Crystallization, mechanical properties and in vitro bioactivity of sol–gel derived Na2O–CaO–SiO2–P2O5 glass–ceramics by partial substitution of CaF2 for CaO

The partial substitution of CaF₂ for CaO in the Na₂O–CaO–SiO₂–P₂O₅ system was conducted by the sol–gel method and a comparison of the glass–ceramic properties was reported. Based on thermogravimetric and differential thermal analysis, the gels were sintered with a suitable heat treatment procedure. The glass–ceramic properties were characterized by X-ray diffraction, fourier-transform infrared spectroscopy, scanning electron microscopy, energy dispersive spectrometer and so on, and the bioactivity of the glass–ceramic was evaluated by in vitro assays in simulated body fluid. Results indicate that with the partial substitution of CaF₂ for CaO in glass composition, the volume density, apparent porosity, bending strength and microhardness of the glass–ceramics have been significantly improved. Furthermore, CaF₂ promotes glass crystallization which does not inhibit the glass–ceramic bioactivity.     

Comparison of the impact of the addition of three alkaline earth metal oxides BaO,SrO and ZnO on sintering of glass–ceramic glazes from the SiO2–Al2O2–CaO–MgO–Na2O–K2O system

Journal of Thermal Analysis and Calorimetry - Glazes are the most important elements in the technology of producing the ceramic wares. They not only give aesthetic effects, like color and gloss,...     

Effect of zinc oxide on microhardness and sintering behavior of MgO–Al2O3–SiO2 glass–ceramic system

Glass–ceramic in the MgO–Al₂O₃–SiO₂ system with crystallization ability of gahnite (ZnO·Al₂O₃) and mullite were synthesized. It was found that the glass–ceramic containing gahnite phase had desirable mechanical behavior and reached to an acceptable hardness and density. The compositions were designed based on magnesium oxide replacement (from MgO–Al₂O₃–SiO₂ glass–ceramic system) with zinc oxide. Glass–ceramics were characterized by DTA, X-ray diffraction and scanning electron microscopy. Heat treatment at 1100 °C cause form gahnite crystals in glass–ceramic. Microhardness increased with increasing gahnite crystals. To achieve good mechanical properties, the initially formed high gahnite phase must transform.     

Structure of Na2O–MgO–CaO–SiO2 glasses by combined Raman spectroscopy and thermodynamic modeling approach

The present contribution deals with the Raman spectra and structure of Na₂O–MgO–CaO–SiO₂ glasses. Six glasses with the trisilicate overall composition 15Na₂O·xMgO·(10–x)CaO·75SiO₂ (x = 0, 2, 4, 6, 8, 10) were studied. The structure of studied glasses was described by the thermodynamic model of Shakhmatkin and Vedishcheva. From the 27 components with the stoichiometry given by the composition of stable crystalline phases, only eight were found in significant abundance in the studied glasses—namely: SiO₂, 2MgO·SiO₂ (M2S), MgO·SiO₂ (MS), Na₂O·3CaO·6SiO₂ (NC3S6), Na₂O·CaO·5SiO₂ (NCS5), Na₂O·MgO·4SiO₂ (NMS4), Na₂O·SiO₂ (NS), and Na₂O·2SiO₂ (NS2). The correlation analysis points out that the strong positive correlations between the equilibrium molar amounts of: {M2S–MS–SiO₂}, {NC3S6–NCS5}, and {NMS4–NS–NS2}. From the components of significant abundance, only the content of MS and NC3S6 change significantly within the studied compositional series. These two components were identified with the result of the principal component analysis of Raman spectra that indicated the presence of two independent spectral components. Using the method of Malfait the partial Raman spectra of MS and NC3S6 components were found. The obtained results very well reproduce the experimental Raman spectra and confirmed in such way the thermodynamic model.     

Synthesis and characterization of SiO2–gel microparticles as injectable implant biomaterials

Microparticles with a core–shell structure were synthesized from SiO₂ particles as core and thermally sensitive hyaluronate–poly(N-isopropylacrylamide) (HA–PNIPAM) hydrogel as shell. The SiO₂–HA–PNIPAM microparticles were injectable at room temperature and assembled to settle on to biosurfaces. Dynamic light-scattering measurements at different temperatures showed that the temperature-dependence of the diameters (d) of SiO₂–HA–PNIPAM microparticles was reversible. d decreased abruptly when the temperature was increased to their lower critical solution temperature of 307 K. The Mw of HA and the extent of modification by glycidyl methacrylate, D _m, had clear effects on the sizes of the microparticles and their thermal sensitivity. Fluorescein, selected as model drug, was encapsulated in the gel shell to study the dynamics of drug release by this microparticle at body temperature.     

New insights into the bioactivity of SiO2–CaO and SiO2–CaO–P2O5 sol–gel glasses by molecular dynamics simulations

The structures of binary xCaO · (100 ? x)SiO₂ glasses with x = 10, 20 and 30 mol-% and ternary (20 ? x)CaO · xP₂O₅ · 80SiO₂ glasses with x = 3, 10, 15, 17 and 20 mol-% have been studied by means of classical molecular dynamics simulations using both the melt-quenched and the sol–gel protocols. The structural picture derived correlates the bioactive behaviour to the combined effects of the connectivity of the extended silicate network and to the tendency to form (or not to form) non-homogeneous domains. In this context, a mathematical relationship that relates the Ca/P ratio in the Ca phosphate micro-segregation zones to the P₂O₅ content in ternary glasses has been developed and this has been used to fine-tuning the optimum amount of P in a glass for its highest in vitro bioactivity. The composition with optimal Ca/P ratio, 80Si–14.8Ca–5.2P, has been synthesized and the results of bioactivity tests have confirmed the prediction.     

Sol–gel derived cordierite glass–ceramic doped CaO and B2O3: sintering, crystallization and phase transformation characteristics

In the present work, cordierite glass–ceramic with stoichiometric composition containing 5 wt% CaO and different amounts of B₂O₃ was prepared by sol–gel processing. The powders were synthesized by tetraethyl orthosilicate (TEOS), magnesium and aluminum chlorides. Crystallization and sintering behavior of glass–ceramics was investigated at different temperatures. Different steps of phase transformations to cordierite have been studied by DSC and XRD. Various phases have been formed at different heat-treatment temperatures. The results showed that adding 1 wt% B₂O₃ led to a decrease in both the glass transition temperature (T_g) and the crystallization peak temperature (T_p). In contrast, with increasing B₂O₃ content from 1 to 3 and 5 wt%, both T_g and T_p of samples increased. The results of sintering showed that crystallization before complete sintering hindered good sintering. However, low content of B₂O₃ relatively improved sintering than the others.     

Raman spectroscopic study of CuO–V2O5–P2O5–CaO glass system

In order to evidence the structural changes induced by CuO and V₂O₅ in the phosphate glass network and their modifier or former role, x(CuO·V₂O₅)(100 − x)[P₂O₅·CaO] glass system was prepared and investigated using Raman spectroscopy (0 ≤ x ≤ 40 mol%).Raman spectra of the studied glasses present the specific bands of the phosphate glasses at low concentration of transition metal (TM) ions, but at higher concentration (x > 7 mol%) a strong depolymerization of the phosphate network appears; non-bridging oxygen atoms are involved in VOP and CuOP bonds and new short units are formed. For a high concentration of V₂O₅ (x > 10 mol%) the Raman bands of V₂O₅ prevail in the spectra; this fact suggests that vanadium oxide imposes its structural units in the network acting thus as a network glass former.2D correlation analysis was also applied for the concentration-dependent Raman spectra in order to verify the assignments of the vibration modes and to find correlations in the changes induced by TM ions content. 2D correlation maps indicate a good correlation between the bands at ∼705 cm⁻¹ assigned to POP stretching vibration and at ∼1175 cm⁻¹ assigned to PO₂ groups which suggest the depolymerization of the phosphate network. The correlation between the 1270 cm⁻¹ and 930 cm⁻¹ bands also suggests that V₂O₅ oxide is responsible for PO bonds breaking and POV formation.     

Synthesis, characterization and flame retardant of UV-curable hybrid coatings containing SiO2–P2O5–B2O3 via sol–gel method

A ternary sol containing silicon, phosphorus and boron modified by ??-methacryloxypropyltrimethoxysilane was synthesized by sol?Cgel method. The ternary sol was incorporated into the organic matrix and UV-curable organic/inorganic hybrid coating materials were obtained. Hardness, transmittance, haze, cross-cut adhesion and abrasion resistance results showed that the mechanical properties of the hybrid coatings improved effectively with no comprising on optical properties by increasing sol content. Scanning electron microscopy and Energy Dispersive X-ray spectrometer studies indicated that inorganic particles were homogenously dispersed in the organic matrix. The flame retardancy of the UV-curable coatings was investigated by thermogravimetric analysis and microscale combustion calorimeter. The results showed that the incorporation of sol into the organic network led to an improvement in the thermal stability and flame retardancy of the hybrid coating materials. It is a desirable achievement to improve simultaneously both flame retardancy and mechanical properties of the coatings.     

Surface characteristics and corrosion resistance of sol–gel derived CaO–P2O5–SrO–Na2O bioglass–ceramic coated Mg alloy by different heat-treatment temperatures

To improve the initial corrosion resistance and then make the degradation rate of magnesium alloys to meet the biomedical application, crack-free CaO–P₂O₅–SrO–Na₂O bioglass-ceramic coatings were synthesized on AZ31 magnesium alloy substrates using a sol–gel dip-coating technique followed by a heat-treatment in the temperature range of 400–500 °C. The effects of heat-treatment on the phase constituents, surface characteristics and corrosion resistances of the coatings were investigated. It was shown that the crystallization of Ca₂P₂O₇ occurred after the glass was treated at 400 °C. As the temperature increased from 400 °C to 450 °C, besides main phase Ca₂P₂O₇, β-Ca(PO₃)₂ and Ca₄P₆O₁₉ were identified as minor crystal phases in the glass–ceramic. No new phase was detected with the temperature increasing to 500 °C except for the further crystallization. Meanwhile, the water contact angles of the coatings decreased with the increase of heat-treatment temperature due to the great crystallization. The corrosion resistances of the coated magnesium alloys were studied by electrochemical corrosion techniques in the simulated body fluid. The results revealed that the coating heat-treated at 400 °C exhibited superior corrosion resistance because of less crystallization, suggesting that the calcium phosphate bioglass–ceramic coating can provide effective protection for magnesium alloy substrate to control its initial degradation in vivo and maintain the desired mechanical properties.     

Synthesis of nanostructural Yttrium fluorosilicate glass ceramic via sol–gel method

Journal of Sol-Gel Science and Technology - The yttrium fluorosilicate glass ceramic pieces were prepared by sol–gel method starting from yttrium acetate, trifluoroacetic acid, and...     

Effect of CaO additive on sintering and crystallization behavior of cordierite glass–ceramic prepared by sol–gel method

In the present work, cordierite glass–ceramic was prepared via sol–gel method using TEOS, AlCl₃·6H₂O, MgCl₂·6H₂O as starting materials. Different steps of phase transformations to cordierite have been studied by DSC and XRD. Various phases have been formed at different heat-treatment temperatures. Addition of CaO led to an increase in both the formation rate and the intensity of α-cordierite. Sinterability of the samples was determined too. The results showed that high content of CaO improved sintering. Morphology of hexagonal prism for α-cordierite was displayed by SEM.     

Synthesis and characterization of SiO2–CrO3, SiO2–MoO3, and SiO2–WO3 mixed oxides produced using the non-hydrolytic sol–gel process

Silica-based mixed oxide xerogels, namely SiO₂–CrO₃, SiO₂–MoO₃, and SiO₂–WO₃, were prepared using the non-hydrolytic sol–gel process. The materials were synthesized using metal chloride:tetraethoxysilane (TEOS) molar ratios of 0.1:2; 0.2:2 and 0.4:2 for each metal chloride and 1:2 SiCl₄:TEOS molar ratio. All of the xerogels containing Cr, Mo or W had considerably greater surface areas than that of SiO₂. The small angle X-ray scattering experiments suggest that the surface roughness of the aggregates in SiO₂–CrO₃ is less than that of SiO₂–MoO₃ and SiO₂–WO₃. The morphological characteristics of the silica-based mixed oxide xerogels were not affected by the nature and amount of metal chloride employed in the synthesis. An irregular morphology was observed for SiO₂–CrO₃, SiO₂–MoO₃ and SiO₂–WO₃, but a lamellar structure was observed for SiO₂. X-ray photoelectron spectroscopy analysis suggests that tungsten species were preferentially distributed on the outmost part of the grain. The resulting particle diameter was shown to be lower for the mixed oxides compared to that of bare silica. Furthermore, the presence of metals (Cr, Mo and W) on silica caused a decrease in the size of the particles as the atomic radii of these metals increased. According to the Fourier transform infrared spectroscopy and Raman, Cr, Mo and W were incorporated within the silica framework.     

Influence of SrO content on microstructure and crystallization of glazes in the SiO2–Al2O3–CaO–MgO–K2O system

The effect of the SrO addition on the microstructure and structure of the glazes from the SiO₂–Al₂O₃–CaO–MgO–K₂O system was investigated in this study. The results were obtained by testing the ability of the frits crystallization, the stability of the crystallizing phases during the single-step fast-firing cycle depending on their chemical composition and the effect of addition of strontium oxide. Differential scanning calorimetry (DSC) curves showed that all glazes crystallized, and diopside and anorthite were mainly identified as dominant phases in the obtained glazes, while the size and amount of each depended on the amount of SrO introduced. The thermal characteristic of the frits was carried out using DSC, and crystalline phases were determined by X-ray diffractometry. The glaze microstructure was investigated by scanning electron microscopy and transmission electron microscopy. Additional information on the microstructure of frits was derived from spectroscopic studies in the mid-infrared range.

     

Distribution of species in Na2O–CaO–B2O3 glasses as probed by FTIR

The article presents a simple method that can be used to get the concentration of various species in mixed-modifier borate glasses. By using the fraction of four coordinated boron in xCaO (30 − x)Na₂O70B₂O₃ (0 ≤ x ≤ 27.5 mol%) and xCaO(40 − x)Na₂O60B₂O₃ glasses (10 ≤ x ≤ 40 mol%), the concentration of BO₄⁻ and asymmetric BO₃ units related to each modifier oxide could be determined. CaO has a greater tendency to form asymmetric BO₃ units in the first glass series, while Na₂O has the ability to form BO₄ units to a greater extent. In xCaO(40 − x)Na₂O60B₂O₃ glasses, BO₄⁻ and asymmetric BO₃ units are formed at the same rate from Na₂O and CaO. The fraction of four coordinated boron, can be predicted by treating the studied glasses as if they are mixtures of Na₂O–B₂O₃ and CaO–B₂O₃ matrices. The change in N₄ is due to change in the relative concentration of these matrices.