白硼钙石的合成新方法及其热化学研究(英)

0IntroductionTherearemanykindsofhydratedcalciumbo-rates,bothnaturalandsynthetic.Someofthemarematerialsusedinglass,potteryandporcelainenamelindustry,especiallyinunalkaliglassindustry.4CaO·5B2O3·7H2O,calledpriceite,isacalciumboratemin-eral,notfoundinCaO-B…     

Synthesis, Characterization and Thermochemistry of 2MgO：B2O3：1.5H2O

Introduction　　 2MgO·B2 O3(Mg2 B2 O5)and 2MgO·B2 O3·H2 Omightbepreparedaswhiskermaterials .12MgO·B2 O3·H2 OnamedszaibelyiteisamagnesiumboratemineralwithastructuralformulaofMg2 [B2 O4 (OH) 2 ].2 Itisdifficulttosynthesizethiscompoundinthelaboratory .Recently ,weobtainedasimilarcompound 2MgO·B2 O3·1 5H2 Owhenwetriedtopreparewhiskerof 2MgO·B2 O3·H2 Obythephasetransformationof 2MgO·2B2 O3·MgCl2 ·14H2 OinH3BO3solutionunderhydrothermalcondition .Itishope fultopreparewh…     

Hydrothermal synthesis and thermodynamic properties of 2CaO·3B<Subscript>2</Subscript>O<Subscript>3</Subscript>·H<Subscript>2</Subscript>O

2CaO·3B₂O₃·H₂O which has non-linear optical (NLO) property was synthesized under hydrothermal condition and identified by XRD, FTIR and TG as well as by chemical analysis. The molar enthalpy of solution of 2CaO·3B₂O₃·H₂O in HCl·54.572H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HCl·54.501H₂O and of CaO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5733.7±5.2) kJ mol⁻¹ of 2CaO·3B₂O₃·H₂O was obtained. Thermodynamic properties of this compound were also calculated by a group contribution method.     

Synthesis and Thermodynamic Properties of MgO·B_2O_3·4H_2O

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｒｅａｒｅｍａｎｙｋｉｎｄｓｏｆｍａｇｎｅｓｉｕｍｂｏｒａｔｅｓ ,ｂｏｔｈｎａｔｕｒａｌａｎｄｓｙｎｔｈｅｔｉｃ .Ａｂｏｒａｔｅｄｏｕｂｌｅｓａｌｔ (2ＭｇＯ·2Ｂ2 Ｏ3 ·ＭｇＣｌ2 · 14Ｈ2 Ｏ)ｎａｍｅｄｃｈｌｏｒｏｐｉｎｎｏｉｔｅｗａｓｏｂ ｔａｉｎｅｄｆｒｏｍｔｈｅｎａｔｕｒａｌｃｏｎｃｅｎｔｒａｔｅｄｓａｌｔｌａｋｅｂｒｉｎｅ .1Ｉｎｏｒｄｅｒｔｏｆｉｎｄｔｈｅｆｏｒｍｉｎｇｒｅｌａｔｉｏｎｂｅｔｗｅｅｎｔｈｅｄｏｕｂｌｅｓａｌｔａｎｄｍａｇｎｅｓｉｕｍ ｂｏｒａ…     

Thermodynamic properties of hydrated cesium pentaborate

The enthalpies of solution of β-CsB₅O₈ · 4H₂O in HCl (aq), and of CsCl in (HCl + H₃BO₃) (aq) were determined. With the incorporation of the previously determined enthalpy of solution of H₃BO₃ in HCl (aq) and the standard molar enthalpies of formation of CsCl (s), H₃BO₃ (s), HCl (aq), and H₂O (l), the standard molar enthalpy of formation of β-CsB₅O₈ · 4H₂O of −(4846.29 ± 0.58) kJ · mol⁻¹ was obtained. Thermodynamic properties of this compound were also calculated by a group contribution method.     

Thermochemistry of two lead borates; Pb(BO2)2·H2O and PbB4O7·4H2O

Two pure hydrated lead borates, Pb(BO₂)₂·H₂O and PbB₄O₇·4H₂O, have been characterized by XRD, FT-IR, DTA-TG techniques and chemical analysis. The molar enthalpies of solution of Pb(BO₂)₂·H₂O and PbB₄O₇·4H₂O in 1 mol dm^?3 HNO₃(aq) were measured to be (?35.00 ± 0.18) kJ mol^?1 and (35.37 ± 0.14) kJ mol^?1, respectively. The molar enthalpy of solution of H₃BO₃(s) in 1 mol dm^?3 HNO₃(aq) was measured to be (21.19 ± 0.18) kJ mol^?1. The molar enthalpy of solution of PbO(s) in (HNO₃ + H₃BO₃)(aq) was measured to be ?(61.84 ± 0.10) kJ mol^?1. From these data and with incorporation of the enthalpies of formation of PbO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpies of formation of ?(1820.5 ± 1.8) kJ mol^?1 for Pb(BO₂)₂·H₂O and ?(4038.1 ± 3.4) kJ mol^?1 for PbB₄O₇·4H₂O were obtained on the basis of the appropriate thermochemical cycles.     

Standard enthalpy of formation of metal (K,Ba, Li,Ca, Gd,Pb, Cu And Zn) salts of NTO

From measurements of the enthalpy of solution of metal salts of 3-nitro-1,2,4-triazol-5-one (NTO) in water, the standard enthalpies of formation of KNTO·H₂O, Ba(NTO)₂·3H₂O, LiNTO·2H₂O, Ca(NTO)₂·4H₂O and Gd(NTO)₃·7H₂O were determined as ?(676.9±2.6), ?(1627.0±2.5), ?(966.6.3±2.2), ?(1905.5±4.4) and ?(3020.1±6.4) kJ·mol^?1, respectively. From measurements of the enthalpy of precipitation of KNTO·H₂O crystal with Pb(NO₃)₂(aq), CuSO₄(aq) and Zn(NO₃)₂(aq), the standard enthalpies of formation of Pb(NTO)₂·H₂O, Cu(NTO)₂·2H₂O and Zn(NTO)₂·H₂O were determined as ?(247.4±5.9), ?(712.1±5.4) and ?(628.8±5.7) kJ·mol^?1, respectively.     

Thermodynamic properties of two zinc borates: 3ZnO·3B2O3·3.5H2O and 6ZnO·5B2O3·3H2O

Two pure zinc borates with microporous structure 3ZnO·3B₂O₃·3.5H₂O and 6ZnO·5B₂O₃·3H₂O have been synthesized and characterized by XRD, FT-IR, TG techniques and chemical analysis. The molar enthalpies of solution of 3ZnO·3B₂O₃·3.5H₂O(s) and 6ZnO·5B₂O₃·3H₂O(s) in 1 mol · dm⁻³ HCl(aq) were measured by microcalorimeter at T = 298.15 K, respectively. The molar enthalpies of solution of ZnO(s) in the mixture solvent of 2.00 cm³ of 1 mol · dm⁻³ HCl(aq) in which 5.30 mg of H₃BO₃ were added were also measured. With the incorporation of the previously determined enthalpy of solution of H₃BO₃(s) in 1 mol · dm⁻³ HCl(aq), together with the use of the standard molar enthalpies of formation for ZnO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpies of formation of −(6115.3 ± 5.0) kJ · mol⁻¹ for 3ZnO·3B₂O₃·3.5H₂O and −(9606.6 ± 8.5) kJ · mol⁻¹ for 6ZnO·5B₂O₃·3H₂O at T = 298.15 K were obtained on the basis of the appropriate thermochemical cycles.     

Hydrothermal synthesis and thermochemistry of metalloborophosphate of Na2[CuB3P2O11(OH)]·0.67H2O

The pure hydrated metalloborophosphate sample, Na₂[CuB₃P₂O₁₁(OH)]·0.67H₂O, has been synthesized and characterized by XRD, FT-IR, DTA-TG techniques, and chemical analysis. The molar enthalpies of solution of Na₂[CuB₃P₂O₁₁(OH)]·0.67H₂O(s) in 1 mol · dm^?3 HCl (aq), of Cu(OH)₂ (s) in (HCl + H₃BO₃) (aq), and of NaH₂PO₄·2H₂O (s) in (HCl + H₃BO₃ + Cu(OH)₂) (aq) were measured, respectively. With the incorporation of the previously determined enthalpy of solution of H₃BO₃ (s) in 1 mol · dm^?3 HCl (aq), together with the use of the standard molar enthalpies of formation for NaH₂PO₄·2H₂O (s), Cu(OH)₂ (s), H₃BO₃ (s), and H₂O (l), the standard molar enthalpy of formation of ?(4988.4 ± 2.5) kJ · mol^?1 for Na₂[CuB₃P₂O₁₁(OH)]·0.67H₂O at T = 298.15 K was obtained on the basis of the appropriate thermochemical cycle.     

Isopiestic Determination of the Osmotic and Activity Coefficients of Li2SO4(aq) at T=298.15 and 323.15 K, and Representation with an Extended Ion-Interaction (Pitzer) Model

Isopiestic vapor-pressure measurements were made for Li₂SO₄(aq) from 0.1069 to 2.8190 mol?kg^?1 at 298.15 K, and from 0.1148 to 2.7969 mol?kg^?1 at 323.15 K, with NaCl(aq) as the reference standard. Published thermodynamic data for this system were reviewed, recalculated for consistency, and critically assessed. The present results and the more reliable published results were used to evaluate the parameters of an extended version of Pitzer’s ion-interaction model with an ionic-strength dependent third-virial coefficient, as well as those of the standard Pitzer model, for the osmotic and activity coefficients at both temperatures. Published enthalpies of dilution at 298.15 K were also analyzed to yield the parameters of the ion-interaction models for the relative apparent molar enthalpies of dilution. The resulting models at 298.15 K are valid to the saturated solution molality of the thermodynamically stable phase Li₂SO₄?H₂O(cr). Solubilities of Li₂SO₄?H₂O(cr) at 298.15 K were assessed and the selected value of m(sat.)=3.13±0.04 mol?kg^?1 was used to evaluate the thermodynamic solubility product K _s(Li₂SO₄?H₂O, cr, 298.15 K) = (2.62±0.19) and a CODATA-compatible standard molar Gibbs energy of formation Δ_f G _m ^o (Li₂SO₄?H₂O, cr, 298.15 K) = ?(1564.6±0.5) kJ?mol^?1.     

New synthetic method and thermochemistry of szaibelyite

A new synthetic method of szaibelyite (2MgO·B₂O₃·H₂O) has been reported. The enthalpy of solution of 2MgO·B₂O₃·H₂O in 2.9842 mol dm⁻³ HCl (aq) was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in 2.9842 mol dm⁻³ HCl (aq) and of MgO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of MgO (s), H₃BO₃ (s), and H₂O (l), the standard molar enthalpy of formation of −(2884.36±1.82) kJ mol⁻¹ of 2MgO·B₂O₃·H₂O was obtained.     

Thermodynamic properties of chloropinnoite

The molar enthalpies of solution of 2MgO · 2B₂O₃ · MgCl₂ · 14H₂O in approximately 1 mol · dm⁻³ aqueous hydrochloric acid (HCl) and of MgCl₂ · 6H₂O(s) in aqueous (approximately 1 mol · dm⁻³ HCl + MgCl₂ + H₃BO₃) at T=298.15 K were determined. From a combination of these results with measured enthalpies of solution of boric acid (H₃BO₃) in HCl(aq) and of magnesium oxide (MgO) in aqueous (HCl + H₃BO₃) solution, together with the standard molar enthalpies of formation of MgO(s), H₃BO₃(s), MgCl₂ · 6H₂O(s) and H₂O(l), the standard molar enthalpy of formation of −(8812 ± 3) kJ · mol⁻¹ of 2MgO · 2B₂O₃ · MgCl₂ · 14H₂O was obtained. Thermodynamic properties of this compound were also calculated by group contribution method.     

Electrochemical polymerization of polyaniline doped with Zn2+ as the electrode material for electrochemical supercapacitors

Polyaniline doped with Zn²⁺ (PANI/Zn²⁺) films was synthesized by cyclic voltammetric method on stainless steel mesh substrates in 0.2 mol L^?1 aniline and 0.5 mol L^?1 sulfuric acid electrolyte with various concentrations of zinc sulfate (ZnSO₄·7H₂O). The structure and morphology of PANI and PANI/Zn²⁺ films were characterized by Fourier transform infrared, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy techniques, respectively. The electrochemical properties of PANI and PANI/Zn²⁺ films were investigated by cyclic voltammetry, galvanostatic charge–discharge test, and electrochemical impedance spectroscopy in 0.5 mol L^?1 H₂SO₄ electrolyte in a three-electrode system. The results show that the surface morphology of PANI/Zn²⁺ is more rough than that of pure PANI. The specific capacitance of the PANI/Zn²⁺ film displays a larger specific capacitance of 738 F g^?1, lower resistance, and better stability as compared with the pure PANI film. Thus, good capacitive performance demonstrates its potential superiority for supercapacitors.     

Determination of Catechol by a Laccase Biosensor Based on Silica-Modified Zirconia Nanoparticles

A promising nanotechnological material, zirconia nanoparticles modified with SiO₂, was used as a medium for the immobilization of laccase to construct a novel biosensor that exhibits sensitive amperometric response to catechol in 0.1 mol · L^?1 phosphate buffer (pH 6.0) using cyclic voltammetry. The linear response to catechol was from 1.0 × 10^?6 to 1.0 × 10^?4 mol · L^?1 and the detection limit was 3.5 × 10^?7 mol · L^?1 at a signal-to-noise ratio of 3. The biosensor exhibited good stability, precision, and few interferences.     

Determination of Polyethylene Glycol Monoester Acrylate and Polyethylene Glycol Diester Acrylate Using Reversed-Phase High-Performance Liquid Chromatography

A procedure was developed for the determination of polyethylene glycol monoester acrylate (PEGMA) and polyethylene glycol diester acrylate (PEGDA) by reversed-phase high performance liquid chromatographic (RP-HPLC) with UV detector. Sample was well separated on an SinoChrom ODS-BP (C-18) column (200 × 4.6 mm i.d., 5 μm) with mobile phases composed of acetonitrile-phosphate buffer solution (0.05 mol · L^?1 pH = 6.86) in the ratio of 42:58 (v/v). The PEGMA and PEGDA were detected by UV detector at 205 nm, and quantitatively analyzed with an external standard of methyl acrylate. For PEGMA, the linear response ranged from 0.40 × 10^?5 mol · L^?1 to 2.00 × 10^?3mol · L^?1 (r² > 0.999), the detection limit was 0.12 × 10^?5 mol · L^?1, the recovery rate was found to be 93.4%–99.7%. For PEGDA, the linear response ranged from 0.20 × 10^?5 mol · L^?1 to 1.00 × 10^?3mol · L^?1 (r² > 0.999), the detection limit was 0.04 × 10^?5 mol · L^?1, the recovery rate was found to be 99.1% ～ 105.8%. This quantitative method can also be used in the HPLC analysis of other α,β-unsaturated esters.     

Simultaneous Analysis of Sugars and Polyphenols in Tobacco by CZE with Amperometric Detection Based on a Cu2O/MWCNT-COOH Composite Electrode

A composite electrode was fabricated from Cu₂O powder, carboxyl-functionalized multi-wall carbon nanotubes (MWCNT-COOH), and paraffin oil in the proportions 51:17:32 (w/w). This composite electrode was used for amperometric detection (CZE–AD) in simultaneous capillary zone electrophoretic analysis of chlorogenic acid, rutin, sucrose, glucose, mannose, and fructose in tobacco samples. Under the optimum conditions, the six analytes could be separated in 100 mmol L^?1 NaOH buffer within 30 min. Good linearity was achieved in the range 1 × 10^?7–1 × 10^?4 mol L^?1 for the two polyphenols and 5 × 10^?6–1 × 10^?3 mol L^?1 for the four sugars. The detection limits (S/N = 3) for the polyphenols and sugars were as low as 10^?8 mol L^?1 and 10^?6 mol L^?1, respectively.     

Syntheses,structures and luminescent properties of a series of ladder-shaped [Ln2Sr3] heterometal-organic frameworks

A series of Ln^III–Sr^II heterometallic coordination polymers formulated as [Ln₂Sr₃(pda)₆(H₂O)₁₈]·nH₂O (Ln = Pr-1, n = 14; Nd-2, n = 12; Sm-3, n = 11; Eu-4, n = 11; Gd-5, n = 16; Tb-6, n = 13; Dy-7, n = 13) were synthesized via assembly of Ln(NO₃)₃·6H₂O, SrCl₂·6H₂O, pyridine-2,6-dicarboxylic acid (H₂pda) and imidazole (im) in H₂O/C₂H₅OH solution. Single crystal X-ray diffraction revealed that they are isostructural. All of these complexes possess ladder-shaped 1-D chain structures. The luminescent properties of Sm-3, Eu-4, Gd-5, Tb-6 and Dy-7 have been investigated. The solid-state quantum yields and the lifetimes of Eu-4 and Tb-6 are also studied.     

Extraction and theoretical study on complexation of the strontium cation with antamanide

By using extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium Sr²⁺(aq) + 2A^?(aq) + 1(nb) ? 1·Sr²⁺(nb) + 2A^?(nb) occurring in the two-phase water–nitrobenzene system (A^? = picrate, 1 = antamanide; aq = aqueous phase, nb = nitrobenzene phase) was determined as log K _ex (1·Sr²⁺, 2A^?) = ?0.3 ± 0.1. Further, the stability constant of the 1·Sr²⁺ complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β _nb (1·Sr²⁺) = 8.8 ± 0.1. Finally, applying quantum mechanical density functional level of theory calculations, the most probable structure of the cationic complex species 1·Sr²⁺ was derived. In the resulting complex, the “central” cation Sr²⁺ is bound by six bond interactions to the corresponding six oxygen atoms of the parent ligand 1. The interaction energy of the considered 1·Sr²⁺ complex was found to be ?1,114.9 kJ/mol, confirming the formation of this cationic species as well.     

Preparation and Thermal Chemical Property of Complexes of Zinc Nitrate with Trytophan

IntroductionZincisanessentialtraceelementtothelife .Manydiseasesarousedfromadeficiencyofzincelementhavere ceivedconsiderableattention .L α Aminoacidsarebasicunitsofproteins .L α Trytophanisoneoftheeightspeciesofaminoacidsindispensableforlife ,whichhastobeab sorbedfromfoodbecauseitcannotbesynthesizedinthehumanbody .InviewofthecomplexesofL α trytophanandessentialelementsasaddictiveswidelyusedinsuchfieldsasfoodstuff,medicineandcosmetic ,1 3theyhaveabroadenprospectforapplications .Briefly ,ab…     

Thermogravimetric study of the dehydration reaction of LiCl·H<Subscript>2</Subscript>O

The dehydration of LiCl·H₂O was studied under inert helium atmosphere by DTA/TG for different heating rates. The dehydration of LiCl·H₂O proceeds through a two step reaction between 99–110 and 160–186°C, respectively. It leads to the formation of LiCl·0.5H₂O as intermediate compound. The proposed mechanism is: and Based on the temperature peak of the DTA signals the activation energies of the two reactions were determined to be 240 kJ mol⁻¹ (step 1) and 137 kJ mol⁻¹ (step 2), respectively.