Distinct reaction pathways of peralkylated LnIIAlIII heterobimetallic complexes with substituted phenols

The protonolysis reaction of heterobimetallic peralkylated complexes [Ln(AlR4)2]n (Ln=Sm, Yb; R=Me, Et) with 2 equiv of HOC 6H 2 tBu 2-2,6-Me-4 affords the bis(trialkylaluminum) adducts Ln[(micro-OArtBu,Me)(micro-R)AlR2]2 in good yields. Analogous reactions with the less sterically demanding iPr-substituted phenol result in ligand redistributions and formation of X-ray structurally evidenced Ln[(micro-OAriPr,H) 2AlR2]2 (Ln=Yb, R=Me; Ln=Sm, R=Et), Yb[(micro-OAriPr,H)(micro-Et)AlEt2]2(THF), and [Et2Al(micro-OAriPr,H) 2Yb(micro-Et)2AlEt2]2. The solid-state structures of serendipitous alumoxane complex Sm[(micro-OArtBu,Me)AlEt2OAlEt2(micro-OArtBu,Me)](toluene) and dimeric AlMe 3-adduct complex [(AlMe3)(micro-OArtBu,Me)Sm(micro-OArtBu,Me) 2Sm(micro-OArtBu,Me)(AlMe3)] were also determined by X-ray crystallography. While the former can be discussed as a typical hydrolysis product of Sm[(micro-OArtBu,Me)(micro-Et)AlEt2]2, the latter was isolated from the 1:1 reaction of [Sm(AlEt4)2]n with HOArtBu,Me.     

Application of molybdenum bis(imido) complexes in ethylene dimerisation catalysis

In combination with EtAlCl(2) (Mo : Al = 1 : 15) the imido complexes [MoCl(2)(NR)(NR')(dme)] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (1); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (3); R = R' = Bu(t) (4); dme = 1,2-dimethoxyethane) and [Mo(NHBu(t))(2)(NR)(2)] (R = 2,6-Pr(i)(2)-C(6)H(3) (5); R = Bu(t) (6)) each show moderate TON, activity, and selectivity for the catalytic dimerisation of ethylene, which is influenced by the nature of the imido substituents. In contrast, the productivity of [MoCl(2)(NPh)(2)(dme)] (2) is low and polymerisation is favoured over dimerisation. Catalysis initiated by complexes 1-4 in combination with MeAlCl(2) (Mo : Al = 1 : 15) exhibits a significantly lower productivity. Reaction of complex 5 with EtAlCl(2) (2 equiv.) gives rise to a mixture of products, while addition of MeAlCl(2) affords [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)]. Treatment of 6 with RAlCl(2) (2 equiv.) (R = Me, Et) yields [Mo({μ-N-Bu(t)}AlCl(2))(2)] (7) in both cases. Imido derivatives 1 and 3 react with Me(3)Al and MeAlCl(2) to form the bimetallic complexes [MoMe(2)(N{R}AlMe(2){μ-Cl})(NR')] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (8); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (10)) and [MoMe(2)(N{R}AlCl(2){μ-Cl})(NR')] (R = R' = 2,6-Pr(i)(2)-C(6)H(3) (9); R = 2,6-Pr(i)(2)-C(6)H(3), R' = Bu(t) (11)), respectively. Exposure of complex 8 to five equivalents of thf or PMe(3) affords the adducts [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)(L)] (L = thf (12); L = PMe(3) (13)), while reaction with NEt(3) (5 equiv.) yields [MoMe(2)(N-2,6-Pr(i)(2)-C(6)H(3))(2)]. The molecular structures of complexes 5, 9 and 11 have been determined.     

Reactions of amides with organoaluminum compounds: factors affecting the coordination mode of aluminum amidates

Factors affecting the coordination mode of an amidato group on aluminum will be presented. The reaction of N-tert-butylalkylacetamide ((t)BuNHCR([double bond]O)) with 1.1 molar equiv of Me(3)Al in refluxing hexane affords a pentacoordinated, dimeric compound [Me(2)Al[eta(2)-(t)BuNC(R)(mu(2)-O)]](2) (3, R = p-(t)Bu-C(6)H(4); 4, R = 2,6-F,F-C(6)H(3); 5, R = Me; 6, R = CF(3); 7, R = p-F(3)C-C(6)H(4)). However, in the presence of 2.2 molar equiv of Me(3)Al, N-tert-butyl-4-tert-butylbenzamide ((t)BuNHC(p-(t)Bu-C(6)H(4))([double bond]O in refluxing hexane gives [Me(2)Al[eta(2)-(t)BuNC(p-(t)Bu-C(6)H(4))(mu(2)-O)]AlMe(3)], 8. In contrast, the reaction of R'NHCR' '([double bond]O) with 1 molar equiv of R(3)Al at room temperature produces tetracoordinated, dimeric, eight-membered ring aluminum compounds [R(2)Al[mu,eta(2)-R'NC(R' ')O]](2) (9, R = Me, R' = 2,6-(i)Pr, (i)()Pr-C(6)H(3), R' ' = Ph; 10, R = Me, R' = (i)Bu, R' ' = Ph; 11, R = Et, R' = Bn, R' ' = Ph; 12, R = Me, R' = Ph, R' ' = CF(3); 13, R = Me, R' = Bn, R' ' = CF(3)). On the other hand, 4'-chlorobenzanilide ((p-Cl-C(6)H(4))NHCPh([double bond]O)) reacts with R(3)Al to produce trimeric, twelve-membered ring aluminum compounds [R(2)Al[mu, eta(2)-(p-Cl-C(6)H(4))NC(Ph)O]](3) (14, R = Me; 15, R = Et). Furthermore, the reaction of 2'-methoxybenzanilide with 1 molar equiv of Me(3)Al in hexane yields a dinuclear aluminum complex [Me(2)Al(o-OMe-Ph)NC(Ph)(O)AlMe(3)], 16.     

Aluminum complexes incorporating bidentate amido phosphine ligands

A series of aluminum complexes supported by o-phenylene-derived amido phosphine ligands, N-(2-diphenylphosphinophenyl)-2,6-dimethylanilide ([Me-NP]-) and N-(2-diphenylphosphinophenyl)-2,6-diisopropylanilide ([iPr-NP]-), have been prepared. The reactions of trialkylaluminum with H[Me-NP] and H[iPr-NP], respectively, in refluxing toluene produced the corresponding dialkyl complexes [Me-NP]AlR(2) and [iPr-NP]AlR(2) (R = Me, Et). Deprotonation of H[Me-NP] with n-BuLi in THF at -35 degrees C followed by addition of AlCl(3) in toluene at -35 degrees C afforded [Me-NP]AlCl(2), which was subsequently reacted with 2 equiv of trimethylsilylmethyllithium in toluene to give [Me-NP]Al(CH(2)SiMe(3))(2). The aluminum complexes were all characterized by (1)H, (13)C, (31)P, and (27)Al NMR spectroscopy. The solid-state structures of monomeric, four-coordinate [Me-NP]AlEt(2) and [iPr-NP]AlMe(2) and five-coordinate [Me-NP]AlCl(2)(THF) were determined by X-ray crystallography. The (1)H NMR studies of [Me-NP]AlEt(2), [Me-NP]Al(CH(2)SiMe(3))(2), and [iPr-NP]AlEt(2) indicate diastereotopic alpha-hydrogen atoms in these molecules. Heteronuclear COSY and NOE experiments suggest that the phosphorus donor in [Me-NP]Al(CH(2)SiMe(3))(2) and [iPr-NP]AlEt(2) is coupled to only one of the diastereotopic alpha-hydrogen atoms that is virtually antiperiplanar with respect to the phosphorus atom.     

Syntheses and characterization of mu,eta(1),eta(1)-3,5-di-tert-butylpyrazolato derivatives of aluminum

The 3,5-di-tert-butylpyrazolato (3,5-tBu(2)pz) derivatives of aluminum [(eta(1),eta(1)-3,5-tBu(2)pz)(mu-Al)R(1)R(2)](2) (R(1) = R(2) = Me 1; R(1) = R(2) = Et, 2; R(1) = R(2) = Cl, 3; R(1) = R(2) = I, 4; [(eta(2)-3,5-tBu(2)pz)(3)Al], 5; [Al(2)(eta(1),eta(1)-3,5-tBu(2)pz)(2)(mu-E)(C triple bond CPh)(2)] (E = S (6), Se (7), Te (8)) have been prepared in good yield. Compounds 1 and 2 were obtained by the reactions of H[3,5-tBu(2)pz] with Me(3)Al and Et(3)Al, respectively. Reaction of [(eta(1),eta(1)-3,5-tBu(2)pz)(mu-Al)H(2)](2) with the pyrazole H[3,5-tBu(2)pz] gave [(eta(2)-3,5-tBu(2)pz)(3)Al] (5). The reaction of [(eta(1),eta(1)-3,5-tBu(2)pz)(mu-Al)R(2)](2) (R = H, Me) and I(2) yielded 4, while the reaction of 1 equiv of K[3,5-tBu(2)pz] and AlCl(3) afforded 3. In addition, the reaction of [Al(2)(eta(1),eta(1)-3,5-tBu(2)pz)(2)(mu-E)H(2)] and HC triple bond CPh gave 6, 7, and 8. All compounds have been characterized by elemental analysis, NMR, and mass spectroscopy. The molecular structure analyses of compounds 1, 3, 6, and 7 by X-ray crystallography showed that complexes 1 and 3 are dimeric with two eta(1),eta(1)-pyrazolato groups in twisted conformation while 6 and 7 with two eta(1),eta(1)-pyrazolato groups display a boat conformation.     

Arene-mercury complexes stabilized aluminum and gallium chloride: synthesis and structural characterization.

Reaction of HgCl(2) with 2 equiv of MCl(3) in an aromatic solvent yields Hg(arene)(2)(MCl(4))(2) where, arene = C(6)H(5)Me, M = Al (1), Ga (2); arene = C(6)H(5)Et, M = Al (3) and Ga (4); o-C(6)H(4)Me(2), M = Al (5), Ga (6); C(6)H(3)-1,2,3-Me(3), M = Al (7) and Ga (8). The solid-state structures of compounds 1-5 and 7 have been determined by X-ray crystallography. In the solid state, compounds 1-4 and 7 exist as neutral complexes in which two arenes are bound to the mercury, and the MCl(3) groups are bound through bridging chlorides to the mercury; compound 5 exists as a cation-anion pair [Hg(o-C(6)H(4)Me(2))(2)(AlCl(4))][AlCl(4)]. However, in solution compounds 1-8 all exist as neutral complexes. The structures of Hg(arene)(2)(AlCl(4))(2) and [Hg(arene)(2)(AlCl(4))](+) have been determined by DFT calculations [B3LYP level] to facilitate the assignment of the (13)C CPMAS NMR spectra and are in good agreement with the X-ray diffraction structures of compounds 1 and 5. Reaction of HgCl(2) with MCl(3) in benzene, m-xylene, and p-xylene results in the formation of liquid clathrates whose spectroscopic characterization is consistent with ionic structures, [Hg(arene)(2)(MCl(4))][MCl(4)]. The calculated energy difference between Hg(C(6)H(5)Me)(2)(AlCl(4))(2) and [Hg(C(6)H(5)Me)(2)(AlCl(4))][AlCl(4)] is discussed with respect to the structure of compound 5 in the solid state versus solution state and the proposed speciation in the liquid clathrates.     

Amidoximes provide facile platinum(II)-mediated oxime-nitrile coupling

The nucleophilic addition of amidoximes R'C(NH(2))═NOH [R' = Me (2.Me), Ph (2.Ph)] to coordinated nitriles in the platinum(II) complexes trans-[PtCl(2)(RCN)(2)] [R = Et (1t.Et), Ph (1t.Ph), NMe(2) (1t.NMe(2))] and cis-[PtCl(2)(RCN)(2)] [R = Et (1c.Et), Ph (1c.Ph), NMe(2) (1c.NMe(2))] proceeds in a 1:1 molar ratio and leads to the monoaddition products trans-[PtCl(RCN){HN═C(R)ONC(R')NH(2)}]Cl [R = NMe(2); R' = Me ([3a]Cl), Ph ([3b]Cl)], cis-[PtCl(2){HN═C(R)ONC(R')NH(2)}] [R = NMe(2); R' = Me (4a), Ph (4b)], and trans/cis-[PtCl(2)(RCN){HN═C(R)ONC(R')NH(2)}] [R = Et; R' = Me (5a, 6a), Ph (5b, 6b); R = Ph; R' = Me (5c, 6c), Ph (5d, 6d), correspondingly]. If the nucleophilic addition proceeds in a 2:1 molar ratio, the reaction gives the bisaddition species trans/cis-[Pt{HN═C(R)ONC(R')NH(2)}(2)]Cl(2) [R = NMe(2); R' = Me ([7a]Cl(2), [8a]Cl(2)), Ph ([7b]Cl(2), [8b]Cl(2))] and trans/cis-[PtCl(2){HN═C(R)ONC(R')NH(2)}(2)] [R = Et; R' = Me (10a), Ph (9b, 10b); R = Ph; R' = Me (9c, 10c), Ph (9d, 10d), respectively]. The reaction of 1 equiv of the corresponding amidoxime and each of [3a]Cl, [3b]Cl, 5b-5d, and 6a-6d leads to [7a]Cl(2), [7b]Cl(2), 9b-9d, and 10a-10d. Open-chain bisaddition species 9b-9d and 10a-10d were transformed to corresponding chelated bisaddition complexes [7d](2+)-[7f](2+) and [8c](2+)-[8f](2+) by the addition of 2 equiv AgNO(3). All of the complexes synthesized bear nitrogen-bound O-iminoacylated amidoxime groups. The obtained complexes were characterized by elemental analyses, high-resolution ESI-MS, IR, and (1)H NMR techniques, while 4a, 4b, 5b, 6d, [7b](Cl)(2), [7d](SO(3)CF(3))(2), [8b](Cl)(2), [8f](NO(3))(2), 9b, and 10b were also characterized by single-crystal X-ray diffraction.     

Regioselective, stereoselective, and conformationally controlled synthesis of (η4-tetraarylcyclobutadiene)(η5-carbomethoxycyclopentadienyl)cobalt metallocenes

The Friedel-Crafts reaction of (η(4)-tetraphenylcyclobutadiene)(η(5)-carbomethoxycyclopentadienyl)cobalt with acid chlorides/aluminum chloride resulted exclusively in para-phenyl acylation. Both monoacylated (1.1 equiv of RCOCl/AlCl(3)) and tetraacylated products (>4 equiv of RCOCl/AlCl(3)) were synthesized. Reaction of PhCC(o-RC(6)H(4)) (R = Me, i-Pr) with Na(C(5)H(4)CO(2)Me) and CoCl(PPh(3))(3) gave predominantly (η(4)-1,3-diaryl-2,4-diphenylcyclobutadiene)(η(5)-carbomethoxycyclopentadienyl)cobalt metallocenes (1,3-[trans] vs 1,2-[cis] selectivity up to 6:1). Conformational control of Friedel-Crafts reactions on the major isomers gave exclusively para-acylation of the unsubstituted phenyl groups.     

Halide Effects in the Formation of Four-Coordinate, Cationic Aluminum

This work was conducted as part of a broad-based effort to determine the factors that affect cation formation for organometallic aluminum complexes. In this study the adduct species R(2)AlX.NH(2)(t)Bu (R, X: Me, F (1); Me, Cl (2); Et, Cl (3); Me, Br (4)) and cationic complexes [R(2)Al(NH(2)(t)Bu)(2)]X (R, X: Me, Br (5); Et, Br (6); Me, I (7)) were examined. These complexes demonstrate that the reaction of R(2)AlX with excess NH(2)(t)Bu produces cationic complexes only when X = Br or I. All of the compounds were characterized by melting points, (1)H NMR, IR, elemental analyses, and, in some cases, X-ray crystallography. X-ray data: 2, triclinic, P&onemacr;, a = 6.277(3) ?, b = 8.990(3) ?, c = 10.393(3) ?, alpha = 71.97(1) degrees, beta = 80.25(3) degrees, gamma = 81.97(3) degrees, V = 547.0(4) ?(3), Z = 2, 1032 reflections with F > 4.0 sigma(F), R = 0.0520; 5, monoclinic, P2(1)/c, a = 9.099(1) ?, b = 10.292(1) ?, c = 17.255(2) ?, beta = 104.81(1) degrees, V = 1562.1(3) ?(3), Z = 4, 1464 reflections with F > 4.0 sigmaF, R = 0.0387; 6, monoclinic, P2(1)/c, a = 14.122(2) ?, b = 13.539(2) ?, c = 21.089(2) ?, beta = 107.73(1) degrees, V = 3841.2(9) ?(3), Z = 4, 781 reflections with F > 5.0 sigmaF, R = 0.0873; 7, monoclinic, P2(1)/n, a = 9.071(1) ?, b = 10.529(1) ?, c = 17.714(2) ?, beta = 103.67(1) degrees, V = 1644.0(3) ?(3), Z = 4, 1723 reflections with F > 4.0 sigmaF, R = 0.0451.     

Tetranuclear manganese complexes with dimer-of-dimer and ladder structures from the use of a bis-bipyridyl ligand

The reaction of the bis-chelating ligand 1,2-bis(2,2'-bipyridine-6-yl)ethane (L) with the trinuclear species of formula [Mn(3)O(O(2)CR)(6)(py)(3)](ClO(4)) (R = Me (1); R = Et (2); R = Ph (3)) has afforded the new tetranuclear mixed-valent complexes [Mn(4)O(2)(O(2)CR)(4)L(2)](ClO(4))(2) (R = Me (4); R = Et (5); R = Ph (6)) and [Mn(4)O(2)(OMe)(3)(O(2)CR)(2)L(2)(MeOH)](ClO(4))(2) (R = Me (7); R = Et (8); R = Ph (9)). Complexes 4-6 were obtained in yields of 20%, 44%, and 37%, respectively. They are mixed-valent, with an average Mn oxidation state of +2.5. Complexes 7-9 were obtained in yields of 57%, 65%, and 70%, respectively. They are also mixed-valent, but with an average Mn oxidation state of +2.75. Complexes 4 x 2THF and 9 x 3MeOH x H(2)O crystallize in the triclinic space group P1 macro and contain [Mn(4)(mu(3)-O)(2)](6+) and [Mn(4)(mu(3)-O)(2)(mu-OMe)(2)](5+) cores, respectively, the latter being a new structural type in the family of Mn(4) complexes. Reactivity studies of 4-9 have shown that 4-6 can be converted into 7-9, respectively, and vice versa. The magnetic properties of 5 and 9 have been studied by dc and ac magnetic susceptibility techniques. Complex 5 displays antiferromagnetic coupling between its Mn ions resulting in a spin ground state of S = 0. Complex 9 also displays antiferromagnetic coupling, but the resulting ground state is S = (7)/(2), as confirmed by fitting magnetization versus field data collected for 9 at low temperatures, which gave S = (7)/(2), D = -0.77 cm(-1), and g = 1.79. Complex 9 exhibits a frequency-dependent out-of-phase ac susceptibility peak, indicative of the slow magnetization relaxation that is diagnostic of single-molecule magnetism behavior.     

New Routes to Synthetically Useful, Sterically Encumbered Arylaluminum Halides and Hydride Halides

The synthesis and structural characterization of the compounds MesAlCl(2)(THF) (1), MesAlCl(2) (2), MesAl(H)Cl(THF) (3a), MesAl(H)Cl (4a), and (MesAlH(2))(2) (5) (Mes = 2,4,6-t-Bu(3)C(6)H(2)(-)) are described as well as those for two compounds 3b and 4b that are analogs of 3a and 4a but have H:Cl ratios that are less than 1:1. All compounds were characterized by (1)H, (13)C NMR, and IR spectroscopy, and 1, 2, 3a, and 4b were additionally characterized by X-ray crystallography. Compound 1 is best synthesized by the reaction of [(THF)(2)LiH(3)AlMes](2) (6) with 6 equiv of Me(3)SiCl. A more conventional route involving the addition of (THF)(2)LiMes to 2 equiv of AlCl(3) in toluene usually affords a mixture of 1 and AlCl(3).THF. Recrystallization of 1 from n-hexane results in a species that has less than 1 equiv of THF per MesAlCl(2). The THF free complex 2 may be obtained in quantitative yield by heating 1 for 20 min at 90 degrees C under reduced pressure. Compound 3a may be obtained by treating a 1:1 mixture of MesLi(THF)(2) and LiAlH(4) with 2 equiv of Me(3)SiCl or by the addition of slightly less than 4 equiv of Me(3)SiCl to 6. The THF can be removed from 3a by sublimation to give 4a. The related compounds 3b and 4b, which display an aluminum-bound H:Cl ratio that is deficient in H, can be obtained by reactions with slightly more than 2 equiv of Me(3)SiCl. Crystal data at 130 K with Cu Kalpha (lambda = 1.541 78 ?) radiation: 1, C(22)H(37)AlCl(2)O, a = 11.889(3) ?, b = 9.992(3) ?, c = 19.704(5) ?, orthorhombic, space group Pca2(1), Z = 4, R = 0.068 for 1556 (I > 2sigma(I)) data; 2, C(18)H(29)AlCl(2), a = 12.147(5) ?, b = 18.042(6) ?, c = 17.771(7) ?, beta = 95.77(3) degrees, monoclinic, space group P2(1)/n,Z = 8, R = 0.032 for 4610 (I > 2sigma(I)) data; 3a, C(22)H(38)AlClO, a = 16.887(7) ?, b = 16.333(6) ?, c = 8.739(3) ?, beta = 101.41(3) degrees, monoclinic, space group P2(1)/c, Z = 4, R = 0.073 for 2752 (I > 2sigma(I)) data; 4b, C(18)H(29.64)AlCl(1.36), a = 12.077(3) ?, b = 17.920(3) ?, c = 17.634(5) ?; beta = 95.21(2) ?, monoclinic, space group P2(1)/n,Z = 8, R = 0.070 for 4261 (I > 2sigma(I)) data.     

A Route to 1,2,4-oxadiazoles and their complexes via platinum-mediated 1,3-dipolar cycloaddition of nitrile oxides to organonitriles

A significant activation of the Ctbd1;N group in organonitriles upon their coordination to a platinum(IV) center has been found in the reaction of [PtCl(4)(RCN)(2)] (R = Me, Et, CH(2)Ph) with the nitrile oxides 2,4,6-R'(3)C(6)H(2)CNO (R' = Me, OMe) to give the (1,2,4-oxadiazole)platinum(IV) complexes (R = Me, R' = Me (1); R = Et, R' = Me (2); R = Et, R' = OMe (3); R = CH(2)Ph, R' = Me (4)); the [2 + 3] cycloaddition was performed under mild conditions (unless poor solubility of [PtCl(4)(RCN)(2)] precludes the reaction) starting even from complexed acetonitrile and propionitrile, which exhibit low reactivity in the free state. The reaction between complexes 2-4 and 1 equiv of Ph(3)P=CHCO(2)Me in CH(2)Cl(2) leads to the appropriate platinum(II) complexes (5-7); the reduction failed only in the case of 1 insofar as this complex is insoluble in the most common organic solvents. All the platinum compounds were characterized by elemental analyses, FAB mass spectrometry, and IR and (1)H, (13)C((1)H), and (195)Pt NMR spectroscopies, and three of them also by X-ray crystallography. The oxadiazoles formed in the course of the metal-mediated reaction were liberated almost quantitatively from their Pt(IV) complexes by reaction of the latter (complexes 2-4) with an excess of pyridine in chloroform, giving free 1,2,4-oxadiazoles and trans-[PtCl(4)(pyridine)(2)]; the sequence of the Pt(IV)-mediated [2 + 3] cycloaddition and the liberation opens up an alternative route for the preparation of this important class of heterocycles.     

Lithium aluminates on a molecular titanium oxide

Lithium aluminates Li[Al(O-2,6-Me(2)C(6)H(3))R'(3)] (R' = Et, Ph) react with the μ(3)-alkylidyne oxoderivative ligands [{Ti(η(5)-C(5)Me(5))(μ-O)}(3)(μ(3)-CR)] [R = H (1), Me (2)] to afford the aluminum-lithium-titanium cubane complexes [{R'(3)Al(μ-O-2,6-Me(2)C(6)H(3))Li}(μ(3)-O)(3){Ti(η(5)-C(5)Me(5))}(3)(μ(3)-CR)] [R = H, R' = Et (5), Ph (7); R = Me, R' = Et (6), Ph (8)]. Complex 7 evolves with the formation of a lithium dicubane species and a Li{Al(μ-O-2,6-Me(2)C(6)H(3))Ph(3)}(2)] unit.     

Synthesis, structures and reactivity of group 4 hydrazido complexes supported by calix[4]arene ligands

Reaction of TiCl(2)(Me(2)Calix) with 2 equiv of LiNHNRR' afforded the corresponding terminal hydrazido(2-) complexes Ti(NNRR')(Me(2)Calix) (R = Ph, R' = Ph (1) or Me; R = R' = Me (3)) which were all structurally characterized. The X-ray structure of Ph(2)NNH(2) is reported for comparison. Compound 1 was also prepared from Na(2)[Me(2)Calix] and Ti(NNPh(2))Cl(2)(py)(3). Reaction of ZrCl(2)(Me(2)Calix) with 2 equiv of LiNHNR(2) afforded only the bis(hydrazido(1-)) complexes Zr(NHNR(2))(2)(Me(2)Calix) (R = Ph or Me). Treatment of Ti(NNMe(2))(Me(2)Calix) (3) with MeI gave the zwitterionic hydrazidium species Ti(NNMe(3))(MeCalix) (6) via a net isomerization reaction which was found to be catalytic in MeI. The corresponding reaction of 3 with CD(3)I gave Ti(NNMe(2)CD(3))(MeCalix) (6-d(3)) with concomitant elimination of MeI. Reaction of 3 with 1 equiv of MeOTf gave [Ti(NNMe(3))(Me(2)Calix)][OTf] (7-OTf) which in turn reacted with (n)Bu(4)NI to form 6 and MeI. Addition of PhCHO to 3 gave the mu-oxo dimer [Ti(mu-O)(Me(2)Calix)](2) and benzaldehyde-dimethylhydrazone. Reaction of either 3 or 6 with (t)BuNCO gave the zwitterionic species Ti{(t)BuNC(NNMe(3))O}(MeCalix) (10) which has been crystallographically characterized. Compound 10 is the formal product of insertion of an isocyanate into the Ti=N(alpha) bond of a titanium hydrazide or hydrazidium species (Me(2)Calix or MeCalix = dianion or trianion of the di- or monomethyl ether of p-tert-butyl calix[4]arene, respectively).     

Mixed Bis(μ-silylene) and (μ-Silylene)/(μ-Germylene) Complexes Involving the Rh/Ir Metal Combination: Nature of the Si···Si Interactions in the Bis(μ-silylene) Species

A series of mixed bis(μ-silylene) complexes of rhodium and iridium [RhIr(CO)(2)(μ-SiHR)(μ-SiR(1)R(2))(dppm)(2)] (R = R(1) = R(2) = Ph (4); R = R(1) = Ph, R(2) = Cl (5); R = R(1) = Ph, R(2) = Me (6); R = 3,5-C(6)H(3)F(2), R(1) = Ph, R(2) = Me (7); R = 3,5-C(6)H(3)F(2), R(1) = 2,4,6-C(6)H(2)Me(3), R(2) = H (8)) have been synthesized by the reaction of the silylene-bridged dihydride complexes, [RhIr(H)(2)(CO)(2)(μ-SiHR)(dppm)(2)] (1, R = Ph; 2, R = C(6)H(3)F(2)), with a number of secondary or primary silanes (Ph(2)SiH(2), PhClSiH(2), PhMeSiH(2), C(6)H(2)Me(3)SiH(3)). The influence of substituents and π-stacking interactions on the Si···Si distance (determined by X-ray crystallography) in this series and the implications regarding the nature of the Si···Si interactions are discussed. A series of novel (μ-silylene)/(μ-germylene) complexes, [RhIr(CO)(2)(μ-SiHPh)(μ-GePh(2))(dppm)(2)] (9) and [RhIr(CO)(2)(μ-SiR(1)R(2))(μ-GeHPh)(dppm)(2)] (R(1) = Ph, R(2) = H (11); R(1) = R(2) = Ph (12); R(1) = Ph, R(2) = Me (13)), have also been synthesized by reaction of the silylene-bridged dihydride complex, [RhIr(H)(2)(CO)(2)(μ-SiHPh)(dppm)(2)] (1), with 1 equiv of diphenylgermane and by reaction of the germylene-bridged dihydride complex, [RhIr(H)(2)(CO)(2)(μ-GeHPh)(dppm)(2)] (3), with 1 equiv of the respective silanes. These complexes have been characterized by multinuclear NMR spectroscopy and X-ray crystallography.     

Substituent effects on indium-phosphorus bonding in (4-RC6H4S)3In.PR'3 adducts (R = H, Me, F; R' = Et, Cy, Ph): a spectroscopic, structural, and thermal decomposition study

The tris(arylthiolate)indium(III) complexes (4-RC(6)H(4)S)(3)In [R = H (5), Me (6), F (7)] were prepared from the 2:3 reaction of elemental indium and the corresponding aryl disulfide in methanol. Reaction of 5-7 with 2 equiv of the appropriate triorganylphosphine in benzene or toluene resulted in isolation of the indium-phosphine adduct series (4-RC(6)H(4)S)(3)In.PR'(3) [R = H, R' = Et (5a), Cy (5b), Ph (5c); R = Me, R' = Et (6a), Cy (6b), Ph (6c); R = F, R' = Et (7a), Cy (7b), Ph (7c)]. These compounds were characterized via elemental analysis, FT-IR, FT-Raman, solution (1)H, (13)C{(1)H}, (31)P{(1)H}, and (19)F (7a-c) NMR spectroscopy, and X-ray crystallography (5c, 6a, 6c, and 7a). NMR spectra show retention of the In-P bond in benzene-d(6) solution, with phosphine (31)P{(1)H} signals shifted downfield compared to the uncoordinated ligand. The X-ray structures show monomeric 1:1 adduct complexes in all cases. The In-P bond distance [2.5863(5)-2.6493(12) A] is influenced significantly by the phosphine substituents but is unaffected by the substituted phenylthiolate ligand. Relatively low melting points (88-130 degrees C) are observed for all adducts, while high-temperature thermal decomposition is observed for the indium thiolate reactants 5-7. DSC/TGA and EI-MS data show a two-step thermal decomposition process, involving an initial loss of the phosphine moiety followed by loss of thiolate ligand.     

Syntheses, structures, and reactivity of new pentamethylcyclopentadienyl-rhodium(III) and -iridium(III) 4-acyl-5-pyrazolonate complexes

New [CpM(Q)Cl] complexes (M = Rh or Ir, Cp = pentamethylcyclopentadienyl, HQ = 1-phenyl-3-methyl-4R(C=O)-pyrazol-5-one in general, in detail HQ(Me), R = CH(3); HQ(Et), R = CH(2)CH(3); HQ(Piv), R = CH(2)-C(CH(3))(3); HQ(Bn), R = CH(2)-(C(6)H(5)); HQ(S), R = CH-(C(6)H(5))(2)) have been synthesized from the reaction of [CpMCl(2)](2) with the sodium salt, NaQ, of the appropriate HQ proligand. Crystal structure determinations for a representative selection of these [CpM(Q)Cl] compounds show a pseudo-octahedral metal environment with the Q ligand bonded in the O,O'-chelating form. In each case, two enantiomers (S(M)) and (R(M)) arise, differing only in the metal chirality. The reaction of [CpRh(Q(Bn))Cl] with MgCH(3)Br produces only halide exchange with the formation of [CpRh(Q(Bn))Br]. The [CpRh(Q)Cl] complexes react with PPh(3) in dichloromethane yielding the adducts CpRh(Q)Cl/PPh(3) (1:1) which exist in solution in two different isomeric forms. The interaction of [CpRh(Q(Me))Cl] with AgNO(3) in MeCN allows generation of [CpRh(Q(Me))(MeCN)]NO(3).3H(2)O, whereas the reaction of [CpRh(Q(Me))Cl] with AgClO(4) in the same solvent yields both [CpRh(Q(Me))(H(2)O)]ClO(4) and [CpRh(Cl)(H(2)O)(2)]ClO(4); the H(2)O molecules derive from the not-rigorously anhydrous solvents or silver salts.     

Synthesis, structures, and reactivity of yttrium alkyl and alkynyl complexes with mixed Tp(Me2)/Cp ligands

The structurally characterized Tp(Me2)-supported rare earth metal monoalkyl complex (Tp(Me2))CpYCH(2)Ph(THF) (1) was synthesized via the salt-metathesis reaction of (Tp(Me2))CpYCl(THF) with KCH(2)Ph in THF at room temperature. Treatment of 1 with 1 equiv of PhC≡CH under the same conditions afforded the corresponding alkynyl complex (Tp(Me2))CpYC≡CPh(THF) (2). Complex 1 exhibits high activity toward carbodiimides, isocyanate, isothiocyanate, and CS(2); treatment of 1 with such substrates led to the formation of a series of the corresponding Y-C(benzyl) σ-bond insertion products (Tp(Me2))CpY[(RN)(2)CCH(2)Ph] (R = (i)Pr(3a), Cy(3b), 2,6-(i)Pr-C(6)H(3)(3c)), (Tp(Me2))CpY[SC(CH(2)Ph)NPh] (4), (Tp(Me2))CpY[OC(CH(2)Ph)NPh] (5), and (Tp(Me2))CpY(S(2)CCH(2)Ph) (6) in 40-70% isolated yields. Carbodiimides and isothiocyanate can also insert into the Y-C(alkynyl) σ bond of 2 to yield complexes (Tp(Me2))CpY[(RN)(2)CC≡CPh] (R = (i)Pr(7a), Cy(7b)) and (Tp(Me2))CpY[SC(C≡CPh)NPh] (9). Further investigation results indicated that 1 can effectively catalyze the cross-coupling reactions of phenylacetylene with carbodiimides. However, treatment of o-allylaniline with a catalytic amount of 1 gave only the benzyl abstraction product (Tp(Me2))CpY(NHC(6)H(4)CH(2)CH═CH(2)-o)(THF) (10), without observation of the expected organic hydroamination/cyclization product. All of these new complexes were characterized by elemental analysis and spectroscopic properties, and their solid-state structures were also confirmed by single-crystal X-ray diffraction analysis.     

Synthesis and calorimetric, spectroscopic, and structural characterization of isocyanide complexes of trialkylaluminum and tri-tert-butylgallium

Addition of tert-butylisocyanide or 2,6-dimethylphenylisocyanide to a solution of trialkylaluminum or trialkylgallium results in formation of complexes R(3)M·C≡N(t)Bu (M = Al, R = Me (1), Et (2), (i)Bu (3), (t)Bu (4); M = Ga, R = (t)Bu (9)) or R(3)M·C≡N(2,6-Me(2)C(6)H(3)) (M = Al, R = Me (5), Et (6), (i)Bu (7), (t)Bu (8); M = Ga, R = (t)Bu (10)), respectively. Complexes 1, 4, 5, and 8-10 are isolated as solids, whereas the triethylaluminum and triisobutylaluminum adducts 2, 3, 6, and 7 are viscous oils. Complexes 1-10 were characterized by NMR ((1)H, (13)C) and IR spectroscopies, and the molecular structures of 4, 5, and 8-10 were also determined by X-ray crystallography. The frequency of the C≡N stretch of the isocyanide increased by 58-91 cm(-1) upon complexation, consistent with coordination of the isocyanide as a σ donor. Enthalpies of complex formation for 1-10 were determined by isothermal titration calorimetry. Enthalpy data suggest the following order of decreasing Lewis acidity: (t)Bu(3)Al ? (i)Bu(3)Al ≥ Me(3)Al ≈ Et(3)Al ? (t)Bu(3)Ga. In the absence of oxygen and protic reagents, the reported complexes do not undergo insertion or elimination reactions upon heating their benzene-d(6) solutions to 80 °C.     

Aluminum and zinc complexes based on an amino-bis(pyrazolyl) ligand: synthesis, structures, and use in MMA and lactide polymerization

The coordination chemistry of bis[2-(3,5-dimethyl-1-pyrazolyl)ethyl]amine (1, LH) with aluminum- and zinc-alkyls has been studied. Reaction of 1 with AlR3 affords the adducts [LH] x AlR3 (R = Me, 2; Et, 3), which undergo alkane elimination upon heating to yield the amido complexes [L]AlR2 (R = Me, 4; Et, 5). Reaction of LiO(iPrO)C=CMe2 with 2 proceeds via N-H deprotonation to give Li[L]AlMe3 (6), while the former enolate adds to 4 to generate [Me2C=C(OiPr)OLi] x [L]AlMe2 (7). Similarly, the 1:1 reaction of ZnEt2 with 1 gives [LH] x ZnEt2 (9), which is transformed into [L]ZnEt (10) upon heating. When an excess of ZnEt2 was used in the latter reaction, the bimetallic complex [L]ZnEt x ZnEt2 (11) was isolated beside 10. Performing the same reaction in the presence of O2 traces yielded selectively the dinuclear ethyl-ethoxide complex [L]Zn2Et2(mu-OEt) (12), which was alternatively prepared from the reaction of 10 and ZnEt(OEt). Zinc chloride complexes [LH] x ZnRCl (R = Et, 13; p-CH3C6H4CH2, 14) and [L]ZnCl (15) were prepared in high yields following similar strategies. Ethyl abstraction from 10 with B(C6F5)3 yields [L]Zn+EtB(C6F5)3- (16). All complexes have been characterized by multinuclear nuclear magnetic resonance (NMR), elemental analysis, and single-crystal X-ray diffraction studies for four-coordinate Al complexes 2, 4, and 6 and Zn complexes 9-12 and 14. Aluminate species 6 and 7 initiate the polymerization of methyl methacrylate, and the monomer conversions are improved in the presence of neutral complexes 2 or 4, respectively; however, these methyl methacrylate (MMA) polymerizations are uncontrolled. Polymerization of rac-lactide takes place at 20 degrees C in the presence of zinc ethoxide complex 12 to yield atactic polymers with controlled molecular masses and relatively narrow polydispersities.