键级守恒法研究甲酸在过渡金属上的分解机理

用键级守恒-Morse势方法研究了甲酸在Ag(111)、Ni(111)和Fe/W(110)面上极低覆盖度及较高覆盖度下的分解机理。计算结果表明,在极低覆盖度下甲酸分解通过HCOO中间体进行,其分解能力依Ag相似文献   

肼在金属表面上分解机理的理论研究

键指数归一-二次指数势(Unity Bond Index-Quadratic Exponential Potential, UBI-QEP)法被用于研究肼在Fe, Ru, Pt和Cu表面上的分解机理. 研究结果表明, 肼在金属上优先发生N—N键断裂, 金属活性顺序是Ru~Fe>Pt>Cu, 但不同金属上呈现出不同的产物选择性. 在Fe, Ru上产物主要为N2和H2, 其通过N2Hx物种形成的可能性较低, 金属活性顺序为Ru>Fe; 而在Cu, Pt上最终产物为NH3, N2和H2, 其中H2和N2的形成可能部分源于中间体物种N2H的转化, 金属的活性顺序为Pt>Cu.     

合成气在Rh（111）上转化为乙醇的机理的键级守恒研究

Rh上乙醇的生成机理,目前主要有两类.一是Ichikawa等为代表提出的“CO解离—CH_x(x=2或3)—乙酰基—乙醇”机理;另一是蔡启瑞等的“CO缔合—甲酰基(金属氧卡宾)—卡宾—乙烯酮—乙酰基—乙醇”机理.本文用Shustorovich的键级守恒—Morse势(BOC-MP)法对其进行了研究     

CO2在金属表面活化的能学方法研究

应用UBI-QEP方法, 估算了CO2-在金属表面的吸附热, 并计算了CO2在Cu(111)、Pd(111)、Fe(111)、Ni(111)表面的各种反应途径的活化能垒. 结果表明, CO2-在4种过渡金属表面相对的稳定性和CO2解离吸附的活性顺序一致,均为Fe>Ni>Cu>Pd. 说明CO2-可能是CO2解离吸附的关键中间体. 在Cu、Pd、Ni表面上, CO2解离吸附的最终产物是CO,而在Fe表面其最终会解离成C和O. 在Cu、Fe、Ni表面, CO2加氢活化是一种有效模式, 而在Pd上则不容易进行. 在Cu和Pd表面,碳酸盐物种也可能是CO2活化的重要中间体.     

MgO催化剂上甲醇分解反应机理的研究

自Greenler等用IR光谱研究了甲醇在氧化铝上的分解反应后,对各种氧化物表面上甲醇的吸附及反应的IR光谱、TPD及NMR研究已有较多报道.田丸等研究了酸性氧化铬表面上甲醇分解反应机理,认为甲醇首先形成甲氧基吸附态,然后变成甲酸根吸附态,再进一步分解为H_2、CO、H_2O及CO_2,并认为稳定的吸附态甲酸根离子在甲醇气氛下更易于分解为产物.本文对碱性MgO表面上甲醇分解反应机理进行了探讨.     

甲醇在氧化物催化剂上分解反应的研究

甲醇在氧化物催化剂上的分解反应及其机理已有不少文献报道［１－６］，前人的研究主要集中在甲醇及其反应中间体在催化剂表面的吸附形式和反应历程的动力学过程，而对于催化剂表面活性中心性质对反应机理的影响的研究不多。本文运用ＴＰＤ－ＭＳ和ＩＲ技术考察了ＭｇＯ，...     

MgO上甲醇分解的TPSR研究

本文采用ＴＰＳＲ－ＭＳ技术考察ＣＨ＿３ＯＨ在Ｍｇｏ催化剂上的分解反应，并与ＭｇＯ固体碱催化剂表面的酸碱性质进行关联。发现ＣＨ＿３ＯＨ在２３８℃、３４２℃和５３３℃处有三个脱附峰，对应地有三种表面吸附形式。这三种吸附形式与催化剂表面的酸、碱中心的强度有关，弱的酸碱中心上，ＣＨ＿３ＯＨ以分子和弱吸附的表面甲氧基形式吸附，２３８℃时的脱附峰主要为甲醇和二甲醚；较强的酸碱中心上表面甲氧基吸附较牢固，于３４２℃脱附，产生的二甲醚的相对量亦多；强酸强碱中心上吸附的甲醇易脱氢而形成表面吸附的（Ｈ＿２ＣＯ），高温５３３℃脱附时分解成ＣＯ和Ｈ＿２。     

铈改性Silicalite-1分子筛催化剂上甲醇制丙烯反应性能研究

采用浸渍法制备了Ce改性的Silicalite-1分子筛催化剂,利用XRD、N2吸脱附、Py-FTIR和NH_3-TPD等手段对催化剂进行了表征;针对甲醇转化制丙烯(MTP)反应,在常压、450℃和质量空速为9.6 h-1的反应条件下,利用连续流动固定床微型反应评价装置,考察了CeO_2负载量对CeO_2/Silicalite-1催化性能的影响。结果表明,与HZSM-5分子筛(SiO_2/Al_2O_3(molar ratio)=200)相比,Silicalite-1分子筛具有更高的丙烯选择性和催化稳定性。Ce的引入可有效调节Silicalite-1分子筛的酸性质和孔结构;合适浓度的Ce改性处理(CeO_2负载量(质量分数)为5.0%)使得Silicalite-1的强酸量降低,其丙烯选择性(质量分数)和催化稳定性分别由原来的31.9%和51 h增加到38.2%和72 h。     

甲硫醇在Cu(111)表面的解离吸附: 密度泛函理论研究

采用基于密度泛函理论的第一性原理方法和平板模型研究了CH₃SH分子在Cu(111)表面的吸附反应.系统地计算了S原子在不同位置以不同方式吸附的一系列构型, 第一次得到未解离的CH₃SH分子在Cu(111)表面顶位上的稳定吸附构型,该构型吸附属于弱的化学吸附, 吸附能为0.39 eV. 计算同时发现在热力学上解离结构比未解离结构更加稳定. 解离的CH₃S吸附在桥位和中空位之间, 吸附能为0.75-0.77 eV. 计算分析了未解离吸附到解离吸附的两条反应路径, 最小能量路径的能垒为0.57 eV. 计算结果还表明S―H键断裂后的H原子并不是以H₂分子的形式从表面解吸附而是以与表面成键的形式存在. 通过比较S原子在独立的CH₃SH分子和吸附状态下的局域态密度, 发现S―H键断裂后S原子和表面的键合强于未断裂时S原子和表面的键合.     

非水体系中甲醇在粗糙铂电极上解离吸附的表面增强拉曼 光谱研究

利用共焦显微拉曼系统和表面增强拉曼散射(SERS)效应研究了非水体系中甲醇在粗糙铂电极上的解离吸附过程。结果表明：甲醇在粗糙铂电极上解离吸附后产生了毒性中间物CO,在较负的电位区间内,H与CO共吸附于电极表面并影响CO的吸附行为,随电位正移,ν~P~t~-~C的变化可以用电化学Stark效应进行解释,而ν~C~~O的变化则是由于电化学Stark效应和CO偶极耦合的共同作用所引起的。     

清洁及氧修饰Cu（100）表面上CO2加氢制甲醇反应的能量学

分别以清洁及氧悠Ｃｕ（１００）表面作为金属态铜和部分氧化态铜的表面模拟，用键级守恒－Ｍｏｒｅｓ势法研究了两种表面上ＣＯ２加氢制甲醇反应的能量学，计算结果表明，在两种表面上，ＣＯ２加氢制甲醇反应的优势反应途径均为“ＣＯ２，ｓ→ＨＣＯＯｓ→Ｈ２ＣＯｓ→ＣＨ３Ｏｓ→ＣＨ３ＯＨｓ”与清洁铜表面上的相应基元步骤相比，在Ｃｕ（１００）－ｐ（２×２）Ｏ表面上甲醇合成反应各基元步骤具有更低的活化能；ＨＣＯＯｓ是含     

Density Functional Theoretical Studies on the Methanol Adsorption and Decomposition on Ru(0001) Surfaces

Periodic density functional theory(DFT) calculations are presented to describe the adsorption and decomposition of CH₃OH on Ru(0001) surfaces with different coverages, including p(3×2), p(2×2), and p(2×1) unit cells, corresponding to monolayer(ML) coverages of 1/6, 1/4, and 1/2, respectively. The geometries and energies of all species involved in methanol dissociation were analyzed, and the initial decomposition reactions of methanol and the subsequent dehydrogenations reactions of CH₃O and CH₂OH were all computed at 1/2, 1/4, and 1/6 ML coverage on the Ru(0001) surface. The results show that coverage exerts some effects on the stable adsorption of CH₃O, CH₂OH, and CH₃, that is, the lower the coverage, the stronger the adsorption. Coverage also exerts effects on the initial decomposition of methanol. C-H bond breakage is favored at 1/2 ML, whereas C-H and O-H bond cleavages are preferred at 1/4 and 1/6 ML on the Ru(0001) surface, respectively. At 1/4 ML coverage on the Ru(0001) surface, the overall reaction mechanism can be written as 9CH₃OH→3CH₃O+6CH₂OH+9H→6CH₂O+3CHOH+18H→7CHO+COH+CH+OH+26H→8CO+C+O+36H.     

铂钌团簇及电荷对甲醇活性的理论研究

采用密度泛函理论(DFT)对钌掺杂的铂团簇阳离子([Pt_nRu_m]⁺, m + n = 3, n ≥ 1)活化甲醇C―H和O―H键反应进行了理论研究;探讨了电荷对[Pt_nRu_m]团簇反应活性的影响。电荷分析表明:(1) [Pt₃]⁺团簇中正电荷在三个Pt原子上均匀分布;掺杂Ru原子后,正电荷主要分布在Ru原子上; (2)首先活化C―H键时[Pt_nRu_m]⁺的反应活性比[Pt_nRu_m]明显提高;首先活化O―H键时只有[Pt₃]⁺比[Pt₃]团簇的反应活性有明显提高。本研究可为金属团簇调控的C―H键和O―H键的活化提供更深入的理解。     

First-principles Study of Adsorption and Dissociation of Methanol on the Pt(100) Surface

Using first-principles calculations, we studied the interaction of methanol with the Pt(100) surface based on generalized gradient approximation. We found that top sites of Pt(100) surface are the favored adsorptive positions in energy, and methanol molecule interacts with the Pt surface through oxygen atoms. Moreover, we also explored the possible dissociation pathways of methanol on the Pt surface, and suggested that the products of dissociation can be controlled by the external manipulation.     

金属盐添加剂对甲醇羰基化反应的助催化研究

以[Rh(CO)2Cl]2为催化剂,以Sn、Pb、Cr、Zr金属盐作为添加剂,在催化甲醇羰基化制乙酸的反应中系统考察了不同添加剂对反应的影响.试验证明,含有添加剂的反应体系具有更高的催化活性和选择性,其中乙酸的时空收率最高达到40mol/(L·h)以上.     

Molecular Organometallic Chemistry on Surfaces: Reactivity of Metal Carbonyls on Metal Oxides

Metal carbonyls react on metal oxide surfaces to give a wide range of structures analogous to those of known compounds. The reactions leading to formation of surface-bound metal carbonyls are explained by known molecular organometallic chemistry and the functional group chemistry of the surfaces. The reaction classes include formation of acid-base adducts as the oxygen of a carbonyl group donates an electron pair to a Lewis acidic center; nucleophilic attack at CO ligands by basic surface hydroxyl groups or O^2? ions; ion-pair formation by deprotonation of hydrido carbonyls to give carbonylate ions; interaction of bifunctional complexes with surface acid-base pair sites such as [Mg^2⊕O^2?]; and oxidative addition of surface hydroxyl groups to metal clusters. The reactions of surface-bound organometallic species include redox condensation and cluster formation on basic surfaces (paralleling the reactions in basic solution) as well as oxidation of mononuclear metal complexes and oxidative fragmentation of metal clusters by reaction with surface hydroxyl groups. Most supported metal carbonyls are unstable at high temperatures, but some, including osmium carbonyl cluster anions on the basic MgO surface, are strongly stabilized in the presence of CO and are precursors of catalysts for CO hydrogenation at 550 K.     

甲醇在CeO2担载Pd催化剂上分解机理的研究

采用原位红外(in-situFTIR)技术对甲醇在CeO₂和Pd/CeO₂催化剂上的吸附和反应进行了研究,提出一个新的甲醇分解反应机理模型.甲醇在CeO₂上容易吸附并结合其晶格氧生成甲酸盐物种,而甲醇分解的产物氢被Pd活化后,溢流到CeO₂上促进了甲酸盐物种的分解.Cl^-的存在加强了Pd/CeO₂催化剂与氢的相互作用,Pd和CeO₂通过对氢和氧物种的作用对甲醇分解反应的过程表现出协同效应.     

无表面活性剂条件下一锅法制备金属/氧化锌复合材料用于催化二氧化碳加氢制甲醇反应

Catalytic hydrogenation of CO₂ to methanol is an important chemical process owing to its contribution in alleviating the impacts of the greenhouse effect and in realizing the requirement for renewable energy sources. Owing to their excellent synergic functionalities and unique optoelectronic as well as catalytic properties, transition metal/ZnO (M/ZnO) nanocomposites have been widely used as catalysts for this reaction in recent years. Development of size-controlled synthesis of metal/oxide complexes is highly desirable. Further, because it is extremely difficult to achieve the strong-metal-support-interaction (SMSI) effect when the M/ZnO nanocomposites are prepared via physical methods, the use of chemical methods is more favorable for the fabrication of multi-component catalysts. However, because of the requirement for an extra H₂ reduction step to obtain the active metallic phase (M) and surfactants to control the size of nanoparticles, most M/ZnO nanocomposites undergo two- or multi-step synthesis, which is disadvantageous for the stable catalytic performance of the M/ZnO nanocomposites. In this work, we demonstrate facile one-pot synthesis of M/ZnO (M = Pd, Au, Ag, and Cu) nanocomposites in refluxed ethylene glycol as a solvent, without using any surfactants. During the synthesis process, Pd and ZnO species can stabilize each other from further aggregation by reducing their individual surface energies, thereby achieving size control of particles. Besides, NaHCO₃ serves as a size-control tool for Pd nanoparticles by adjusting the alkaline conditions. Ethylene glycol serves as a mild reducing agent and solvent owing to its capacity to reduce Pd ions to generate Pd crystals. The nucleation and growth of Pd particles are achieved by thermal reduction, while the ZnO nanocrystals are formed by thermal decomposition of Zn(OAc)₂. X-ray diffraction patterns of the M/ZnO and ZnO were analyzed to study the phase of the nanocomposites, and the results show that no impurity phase was detected. Transmission electron microscopy (TEM) was used to study the morphology and structural properties. In addition, X-ray photoelectron spectroscopy analysis was performed to further confirm the formation of M/ZnO hybrid materials, and the results confirm SMSI between Pd and ZnO. Inductively coupled plasma mass spectrometry was used to check the actual elemental compositions, and the results show that the detected atomic ratios of Pd/Zn were consistent with the values in the theoretical recipe. To investigate the effects of the Pd/Zn molar ratios and the added amount of NaHCO₃ on Pd size, the average sizes of Pd particles were calculated, and the results were confirmed by TEM observation. The Cu/ZnO/Al₂O₃ composite is a widely known catalyst for hydrogenation of CO₂ to methanol, and other M/ZnO composites are also catalytic for this reaction. Therefore, different M/ZnO hybrids were further studied as catalysts for hydrogenation of CO₂ to methanol, among which Pd/ZnO (1 : 9) demonstrated the best performance (30% CO₂ conversion, 69% methanol selectivity, and 421.9 g_methanol·(kg catalyst·h)^-1 at 240 ℃ and 5 MPa. The outstanding catalytic performance may be explained by the following two factors: first, Pd is a good catalyst for the dissociation of H₂ to give active H atoms, and second, SMSI between Pd and ZnO favors the formation of surface oxygen vacancies on ZnO. Moreover, most M/ZnO composites exhibit excellent performance in methanol selectivity, especially the Au/ZnO catalyst, which has the highest methanol selectivity (82%) despite having the lowest CO₂ conversion. Hopefully, this work would provide a simple route for synthesis of M/ZnO nanocomposites with clean surfaces for catalysis.