Crystal Structures,Magnetic Properties and Catecholase‐Like Activities of μ‐Alkoxo‐μ‐Carboxylato Double Bridged Dinuclear and Tetranuclear Copper(II) Complexes

One μ‐alkoxo‐μ‐carboxylato bridged dinuclear copper(II) complex, [Cu₂(L¹)(μ‐C₆H₅CO₂)] ( 1 )(H₃L¹ = 1,3‐bis(salicylideneamino)‐2‐propanol)), and two μ‐alkoxo‐μ‐dicarboxylato doubly‐bridged tetranuclear copper(II) complexes, [Cu₄(L¹)₂(μ‐C₈H₁₀O₄)(DMF)₂]·H₂O ( 2 ) and [Cu₄(L²)₂(μ‐C₅H₆O₄]·2H₂O·2CH₃CN ( 3 ) (H₃L² = 1,3‐bis(5‐bromo‐salicylideneamino)‐2‐propanol)) have been prepared and characterized. The single crystal X‐ray analysis shows that the structure of complex 1 is dimeric with two adjacent copper(II) atoms bridged by μ‐alkoxo‐μ‐carboxylato ligands where the Cu···Cu distances and Cu‐O(alkoxo)‐Cu angles are 3.5 11 Å and 132.8°, respectively. Complexes 2 and 3 consist of a μ‐alkoxo‐μ‐dicarboxylato doubly‐bridged tetranuclear Cu(II) complex with mean Cu‐Cu distances and Cu‐O‐Cu angles of 3.092 Å and 104.2° for 2 and 3.486 Å and 129.9° for 3 , respectively. Magnetic measurements reveal that 1 is strong antiferromagnetically coupled with 2J =‐210 cm^?1 while 2 and 3 exhibit ferromagnetic coupling with 2J = 126 cm^?1 and 82 cm^?1 (averaged), respectively. The 2J values of 1–3 are correlated to dihedral angles and the Cu‐O‐Cu angles. Dependence of the pH at 25 °C on the reaction rate of oxidation of 3,5‐di‐tert‐butylcatechol (3,5‐DTBC) to the corresponding quinone (3,5‐DTBQ) catalyzed by 1–3 was studied. Complexes 1–3 exhibit catecholase‐like active at above pH 8 and 25 °C for oxidation of 3,5‐di‐tert‐butylcatechol.     

Potassium,rubidium and ammonium salts of μ‐(formato‐κ2O:O′)‐μ‐oxido‐bis[oxidobis(peroxido‐κ2O,O′)molybdate(VI)]

The unit‐cell parameters of the three title salts, namely, tripotassium, K₃[Mo₂(CHO₂)O₃(O₂)₄], trirubidium, Rb₃[Mo₂(CHO₂)O₃(O₂)₄], and triammonium μ‐(formato‐κ²O:O′)‐μ‐oxido‐bis[oxidobis(peroxido‐κ²O,O′)molybdate(VI)], (NH₄)₃[Mo₂(CHO₂)O₃(O₂)₄], which were all crystallized at pH 3, are quite similar, but the potassium and rubidium salt structures are noncentrosymmetric, whereas that of the ammonium salt is centrosymmetric. Formate acts as an O:O′‐bridging ligand in the complex anion and is bound to a μ‐oxido‐bis(oxidodiperoxidomolybdate) unit.     

catena‐Poly[potassium [copper(II)‐μ‐isothiocyanato‐μ‐N‐salicylidene‐β‐alaninato(2–)]]

The title polymeric compound, catena‐poly­[dipotassium [bis­[μ‐N‐salicyl­idene‐β‐alaninato(2−)]‐κ⁴O,N,O′:O′′;κ⁴O′′:O,N,O′‐dicopper(II)]‐di‐μ‐iso­thio­cyanato‐κ²N:S;κ²S:N], {K[Cu(NCS)(C₁₀H₉NO₃)]}_n, consists of [iso­thio­cyanato(N‐salicyl­idene‐β‐alaninato)copper(II)]⁻ anions connected through the two three‐atom thio­cyanate (μ‐NCS) and the two anti,anti‐μ‐­carboxyl­ate bridges into infinite one‐dimensional polymeric anions, with coulombically interacting K⁺ counter‐ions with coordination number 7 constrained between the chains. The Cu^II atoms adopt a distorted tetragonal–bipyramidal coordination, with three donor atoms of the tridentate Schiff base and one N atom of the bridging μ‐NCS ligand in the basal plane. The first axial position is occupied by a thio­cyanate S atom of a symmetry‐related μ‐NCS ligand at an apical distance of 2.9770 (8) Å, and the second position is occupied by an O atom of a bridging carboxyl­ate group from an adjacent coordination unit at a distance of 2.639 (2) Å.     

Observation of a CuII2(μ‐1,2‐peroxo)/CuIII2(μ‐oxo)2 Equilibrium and its Implications for Copper–Dioxygen Reactivity

Synthesis of small‐molecule Cu₂O₂ adducts has provided insight into the related biological systems and their reactivity patterns including the interconversion of the Cu^II₂(μ‐η²:η²‐peroxo) and Cu^III₂(μ‐oxo)₂ isomers. In this study, absorption spectroscopy, kinetics, and resonance Raman data show that the oxygenated product of [(BQPA)Cu^I]⁺ initially yields an “end‐on peroxo” species, that subsequently converts to the thermodynamically more stable “bis‐μ‐oxo” isomer (K_eq=3.2 at ?90 °C). Calibration of density functional theory calculations to these experimental data suggest that the electrophilic reactivity previously ascribed to end‐on peroxo species is in fact a result of an accessible bis‐μ‐oxo isomer, an electrophilic Cu₂O₂ isomer in contrast to the nucleophilic reactivity of binuclear Cu^II end‐on peroxo species. This study is the first report of the interconversion of an end‐on peroxo to bis‐μ‐oxo species in transition metal‐dioxygen chemistry.     

(μ‐Tri‐tert‐butoxysilanethiol­ato)­bis[(tetra­hydro­furan)lithium(I)] and catena‐poly[[bis­(μ‐tri‐tert‐butoxy­silanethiol­ato)dilithium(I)]‐μ‐dimethoxy­ethane]: solvent coordination as the structure‐forming factor

The title compounds, μ‐(tri‐tert‐butoxy­silanethiol­ato‐κ²S:S)‐bis[(tetra­hydro­furan‐κO)lithium(I)], [Li₂(C₁₂H₂₇O₃SSi)₂(C₄H₈O)₂], (I), and catena‐poly[[bis­(μ‐tri‐tert‐butoxysilanethiol­ato)‐1:2κ²S;1κS:2κS,O‐dilithium(I)]‐μ‐dimethoxy­ethane‐κ²O:O′], [Li₂(C₁₂H₂₇O₃SSi)₂(C₄H₁₀O₂)]_n, (II), were obtained by the reaction of tri‐tert‐butoxy­silanethiol with metallic lithium. The crude product, when recrystallized from tetra­hydro­furan (THF) yields (I), and when recrystallized from 1,2‐dimethoxy­ethane (DME) gives (II). Compound (I) forms centrosymmetric dimers in the solid state with an Li₂S₂ central core, whereas (II) forms infinitely long chains, in which the centrosymmetric dimeric units are linked together by the bidentate DME ligand (also residing on an inversion centre), thus forming a coordination polymer. The formation of a one‐dimensional structure in (II) is a consequence of replacement of a monodentate THF solvent mol­ecule with a bidentate DME mol­ecule.     

(PPh4)2[Cl2Re(N3S2)(μ‐NSN)(μ‐N≡ReCl3)]2 – ein Rhenium(VII)‐Komplex mit einer Nitrido‐, einer Dinitridosulfato(II)‐ und einer Rhena‐3,5‐dithia‐2,4,6‐triazino‐Funktion

(PPh₄)₂[Cl₂Re(N₃S₂)(μ‐NSN)(μ‐N≡ReCl₃)]₂ – a Rhenium(VII) Complex with a Nitrido, a Dinitridosulfato(II), and a Rhena‐3,5‐dithia‐2,4,6‐triazino Function The title compound has been prepared from PPh₄[Re^VIICl₄(NSCl)₂] with N(SiMe₃)₃ in dichloromethane solution to give red‐brown single crystals, which were suitable for a crystal structure determination. As a by‐product PPh₄[ReNCl₄] is formed. (PPh₄)₂[Cl₂Re^VII(N₃S₂)(μ‐NSN)(μ‐N≡Re^VIICl₃)]₂ ( 1 ): Space group P2₁/c, Z = 2, lattice dimensions at –80 °C: a = 1280.8(2), b = 1017.5(1), c = 2467.8(3) pm, β = 95.04(1)°, R = 0.049. The complex anion of 1 consists of a planar ReN₃S₂‐heterocycle which is connected with the second rhenium atom by a μ‐nitrido bridge as well as by a μ‐dinitridosulfato(II) ligand to form a planar Re₂(N)(NSN) six‐membered heterocycle. This [Cl₂Re(N₃S₂)(μ‐NSN)(μ‐N≡ReCl₃)]^– unit dimerizes via one of the N‐atoms of the (NSN)^4– ligand to give a centrosymmetric Re₂N₂ four‐membered ring.     

Complexes of nickel(II) and copper(II) with 1,2,4‐triazole‐3‐carboxylic acid and of cobalt(III) with 3‐amino‐1,2,4‐triazole‐5‐carboxylic acid

Because of their versatile coordination modes and strong coordination ability for metals, triazole ligands can provide a wide range of possibilities for the construction of metal–organic frameworks. Three transition‐metal complexes, namely bis(μ‐1,2,4‐triazol‐4‐ide‐3‐carboxylato)‐κ³N ²,O :N ¹;κ³N ¹:N ²,O‐bis[triamminenickel(II)] tetrahydrate, [Ni₂(C₃HN₃O₂)₂(NH₃)₆]·4H₂O, (I), catena‐poly[[[diamminediaquacopper(II)]‐μ‐1,2,4‐triazol‐4‐ide‐3‐carboxylato‐κ³N ¹:N ⁴,O‐[diamminecopper(II)]‐μ‐1,2,4‐triazol‐4‐ide‐3‐carboxylato‐κ³N ⁴,O :N ¹] dihydrate], {[Cu₂(C₃HN₃O₂)₂(NH₃)₄(H₂O)₂]·2H₂O}_n , (II), (μ‐5‐amino‐1,2,4‐triazol‐1‐ide‐3‐carboxylato‐κ²N ¹:N ²)di‐μ‐hydroxido‐κ⁴O :O‐bis[triamminecobalt(III)] nitrate hydroxide trihydrate, [Co₂(C₃H₂N₄O₂)(OH)₂(NH₃)₆](NO₃)(OH)·3H₂O, (III), with different structural forms have been prepared by the reaction of transition metal salts, i.e. NiCl₂, CuCl₂ and Co(NO₃)₂, with 1,2,4‐triazole‐3‐carboxylic acid or 3‐amino‐1,2,4‐triazole‐5‐carboxylic acid hemihydrate in aqueous ammonia at room temperature. Compound (I) is a dinuclear complex. Extensive O—H…O, O—H…N and N—H…O hydrogen bonds and π–π stacking interactions between the centroids of the triazole rings contribute to the formation of the three‐dimensional supramolecular structure. Compound (II) exhibits a one‐dimensional chain structure, with O—H…O hydrogen bonds and weak O—H…N, N—H…O and C—H…O hydrogen bonds linking anions and lattice water molecules into the three‐dimensional supramolecular structure. Compared with compound (I), compound (III) is a structurally different dinuclear complex. Extensive N—H…O, N—H…N, O—H…N and O—H…O hydrogen bonding occurs in the structure, leading to the formation of the three‐dimensional supramolecular structure.     

Two new soluble iron–oxo complexes: [Fe2(μ‐O)(μ‐O2CCF3)2(O2CCF3)2(C10H8N2)2] and [Fe4(μ3‐O)2(μ‐O2CCF3)6(O2CCF3)2(C10H8N2)2]·CF3CO2H

Two new iron–oxo clusters, viz. di‐μ‐tri­fluoro­acetato‐μ‐oxo‐bis­[(2,2′‐bi­pyridine‐κ²N,N′)(tri­fluoro­acetato‐κO)­iron(III)], [Fe₂O(CF₃CO₂)₄(C₁₀H₈N₂)₂], and bis(2,2′‐bi­pyridine)­di‐μ₃‐oxo‐hexa‐μ‐tri­fluoro­acetato‐bis­(tri­fluoro­acetato)­tetrairon(III) tri­fluoro­acetic acid solvate, [Fe₄O₂(CF₃CO₂)₈(C₁₀H₈N₂)₂]·CF₃CO₂H, contain dinuclear and tetranuclear Fe^III cores, respectively. The Fe^III atoms are in distorted octahedral environments in both compounds and are linked by oxide and tri­fluoro­acetate ions. The tri­fluoro­acetate ions are either bridging (bidentate) or coordinated to the Fe^III atoms via one O atom only. The fluorinated peripheries enhance the solubility of these compounds. Formal charges for all the Fe centers were assigned by summing valences of the chemical bonds to the Fe^III atom.     

(18‐Crown‐6)‐μ‐oxo‐hexa­kis(tetra­hydro­borato)diuranium(IV): an unprecedented asymmetric dinuclear complex

In the title compound, (1,4,7,10,13,16‐hexa­oxacyclo­octa­decane‐1κ⁶O)‐μ‐oxo‐1:2κ²O:O‐hexa­kis(tetra­hydro­borato)‐1κ³H;2κ²H;2κ²H;2κ³H;2κ³H;2κ³H‐diuranium(IV), [U₂(BH₄)₆O(C₁₂H₂₄O₆)], one of the U atoms (U1), located at the centre of the crown ether moiety, is bound to the six ether O atoms, and also to a tridentate tetra­hydro­borate group and a μ‐oxo atom in axial positions. The other U atom (U2) is bound to the same oxo group and to five tetra­hydro­borate moieties, three of them tridentate and the other two bidentate. The two metal centres are bridged by the μ‐oxo atom in an asymmetric fashion, thus giving the species (18‐crown‐6)(κ³‐BH₄)U=(μ‐O)—U(κ³‐BH₄)₃(κ²‐BH₄)₂, in which the U1=O and U2—O bond lengths to the μ‐O atom [1.979 (5) and 2.187 (5) Å, respectively] are indicative of the presence of positive and negative partial charges on U1 and U2, respectively.     

Molybdän‐ und Wolfram‐Komplexe mit MNS‐Sequenzen. Die Kristallstrukturen von [MoCl3(N3S2)(1,4‐Dioxan)2] und [Mo2Cl2(μ‐NSN)2(μ‐O)(NCMe3)(OCMe3)2]2

Molybdenum and Tungsten Complexes with MNS Sequences. Crystal Structures of [MoCl₃(N₃S₂)(1,4‐dioxane)₂] and [Mo₂Cl₂(μ‐NSN)₂(μ‐O)(NCMe₃)(OCMe₃)₂]₂ The cyclo‐thiazeno complexes [Cl₃MNSNSN]₂ of molybdenum and tungsten react with 1,4‐dioxane in dichloromethane suspension to give the binuclear donor‐acceptor complexes [μ‐(1,4‐dioxane){MCl₃(N₃S₂)}₂] which are characterized by IR spectroscopy. With excess 1,4‐dioxane the molybdenum compound forms the complex [MoCl₃(N₃S₂)(1,4‐dioxane)₂] in which, according to the crystal structure determination, one of the dioxane molecules coordinates at the molybdenum atom, the other one at one of the sulfur atoms of the cyclo‐thiazeno ring. The μ‐(NSN^2–) complex [Mo₂Cl₂(μ‐NSN)₂(μ‐O)(NCMe₃)(OCMe₃)₂]₂ has been obtained by the reaction of [MoN(OCMe₃)₃] with trithiazyle chloride in carbontetrachloride solution. According to the crystal structure determination this compound forms centrosymmetric dimeric molecules via two of the nitrogen atoms of two of the μ‐(NSN) groups to give a Mo₂N₂ fourmembered ring. [MoCl₃(N₃S₂)(1,4‐dioxane)₂]: Space group P2₁/c, Z = 4, lattice dimensions at –70 °C: a = 1522.9(2); b = 990.3(1); c = 1161.7(1) pm; β = 106.31(1)°, R₁ = 0.0317. [Mo₂Cl₂(μ‐NSN)₂(μ‐O)(NCMe₃)(OCMe₃)₂]₂ · 4 CCl₄: Space group P2₁/c, Z = 2, lattice dimensions at –83 °C: a = 1216.7(1); b = 2193.1(2); c = 1321.8(1) pm; β = 98.23(1)°; R₁ = 0.0507.     

Entrapment of a Pseudo‐Tetrahedral CoII Center by Thioether Sulfur Bound {Co2(μ‐L)} Fragments: Synthesis,Field‐Induced Single‐Ion Magnetism and Catechol Oxidase Mimicking Activity

Simultaneous incorporation of both Co^II and Co^III ions within a new thioether S‐bearing phenol‐based ligand system, H₃L (2,6‐bis‐[{2‐(2‐hydroxyethylthio)ethylimino}methyl]‐4‐methylphenol) formed [Co₅] aggregates [Co^IICo^III₄L₂(μ‐OH)₂(μ_1,3‐O₂CCH₃)₂](ClO₄)₄?H₂O ( 1 ) and [Co^IICo^III₄L₂(μ‐OH)₂(μ_1,3‐O₂CC₂H₅)₂](ClO₄)₄?H₂O ( 2 ). The magnetic studies revealed axial zero‐field splitting (ZFS) parameter, D/hc=?23.6 and ?24.3 cm^?1, and E/D=0.03 and 0.00, respectively for 1 and 2 . Dynamic magnetic data confirmed the complexes as SIMs with U_eff/k_B=30 K ( 1 ) and 33 K ( 2 ), and τ₀=9.1×10^?8 s ( 1 ), and 4.3×10^?8 s ( 2 ). The larger atomic radius of S compared to N gave rise to less variation in the distortion of tetrahedral geometry around central Co^II centers, thus affecting the D and U_eff/k_B values. Theoretical studies also support the experimental findings and reveal the origin of the anisotropy parameters. In solutions, both 1 and 2 which produce {Co^III₂(μ‐L)} units, display solvent‐dependent catechol oxidation behavior toward 3,5‐di‐tert‐butylcatechol in air. The presence of an adjacent Co^III ion tends to assist the electron transfer from the substrate to the metal ion center, enhancing the catalytic oxidation rate.     

A New Domain of Reactivity for High‐Valent Dinuclear [M(μ‐O)2M′] Complexes in Oxidation Reactions

The strikingly different reactivity of a series of homo‐ and heterodinuclear [(M^III)(μ‐O)₂(M^III)′]²⁺ (M=Ni; M′=Fe, Co, Ni and M=M′=Co) complexes with β‐diketiminate ligands in electrophilic and nucleophilic oxidation reactions is reported, and can be correlated to the spectroscopic features of the [(M^III)(μ‐O)₂(M^III)′]²⁺ core. In particular, the unprecedented nucleophilic reactivity of the symmetric [Ni^III(μ‐O)₂Ni^III]²⁺ complex and the decay of the asymmetric [Ni^III(μ‐O)₂Co^III]²⁺ core through aromatic hydroxylation reactions represent a new domain for high‐valent bis(μ‐oxido)dimetal reactivity.     

Ring‐Size‐Modulated Reactivity of Putative Dicobalt‐Bridging Nitrides: C−H Activation versus Phosphinimide Formation

Dicobalt complexes supported by flexible macrocyclic ligands were used to target the generation of the bridging nitrido species [(ⁿ PDI₂)Co₂(μ‐N)(PMe₃)₂]³⁺ (PDI=2,6‐pyridyldiimine; n =2, 3, corresponding to the number of catenated methylene units between imino nitrogen atoms). Depending on the size of the macrocycle and the reaction conditions (solution versus solid‐state), the thermolysis of azide precursors yielded bridging phosphinimido [(²PDI₂)Co₂(μ‐NPMe₃)(PMe₃)₂]³⁺, amido [(ⁿ PDI₂)Co₂(μ‐NH₂)(PMe₃)₂]³⁺ (n =2, 3), and C−H amination [(³PDI₂*‐μ‐NH)Co₂(PMe₃)₂]³⁺ products. All results are consistent with the initial formation of [(ⁿ PDI₂)Co₂(μ‐N)(PMe₃)₂]³⁺, followed by 1) PMe₃ attack on the nitride, 2) net hydrogen‐atom transfer to form N−H bonds, or 3) C−H amination of the alkyl linker of the ⁿ PDI₂ ligand.     

Aktivierung von Schwefelkohlenstoff an Trirutheniumclustern: Synthese und Kristallstruktur von [Ru3(CO)5(μ‐H)2(μ‐PCy2)(μ‐Ph2PCH2PPh2){μ‐η2‐PCy2C(S)}(μ3‐S)] und [Ru3(CO)5(CS)(μ‐H)(μ‐PtBu2)(μ‐PCy2)2(μ3‐S)]

Activation of Carbon Disulfide on Triruthenium Clusters: Synthesis and X‐Ray Crystal Structure Analysis of [Ru₃(CO)₅(μ‐H)₂(μ‐PCy₂)(μ‐Ph₂PCH₂PPh₂){μ‐η²‐PCy₂C(S)}(μ₃‐S)] and [Ru₃(CO)₅(CS)(μ‐H)(μ‐P^tBu₂)(μ‐PCy₂)₂(μ₃‐S)] [Ru₃(CO)₆(μ‐H)₂(μ‐PCy₂)₂(μ‐dppm)] ( 1 ) (dppm = Ph₂PCH₂PPh₂) reacts under mild conditions with CS₂ and yields by oxidative decarbonylation and insertion of CS into one phosphido bridge the opened 50 VE‐cluster [Ru₃(CO)₅(μ‐H)₂(μ‐PCy₂)(μ‐dppm){μ‐η²‐PCy₂C(S)}(μ₃‐S)] ( 2 ) with only two M–M bonds. The compound 2 crystallizes in the triclinic space group P 1 with a = 19.093(3), b = 12.2883(12), c = 20.098(3) Å; α = 84.65(3), β = 77.21(3), γ = 81.87(3)° and V = 2790.7(11) ų. The reaction of [Ru₃(CO)₇(μ‐H)(μ‐P^tBu₂)(μ‐PCy₂)₂] ( 3 ) with CS₂ in refluxing toluene affords the 50 VE‐cluster [Ru₃(CO)₅(CS)(μ‐H)(μ‐P^tBu₂)(μ‐PCy₂)₂(μ₃‐S)] ( 4 ). The compound cristallizes in the monoclinic space group P 2₁/a with a = 19.093(3), b = 12.2883(12), c = 20.098(3) Å; β = 104.223(16)° and V = 4570.9(10) ų. Although in the solid state structure one elongated Ru–Ru bond has been found the complex 4 can be considered by means of the ³¹P‐NMR data as an electron‐rich metal cluster.     

Cobalt(II) and Cobalt(III) Tri‐tert‐butoxysilanethiolates. Synthesis,Properties, Crystal and Molecular Structures of [Co{μ‐SSi(OBut)3}{SSi(OBut)3}(NH3)]2 and [Co{SSi(OBut)3}2(NH3)4][SSi(OBut)3] Complexes

The heteroleptic neutral tri‐tert‐butoxysilanethiolate of cobalt(II) incorporating ammonia as additional ligand ( 1 ) has been prepared by the reaction of a cobalt(II) ammine complex with tri‐tert‐butoxysilanethiol in water. Complex 1 , dissolved in hexane, undergoes oxidation in an ammonia saturated atmosphere to the ionic cobalt(III) compound 2 . Molecular and crystal structures of 1 and 2 have been determined by single crystal X‐ray structural analysis. 1 forms a dimeric molecule [Co{μ‐SSi(OBu^t)₃}{SSi(OBu^t)₃}(NH₃)]₂ with a folded central Co₂S₂ ring and distorted tetrahedral ligand arrangement at both Co^II atoms (CoNS₃ core). The product 2 is composed of the octahedral Co^III complex cation [Co{SSi(OBu^t)₃}₂(NH₃)₄]⁺ and the tri‐tert‐butoxysilanethiolate anion. Within the crystal two pairs of ions interact by hydrogen bonds forming well separated entities. 1 and 2 are the first structurally characterized cobalt thiolates where metal is also bonded to ammonia and 2 is the first cobalt(III) silanethiolate.     

Wolves in Sheep's Clothing: μ‐Oxo‐Diiron Corroles Revisited

For well over 20 years, μ‐oxo‐diiron corroles, first reported by Vogel and co‐workers in the form of μ‐oxo‐bis[(octaethylcorrolato)iron] (Mössbauer δ 0.02 mm s^?1, ΔE_Q 2.35 mm s^?1), have been thought of as comprising a pair antiferromagnetically coupled low‐spin Fe^IV centers. The remarkable stability of these complexes, which can be handled at room temperature and crystallographically analyzed, present a sharp contrast to the fleeting nature of enzymatic, iron(IV)‐oxo intermediates. An array of experimental and theoretical methods have now shown that the iron centers in these complexes are not Fe^IV but intermediate‐spin Fe^III coupled to a corrole^.2?. The intramolecular spin couplings in {Fe[TPC]}₂(μ‐O) were analyzed via DFT(B3LYP) calculations in terms of the Heisenberg–Dirac–van Vleck spin Hamiltonian H=J_Fe–corrole(S_Fe?S_corrole)+J_Fe–Fe′(S_Fe?S_Fe′)+J_{Fe′–corrole}(S_Fe′?S_corrole′), which yielded J_Fe–corrole=J_{Fe′–corrole′}=0.355 eV (2860 cm^?1) and J_Fe–Fe′=0.068 eV (548 cm^?1). The unexpected stability of μ‐oxo‐diiron corroles thus appears to be attributable to charge delocalization via ligand noninnocence.     

Bis(μ‐N,N‐dimethyldithiocarbamato‐κ3S,S′:S′)bis[(dimethoxyphenylphosphane‐κP)(N,N‐dimethyldithiocarbamato‐κ2S,S′)cobalt(III)] bis(hexafluorophosphate)

Purple prismatic crystals of the title compound, [Co₂(C₃H₆NS₂)₄(C₈H₁₁O₂P)₂](PF₆)₂, were obtained by repeated recrystallization of trans‐[Co(C₃H₆NS₂)₂‐(C₈H₁₁O₂P)₂]PF₆ from CH₃CN/Et₂O and then from MeOH/CH₂Cl₂; during recrystallization one of the P(OMe)₂Ph ligands was dissociated from the Co^III center and the resulting Co^III complex fragment underwent dimerization. The complex cation has a dinuclear structure bridged by one S atom of each of two of the N,N‐di­methyl­di­thio­carbamate ligands, and has crystallographically imposed C₂ symmetry. Two P(OMe)₂Ph ligands are coordinated at the transoid positions of the Co₂(μ‐C₃H₆NS₂)₂(C₃H₆NS₂)₂ moiety, with Co—P bond lengths of 2.1921 (11) Å.     

A Rare Tetranuclear Thorium(IV) μ4‐Oxo Cluster and Dinuclear Thorium(IV) Complex Assembled by Carbon–Oxygen Bond Activation of 1,2‐Dimethoxyethane (DME)

The synthesis and X‐ray crystal structure of two new multinuclear thorium complexes are reported. The tetranuclear μ₄‐oxo cluster complex Th₄(μ₄‐O)(μ‐Cl)₂I₆[κ²(O,O’)‐μ‐O(CH₂)₂OCH₃]₆ and the dinuclear complex Th₂I₅[κ²(O,O’)‐μ‐O(CH₂)₂OCH₃]₃(DME) (DME=dimethoxyethane) are formed by C?O bond activation of 1,2‐dimethoxyethane (DME) mediated by thorium iodide complexes.     

The Electron Transfer Series [MoIII(bpy)3]n (n=3+, 2+, 1+, 0, 1−), and the Dinuclear Species [{MoIIICl(Mebpy)2}2(μ2‐O)]Cl2 and [{MoIV(tpy.)2}2(μ2‐MoO4)](PF6)2⋅4 MeCN

The electronic structures of the five members of the electron transfer series [Mo(bpy)₃]ⁿ (n=3+, 2+, 1+, 0, 1?) are determined through a combination of techniques: electro‐ and magnetochemistry, UV/Vis and EPR spectroscopies, and X‐ray crystallography. The mono‐ and dication are prepared and isolated as PF₆ salts for the first time. It is shown that all species contain a central Mo^III ion (4d³). The successive one‐electron reductions/oxidations within the series are all ligand‐based, involving neutral (bpy⁰), the π‐radical anion (bpy^.)^1?, and the diamagnetic dianion (bpy^2?)^2?: [Mo^III(bpy⁰)₃]³⁺ (S=3/2), [Mo^III(bpy^.)(bpy⁰)₂]²⁺ (S=1), [Mo^III(bpy^.)₂(bpy⁰)]¹⁺ (S=1/2), [Mo^III(bpy^.)₃] (S=0), and [Mo^III(bpy^.)₂(bpy^2?)]^1? (S=1/2). The previously described diamagnetic dication “[Mo^II(bpy⁰)₃](BF₄)₂” is proposed to be a diamagnetic dinuclear species [{Mo(bpy)₃}₂(μ₂‐O)](BF₄)₄. Two new polynuclear complexes are prepared and structurally characterized: [{Mo^IIICl(^Mebpy⁰)₂}₂(μ₂‐O)]Cl₂ and [{Mo^IV(tpy^.)₂}₂(μ₂‐Mo^VIO₄)](PF₆)₂?4 MeCN.     

Koordinativ ungesättigte Dirutheniumkomplexe: Synthese und Kristallstrukturen von [Ru2(CO)4(μ‐H)(μ‐S)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)] und [Ru2(CO)4(μ‐X)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)] (X = Cl,S2CH)

Coordinatively Unsaturated Diruthenium Complexes: Synthesis and X‐Ray Crystal Structures of [Ru₂(CO)₄(μ‐H)(μ‐S)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)], [Ru₂(CO)₄(μ‐X)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)] (X = Cl, S₂CH) [Ru₂(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 1 ) reacts in benzene with elemental sulfur to the addition product [Ru₂(CO)₄(μ‐H)(μ‐S)(μ‐P^tBu₂)(μ‐dppm)] ( 2 ) (dppm = Ph₂PCH₂PPh₂). 2 is also obtained by reaction of 1 with ethylene sulfide. The reaction of 1 with carbon disulfide yields with insertion of the CS₂ into the Ru₂(μ‐H) bridge the dithioformato complex [Ru₂(CO)₄(μ‐S₂CH)(μ‐P^tBu₂)(μ‐dppm)] ( 3 ). Furthermore, 1 reacts with [NO][BF₄] to the complex salt [Ru₂(CO)₄(μ‐NO)(μ‐H)(μ‐P^tBu₂)(μ‐dppm)][BF₄] ( 4 ), and reaction of 1 with CCl₄ or CHCl₃ affords spontaneously [Ru₂(CO)₄(μ‐Cl)(μ‐P^tBu₂)(μ‐dppm)] ( 5 ) in nearly quantitative yield. The molecular structures of 2 , 3 and 5 were confirmed by crystal structure analyses.