Application of silica-supported Fe–Cu nanoparticles in the selective hydrogenation of <Emphasis Type="Italic">p</Emphasis>-dinitrobenzene to <Emphasis Type="Italic">p</Emphasis>-phenylenediamine

Supported bimetallic Fe–Cu/SiO₂ materials are synthesized, and their catalytic activity in hydrogenation of dinitrobenzene to phenylenediamine at 145–180°С and 1.3 MPa hydrogen pressure is studied for the first time. The best results (89% selectivity toward _p-phenylenediamine at complete conversion of _p-dinitrobenzene) are obtained for the sample synthesized via co-deposition with subsequent calcination at 300°С. The sample contains 7% iron and 3% copper. The formation of separate phases of metal oxides (for the catalysts prepared by impregnation) and mixed bimetallic oxide phases (in case of co-deposition procedure) in calcined samples is revealed via thermoprogrammed reduction with hydrogen.     

Characteristics of the hydrogen bond and the structure of Н-complexes of <Emphasis Type="Italic">p</Emphasis>-n-propyloxybenzoic acid and <Emphasis Type="Italic">p</Emphasis>-n-propyloxy-<Emphasis Type="Italic">p</Emphasis>′-cyanobiphenyl

The conformational properties of p-n-propyloxybenzoic acid and p-n-propyloxy-p′-cyanobiphenyl molecules, which can exhibit liquid crystalline properties in the formation of Н-complexes, are studied (DFT/B3LYP)/cc-pVTZ method). It is found that a molecule of p-n-propyloxybenzoic acid has 16 conformers that can be divided into four groups with respect to relative energies (0 kcal/mol, 1.6 kcal/mol, 6.5 kcal/mol, and 8.1 kcal/mol), and a molecule of p-n-propyloxy-p′-cyanobiphenyl has six conformers with relative energies of 0 kcal/mol (two conformers, φ(С_Ph–O–C–C)=180°) and 1.6 kcal/mol (four conformers, φ(С_Ph–O–C–C)=64.4°). In all conformers of the 3-AOCB molecule, phenyl rings are turned at 35° relative to each other. A conformation with the planar arrangement of two rings has a higher energy by 1.5 kcal/mol. Barriers to the internal rotation of different groups are determined and it is established that the structural nonrigidity of the molecules is mainly due to the possible rotation of the–C₂Н₅ moiety about the C–C bond. It is shown that with increasing temperature the vibrational amplitudes of the OC₃H₇ substituent, which enhance the probabilities of transitions between the conformers, become appreciably larger. It is found that p-n-propyloxybenzoic acid and p-n-propyloxy-p′-cyanobiphenyl can form Н-complexes with the medium hydrogen bond. Two types of the structural organization of Н-complexes are considered: linear and angular. The similarity of energies of Н-complexes with different structures (NBO analysis) can be the reason for the occurrence of two liquid crystalline subphases of p-n-propyloxybenzoic acid and p-n-propyloxy-p′-cyanobiphenyl system.     

Microstructure of Polymers Prepared in the Presence of Tri-<Emphasis Type="Italic">n</Emphasis>-butylboron–<Emphasis Type="Italic">p</Emphasis>-Quinone System

The microstructure of polystyrene, poly(methyl acrylate), and poly(tert-butyl acrylate) obtained in the presence of tri-n-butylboron in combination with naphthoquinone-1,4 and 2,3-dimethylbenzoquinone is studied. The stereoregularity of polymers formed under these conditions may be described in the framework of the first-order Markov chain model. The use of p-quinones in combination with tri-n-butylboron favors an increase in the content of isotactic triads in the polymers. The causes of the observed deviations are discussed.     

Complex formation of magnesium and calcium ions with trimethylenediamine-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>’,<Emphasis Type="Italic">N</Emphasis>’-tetraacetic acid

Stability constants and heat effects of the formation reactions of magnesium and calcium trimethylenediaminetetraacetates at 298.15 K and ionic strength of 0.1, 0.5, and 1.0 (mol/L KNO₃) have been determined by means of potentiometry and calorimetry. Standard thermodynamic parameters (log K⁰, Δ_rG⁰, Δ_rH⁰, and Δ_rS⁰) of the studied equilibriums have been determined.     

Directed Aminomethylation of Pyrrole,Indole, and Carbazole with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>-Tetramethylmethanediamine

Catalytic aminomethylation of pyrrole and indole with N,N,N′,N′-tetramethylmethanediamine in the presence of 5 mol % of ZrOCl₂·8H₂O proceeds selectively at the positions 2, 5 of pyrrole and 1, 3 of indole. Carbazole under the same conditions affords 3-formyl-9-aminomethyl derivative. The reaction in the presence of 5 mol % of K₂CO₃ occurs as monoaminomethylation: for pyrrole at the position 2, for indole at the position 3, and for carbazole at the nitrogen atom of the substrate. Water-soluble 1,1′-(1H-pyrrole-2,5-diyl)bis(N,N-dimethylmethanamine) exhibits a fungistatic activity with respect to phytopathogenic fungi Rhizoctonia solani.     

Thermal behavior of polymers prepared using the tri-<Emphasis Type="Italic">n</Emphasis>-butylboron–<Emphasis Type="Italic">p</Emphasis>-quinone system

Thermal behavior of polymers [poly(methyl methacrylate), poly(methyl acrylate), polystyrene] prepared in the presence of tri-n-butylboron and a series of p-quinones was studied. The heat resistance of the polymers increases with an increase in the inhibition constant of the p-quinone taken for the synthesis. The enhancement of the heat resistance of the polymer is due to a decrease in the amount of weak bonds and to the formation of associates.     

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

Controlled radical copolymerization of styrene and <Emphasis Type="Italic">tert</Emphasis>-butyl acrylate in the presence of tri-<Emphasis Type="Italic">n</Emphasis>-butylborane–<Emphasis Type="Italic">p</Emphasis>-quinone catalytic system

Radical copolymerization of styrene with tert-butyl acrylate is studied under different conditions. It is found that the addition of tri-n-butylborane or tri-n-butylborane along with p-quinones (2,3-dimethylbenzoquinone, 2,5-di-tert-butylbenzoquinone) results in changes in the relative activities of monomers. Copolymerization in the presence of tri-n-butylborane and p-quinones proceeds via the mechanism of reversible inhibition and is characterized by the linear increase in number-average molecular weight with conversion and by the capacity of copolymers of reinitiation. The hydrolyzed copolymer samples form more stable films compared to copolymers prepared via conventional radical copolymerization.     

Oxidation of reaction products of <Emphasis Type="Italic">p</Emphasis>-aryl-<Emphasis Type="Italic">С</Emphasis>,<Emphasis Type="Italic">С</Emphasis>-disubstituted nitrones and dimethyl 3-methylenecyclopropane-1,2-dicarboxylate

Oxidation with 2,3-dichloro-4,5-dicyanobenzoquinone of 2,4-dihydro-1Н-azeto[1,2-a]quinoline-3,4 -dicarboxylates obtained in the reaction of N-aryl-С,С-disubstituted nitrones with Feist’s acid ester resulted in the formation of 2-vinylquinoline-3,4-dicarboxylates in good yields.     

SBR composites reinforced with <Emphasis Type="Italic">N</Emphasis>-isopropyl-<Emphasis Type="Italic">N</Emphasis>′-phenyl-<Emphasis Type="Italic">P</Emphasis>-phenylenediamine-modified clay

SBR compounds including the N-isopropyl-N’-phenyl-p-phenylenediamine-modified clay(organoclay) were prepared.Effects of modified clay and antioxidant(IPPD) contents on mechanical and rheological properties of SBR composites were studied.FTIR results confirmed that the clay was chemically modified by IPPD and changed into an organoclay.X-ray diffraction(XRD) results confirmed the increase in interlayer distance of the clay due to the insertion of IPPD.Rheological and cure characteristics of SBR compounds were determined using RPA(Rubber Process Analyzer) and rheometer.Scorch time and cure time of SBR compounds decreased with introduction of the organoclay.Mechanical properties and heat aging resistance of the SBR composites were improved significantly by incorporation of the organoclay.     

Nenitzescu synthesis of carbamate indole derivatives from <Emphasis Type="Italic">N,N′</Emphasis>-bis(methoxycarbonyl)-<Emphasis Type="Italic">p</Emphasis>-benzoquinone diimine

N,N′-Bis(methoxycarbonyl)-p-benzoquinone diimine reacted with 4-(cyclohex-1-en-1-yl)-and 4-(cyclopent-1-en-1-yl)morpholines in methylene chloride at room temperature to give morpholino-substituted cyclohexane-and cyclopentane-fused indole derivatives. Heating of the latter in boiling 10% hydrochloric acid led to the formation of methyl 6-(methoxycarbonylamino)-1,2,3,4,4a,9a-hexahydro-9H-carbazole-9-carboxylate and methyl 7-(methoxycarbonylamino)-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indole-4-carboxylate, respectively. The reaction of N,N′-bis(methoxycarbonyl)-p-benzoquinone diimine with 4-benzylaminopent-3-en-2-one in CH₂Cl₂ in the presence of BF₃·Et₂O on heating gave methyl 3-acetyl-2-methyl-(5-methoxy-carbonylamino)-1H-indole-1-carboxylate.     

Kinetics of the Decomposition of α-Phenylethyl Hydroperoxide in the Presence of <Emphasis Type="Italic">N,N,N′,N′</Emphasis>-Tetramethyl-<Emphasis Type="Italic">para</Emphasis>-Phenylenediamine

It is found that the tertiary amine N,N,N′,N′-tetramethyl-para-phenylenediamine (TMPD) causes the decomposition of α-phenylethyl hydroperoxide (ROOH), and the interaction between the components occurs in accordance with a complicated rate law. It is demonstrated that more than 30 hydroperoxide molecules (n) can be degraded at a molecule of TMPD; this fact suggests that the amine has a catalytic effect on the process. The value of n increases with the [ROOH]₀/[TMPD]₀ ratio. The initial rates of consumption of ROOH and TMPD linearly increase with the initial concentrations of both of the reactants. The apparent rate constant of the reaction is k = 0.4 l mol^?1 s^?1 (393 K), as calculated from the initial rates of ROOH consumption. As a result of the interaction, TMPD is converted into an inhibitor. The rate constant of the reaction of this inhibitor with ethylbenzene peroxy radicals is about 2 × 10⁴ l mol^?1 s^?1.     

10<Emphasis Type="Italic">α</Emphasis>-Hydroxy-<Emphasis Type="Italic">β</Emphasis>-isomorphine,a by-product of the synthesis of 10<Emphasis Type="Italic">α</Emphasis>-hydroxymorphine

Abstract  A new compound was isolated from the reaction mixture after O-demethylation of 6-O-acetyl-10α-acetoxycodeine with boron tribromide. The structure of this compound, 10α-hydroxy-β-isomorphine, was elucidated by spectral data, and its spatial arrangement was deduced from an NOE experiment. Capillary zone electrophoresis was used for separation of morphine and its 10-hydroxy analogues. Graphical abstract        

Conformational analysis of the structure of <Emphasis Type="Italic">p</Emphasis>-butoxybenzylidene-<Emphasis Type="Italic">p</Emphasis>′-propionyloxyaniline at temperatures of crystal → nematic and nematic → isotropic liquid phase transitions

The molecular structure and conformational properties of the p-butoxybenzylidene-p′-propionyloxyphenylaniline molecule in the crystalline state and at temperatures of the crystal → nematic and nematic → isotropic liquid phase transitions were examined by AM1 calculations. It was found that the nematic → isotropic liquid phase transition is accompanied by a change in the molecular conformation.     

Study of<Emphasis Type="Italic"> β</Emphasis>–<Emphasis Type="Italic">α</Emphasis> recrystallization of the polypropylene

The crystalline modifications and of polypropylene (PP) were studied by using polarized light microscopy (PLM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). Typically crystals surrounded by spherulites were observed at low temperature. With increasing temperature the crystals melted and a new crystal appeared. More interestingly, the melting temperature of the new crystal was about 5 ° higher than that of spherulites originally present in the sample formed isothermally. It was assumed that this new crystal was the recrystalline crystal. This assumption was supported by the DSC results. Furthermore, the crystallization kinetics of the PP used was studied on the basis of the traditional Avrami analysis. As a result, the Avrami exponents of crystallization temperature from 120 to 130 °C ranged between 4.21 and 3.60, indicating that the crystallization mechanism of PP order melt was spherulitic growth and random nucleation.     

1,3-Diamino-2-Hydroxypropane-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-Tetraacetic Acid: Crystal and Molecular Structures

The synthesis, IR spectroscopic study, and X-ray diffraction analysis (CIF file CCDC no. 1574078) are carried out for 1,3-diamino-2-hydroxypropane-N,N,N′,N′-tetraacetic acid (I). The structural units of a crystal of compound I are (H_4.5HPdta)^0.5– anions, (H_5.5HPdta)^0.5+ cations, and molecules of water of crystallization joined by a branched network of hydrogen bonds: strong intermolecular O–H…O and intramolecular N–H…O bonds.     

Cyclization of the substituted <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">Ortho</Emphasis>-cyclopropylphenyl)-<Emphasis Type="Italic">N′</Emphasis>-aryl ureas and thioureas in the gas phase and solution

Electron ionization (EI), chemical ionization (CI), tandem mass spectrometry, high-resolution measurements, and labeling studies as well as quantum chemical calculations were used to understand the behavior of the molecular radical cations (EI) and protonated molecules (CI) of substituted N-(ortho-cyclopropylphenyl)-N'-aryl ureas and N-(ortho-cyclopropylphenyl)-N'-aryl thioureas in a mass spectrometer. Fragmentation schemes and possible mechanisms of primary isomerization were proposed. According to the fragmentation pattern, formation of the corresponding benzoxazines and benzothiazines was considered as the major process of isomerization of the original M(+.) and MH(+), although some portions of these ions definitely transformed into other structures. The treatment of N-(ortho-cyclopropylphenyl)-N'-phenyl urea and N-(ortho-cyclopropylphenyl)-N'-phenylthiourea in solution with strong acids formed predicted 4-ethyl-N-phenyl-4H-3,1-benzoxazin-2-amin and 4-ethyl-N-phenyl-4H-3,1-benzothiazin-2-amine as principal products.     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.     

Influence of the force interaction on accumulation of macroscopic correlations in elementary reaction <Emphasis Type="Italic">A</Emphasis> + <Emphasis Type="Italic">B</Emphasis> → <Emphasis Type="Italic">C</Emphasis>

The applicability of the Encounter Theory (ET) (the prototype of the Collision Theory) concepts for widely occurring diffusion assisted irreversible bulk reaction A + B →C (for example, radical reaction) in dilute solutions taking account of initial microscopic correlations and force interactions between reactants has been treated theoretically with modern many-particle method for the derivation of non-Markovian binary kinetic equations. The method shows that taking into consideration initial correlations and force interactions leads to the redefinition of the Markovian rate constant only in the expressions derived earlier. Thus, just as in the reaction A + A →C and the reaction A + B →C neglecting force and initial correlations, the Modified Encounter Theory (MET), when reduced to equations of a Regular Form, both extends the time applicability range of ET homogeneous rate equation, and yields the inhomogeneous equation of the Generalized Encounter Theory (GET). It reveals macroscopic correlations induced by the encounters in the reservoir of free walks in full agreement with physical considerations. Time accumulation of macroscopic correlations obeys the same time law as in the previously considered case neglecting force interactions. Just the rate of the process will change, according to traditional redefinition of the steady-state constant of the reaction.