A non-empirical molecular orbital study on loewenstein''s rule and zeolite composition

The role of the “aluminum avoidance rule” in zeolite frameworks and its relation to the electronic structure and stability of various structural units of alumosilicates were studied by non-empirical SCF—MO techniques. Al—O—Al-type linkages are unstable according to the calculations. The presence of cations in the neighbourhood of T₁—O—T₂ bridges (T₁, T₂ = Si or Al) is the least stabilizing when T₁ = T₂ = Al.     

Al2O3/Au(111)反相催化剂在CO氧化反应中界面作用的理论研究

氧化物负载的金催化剂具有温和条件下优异的CO催化氧化活性。实验与理论计算表明,金与氧化物两相界面在催化反应过程中具有重要地位。反相催化剂提供了全新的角度以探究界面的重要地位。本文以Au（111）表面负载Al₂O₃团簇为反相催化剂模型,基于密度泛函理论,对催化剂模型的构型、界面性质以及O₂、CO的吸附与氧化进行了理论计算与研究。理论计算表明：电荷的迁移增强了Al₂O₃小团簇在Au（111）表面的附着,在催化剂金表面与氧化铝的两相界面位置,Au原子与Al原子的协同作用使得氧分子易于在界面位置吸附,并因此高度活化。对催化CO氧化反应路径,分别计算了缔合机理和解离机理不同路径,从活化能分析表明缔合机理比解离机理更可能发生。本文的工作揭示了反相催化剂催化CO氧化的活性本质,表明两相界面在金催化CO氧化中具有重要作用。     

Al代位合金化对D88-Ti5Si3力学性能与电子结构影响的第一性原理研究

采用基于密度泛函理论(DFT)的第一性原理赝势平面波方法, 计算了不同数量的Al 原子代位六方D8₈结构的Ti₅Si₃晶体中的Si 原子后的形成能(ΔH_f)、结合能(ΔE_coh)、体模量(B)、剪切模量(G)、泊松比(ν)、Cauchy 压力参数(C₁₂―C₆₆,C₁₃―C₄₄)、金属性(f_m)和派-纳力(τ_P-N)等参数, 表征了Al 合金化对D8₈-Ti₅Si₃的结构稳定性和力学性质的影响. 结合态密度、差分电荷密度图和Mulliken 布居等电子结构分析, 揭示了Al 原子的添加量对D8₈-Ti₅Si₃的韧/脆性变化的影响机制. 研究表明, D8₈-Ti₅Si₃晶体中强的Ti^6g―Si^6g方向共价键是导致其室温脆性的主要原因. 当1 个和2 个Al 原子占据D8₈-Ti₅Si₃晶体中Si^6g位置时, 形成了键强较弱的Al^6g―Si^6g键、Ti^6g―Al^6g键和Ti4d―Al^6g键, 同时降低了D8₈-Ti₅Si₃中Ti^6g―Si^6g键的强度和数量, 从而提高了D8₈-Ti₅Si₃的韧性. 当D8₈-Ti₅Si₃晶体中Si^6g位置被3个Al 原子所占时, Al^6g―Si^6g键消失, 而Ti^6g―Si^6g键的强度增加, 导致Ti₅(Si_1-xAl_x)₃的脆性增加.     

Diffusion by chemical bond hopping of single O2 and H on Si(111)-7×7 surfaces

Using a variable temperature STM to trace in detail the path of single particle movement, it is possible to derive diffusion parameters of individual atoms and molecules on solid surfaces as well as to probe the mechanisms. Below ˜370 °C, O₂ molecules adsorb on Si(111)-7×7 surfaces at the top site of Si-adatoms as bright image spots. An O₂ molecule can hop between two adatom sites within the half unit cell it adsorbs via two rest-atom sites. Above this temperature, it can either hop out of the half cell, or can go through other reaction pathways. In contrast, for H atoms, the adsorption sites are rest-atom sites. An H atom darkens the rest-atom in filled state image, but the surrounding adatoms will appear brighter because of a reverse charge transfer. Above ˜280 °C, it can hop to a neighbor rest atom site within the half cell via an adatom site. The adatom in the short lived intermediate state appears darker because of the saturation of its dangling bond. Above ˜340 °C, it can hop out of the half cell via two adatom sites. Thus diffusion of H and O₂ on this surface is achieved by hopping of chemical bonds via intermediate states. We have also derived site and pathway-specific activation energies and frequency factors and the potential energy curves for the hopping of O₂ and H on Si(111)-7×7 surfaces.     

Copper adsorption and Si, Al, Ca, Mg, and Na release from clinoptilolite

Copper adsorption onto clinoptilolite (natural zeolite), Al/Si dissolution, and Mg, Ca, and Na release from the substrate were the subjects of the investigation described here. Experimental variables were Cu and electrolyte concentrations and solution pH. Copper adsorption was found to increase with increased pH and with decreased electrolyte concentration. Large amounts of K were also adsorbed from electrolyte. Since solution pH was assumed as a variable, the effects of [H(+)] differentiation on Cu adsorption and on Al/Si dissolution were also examined. Al dissolution was affected mainly by electrolyte concentration, whereas Si dissolution was affected mainly by adsorbed Cu amount. It was assumed that the release of Mg, Ca, and Na occurs through ion-exchange reactions with solution K(+), because their release is affected more by electrolyte concentration than by adsorbed Cu. From the study of FTIR spectra for various samples used in the present investigation, we observed that the removal of framework Si/Al shifts the band which was attributed to O-T-O stretching vibration toward higher frequency. Significant changes were observed for the bands assigned to Si-OH-Al bridges and to monomeric and polymeric hydrogen bonds at the region between 3650 and 3200 cm(-1). It is proposed that the Cu species caused the destruction of H-bonded structures, whereas K adsorbed species were located at exchangeable sites after an ion-exchange process between K and Ca, Mg, and Na from the zeolite's surface. An expansion of the zeolite framework was detected from XRD patterns under acid conditions.     

Vibrational characterization and electronic properties of long range-ordered, ideally hydrogen-terminated Si(111)

The use of a well defined, long range ordered surface is of fundamental interest for the determination of surface-specific intrinsic physical parameters. Ideally hydrogen terminated Si(111) surfaces are prepared by wet chemical treatment in basic HF solutions. The mechanism of formation is based on preferential etching of defects, leading to an ideal hydrogen terminaison of the (111) plane, without any reconstruction and with a high degree of perfection. Infrared spectroscopy is used to probe the quality of the surfaces by quantifying the extent of the perfect domains.

High resolution photoemission spectroscopy of such highly homogeneous surfaces shows exceptional narrow features in both the valence band and the core level regions. The valence band levels and their dispersion are well described by first-principles calculations using a quasi particle self-energy approach within the Heidin's GW approximation.

Two surfaces core level states are evidenced, arising from the silicon surface atoms and the backbonds. A crystal field effect splits the surface Si 2_p3/2 component. Their position and relative intensity find a satisfactory agreement with recent calculations using first principles perturbation theory.     

Scanning tunneling microscopy study of fullerenes

Scanning tunneling microscopy investigations of adsorption and film growth of various fullerenes on semiconductor and metal surfaces are reviewed. The fullerenes being studied are C₆₀, C₇₀, C₈₄, Sc@C₈₂ and Y@C₈₂ and the substrates being used for adsorption are Si (111), Si (100), Ge (111), GaAs (110), GaAs (001), Au (111), Au (110), Au (100), Cu (111) and Ag (111) surfaces.     

How bridging ligands and neighbouring groups tune the gold-gold bond strength

Gold-gold interactions in small polynuclear complexes are analysed using extended Hückel calculations. They are influenced by the nature of the ligand donor atoms, by the bridging ligands, but most by the formal oxidation state of the metal. Au---Au bonds are much stronger in complexes of Au(II) and Au(III), but a weak interaction between two d¹⁰ centres exists for Au(I) complexes, owing to mixing of the s and p orbitals with the d orbitals. Phosphines induce stronger metal-metal bonds when coordinated trans to the Au---Au bond in [Au(II)[(CH₂)₂PPh₂]L]₂ (Ph = phenyl), but have the opposite effect when bonded orthogonally to the metal-metal axis in Au(I) binuclear species. When two gold atoms are bridged by a single carbon atom, belonging either to mesityl (Mes = 2,4,6-Me₃C₆H₂) or CR₂, the former produces stronger Au(I)---Au(I) interactions, reflected in shorter distances. Formal oxidation states are proposed for the gold atoms in two mixed-valence clusters, [Au4(C₆F₅)₂((PPh₃)_{2CH})2(PPh3)2](ClO4)2 and [{(2,4,6-C6F3H2)Au(CH2PPh2CH2)2Au{in2}-Au(CH₂PPh₂CH₂)₂Au](ClO₄)₂. The results suggest a higher oxidation state for the outer gold atoms, in both the T-shaped tetranuclear cluster and the Au₆ linear chain.     

Dissociation of CH3I on the Al111 surface--an STM and density functional theory study

The reaction of methyl iodide with the Al(111) surface was studied by room-temperature scanning tunneling microscopy (STM) and by first principles calculations. It was found that at 300 K methyl iodide decomposes on the Al(111) surface, forming methyl (CH(3)), methylidyne (CH), and adsorbed iodine. Methyl groups are observed to occupy atop sites by STM. The occupation of the hollow site by methylidyne was observed in STM measurements. Total energy density functional theory calculations have shown that methyl species occupy atop Al sites (E(A) = 45.3 kcal/mol), methylidyne species adsorb on fcc hollow sites (E(A) = 155.0 kcal/mol), while individual iodine atoms can bind on both on-top or hollow sites with adsorption energies between 54 and 56 kcal/mol.     

Ab initio SCF and DFT models of met-car adducts: Ti8C12(L)n (L = Cl, NH3, CO, C6H6; N = 4, 8)

The addition of Cl, NH₃, CO, C₆H₆ to Ti₈C₁₂ has been investigated by means of ab initio RHF and DFT calculations. The metallocarbohedrene (met-car) molecule has been modelled as a structure of a tetracapped tetrahedron with T_d symmetry and two distinct metal sites, found to be most stable from previous theoretical investigations. The addition of four molecules to the atoms of the external tetrahedron of metal atoms has been found to be exothermic for all ligands considered. The addition of four extra ligands leading to T₈C₁₂(L)₈ appears easy for L = Cl, and also for L = NH₃. It appears that π-bonding molecules, either non-polar like benzene or weakly polar like CO, have much less affinity for the inner tetrahedron of metal atoms, which makes adducts with eight ligands difficult or impossible to obtain in that case. Those results agree with the recently observed reactivity of met-cars.     

DFT计算结合固体NMR研究富铝SSZ-13的铝分布和Br?nsted酸性

具有菱沸石(CHA)结构的SSZ-13分子筛在甲醇制烯烃(MTO)及柴油机车尾气氨选择性催化还原(NH_3-SCR)反应中具有重要的应用,采用富铝SSZ-13可以调节MTO反应的烯烃选择性和提升NH_3-SCR的低温脱硝活性,因此SSZ-13中的铝含量和分布与对应的酸性决定了其催化性能。本文采用密度泛函理论结合固体核磁共振实验研究了富铝和富硅HSSZ-13的Al位置与Br?nsted酸强度的内在关系。通过计算取代能发现,对于孤立Al位,质子位于Al周围4个不同O位时能量差异较小,最稳定的B酸位点是O(1)―H。对于富铝SSZ-13,两个Al原子位于同一六元环的对位是Al-Si-Si-Al (NNNN)序列中最稳定的结构,而Al-Si-Al (NNN)序列中能量最优的Al分布是两个铝原子排布于六棱柱上下不同的六元环上。通过计算最稳定构型下的质子亲和势、NH3脱附能和吸附氘代乙腈后的1H NMR化学位移,发现富铝SSZ-13中含有Si(2Al)分布的NNN序列导致了其Br?nsted酸强度弱于高硅的分子筛。分峰拟合29Si魔角旋转核磁共振(MASNMR)谱图表明富铝SSZ-13中Si(2Al)的含量在43%以上,而吸附氘代乙腈后的1H MAS NMR实验显示富铝SSZ-13的桥羟基化学位移向低场移动,进一步证明富铝SSZ-13具有较弱的Br?nsted酸强度。     

Fe3O4矿石球团焙烧化学的穆斯堡尔效应研究

应用穆斯堡尔效应实验对焙烧过程中球团的矿相变化及铁离子的赋存情况进行了研究,进一步了解了焙烧化学。     

CO分子在不同类型Al2O3表面的吸附构型和电子结构

采用基于赝势平面波基组的密度泛函理论方法对CO分子在α-Al₂O₃（0001）以及γ-Al₂O₃的（100）、（110C）、（110D）表面上的吸附构型和电子结构进行系统研究.计算结果表明,CO倾向于选取C端吸附在表层Al原子上,并主要通过其5σ轨道与表面发生作用,吸附后部分电子从CO转移到底物,导致各Al₂O₃表面功函均发生不同程度的下降,与气相相比,吸附后CO分子的C-O伸缩振动频率均发生蓝移.通过对比CO在各表面上的吸附情况,可以看出CO可作为检测Al₂O₂不同类型表面活性中心的有效探针分子.     

衬底对N@C60分子电子自旋共振谱的影响

N@C₆₀内嵌富勒烯是一种在量子科技领域有较高应用前景的分子。科学家们设计了一系列以内嵌富勒烯分子为基本量子单元的量子计算机模型,而构筑这样的模型具有极高的挑战。其中,由于内嵌富勒烯分子阵列的制备通常需要合适的衬底,而衬底与分子之间的相互作用会影响甚至破坏内嵌N原子的自旋信号。因此研究和理解衬底与内嵌富勒烯分子的相互作用具有重要的意义。本文制备了高质量的N@C₆₀分子,并采用扫描隧道显微镜对其在Au(111)表面的结构及电子态进行表征。通过对比N@C₆₀分子在Au(111)、Si(111)、SiO₂表面的电子自旋共振(ESR)信号随时间及其抽真空处理的变化,表明Au原子的核自旋与内嵌N原子的电子自旋的耦合作用是Au(111)表面N@C₆₀单分子层的ESR谱中内嵌N原子的信号衰减的主要原因。     

Interaction between NO and Na, O, S, Cl on Au and Pd(111) surfaces

NO co-adsorption with X (X = Na, O, S, and Cl) on Au and Pd(111) surfaces is studied using density functional theory (DFT) calculations to get a deeper insight into the extraordinary sulfur enhanced adsorption on the Au surface. It is found that both electronegative and electropositive adatoms can enhance NO adsorption on Au(111). In Na + NO/Au(111), the strong electrostatic attraction between Na and NO dominates and stabilizes NO adsorption, though Na-induced surface negative charging weakens NO adsorption. In (O, S, Cl) + NO/Au, the electronegative atoms would induce a slight surface distortion and enhance NO adsorption accordingly. NO adsorption on Pd(111) is enhanced by Na, but weakened by electronegative species. We suggest that the unique features of noble metals, i.e., the narrow DOS at the Fermi level (E(F)) and the deep buried d-band center, should play an important role in the promotion of NO adsorption on their surface as the CO case.     

Direct-space analysis of the Si–Si bonding pattern in the π-bonded chain reconstructed Si(111)(2 × 1) surface

Atomic and bond properties of silicon atoms in the buckled π-bonded chain reconstructed Si(111)(2 × 1) system were investigated by applying the quantum theory of atoms in molecules to a number of wavefunctions from periodic ab initio calculations using a slab model for the surface and geometries from experiment. Reconstruction involves much larger surface-cell charge distortions than in the unrelaxed surface and drastic changes in the atomic polarizations of the surface layer atoms. The effect of buckling is to largely differentiate the properties (charge, energy, volume, atomic polarizations) of the two unique atoms of each surface layer. The direction of electronic charge transfer in the topmost chain (from the “up” to the “down” atom) was found to be opposite to what was claimed previously. The π conjugation is not strictly localized along the topmost layer chains (where it is also largely incomplete), but rather it extends over a 2D array of bonds between the topmost and the lower surface layers. Received: 19 July 2000 / Accepted: 2 October 2000 / Published online: 23 January 2001     

The EEL epectrum of the triplet exciton of C60 and the theoretical analysis of its vibronic structure

The electron energy loss (EEL) spectrum of the triplet exciton of the (111) surface of solid C₆₀ has been recorded at 105 K. Its rich vibronic structure is suggestive of a high degree of molecular distortion that occurs upon excitation. The static Jahn-Teller distortion of the isolated molecule, along the adiabatic potential energy surface of T₁, is determined by quantum-chemical calculations and the relaxed molecular structure is found to belong to the D_5d point group symmetry. The vibrational force field is evaluated at the distorted structure and used to simulate the EEL intensities of phonon-assisted transitions in the strong coupling regime.     

矿物质氧化物对燃煤烟气中砷/铅的吸附特性研究

选取典型的矿物质氧化物为吸附剂，在两段式固定床反应器中研究了模拟烟气气氛下吸附剂吸附As₂O₃、PbO的特性，吸附反应的原子态密度、吸附位、吸附能等通过密度泛函理论（DFT）计算获得。结果表明，CaO的砷吸附容量最大，900 ℃吸附砷容量为5.25 mg/g；其次是Fe₂O₃、MgO、Al₂O₃，吸附的砷以As³⁺和As⁵⁺的砷酸盐形式存在，高岭土和飞灰具有较大的PbO吸附容量，最大吸附容量分别为6.69和2.75 mg/g；其次是SiO₂和Al₂O₃，并且50%SiO₂/50%Al₂O₃ 混合吸附剂的铅吸附容量高于单一氧化物，吸附剂表面O原子是As₂O₃的吸附活性位点，吸附剂暴露的不饱和Si和Al原子是PbO的吸附活性位点，此外温度、烟气气氛对吸附容量和吸附产物有显著影响。     

Selective formation of cumulative double bonds (C[double bond]C[double bond]N) in the attachment of multifunctional molecules on Si(111)-7 x 7

The cumulative double bond (C[double bond]C[double bond]N), an important intermediate in synthetic organic chemistry, was successfully prepared via the selective attachment of acrylonitrile to Si(111)-7 x 7. The covalent binding of acrylonitrile on Si(111)-7 x 7 was studied using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), scanning tunneling microscopy (STM) and DFT calculations. The observation of the characteristic vibrational modes and electronic structures of the C[double bond]C[double bond]N group in the surface species demonstrates the [4 + 2]-like cycloaddition occurring between the terminal C and N atoms of acrylonitrile and the neighboring adatom-rest atom pair, consistent with the prediction of DFT calculations. STM studies further show the preferential binding of acrylonitrile on the center adatom sites of faulted halves of Si(111)-7 x 7 unit cells.     

Sandwich-like compounds based on the all-metal aromatic unit Al(4)2- and the main-group metals M (M=Li, Na, K, Be, Mg, Ca)

Inspired by the pioneering experimental characterisation of the all-metal aromatic unit Al(4)2- in the bimetallic molecules MAl4- (M=Li, Na, Cu) and by the very recent theoretical design of sandwich-type transition-metal complexes [Al4MAl4]q- (q=0-2; M=Ti, V, Cr, Zr, Nb, Mo, Hf, Ta, W), we used density functional theory (DFT) calculations (B3LYP/6-311+G(d) to design a series of novel non-transition-metal sandwich complexes based on the all-metal aromatic unit Al4(2-) and the main-group metals M (M=Li, Na, K, Be, Mg, Ca). The traditional homo-decked sandwich compounds [Al4MAl4]q- (without counterions) and (nM)q+[Al4MAl4]q- (with counterions M) (q=2-3, M=Li, Na, K, Be, Mg, Ca), although some of them are truly energy minima, have a much higher energy than many fused isomers. We thus concluded that it seems unlikely for Al4(2-) to sandwich the main-group metal atoms in the homo-decked sandwich form. Alternatively, we proposed a new type of sandwich complex, namely hetero-decked sandwich compounds [CpMAl4]q-, that are the ground-state structures for each M both with and without counterions. It was shown that with the rigid Cp- partner, the all-metal aromatic unit Al(4)2- might indeed act as a "superatom". These new types of all-metal aromatic unit-based sandwich complexes await future experimental verification.