Butylamide-terminated poly(amidoamine) dendritic gelators

Butylamide-terminated poly(amidoamine) dendrons with either a Boc group (C-n (n = 1, 2, 3)) or a carboxyl group (E-n (n = 1, 2)) at the focal point, as a new kind of dendritic gelators, were synthesized and their gelation properties were studied by TEM, WAXD, SAXS, NMR,and FTIR spectroscopy. It was found that the structure of focal groups impacted greatly on their gelation ability and the dendrons with higher generations facilitated the gel phase assembly. Hydrogen-bonding and hydrophobic interactions were proved to be the main driving forces responsible for the fibrous assembly with the diameter in the range of 30-100 nm. The molecular packing pattern of the xerogels of C-2, C-3, E-1, and E-2 all showed a lamellar structure, which was revealed by WAXD and SAXS.     

Capillary electrophoresis of polycationic poly(amidoamine) dendrimers

Generation 2 to generation 5 poly(amidoamine) (PAMAM) dendrimers having different terminal functionalities were analyzed by capillary electrophoresis (CE). Polyacrylamide gel electrophoresis was also used to assess the composition of the individual generations for comparison with the CE results. Separation of PAMAMs can be accomplished by either using uncoated silica or silanized silica capillaries, although reproducibility is poor using the uncoated silica capillary. To improve run-to-run reproducibility, silanized capillary was used and various internal standards were also tested. Relative and normalized migration times of primary amine terminated PAMAM dendrimers were then determined using 2,3-diaminopyridine (2,3-DAP) as an internal standard. Using silanized capillaries and internal standards, the relative and normalized migration times are fully reproducible and comparable between runs. Apparent dimensionless electrophoretic mobilities were determined and the results were compared to theoretical calculations. It is concluded that for PAMAMs a complex separation mechanism has to be considered in CE, where the movement of the ions is due to the electric field, but the separation is rather the consequence of the adsorption/desorption equilibria on the capillary wall ("electrokinetic capillary chromatography"). The described method may be used for quality control and may serve as an effective technique to analyze polycationic PAMAM dendrimers and their derivatives with different surface modifications.     

Photophysical and self‐assembly behavior of poly(amidoamine) dendrons with chromophore as scaffold: The effect of dendritic architecture

Two series of amphiphiles composed of hydrophilic poly(amidoamine) dendrons (from the first to the third generation) as the shell and hydrophobic aromatic chromophores (3,6‐di(maleimidyl)‐9‐phenyl carbazole and 9‐(4′‐maleimidyl phenyl)‐3‐maleimidyl carbazole) as the central scaffold were synthesized. The effect of dendritic architecture on the photophysical properties and the self‐assembly behavior of these amphiphiles were studied by UV–vis absorption spectroscopy, fluorescence spectroscopy, and transmission electron microscopy (TEM) measurements. Both the generation of dendritic shell and the location of dendrons at the chromophoric scaffold had great effect on the photophysical properties of these amphiphiles. In addition, different spherical aggregates were formed from these amphiphiles in the aqueous solution at different concentrations. Because of the combined effects of steric hindrance and architecture of dendritic shells, the amphiphiles from G2 dendron with central chromophore self‐organized into ordered aggregates more readily than that from G1 and G3. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4584–4593, 2008     

CE of poly(amidoamine) succinamic acid dendrimers using a poly(vinyl alcohol)-coated capillary

Various generations (G1-G8) of negatively charged poly(amidoamine) (PAMAM) succinamic acid dendrimers (PAMAM-SAH) were analyzed by CE using a poly(vinyl alcohol)-coated capillary. Due to its excellent stability and osmotic flow-shielding effect, highly reproducible migration times were achieved for all generations of dendrimer (e.g., RSD for the migration times of G5 dendrimer was 0.6%). We also observed a reverse trend in migration times for the PAMAM-SAH dendrimers (i.e., higher generations migrated faster than lower generation dendrimers) compared to amine-terminated PAMAM dendrimers reported in the literature. This reversal in migration times was attributed to the difference in counterion binding around these negatively charged dendrimers. This reverse trend allowed a generational separation for lower generation (G1-G3) dendrimers. However, a sufficient resolution for the migration peaks of higher generations (G4-G5) in a mixture could not be achieved. This could be due to their nearly identical charge/mass ratio and dense molecular conformations. In addition, we show that dye-functionalized PAMAM-SAH dendrimers can also be analyzed with high reproducibility using this method.     

Synthesis and endosomolytic properties of poly(amidoamine) block copolymers

The poly(amidoamine)s (PAAs) ISA 1 and ISA 23 display pH-dependent conformational change and pH-dependent membrane perturbation. These properties confer potential for use as endosomolytic polymers for intracytoplasmic delivery of toxins and genes. Both polymers are relatively non-toxic, and moreover ISA 23 has the beneficial property in vivo, of being non hepatotropic when administered intravenously. Although ISA 23 and ISA 1 demonstrate ability to transfect cells, ISA 1 is also able to promote intracellular delivery of non-permeant toxins. The aim of this study was to synthesise random and block copolymers of ISA 1 and ISA 23 and investigate whether these second generation hybrids would allow optimisation of PAA biological characteristics. Random and block copolymers of ISA 1 and ISA 23 were synthesised by hydrogen transfer polyaddition to generate a library of PAAs with an ISA 23:ISA 1 molar ratios of 2:1 to 4:1. The resultant polymers have a pI slightly below 7.4 and a M(w) of 19,900-49,000 g/mol and a M(n) of 13,100-24,100 g/mol. Whereas none of the random or block copolymers were haemolytic at pH 7.4 all demonstrated pH-dependent membrane activity. At pH 5.5 they caused 50-60% haemoglobin (Hb) release over 1 h. This was slightly less than that seen for ISA 23 (80% Hb release). None of the copolymers were cytotoxic against B16F10 cells during a 72 h incubation (IC(50) > 2 mg/ml; MTT assay). The ability of the random and block copolymer PAAs to deliver the toxin gelonin was also examined, but only ISA 1 and the block copolymer B2 (ISA 23:ISA 1 at a 2:1 molar ratio) were able to promote intracellular delivery, as measured by cytotoxic activity. It would be interesting to study the body distribution of B2 and determine whether this toxin-delivering PAA is able to escape liver capture.     

Electrophoretic mobility and molecular distribution studies of poly(amidoamine) dendrimers of defined charges

Generation 5 ethylenediamine (EDA)-cored poly(amidoamine) (PAMAM) dendrimers (E5, E denotes the EDA core and 5 the generation number) with different degrees of acetylation and carboxylation were synthesized and used as a model system to investigate the effect of charge and the influence of dendrimer surface modifications on electrophoretic mobility (EM) and molecular distribution. The surface-modified dendrimers were characterized by size-exclusion chromatography, 1H NMR, MALDI-TOF-MS, PAGE, and CE. The focus of our study was to determine how EM changes as a function of particle charge and molecular mass, and how the molecular distribution changes due to surface modifications. We demonstrate that partially modified dendrimers have much broader migration peaks than those of fully surface functionalized or unmodified E5 dendrimers due to variations in the substitution of individual dendrimer surfaces. EM decreased nonlinearly with increases in surface acetylation for both PAMAM acetamides and PAMAM succinamic acids, indicating a complex migration activity in CE separations that is not solely due to charge/mass ratio changes. These studies provide new insights into dendrimer properties under an electric field, as well as into the characterization of dendrimer-based materials being developed for medical applications.     

Cationic poly(amidoamine) dendrimers as additives for capillary electroseparation and detection of proteins

We examine the influence of cationic poly(amidoamine) (PAMAM) dendrimers on capillary electroseparation–UV analysis of proteins. PAMAMs adsorbing to the capillary surface suppressed the wall‐adsorption of proteins; meanwhile, PAMAMs added to the buffer exhibited selectivity toward proteins. Presence of 3×10^?4 g/mL PAMAM generation one (G 1.0) in 30 mM phosphate, at pH 2.6, rendered significant enhancement in separation efficiency; the merged peaks of myoglobin and trypsin inhibitor were separated. Moreover, the protein–dendrimer interactions changed the inherent UV absorbance profiles of proteins. UV–Vis study showed that the absorbance of cytochrome C and transferrin increased at the detection wavelength of 214 nm; their detection sensitivity enhanced by 2.44 and 2.01‐folds, respectively, with addition of 5×10^?4 g/mL PAMAM G 1.0.     

Poly(amidoamine) dendrimers peripherally modified with 1,8-naphthalimides. Photodegradation and photostabilization on polyamide matrix

Some novel fluorescent poly(amidoamine) dendrimers supported by a polyamide-6 matrix have been prepared and studied for the first time. The colour characteristics of the novel materials have been determined and found to be dependent on the nature of 1,8-naphthalimides bonded to their periphery amino groups. The materials have been treated with protons and cuprum cations. The resulting into changes in the colour characteristics and photostability of the dendrimers has been investigated. It has been shown that these ions inhibit the photodegradation of dendrimers molecules studied.     

Structural analysis of poly(amidoamine) dendrimer immobilized in crosslinked poly(ethylene glycol)

Polymeric membranes comprised of poly(amidoamine) (PAMAM) dendrimer immobilized in a poly(ethylene glycol) (PEG) network exhibit an excellent CO₂ separation selectivity over H₂. The CO₂ permeability increases with PAMAM dendrimer concentration in the polymeric membrane and becomes 500 times greater than H₂ permeability when the dendrimer content was 50 wt % at ambient conditions (5 kPa of CO₂ partial pressure). However, the detailed morphology of the membrane has not been discussed. The immiscibility of PAMAM dendrimer and PEG matrix results in phase separation, which takes place in a couple of microns scale. Especially, laser scanning confocal microscope captures a 3D morphology of the polymeric blend. The obtained 3D reconstructions demonstrate a bicontinuous structure of PAMAM dendrimer‐rich and PEG‐rich phases, which indicates the presence of PAMAM dendrimer channel penetrating the polymeric membrane, and CO₂ will preferentially pass through the dendrimer channel. In addition, Fourier transform of the 3D reconstructions indicates the presence of a periodic structure. An average size of the dendrimer domain calculated is 2–4 μm in proportion to PAMAM dendrimer concentration. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Acid‐base properties of poly(amidoamine)s

Polyamidoamines (PAAs) represent a family of degradable polymers carrying tert‐amine groups in the polymer backbone, which behave as polyelectrolytes in aqueous solutions. Many relevant properties of PAAs, including the ability to interact with components of the biological environments, such as nucleic acids, proteins, and living cells, are strongly dependent on their acid‐base properties, hence on their ionization state in different biological districts. In this article, the protonation constants of a series of PAAs have been precisely determined by electrochemical techniques in order to build up a homogeneous library containing both the protonation constants and the average distribution of the charged species, hence the net average charge as a function of pH. Moreover, correlations between chemical and cytotoxicity, have been attempted. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Poly(2-hydroxyethyl acrylate) hydrogels containing hyper-branched poly(amidoamine) for sustained drug release

Hydrogels containing hyper-branched poly(amidoamine) (hb-PAMAM) microenvironments were suggested for the sustained release of ionizable drugs. For this purpose, a series of poly(2-hydroxyethyl acrylate) (PHEA) hydrogels containing hb-PAMAM (PHEA-hb-PAMAM) were prepared by copolymerization of 2-hydroxyethyl acrylate with acryl-terminated hb-PAMAM. The hb-PAMAM was synthesized by the Michael addition reaction of triacryloylhexahydro-1,3,5-triazine (TT) and piperzaine (PZ). By using nonionic Tegafur and ionizable salicylic acid (SA) as model drugs, the release mechanisms of drugs from PHEA-hb-PAMAM hydrogels were investigated. Compared with the release kinetic of Tegafur, the release rate of SA from the hydrogels was evidently slowed down. Moreover, the release rate of SA can be modulated by the addition of salt. This can be attributed to the ionic interaction of SA with hb-PAMAM microenvironments. By analyzing the release kinetics of SA from the hydrogels, it was found that the release of SA followed non-Fickian diffusion.     

Influence on fluorescence properties of hyperbranched poly(amidoamine)s by nano golds

The influence of gold nanoparticles (GNPs) and gold nanodots (GNDs) on fluorescence properties of hyperbranched poly(amidoamine)s (HPAMAMs) which were synthesized by Michael addition of 1‐(2‐aminoethyl) piperazine (AEPZ) and methyl acrylate (MA) was investigated in this study. It was found that GNPs with definite surface plasma absorption can quench the fluorescence of HPAMAMs. With the increasing of the concentration of GNPs, the fluorescence intensity of HPAMAMs decreased correspondingly, and varied linearly at low concentration of GNPs. This phenomenon was owing to the fluorescence resonance energy transfer (FRET) between the HPAMAMs and GNPs. In contrast, the complex with smaller GNDs encapsulated in the interior of the HPAMAMs presented greatly enhanced emission. Those results show that the size of nano golds may be used to adjust the fluorescence properties of HPAMAMs and may extend potential applications of HPAMAMs and GNPs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Self‐assembly of a new class of amphiphilic poly(amidoamine) dendrimers and their electrochemical properties

Amphiphilic poly(amidoamine) (PAMAM) dendrimers consisting of a hydrophilic dendrimer core and hydrophobic aromatic dansyl or 1‐(naphthalenyl)‐2‐phenyldiazene (NPD) shells have been synthesized. These amphiphilic dendrimers from the zero generation to the third generation self‐assemble into vesicular aggregates in water. The self‐assembly behavior of these dendrimers strongly depends on their generations. The generation dependence has been further investigated by an exploration of their electrochemical properties. For the PAMAM–NPD aggregates, the photoisomerization process leads to a change in the aggregate size. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5512–5519, 2005     

Synthesis and characterization of novel poly（aryl ether）s containing naphthyl moieties

Two poly(aryl ether)s containing naphthyl moieties were prepared from bis(3,5-dimethyl-4-hydroxyphenyl)naphthyl methane (monomer 1) via nucleophilic aromatic substitution polycondensation with bis(4-fluorophenyl) ketone and bis(4-fluorophenyl) sulfone.The structures of these polymers were confirmed by ~1H NMR.The M_n values of the two polymers were 96,200 and 88,600, respectively.The polymers exhibited good thermal stabilities with 5%mass loss at T>400℃and high glass-transition temperature(T_g) of T>250℃...     

Facile fabrication of a novel high performance CO2 separation membrane: Immobilization of poly(amidoamine) dendrimers in poly(ethylene glycol) networks

Poly(amidoamine) (PAMAM) dendrimers showed high CO₂ separation properties and were successfully immobilized in a poly(ethylene glycol) (PEG) network upon photopolymerization of PEG dimethacrylate. The PAMAM dendrimer incorporation ratio was readily controlled, and a stable self-standing membrane containing up to 75 wt.% PAMAM dendrimer was obtained. The CO₂ separation properties over smaller H₂ were investigated by changing the PAMAM dendrimer content or generation and CO₂ partial pressure (ΔPCO₂$\mathrm{\Delta }{P}_{\text{C}{\text{O}}_2}$) under atmospheric conditions. Especially, a polymeric membrane containing 50 wt.% PAMAM dendrimer (0th generation) exhibited an excellent CO₂/H₂ selectivity of 500 with CO₂ permeability of 2.74 × 10⁻¹⁴ m³(STP)m/(m² s Pa) or 3.65 × 10³ barrer (1 barrer = 7.5 × 10⁻¹⁸ m³(STP)m/(m² s Pa)) when a mixture gas (CO₂/H₂: 5/95 by vol.) was fed at 25 °C and 100 kPa with 80% relative humidity. This polymeric materials are promising for a novel CO₂ separation membrane.     

Self-assembly and supramolecular transition of poly(amidoamine) dendrons focally modified with aromatic chromophores

Three novel series of amphiphiles based on poly(amidoamine) dendrons (from G1 to G3) and having different aromatic chromophores (Cz I, Cz II, and Py) at the focal point were synthesized and studied for their self-assembly behavior in aqueous solution by using electronic microscopies (i.e., SEM and TEM), UV-vis, fluorescence, IR, and (1)H NMR spectroscopy. It was found that the generation of dendrons affected significantly the self-assembly of these amphiphiles in aqueous solution and the morphological structures of the resulting assemblies depended greatly on the architecture of the focal chromophores. As a result, the first generation of dendrons assembled readily into vesicles at low concentrations. These vesicular structures subsequently fused to form a stable tubular structure. Similar tubular structures could also be directly obtained through self-assembly of these amphiphilic dendrons at high concentrations. X-ray investigations showed that the resulting tubules possessed a lamellar structure. A head-to-head packing model of amphiphilic dendrons in the assemblies was proposed.     

Nanogold-penetrated poly(amidoamine) dendrimer for enzyme-free electrochemical immunoassay of cardiac biomarker using cathodic stripping voltammetric method

Methods based on immunoassays have been developed for cardiac biomarkers, but most involve the low sensitivity and are unsuitable for early disease diagnosis. Herein we design an electrochemical immunoassay for sensitive detection of myoglobin (a cardiac biomarker for acute myocardial infarction) by using nanogold-penetrated poly(amidoamine) dendrimer (AuNP-PAMAM) for signal amplification without the need of natural enzymes. The assay was carried out on the monoclonal mouse anti-myoglobin (capture) antibody-anchored glassy carbon electrode using polyclonal rabbit anti-myoglobin (detection) antibody-labeled AuNP-PAMAM as the signal tag. In the presence of target myoglobin, the sandwiched immunocomplex could be formed between capture antibody and detection antibody. Accompanying AuNP-PAMAM, the carried gold nanoparticles could be directly determined via stripping voltammetric method under acidic conditions. Under optimal conditions, the detectable electrochemical signal increased with the increasing target myoglobin in the sample within a dynamic working range from 0.01 to 500 ng mL⁻¹ with a detection limit of 3.8 pg mL⁻¹. The electrochemical immunoassay also exhibited high specificity and good precision toward target myoglobin. Importantly, our strategy could be applied for quantitative monitoring of myoglobin in human serum specimens, giving well matched results with those obtained from commercialized enzyme-linked immunosorbent assay (ELISA) method.     

SiO2–poly(amidoamine) dendrimer inorganic/organic hybrids

SiO₂–poly(amidoamine) (PAMAM) dendrimer hybrids were synthesized via (1) a Michael addition reaction between the dendrimer and 3‐(trimethoxysilyl) propyl acrylate, (2) the dissolution of the formed compound in methanol, and (3) the mixing of the latter solution with a methanol solution of partly hydrolyzed tetraethylorthosilicate (TEOS) and its casting on a glass substrate. ¹H NMR indicated that in the first step, 77% of the secondary amines were converted into tertiary amines when the fourth‐generation dendrimer was employed and 46% were converted when the second‐generation dendrimer was used. The final SiO₂–PAMAM dendrimer hybrids were obtained via the hydrolysis and condensation of the compound obtained via the Michael addition and the methanol solution of partly hydrolyzed TEOS. The compartmentalized structure of the hybrids due to the compartments of the dendrimers could be controlled by changing the dendrimer and the amount of TEOS. Scanning electron microscopy and transmission electron microscopy micrographs provided information about the structure of the hybrids. Like the PAMAM dendrimer, the SiO₂–PAMAM dendrimer hybrids exhibited a high metal ion complexing capacity because of the presence of the compartments of the dendrimer; they can be, however, much more easily handled, and, as demonstrated by thermogravimetric experiments, have much higher thermal resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1443–1449, 2000     

Synthesis and properties of novel poly(amide-imide)s containing pendent diphenylamino groups

A new dicarboxylic acid, 2,4-bis(N-trimellitoyl)triphenylamine, bearing two preformed imide rings was synthesized from the condensation of 2,4-diaminotriphenylamine and trimellitic anhydride at 1:2 molar ratio. A series of poly(amide-imide)s (PAIs) with inherent viscosities of 0.38-0.66 dl/g were prepared by triphenyl phosphite-activated polycondensation from the diimide-dicarboxylic acid with various aromatic diamines. All the resulting PAIs were readily soluble in a variety of organic solvents and formed strong and tough films via solution casting. These PAIs have useful levels of thermal stability associated with moderately high glass-transition temperatures (259-314 °C) and 10% weight loss temperatures in excess of 530 °C in nitrogen or in air.     

Studies on synthesis and properties of poly(ferrocenyldimethylsilanes) and poly(ferrocenylmethylphenylsilanes)

Poly(ferrocenyldimethylsilane) and poly(ferrocenylmethylphenylsilane) have been prepared via the thermal ring-opening polymerization of the corresponding strained, silicon-bridged ferrocenophanes. It was found that the molecular weights of resultant polymers depend on the polymerization time. Their electrochemical behavior in aqueous electrolytes was investigated by cyclic voltammetry.