Hydrogen bond dynamics at water/organic liquid interfaces

Hydrogen bond dynamics at the neat interface between water and a series of organic liquids are studied with molecular dynamics computer simulation. The organic liquids are nonpolar (carbon tetrachloride), weakly polar (1,2-dichloroethane), and polar (nitrobenzene). The effect of surface polarity and surface roughness is examined. The dynamics are expressed in terms of the hydrogen bond population autocorrelation functions and are found to be nonexponential and strongly dependent on the nature of the organic phase. In particular, at all interfaces, the dynamics are slower at the interface than in the bulk and sensitive to the location of the water molecules along the interface normal.     

On the choice of a reference state for one‐step perturbation calculations between polar and nonpolar molecules in a polar environment

One‐step perturbation is an efficient method to estimate free energy differences in molecular dynamics (MD) simulations, but its accuracy depends critically on the choice of an appropriate, possibly unphysical, reference state that optimizes the sampling of the physical end states. In particular, the perturbation from a polar moiety to a nonpolar one and vice versa in a polar environment such as water poses a challenge which is of importance when estimating free energy differences that involve entropy changes and the hydrophobic effect. In this work, we systematically study the performance of the one‐step perturbation method in the calculation of the free enthalpy difference between a polar water solute and a nonpolar “water” solute molecule solvated in a box of 999 polar water molecules. Both these polar and nonpolar physical reference states fail to predict the free enthalpy difference as obtained by thermodynamic integration, but the result is worse using the nonpolar physical reference state, because both a properly sized cavity and a favorable orientation of the polar solute in a polar environment are rarely, if ever, sampled in a simulation of the nonpolar solute in such an environment. Use of nonphysical soft‐core reference states helps to sample properly sized cavities, and post‐MD simulation rotational and translational sampling of the solute to be perturbed leads to much improved free enthalpy estimates from one‐step perturbation. © 2012 Wiley Periodicals, Inc.     

Adsorption of organosilanes at a Zn-terminated ZnO (0001) surface: molecular dynamics study

Four different organosilanes (octyltrihydroxysilane, butyltrihydroxysilane, aminopropyltrihydroxysilane, and thiolpropyltrihydroxysilane) adsorbed at a reconstructed Zn-terminated polar ZnO (0001) surface are studied via constant temperature (298 K) molecular dynamics simulations. Both single adsorbed silane molecules as well as adsorbed silane layers are modeled, and the energy, distance, orientation, and alignment of these adsorbates are analyzed. The adsorbed silane molecules exhibit behavior depending on the chemical nature of their tail (nonpolar or polar) as well as on the silane concentration at the solid surface (single adsorption or silane layer). In contrast to the O-terminated ZnO surface studied previously, now adsorption can only occur at the vacancies of this reconstructed crystal surface, thus leading to an arched structure of the liquid phase near the crystal surface. Nevertheless, both nonpolar and polar single adsorbed silanes show a similar orientation and alignment at the surface (orthogonal in the former, parallel in the latter case) as for the O-terminated ZnO surface, although the interaction energy with the surface is considerably increased for nonpolar silanes while it is nearly unaffected for the polar ones. For adsorbed silanes within silane layers, the difference to single adsorbed silanes depends on the polarity of the tail: nonpolar silanes again show an orthogonal alignment, while polar silanes exhibit two different orientations at the solid surface-a head and a tail down configuration. This leads to two completely different but nevertheless stable orientations of these silanes at the Zn-terminated ZnO surface.     

Surface energy of fluorinated surfaces

By fluorinating the surface of a polymer, the hydrogen bonding energy of a polar surface has been defined. The contact angles for three solvent classes; nonpolar, polar and hydrogen bonding, on a polar surface results in the separation of dispersion, polar, and hydrogen bonding energies. Both critical surface tension plots and theoretical calculations were used to define the surface energy for fluorinated polyethylene.     

Role of additives in the water vapor transport through block co-poly(amide/ether) membranes: effects on surface and bulk polymer properties

In the last years there has been a growing industrial interest in modifying the performance of traditional polymers by using additives, working as modifiers for processing, rheological, transport, bonding, and pigmentation properties. This work was focused on the understanding of the relationships between chemical structure and water vapour transport through a polymer matrix modified by different additives regarding hydrophilicity and molecular structure. A screening of the changes in surface energies and bulk morphology, as a function of the chemical nature and weight percent modifier, allowed estimating the effects on the water vapour transport through polymer membranes. Static and dynamic contact angle measurements explained the difference in surface wettability and affinity to polar species such as water molecules. Modifiers having polar groups improved the surface hydrophilicity, enhancing the breathability of the membranes, while hydrophobic components such as aromatic structures led to a reduction of the water vapour mass uptake onto the membrane surface. On the other hand, thermal analyses showed a tendency of the polymer structure to reduce its own mobility with consequent slowdown of the diffusion through polymer matrix. Modification with large and bulky structures disrupted the polymer packing density, but simultaneously increased the stiffness of the polymer chains, inhibiting the penetrant migration. As a result, balancing the effects due to modifier polarity and bulky structure, it is possible to change the performance of a polymer in terms of transport, going from breathable membranes to barrier films.     

Surface‐Polarity‐Induced Spatial Charge Separation Boosts Photocatalytic Overall Water Splitting on GaN Nanorod Arrays

Photocatalytic overall water splitting has been recognized as a promising approach to convert solar energy into hydrogen. However, most of the photocatalysts suffer from low efficiencies mainly because of poor charge separation. Herein, taking a model semiconductor gallium nitride (GaN) as an example, we uncovered that photogenerated electrons and holes can be spatially separated to the nonpolar and polar surfaces of GaN nanorod arrays, which is presumably ascribed to the different surface band bending induced by the surface polarity. The photogenerated charge separation efficiency of GaN can be enhanced significantly from about 8 % to more than 80 % via co‐exposing polar and nonpolar surfaces. Furthermore, spatially assembling reduction and oxidation cocatalysts on the nonpolar and polar surfaces remarkably boosts photocatalytic overall water splitting, with the quantum efficiency increased from 0.9 % for the film photocatalyst to 6.9 % for the nanorod arrays photocatalyst.     

Surface-Polarity-Induced Spatial Charge Separation Boosts Photocatalytic Overall Water Splitting on GaN Nanorod Arrays

Photocatalytic overall water splitting has been recognized as a promising approach to convert solar energy into hydrogen. However, most of the photocatalysts suffer from low efficiencies mainly because of poor charge separation. Herein, taking a model semiconductor gallium nitride (GaN) as an example, we uncovered that photogenerated electrons and holes can be spatially separated to the nonpolar and polar surfaces of GaN nanorod arrays, which is presumably ascribed to the different surface band bending induced by the surface polarity. The photogenerated charge separation efficiency of GaN can be enhanced significantly from about 8 % to more than 80 % via co-exposing polar and nonpolar surfaces. Furthermore, spatially assembling reduction and oxidation cocatalysts on the nonpolar and polar surfaces remarkably boosts photocatalytic overall water splitting, with the quantum efficiency increased from 0.9 % for the film photocatalyst to 6.9 % for the nanorod arrays photocatalyst.     

Design of a new invertible polymer coating on a solid surface and its effect on dispersion colloidal stability

This article presents a new approach to building up self-adjustable invertible polymer coatings at solid surfaces. The approach is based on a two-step process. In the first step, the surface of dispersed TiO2 or silicon wafers was functionalized with the aid of a reactive copolymer, viz., poly(styrene-alt-maleic anhydride) (PSM), to which, in the second step, the chains of amphiphilic oligoester have been tethered. The latter contains both hydrophilic poly(ethylene glycol) and hydrophobic aliphatic dibasic acid moieties being alternately distributed along the oligomer chains. It is shown that the titania modified in this way can form stable suspensions in both polar (water) and nonpolar (toluene) media. Moreover, multiple drying/redispersion cycles demonstrate the ability of the modified titania particles, after their removal from one type of dispersion and consequent drying, to be redispersed in dispersing media strongly differing by polarity from that of the previous medium. An environmentally induced switching of the surface properties has been observed via the measurement of the wetting contact angles and scanning force microscopy (SFM) of silicon wafers covered by PSM with tethered oligoester chains. These experiments give strong support for the predicted capability of such polymer coatings to switch their environmental appearance (i.e., to behave as a self-adjustable invertible interface because of the ability of the tethered amphiphilic oligoester chains to change their conformations in response to environmental changes in such a manner so as to adapt and enhance their compatibility with the surrounding media).     

Both water- and organo-soluble supramolecular polymer stabilized by hydrogen-bonding and hydrophobic interactions

A new bis-urea based supramolecular polymer is reported and shown by viscosimetry, neutron scattering (SANS), and calorimetry (ITC) to self-assemble in a wide range of solvents, encompassing the polarity scale from water to toluene. The presence of both hydrogen-bonding and hydrophobic groups ensures that self-assembly occurs in water, aprotic polar solvents, and nonpolar solvents. Both the driving force for the assembly and the exact structure of the filaments is solvent dependent, but whatever the solvent, long rigid filaments are formed in dynamic equilibrium with the monomer.     

On surface-initiated atom transfer radical polymerization using diazonium chemistry to introduce the initiator layer

This work features the controllability of surface-initiated atom transfer radical polymerization (SI-ATRP) of methyl methacrylate, initiated by a multilayered 2-bromoisobutyryl moiety formed via diazonium chemistry. The thickness as a function of polymerization time has been studied by varying different parameters such as the bromine content of the initiator layer, polarity of reaction medium, ligand type (L), and the ratio of activator (Cu(I)) to deactivator (Cu(II)) in order to ascertain the controllability of the SI-ATRP process. The variation of thickness versus surface concentration of bromine shows a gradual transition from mushroom to brush-type conformation of the surface anchored chains in both polar and nonpolar reaction medium. Interestingly, it is revealed that very thick polymer brushes, on the order of 1 μm, can be obtained at high bromine content of the initiator layer in toluene. The initial polymerization rate and the overall final thickness are higher in the case of nonpolar solvent (toluene) compared to polar medium (acetonitrile or N,N-dimethylformamide). The ligand affects the initial rate of polymerization, which correlates with the redox potentials of the pertinent Cu(II)/Cu(I) complexes (L = Me(6)TREN, PMDETA, and BIPY). It is also observed that the ability of polymer brushes to reinitiate depends on the initial thickness and the solvent used for generating it.     

Photophysics of Fluorescent Contact Sensors Based on the Dicyanodihydrofuran Motif

Fluorescent molecular rotors have been used for measurements of local mobility on molecular length scales, for example to determine viscosity, and for the visualization of contact between two surfaces. In the present work, we deepen our insight into the excited-state deactivation kinetics and mechanics of dicyanodihydrofuran-based molecular rotors. We extend the scope of the use of this class of rotors for contact sensing with a red-shifted member of the family. This allows for contact detection with a range of excitation wavelengths up to ∼600 nm. Steady-state fluorescence shows that the fluorescence quantum yield of these rotors depends not only on the rigidity of their environment, but – under certain conditions – also on its polarity. While excited state decay via rotation about the exocyclic double bond is rapid in nonpolar solvents and twisting of a single bond allows for fast decay in polar solvents, the barriers for both processes are significant in solvents of intermediate polarity. This effect may also occur in other molecular rotors, and it should be considered when applying such molecules as local mobility probes.     

Wetting behavior of low-index cubic SiC surfaces

We report on the interaction of water molecules with polar and nonpolar stoichiometric surfaces of cubic silicon carbide, as described by ab initio molecular dynamics at finite temperature. Our calculations show that, irrespective of coverage, in the gas phase water spontaneously dissociates on both polar Si-terminated (001) and nonpolar (110) surfaces, following similar mechanisms. The specific geometric arrangement of atoms on the outermost surface layer is responsible for water orientation and coordination and thus plays a major role in determining surface reactivity. This is found to be the case also for water on a computer-generated amorphous-SiC surface. In addition, from a macroscopic standpoint, the ability of the two crystalline surfaces with different polarities to induce water dissociation can be related to the similarities of their ionization potentials.     

An effective way to stabilize colloidal particles dispersed in polar and nonpolar media

This article offers a new approach to building up self-adjustable invertible polymer coatings at solid surfaces. The approach is based on a two-step process. In the first step, the surface of dispersed TiO2 has been functionalized with the aid of toluene diisocyanate (TDI) as a coupling agent. In the second step, the chains of amphiphilic oligoester have been covalently grafted to the titanium dioxide surface functionalized with isocyanate groups. It is shown that the titania modified in this way can form stable suspensions in both polar (water) and nonpolar (toluene) media. Multiple redispersion cycles show the ability of the modified titanium dioxide particles, after their removal from one type of dispersion and consequent drying, to be redispersed in dispersing media strongly differing by polarity from the previous.     

Energy of adsorption interaction and surface coverage from polymer of various molecular structures

Adsorption from solutions of mixtures of polymers which considerably differ by the parameter of thermodynamics flexibility (sigma) has been studied at various components ratio. Initial and equilibrium concentrations of solutions were determined, surface coverage (theta) and energy of adsorption interaction (Q, kJ/mol of segments) were estimated by means of IR spectroscopy. The objects of investigation were: cis-1,4-polybutadiene rubber (PB) and cellulose triacetate (CTA). Aerosil (fumed silica) was used as an adsorbent. Analysis of the experimental data testifies that polymer polarity and its affinity to the surface have the decisive influence on the adsorption. Polar stiff chain CTA has greater affinity to the surface of adsorbent and correspondingly has greater adsorption activity as compared with flexible, but nonpolar PB. The values of energy of adsorption interaction and surface coverage obtained under the adsorption from polymer systems first of all depend on whether the stiff chain polar component or flexible chain nonpolar component prevails in the system. Increase of concentration of the nonpolar PB flexible chain in the system results in diminishing of summary energy of adsorption interaction, but its great flexibility at the same components ratio provides the maximal values of surface coverage. The greater values of the surface coverage under the adsorption from the solutions of polymer mixtures in comparison with the individual solutions are explained by the simultaneous adsorption of both components for all concentration intervals.     

Overview of the retention in subcritical fluid chromatography with varied polarity stationary phases

Retention and separation of achiral compounds in supercritical fluid chromatography (SFC) depend on numerous parameters: some of these parameters are identical to those encountered in HPLC, such as the mobile phase polarity, while others are specific to SFC, as the density changes of the fluid, due to temperature and/or pressure variations. Additional effects are also related to the fluid compressibility, leading to unusual retention changes in SFC, for instance when flow rate or column length is varied. These additional effects can be minimised by working at lower temperatures in the subcritical domain, simplifying the understanding of retention behaviours. In these subcritical conditions, varied modifiers can be mixed to carbon dioxide, from hexane to methanol, allowing tuning the mobile phase polarity. With nonpolar modifiers, polar stationary phases are classically used. These chromatographic conditions are close to the ones of normal-phase LC. The addition of polar modifiers such as methanol or ACN increases the mobile phase polarity, allowing working with less polar stationary phases. In this case, despite the absence of water, retention behaviours generally follow the rules of RP LC. Moreover, because identical mobile phases can be used with all stationary phase types, from polar silica to nonpolar C18-bonded silica, the classical domains, RP and normal-phase, are easily brought together in SFC. A unified classification method based on the solvation parameter model is proposed to compare the stationary phase properties used with the same subcritical mobile phase.     

Effect of electric fields on contact angle and surface tension of drops

Contact angles of sessile drops were experimentally investigated in the electric field. The experimental setup was designed such that the electric field was applied to all three interfaces. The advanced Automated Polynomial Fitting (APF) methodology was employed to measure contact angles with high accuracy. The significance of the observations and trends was examined by conducting statistical tests of hypothesis. It was found that contact angles of polar liquids such as alcohols increase in the electric field. However, no significant trend was observed for nonpolar liquids such as alkanes. The change in the contact angle was found to be stronger for liquids with longer molecules. It was shown that the polarity of the electric field is not an underlying factor in the observed trends. Using the equation of state for interfacial tensions, the observed shift in contact angles was translated into a corresponding change in surface tension of the liquids. The results suggest that the surface tension of alcohols increases by one to two percent (depending on the size of molecules) when an electric field of the order of magnitude of 10(6) V/m is applied.     

Hydrophilic gold nanoparticles adaptable for hydrophobic solvents

Surface ligand molecules enabling gold nanoparticles to disperse in both polar and nonpolar solvents through changes in conformation are presented. Gold nanoparticles coated with alkyl-head-capped PEG derivatives were initially well dispersed in water through exposure of the PEG residue (bent form). When chloroform was added to the aqueous solution of gold nanoparticles, the gold nanoparticles were transferred from an aqueous to a chloroform phase through exposure of the alkyl-head residue (straight form). The conformational change (bent to straight form) of immobilized ligands in response to the polarity of the solvents was supported by NMR analyses and water contact angles.     

The effect of solvent polarity on the molecular surface properties and adhesion of Escherichia coli

The elasticity and molecular surface characteristics of Escherichia coli JM109 were investigated via atomic force microscopy (AFM) in solvents expressing different polarities. The nature of bacterial adhesion and surface characteristics was probed in formamide, water, and methanol, with dielectric constants of 111, 80, and 33, respectively. Solvent polarity affected the elasticity of the bacterium, the conformation of the cell surface biopolymers, the height of the surface biopolymers, and measured adhesion forces between the bacterium and silicon nitride. By applying the Hertz model to force-indentation data, we determined that the Young's modulus was greatest in the least polar solvent, with values of 182 +/- 34.6, 12.8 +/- 0.1, and 0.8 +/- 0.3 MPa in methanol, water, and formamide, respectively. The thickness of the biopolymer brush layer on the bacterial surface was quantified using a steric model, and these values increased as polarity increased, with values of 27, 93, and 257 nm in methanol, water, and formamide, respectively. The latter results suggest that highly polar conditions favor extension of the biopolymer brush layer. Cross-sectional analysis performed on tapping mode images of the bacterial cells in methanol, water, and formamide further supported this hypothesis. The image height values are larger, since the image analysis measures the height of the bacterium and the polymer layer, but the trend with respect to solvent polarity was the same as was obtained from the steric model of the brush length. Measured adhesion forces scaled inversely with solvent polarity, with greatest adhesion observed in the least polar solvent, methanol. The combined conformational changes to the bacterial surface and biopolymer layer result in different presentations of macromolecules to a substrate surface, and therefore affect the adhesion forces between the bacterial molecules and the substrate. These results suggest that polarity of the solvent environment can be manipulated as a design parameter to control or modify the bacterial adhesion process.     

The influence of side groups and polarity of polymers on the kind and effectiveness of their surface modification by air plasma action

The changes of contact angle (θ) and surface free energy (γ_S) under low-temperature air plasma in the polymers of different chemical structure and polarity (polyethylene, PE; polypropylene, PP; poly(ethylene terephtalate), PET and poly(methyl methacrylate), PMMA) pointed out to the greater effect of short-time plasma action (5-15 s) on these parameters as compared to longer times of exposure.The non-reversion effect of θ changes caused by plasma in PE and PP suggests that the oxidation processes mainly decide about values in nonpolar polymers. The significantly greater θ changes in PE than those in PP indicate that the side groups present in the main chains impede oxidation of such a polymer by plasma.The reversion of θ changes in PET and in PMMA, and return of these values to almost the initial ones after 10 min storage proves that the main reason for θ changes in polar polymers is a certain alteration of the chain conformation.These changes, taking place after longer plasma treatment, suggest that the side ester groups in PMMA retard the above-mentioned conformational transformations. Then, in both kinds of polymers (polar and nonpolar) the structure of macrochain decides about the efficiency of reaction caused by plasma, and at the same time the side groups retard not only the oxidation processes but the conformational changes as well.     

Chemical force spectroscopy in heterogeneous systems: intermolecular interactions involving epoxy polymer,mixed monolayers,and polar solvents

We used chemical force microscopy (CFM) to study adhesive forces between surfaces of epoxy resin and self-assembled monolayers (SAMs) capable of hydrogen bonding to different extents. The influence of the liquid medium in which the experiments were carried out was also examined systematically. The molecular character of the tip, polymer, and liquid all influenced the adhesion. Complementary macroscopic contact angle measurements were used to assist in the quantitative interpretation of the CFM data. A direct correlation between surface free energy and adhesion forces was observed in mixed alcohol-water solvents. An increase in surface energy from 2 to 50 mJ/m(2) resulted in an increase in adhesion from 4-8 nN to 150-300 nN for tips with radii of 50-150 nm. The interfacial surface energy for identical nonpolar surface groups of SAMs was found not to exceed 2 mJ/m(2). An analysis of adhesion data suggests that the solvent was fully excluded from the zone of contact between functional groups on the tip and sample. With a nonpolar SAM, the force of adhesion increased monotonically in mixed solvents of higher water content; whereas, with a polar SAM (one having a hydrogen bonding component), higher water content led to decreased adhesion. The intermolecular force components theory was used for the interpretation of adhesion force measurements in polar solvents. Competition between hydrogen bonding within the solvent and hydrogen bonding of surface groups and the solvent was shown to provide the main contribution to adhesion forces. We demonstrate how the trends in the magnitude of the adhesion forces for chemically heterogeneous systems (solvents and surfaces) measured with CFM can be quantitatively rationalized using the surface tension components approach. For epoxy polymer, inelastic deformations also contributed heavily to measured adhesion forces.