材料中电子的输运特性,增加了材料对声子的散射强度.测试发现,在一定的温度梯度下,随着MWNTs添加质量百分比的增加,热电材料的温差电动势和电导率也随之增加,但其Seebeck系数变化量不大.研究表明,这种热电材料有望替代采用p型与n型SWNTs构建的SWNTs/PVDF复合热电材料.研究结果对开发超轻、无毒、廉价、可应用于各种微纳电子领域的新型电源具有重要的参考价值.     

Metallized nanotube polymer composites via supercritical fluid impregnation

Although many metal decorated nanotubes and nanowires appear in the literature, well‐dispersed metal decorated nanotube polymer composites have rarely been reported because of the excessive density mismatch between the decorated nanotubes and polymer matrix. Here, we report a novel method to prepare well‐dispersed, highly functional, metallized nanotube polymer composites (MNPCs) that possess remarkably improved electrical conductivity and mechanical toughness. The MNPCs are prepared by supercritical fluid impregnation of an organometal compound into a premade well‐dispersed single wall carbon nanotube‐polymer composite film. The infused precursor preferentially migrates towards the nanotubes to undergo spontaneous reduction and form nanometer‐scale metal particles leading to an increase in the conductivity of the MNPC films. The environmentally friendly supercritical fluid impregnation process significantly improved the toughness of the composite films, regardless of the presence of metal. Additional functionality can be imparted into the resulting MNPC by infusing other precursors such as magnetic and catalytic metal compounds. © 2011 Wiley Periodicals, Inc.* J Polym Sci Part B: Polym Phys, 2012     

Polymer nanowire elastic moduli measured with digital pulsed force mode AFM

The mechanical bending behavior of polymer nanowires-polypyrrole and poly(3,4-ethylene dioxythiophene-co-styrene sulfonate)-produced by template molding were measured using a new innovation in atomic force microscopy (AFM). Digital pulsed force mode (DPFM) was used to image and simultaneously perform three-point bend tests along nanowires spanning microchannels in silicon. The bending profiles were analyzed for apparent elastic moduli variations along the suspended length of individually isolated nanowires and compared to classic beam deflection models for various geometric and boundary conditions. The elastic moduli calculated from these AFM data are 2-7 times that expected for bulk polymer values (approximately 1-3 GPa), demonstrating an apparent strengthening of nanostructured polymer even for diameters greater than 100 nm--the accepted boundary for nanoscience. Furthermore, detailed analysis of deflection data versus loading location demonstrates the experimental dependence on test geometry and inherent errors in relying solely on midpoint bending measurements or any single loading configuration for nanomechanical testing as well as the significant contribution of nanoindentation effects.     

Polyaniline nanowires on Si surfaces fabricated with DNA templates

It is essential to put individual, free-standing nanowires onto insulating substrates and integrate them to useful devices. Here we report a strategy for fabrication of conducting polymer nanowires on thermally oxidized Si surfaces by use of DNA as templates. The direct use of stretched and immobilized DNA strands as templates avoids the agglomeration of DNA caused by shielding of charges on DNA when polyaniline/DNA complexes formed in solution. Most importantly, the oriented DNA strands immobilized on the Si surface predetermine the position and the orientation of the nanowires. The approach described here is the first step toward uniting the programmable-assembly ability of DNA with the unique electronic properties of conducting polymers for high-density functional nanodevices. The conductivity of the nanowires is very sensitive to the proton doping-undoping process, suggesting that the nanowires hold great promise for sensitive chemical sensor applications.     

Magnesium indium oxide (MgIn2O4) spinel thin films: chemical spray pyrolysis (CSP) growth and materials characterizations

MgIn(2)O(4), which has an inverse spinel structure, has been adopted as the transparent material in optoelectronic device fabrication due to its high optical transparency and electrical conductivity. Such a technologically important material was prepared by the spray pyrolysis technique. Precursors prepared for the cationic ratio Mg/In=0.5 were thermally sprayed onto glass substrates at 400 and 450 degrees C. We report herein the preparation and characterization of the films by X-ray diffraction (XRD), energy-dispersive absorption X-ray spectroscopy (EDAX), and atomic force microscopy (AFM). The XRD results showed the single phase formation of the material that revealed the presence of Mg(2+) and In(3+) in the inverse spinel-related structure. The FTIR and EDAX results further confirmed that the nanocrystalline films were mainly composed of magnesium, indium, and oxygen, in agreement with XRD analysis. We surmised from the AFM micrographs that the atoms have enough diffusion activation energy to occupy the correct site in the crystal lattice. For the 423-nm-thick magnesium indium oxide films grown at 400 degrees C, the electrical conductivity was 5.63x10(-6) Scm(-1) and the average optical transmittance was 63% in the visible range (400-700 nm). Similar MgIn(2)O(4) films deposited at 450 degrees C have a conductivity value of 1.5x10(-5) Scm(-1) and an average transmittance of 75%. Hall coefficient observations showed n-type electrical conductivity and high electron carrier concentration of 2.7x10(19) cm(-3).     

Confinement effects on electromigration of long DNA molecules in an ordered cavity array

Confinement effects on the electromigration of long dsDNA molecules in an array of well-ordered, molecular sized cavities interconnected by nanopores are described. The array was prepared by replicating the structure of a colloidal crystal of microspheres in a polymer matrix. Both conformation and mobility studies show that the electrophoretic behavior of large DNA molecules is distinct from that in gels and other microfabricated sieves, showing a peak in mobility versus electric field, and an inversion in the separation order with field strength. A simple model was proposed to interpret this unexpected observation qualitatively. We conclude that the molecular behavior of DNA can be modified by the combination of entropic effect and electric trapping as a consequence of both unique geometry and conductivity of this cavity array material. This approach provides insights for design and optimization of on-chip molecular sieving structures for rapid separation of long DNA molecules. It may lead to a promising material for manipulation and size fractionation of other biological macromolecules.     

Cast thin film biosensor design based on a Nafion backbone, a multiwalled carbon nanotube conduit, and a glucose oxidase function

Novel electroanalytical sensing nanobiocomposite materials are reported. These materials are prepared by mixing multiwalled carbon nanotubes (MWNTs), a Nafion cation exchanger, and glucose oxidase (GOD) in appropriate amounts. The MWNTs are cylindrical with a diameter in the range 40-60 nm and with a length of up to several micrometers, and they provide electrical conductivity. Nafion acts as a polymer backbone to give stable and homogeneous cast thin films. Both MWNTs and Nafion provide negative functionalities to bind to positively charged redox enzymes such as glucose oxidase. The resulting biosensing composite material is inexpensive, reliable, and easy to use. The homogeneity of the MWNT-Nafion-GOD nanobiocomposite films was characterized by atomic force microscopy (AFM). Amperometric transducers fabricated with these materials were characterized electrochemically using cyclic voltammetry and amperometry in the presence of hydrogen peroxide and in the presence of glucose. Their linear response to hydrogen peroxide was demonstrated. The glucose biosensor sensitivity was strongly influenced by the glucose oxidase concentration within the nanobiocomposite film. The optimized glucose biosensor (2.5 mg/mL GOD) displayed a sensitivity of 330 nA/mM, a linear range of up to 2 mM, a detection limit of 4 microM, and a response time of <3 s.     

电化学沉积金纳米线结构及其电学特性

用电化学沉积方法，在有机介孔模板上制备出直径为90 nm的金纳米线.透射电子显微镜（TEM）分析结果表明，纳米线表面光滑并呈单晶结构.去除有机模板的金纳米线阵列用扫描电子显微镜（SEM）测试，纳米线顶端呈平台状，直径分布均一.我们利用原子力显微镜（AFM）测量了金纳米线阵列的微观结构，得到与SEM相一致的结果.在大气和室温条件下，用导电AFM针尖在接触模式下测量了单根纳米线的轴向I－V特性曲线，其结果为金属性.     

A simple and convenient route to prepare poly(vinylidene fluoride trifluoroethylene) copolymer nanowires and nanotubes

Poly(vinylidene fluoride trifluoroethylene) copolymer nanowires and nanotubes have been prepared for the first time via a high temperature (相似文献