Selective metal ion recognition using a fluorescent 1,8-diquinolylnaphthalene-derived sensor in aqueous solution

The use of anti-1,8-bis(2,2′-diisopropyl-4,4′-diquinolyl)naphthalene, 1, for metal ion-selective fluorescence recognition has been investigated. Employing CuCl₂, ZnCl₂, FeCl₂, and FeCl₃ in fluorescence titration experiments of 1 revealed formation of a bluegreen light emitting bimetallic complex. A dramatic red-shift of the fluorescence maximum of 1 and metal ion-selective quenching was observed in the presence of Cu(II), Fe(II), and Fe(III)chlorides in acetonitrile. By contrast, addition of ZnCl₂ was found to result in fluorescence enhancement, whereas Cu(I) did not induce any significant fluorescence change of 1. The sensor was found to undergo highly ion-selective fluorescence quenching in aqueous solution. Screening of main group and transition metal ions showed excellent selectivity for FeCl₃ even in the presence of competing metal ions.     

Selective metal detection in an unsymmetrical 1,3-alternate calix[4]biscrown chemosensor

Calix[4]crown-based chemosensors 1, 2, and reference 3 have been synthesized. The weak fluorescence intensity of 1,5-naphthalene of 1 suggests that the benzene rings of the calix[4]arene as well as the oxygen atoms of the crown-5 ring take part in PET. The complexation of two K⁺ ions by both crown-5 and 1,5-naphthalene-crown-6 loops of 1 caused fluorescence enhancement of the naphthalene unit by CHEF. Pb²⁺ acted as a quenching metal ion.     

Inner-assembly singlet energy transfer in naphthalene-anthracene system linked by 2-ureido-4{1H}-pyrimidinone binding module

Naphthalene-naphthalene, anthracene-anthracene, and naphthalene-anthracene assemblies 1.1, 2.2, and 1.2 linked by 2-ureido-4{1H}-pyrimidinone binding module were synthesized. Fluorescence quenching and lifetime measurements demonstrate that the inner-assembly singlet energy transfer from naphthalene to anthracene in 1.2 occurs with the efficiency of ca. 89% and rate constant of ca. 9.8 × 10⁸ s⁻¹. Föster energy transfer mechanism operates in this energy transfer process.     

FRET-derived ratiometric fluorescence sensor for Cu

New N-(pyrenylmethyl)naphtho-azacrown-5 (1) was synthesized as an ‘On-Off’ fluorescent chemosensor for Cu²⁺. Excited at 240 nm corresponding to the absorption of naphthalene unit (energy donor) of 1, emission at 380 nm from pyrene unit (energy acceptor) is observed, indicating that intramolecular fluorescence resonance energy transfer (FRET-On) occurs in 1. When Cu²⁺ is added to a solution of 1, however, the fluorescence of pyrene is strongly quenched (FRET-Off) whereas that of naphthalene group is revived. Such FRET ‘On-Off’ behavior of 1 is observed only in the case of Cu²⁺ binding, but not for other metal cations. The high selectivity of 1 toward Cu²⁺ can be potentially applied to a new kind of FRET-based chemosensor. The FRET On-Off behavior is supported by computational studies. The calculated molecular orbitals of HOMO and LUMOs suggest the excited-state interactions leading to FRET from naphthalene to pyrene in 1, but no electron density changes in 1·Cu²⁺ complex.     

Fluorescence emission control and switching of oxymethylcrowned spirobenzopyrans by metal ion

Oxymethylcrowned spirobenzopyran 1 and pyrenylspirobenzopyran 2 were synthesized, and fluorescence emission of their corresponding merocyanine form was examined in the presence of metal ions. For 2, fluorescence emission derived from the pyrene moiety was completely quenched by photoinduced electron transfer (PET) of the nitrogen atom when the merocyanine form was not produced, namely, without metal ions. However, when 2 was converted to the merocyanine form by the complexation of its crown ether with a metal ion, fluorescence resonance energy transfer (FRET) from the pyrene to the merocyanine moieties took place to produce fluorescence emission. This result demonstrates that the spirobenzopyran isomerization can function as a fluorescence emission switch. Fluorescence quantum yield measurement for 1 and 2 showed that fluorescence emission depends on the binding metal ion in which the fluorescence quantum yield generally increased with the increase of metal ion radius.     

Optical properties of oligo(2,3-dioxyfunctionalized)naphthalenes

The properties of two series of oligo(2,3-dioxyfunctionalized)naphthalenes which are connected at the 1,4-positions, that is, methoxy derivatives 1-4 and derivatives that possess two pyrene groups on the central scaffolding oxygen functions 5-8, are described. In 1-4, the fluorescence quantum yields increased by about 20-80% as the number of naphthalene units increased. The intramolecular energy transfer quantum yields of 5-8 were around 20% regardless of the number of naphthalene units.     

Synthesis and fluoride-induced chemiluminescent decomposition of bicyclic dioxetanes substituted with a 2-hydroxynaphthyl group

Five bicyclic dioxetanes bearing a 2-hydroxynaphthyl group, 1aA-1eA, were synthesized and their chemiluminescent decomposition was examined by the use of tetrabutylammonium fluoride (TBAF) as a base in DMSO. It was found that these dioxetanes hold completely the ‘odd/even’ relationship between the substitution pattern of hydroxy as a trigger on the naphthalene ring and their chemiluminescent efficiency, and that dioxetane 1aA exhibited chemiluminescence with the highest efficiency among those for the oxynaphthyl-substituted dioxetanes hitherto known. The significant change in chemiluminescent efficiency depending on the substitution pattern was clarified to be attributed to the marked change in singlet-chemiexcitation efficiency for charge-transfer-induced chemiluminescence (CTICL) of 1aA-1eA. In respect of the rate of CTICL-decomposition, ‘odd/even’ relationship was observed for 1aA-1dA.     

Study on fluorescent switching of naphthopyran with carbazole and pyrene dyad immobilized on SBA-15

A naphthopyran-bridge-carbazole dyad (CzNP), which exhibits both fluorescence and photochromism was synthesized. Then the CzNP was grafted into SBA-15-NH₂, with particular focus on how the SBA-15-NH₂ affects the photoswitching fluorescence change properties. A double fluorescence photochromic material, which was prepared by reacting 1-Pyrenecardboxaldehyde(PY-CHO):naphthopyran-carbazole(CzNP)=1:1 (molar ratio) with SBA-15-NH₂ was also synthesized. Naphthopyran in this two systems displayed excellent photochromic performance. The fluorescent emission was modulated between ‘on’ and ‘off’ via the photoisomerization of naphthopyran in high-degree, especially in PY-CzNP-SBA-15-NH₂ (>90%) due to the photoinduced energy transfer from pyrene excimers to the opened-form naphthopyran and the photoinduced electron transfer between carbazoles and the opened-form naphthopyran moiety. Both the fluorescence photoswitching CzNP-SBA-15-NH₂ and PY-CzNP-SBA-15-NH₂ in CH₃CN/H₂O (v/v, 1:1) solution displayed excellent fatigue resistance. The structural characteristics of CzNP-SBA-15-NH₂ and PY-CzNP-SBA-15-NH₂ were measured by FTIR spectra, X-ray diffraction (XRD), and Elemental analysis.     

A novel chromatism switcher with double receptors selectively for Ag in neutral aqueous solution: 4,5-diaminoalkeneamino-N-alkyl-l,8-naphthalimides

Two novel fluorosensors of 4,5-disubstituted-N-alkyl-l,8-naphthalimide derivatives (H1, H2, H3) with double ethylenediamino receptors, double propylenediamino receptors, or one methylpiperazine receptor were synthesized, respectively. Their fluorescence and absorption in the presence or absence of nine metal ions were studied. In the presence of Ag⁺, H1's absorption moved to long wavelength with color change from yellow-green to red, its quenching and red shift in fluorescence were also remarkable. Similarly, H1's fluorescence was also strongly quenched in the presence of Cu²⁺. In addition, H1 and H2 show high pH sensitively. There was 139-folds fluorescence enhancement for H1, 22-folds for H2, and 4-folds for H3 when pH was changed from 8 to 3, respectively.     

Intramolecular charge transfer dual fluorescent sensors from 4-(dialkylamino)benzanilides with metal binding site within electron acceptor

Three fluoroionophores (2a-c) were designed as the intramolecular charge transfer (CT) dual fluorescent sensors for metal cations with metal binding site within the electron acceptor. These sensors were derived from 4-dialkylaminobenzanilides (alkyl=methyl, ethyl, and n-butyl) with the amido phenyl ring being an arm of 15-crown-5 thus bearing binding site for alkaline and alkaline earth metal cations. Compounds 2a-c were expected to have two possible CT channels of opposite direction. The absorption and fluorescence spectra of 2a-c and their crown-ether free model molecules 3a-c in a variety of solvents were recorded. Dual fluorescence was observed with 2a-c and was assigned to the LE and the CT states, respectively. In nonpolar or less polar solvents the CT occurring with 2a-c was identified as that occurred with benzanilides (BA) with the amido anilines being the electron donor (the BA-like CT), while in polar solvents such as acetonitrile (ACN), the CT was still mainly the BA-like. In the presence of alkali and alkaline earth metal cations in ACN, the CT dual fluorescence underwent substantial changes so as increased total quantum yield, red-shifted LE band and enhanced CT to LE intensity ratio. Binding of the metal cations at the 15-crown-5 moiety of 2a-c was shown to turn the CT direction that the dialkylamino group in the binding complexes being the electron donor while the benzo-15-crown-5 moiety now being within the electron acceptor. The occurrence of this CT enhances metal cation binding to 15-crown-5 ether in 2a-c, which was confirmed by the observed higher metal binding constants. Compounds 2a-c as the CT dual fluorescent sensors were shown to operate under the mechanism of the metal cation binding induced switching of the CT character from the BA-like to that occurred with 4-(dimethylamino)benzamides (the DMABA-like). Compounds 2a-c therefore represent successful examples for the CT dual fluorescent sensors for cations with the metal binding site within the electron acceptor and can be employed as sensitive ratiometric fluorescent sensors for metal cations of improved sensing performance.     

Synthesis and evaluation of a novel pyrenyl-appended triazole-based thiacalix[4]arene as a fluorescent sensor for Ag ion

New fluorescent chemosensors 1,3-alternate-1 and 2 with pyrenyl-appended triazole-based on thiacalix[4]arene were synthesized. The fluorescence spectra changes suggested that chemosensors 1 and 2 are highly selective for Ag⁺ over other metal ions by enhancing the monomer emission of pyrene in neutral solution. However, other heavy metal ions, such as Cu²⁺, and Hg²⁺ quench both the monomer and excimer emission of pyrene acutely. The ¹H NMR results indicated that Ag⁺ can be selectively recognized by the triazole moieties on the receptors 1 and 2 together with the ionophoricity cavity formed by the two inverted benzene rings and sulfur atoms of the thiacalix[4]arene.     

Synthesis and molecular structures of dinuclear complexes with 1,2-dihydro-1,2-diphenyl-naphtho[1,8-c,d]1,2-diphosphole as a bridging ligand

A bisphosphine in which a PhP-PPh bond bridges 1,8-positions of naphthalene, 1,2-dihydro-1,2-diphenyl-naphtho[1,8-cd]-1,2-diphosphole (1), was used as a bridging ligand for the preparation of dinuclear group 6 metal complexes. Free trans-1, a more stable isomer having two phenyl groups on phosphorus centers mutually trans with respect to a naphthalene plane, was allowed to react with two equivalents of M(CO)₅(thf) (M = W, Mo, Cr) at room temperature to give dinuclear complexes (OC)₅M(μ-trans-1)M(CO)₅ (M = W (2a), Mo (2b), Cr (2c)). The preparation of the corresponding dinuclear complexes bridged by the cis isomer of 1 was also carried out starting from the free trans-1 in the following way. Mono-nuclear complexes M(trans-1)(CO)₅ (M = W (3a), Mo (3b), Cr (3c)) which had been prepared by a reaction of trans-1 with one equivalent of the corresponding M(CO)₅(thf) (M = W, Mo, Cr) complex, were heated in toluene, wherein a part of the trans-3a-c was converted to their respective cis isomer M(cis-1)(CO)₅. Each cis trans mixture of the mono-nuclear complexes 3a-c was treated with the corresponding M(CO)₅(thf) to give a cis trans mixture of the respective dinuclear complexes 2a-c. The cis isomer of the ditungsten complex 2a was isolated, and its molecular structure was confirmed by X-ray analysis, showing a shorter W?W distance of 5.1661(3) Å than that of 5.8317(2) Å in trans-2a.     

Adenine-based urea receptors in fluorescent recognition of iodide

Adenine-based receptors 1 and 2 are designed and synthesized for selective sensing of iodide over the other halides and carboxylate anions. Both the receptors 1 and 2 use the urea motif for binding carboxylates and halides. Emissions of the naphthalene and the anthracene in 1 and 2, respectively, are monitored in CHCl₃ in detecting the anions. While carboxylates, fluoride, chloride, and bromide increase the emissions of naphthalene and anthracene in both the receptors 1 and 2 during complexation, iodide quenches the emission. Such selective quenching allows iodide to be discriminated from other halides and carboxylate anions.     

Real light emitter in the bioluminescence of the calcium-activated photoproteins aequorin and obelin: light emission from the singlet-excited state of coelenteramide phenolate anion in a contact ion pair

Fluorescence of the phenolate anion (3(O)⁻) and the amide anion (5(N)⁻) of coelenteramide analogues in ion pairs with various counter cations was systematically investigated to elucidate the ionic structure of the light emitter in the bioluminescence of the calcium-activated photoproteins aequorin and obelin. The fluorescent properties of 3(O)⁻ in an ion pair with a conjugate acid of an organic base (BASE-H⁺) were varied depending on the structural variation of the ion pair and the solvent polarity. In particular, the fluorescence of 3(O)⁻ in the ion pair with the conjugate acid of n-butylamine (NBA-H⁺) indicates that the singlet-excited state of 3(O)⁻ (¹3(O)^−∗) and NBA-H⁺ make a contact ion pair in which the fluorescence emission maxima of 3(O)⁻ is sensitive to the solvent polarity and the fluorescence quantum yields of 3(O)⁻ increase in a less polar solvent. The results also confirm that ¹3(O)^−∗ is a twisted intramolecular charge transfer state. By contrast, the fluorescence of 5(N)⁻ in an ion pair depends little on the BASE-H⁺ or the solvent polarity. Based on these results, we conclude that the light emitter in aequorin and obelin bioluminescences is the singlet-excited state of coelenteramide phenolate anion 2(O)⁻ (¹2(O)^−∗) in a contact ion pair with an imidazolium side chain of a histidine residue, which is located at the less polar active sites of the photoproteins. We also propose a mechanism for the bioluminescence reaction, including the chemiexcitation process to give ¹2(O)^−∗.     

Time-resolved fluorescence of α-(9-anthryl)-ω-(1-naphthyl)-oligosilanes: intramolecular electronic energy and charge transfer through π-π and σ-π interactions

The photophysical properties of a series of α,ω-diaryloligosilanes: (9-anthryl)-(SiMe₂)_n-(1-naphthyl) (1-4, and 6), n=1, 2, 3, 4, and 6, were investigated. For n?2, the intramolecular exciplex emission was observed in cyclohexane. For the stationary and the time-resolved fluorescence (TR-FL) measurements, the excitation of the naphthyl moiety showed a very efficient intramolecular energy transfer to the anthryl moiety, thus only fluorescence from the anthryl moiety was observed. In the case of 4 and 6, a charge-transfer (CT) emission was observed in acetonitrile. Then TR-FL of 6 revealed that the intramolecular-energy transfer from the naphthyl to anthryl moieties is faster than the CT.     

Donor-acceptor-donor triads incorporating tetrathiafulvalene and perylene diimide units: synthesis, electrochemical and spectroscopic studies

Three donor-acceptor-donor triads 1-3 consisting of tetrathiafulvalene units attached to perylene diimides by flexible and rigid spacers were synthesized and characterized. UV/vis spectroscopic and cyclic voltammetric results indicate that they all show negligible intramolecular charge transfer interaction in their ground states. As compared to the reference compound 21, triads 1-3 display reduced fluorescence and their fluorescence lifetimes are shortened, which is probably owing to the photoinduced electron transfer interactions between the PI units and TTF units. The different photophysical behaviors between 1 and 2 (and 3) might be due to their difference in the spatial separation of TTF and PI units. It is preliminarily found that the steric hindrance of the groups attached to TTF units can affect their photostability.     

Novel Mg-responsive fluorescent chemosensor based on benzo-15-crown-5 possessing 1-naphthaleneacetamide moiety

A new fluorescent ionophore for Mg²⁺, 4′-(1-naphthaleneacetamido)benzo-15-crown-5 (1), was synthesized, and its complexation behavior in acetonitrile was investigated by means of UV and fluorescence spectrometry. In the absence of a metal ion, the naphthalene moiety showed quite weak fluorescence emission (fluorescence ‘Off’ state). On the other hand, after the addition of Mg²⁺, fluorescence emission from the naphthalene moiety increased (fluorescence ‘On’ state).     

Zirconocene dichloride complexes with a 1,2-naphthylidene bridge as catalysts for the polymerisation of ethylene and propylene

Ansa-zirconocene dichloride complexes containing a 9-fluorenyl group at the 1-position of naphthalene and a 2-indenyl 12, 1-indenyl 13, or cyclopentadienyl 14 group at the 2-position of the naphthalene were synthesised and characterised. The molecular structures of the complexes have been determined by single crystal X-ray diffraction studies. After activation with excess methylalumoxane (MAO), the complexes were used as homogeneous catalysts for the homopolymerisation of ethylene and propylene.     

A new fluorescent sensor for the detection of pyrophosphate based on a tetraphenylethylene moiety

We have developed a new fluorescent sensor 1-2Zn based on a tetraphenylethylene (TPE) moiety for the detection of PPi. This TPE-based chemosensor showed ‘turn-on’ fluorescence emission according to the concentration of PPi. The fluorescence enhancement upon binding of PPi to 1-2Zn resulted from the restriction of intramolecular rotation of phenyl rings in 1-2Zn.     

Synthesis, photophysical and photochemical properties of highly soluble phthalocyanines substituted with four 3,5-dimethylpyrazole-1-methoxy groups

The synthesis and characterization of new peripherally tetra-3,5-dimethylpyrazole-1-methoxy substituted metal-free (4), zinc (5), nickel (6), cobalt (7), copper (8) and lead (9) phthalocyanines are described for the first time in this study. The photophysical (fluorescence quantum yields and fluorescence lifetimes) and photochemical (photodegradation and singlet oxygen quantum yields) properties of metal-free (4), zinc (5) and lead (9) phthalocyanines are studied in dimethylsulfoxide (DMSO). Nickel (6), cobalt (7) and copper (8) phthalocyanines (6-8) did not evaluate for this purpose due to transition metal and paramagnetic behavior of central metals in the phthalocyanine cavity. The fluorescence quenching behavior of metal-free (4), zinc (5) and lead (9) phthalocyanines are also investigated. The fluorescence emissions of these phthalocyanines are effectively quenched by 1,4-benzoquinone in DMSO.