Diffusion-controlled luminescence quenching in metal-organic frameworks

Diffusion-controlled luminescence quenching of a phosphorescent metal-organic framework built from the Ru(bpy)(3)(2+)-derived bridging ligand (MOF-1) was studied using a series of amines of different sizes as quenchers. The dynamics of amine diffusion into solvent-filled MOF-1 channels was probed by modeling time-dependent luminescence quenching data, which provide quantitative diffusion coefficients for the amine quenchers. Triethylamine, tripropylamine, and tributylamine were found to follow Fickian diffusion with a diffusivity of (1.1 ± 0.2) × 10(-13), (4.8 ± 1.2) × 10(-14), and (4.0 ± 0.4) × 10(-14) m(2)/s, respectively. Diisopropylethylamine (DIPEA), on the other hand, was found to be too large to enter the MOF channels. Despite its size, 4-MeOPhNPh(2) can enter the MOF channels via a slow, complicated framework/guest intercalation process to result in extensive framework distortion as revealed by powder X-ray diffraction. This work represents the first quantitative study of the dynamics of molecular diffusion into solvent-filled MOF channels. Such quantitative information on molecular diffusion in MOFs is of fundamental importance to many of their potential applications (e.g., heterogeneous catalysis).     

抗肿瘤药物在金属有机骨架中的装载及体外释放

以三乙胺直接加入法制备金属-有机骨架MOF-5, 采用X射线粉末衍射(XRD), 红外光谱(IR)和热重分析(TG)对所得样品进行表征. 分别以辣椒素和5-氟尿嘧啶(5-Fluouourail, 5-FU)为模型药物, 研究了MOF-5对2种药物的载药及体外释药性能. 通过将所得样品的XRD和IR谱图与标准谱图比对确定了样品的结构. TG结果表明, 所制备的MOF-5热稳定性良好. MOF-5对辣椒素的最高载入量达0.592 g/g载体, 对5-FU的最高载入量为0.315 g/g载体, 两种载药体系的体外释药均为明显的两相模式. 体外细胞毒性实验结果表明, MOF-5具有良好的生物相容性.     

Reversible interpenetration in a metal-organic framework triggered by ligand removal and addition

Caging cages: Crystals of a metal-organic framework, MOF-123 [Zn(7) O(2) (NBD)(5) (DMF)(2) ] have a three-dimensional porous structure in which DMF ligands (see picture, pink) protrude into small channels. Removal of these ligands triggers the transformation of this MOF to the doubly interpenetrating form, MOF-246 [Zn(7) O(2) (NBD)(5) ]. Moreover, addition of DMF into MOF-246 triggers reverse transformation to give MOF-123. NBD=2-nitrobenzene-1,4-dicarboxylate.     

A Surfactant‐Free and Scalable General Strategy for Synthesizing Ultrathin Two‐Dimensional Metal–Organic Framework Nanosheets for the Oxygen Evolution Reaction

Metal–organic framework (MOFs) two‐dimensional (2D) nanosheets have many coordinatively unsaturated metal sites that act as active centres for catalysis. To date, limited numbers of 2D MOFs nanosheets can be obtained through top‐down or bottom‐up synthesis strategies. Herein, we report a 2D oxide sacrifice approach (2dOSA) to facilely synthesize ultrathin MOF‐74 and BTC MOF nanosheets with a flexible combination of metal sites, which cannot be obtained through the delamination of their bulk counterparts (top‐down) or the conventional solvothermal method (bottom‐up). The ultrathin iron–cobalt MOF‐74 nanosheets prepared are only 2.6 nm thick. The sample enriched with surface coordinatively unsaturated metal sites, exhibits a significantly higher oxygen evolution reaction reactivity than bulk FeCo MOF‐74 particles and the state‐of‐the‐art MOF catalyst. It is believed that this 2dOSA could provide a new and simple way to synthesize various ultrathin MOF nanosheets for wide applications.     

银纳米粒子修饰的二维金属-有机框架纳米片用于光热增强银离子释放抗菌

近年来,二维(2D)金属-有机框架(MOF)纳米复合材料被广泛的应用于生物医学领域,尤其是在抗菌方面。在此,我们通过光照诱导还银离子成功在二维MOF纳米片上生长银纳米粒子,得到了一种银纳米粒子(Ag NPs)修饰的二维Zr-Fc-MOF (MOF-Ag)纳米片,并将其用于光热增强Ag⁺释放抗菌治疗。通过水热法和超声处理合成MOF纳米片,然后通过原位光辐照诱导还原在MOF纳米片上生长Ag NPs。系列表征结果表明Ag NPs成功负载到MOF纳米片上。聚乙烯吡咯烷酮(PVP)的修饰不仅可以增强MOF-Ag在溶液中的稳定性,还可以增强它的生物相容性。在近红外激光(NIR)照射下,MOF纳米片可以在短时间升温,而温度的升高可以加速Ag NPs在溶液中氧化为银离子。通过细菌生长曲线、菌落相对数和细菌形态变化等实验表明PVP@MOF-Ag纳米片具有优异的广谱杀菌性能。此外,2D MOF纳米片良好的光热性能不仅可以增强Ag⁺的释放,还可以增强细胞膜的通透性,随后进入细菌中的Ag⁺可以诱导内源性活性氧的产生,从而引发细菌的氧化应激,实现高效抗菌。基于良好的体外抗菌性能,进一步将PVP@MOF-Ag纳米片用于小鼠伤口愈合,在此期间PVP@MOF-Ag纳米片表现出良好的治疗效果和生物安全性。我们的研究结果表明,PVP@MOF-Ag纳米片可以作为光热增强Ag⁺释放抗菌治疗和伤口愈合的有效平台。     

Assessing the purity of metal-organic frameworks using photoluminescence: MOF-5, ZnO quantum dots, and framework decomposition

Photoluminescence (PL) spectroscopy was used to characterize nanoscale ZnO impurities, amine-donor charge-transfer exciplexes, and framework decomposition in samples of MOF-5 prepared by various methods. The combined results cast doubt on previous reports describing MOF-5 as a semiconductor and demonstrate that PL as a tool for characterizing MOF purity possesses advantages such as simplicity, speed, and sensitivity over currently employed powder XRD MOF characterization methods.     

A pillared metal-organic framework incorporated with 1,2,3-triazole moieties exhibiting remarkable enhancement of CO(2) uptake

The replacement of the pillar ligand, 4,4'-bipyridine, in the prototypal pillared MOF, MOF-508, with the custom-designed ligand, 4,4'-(2H-1,2,3-triazole-2,4-diyl)dipyridine, affords a porous metal-triazolate framework, MTAF-3, which demonstrates remarkable enhancement of CO(2) uptake capacity by a factor of ～3 compared to the parent MOF-508.     

Assembly of metal-organic frameworks from large organic and inorganic secondary building units: new examples and simplifying principles for complex structures

The secondary building unit (SBU) has been identified as a useful tool in the analysis of complex metal-organic frameworks (MOFs). We illustrate its applicability to rationalizing MOF crystal structures by analysis of nine new MOFs which have been characterized by single-crystal X-ray diffraction. Tetrahedral SBUs in Zn(ADC)(2).(HTEA)(2) (MOF-31), Cd(ATC).[Cd(H(2)O)(6)](H2O)(5) (MOF-32), and Zn(2)(ATB)(H2O).(H2O)(3)(DMF)(3) (MOF-33) are linked into diamond networks, while those of Ni(2)(ATC)(H(2)O)(4).(H2O)(4) (MOF-34) have the structure of the Al network in SrAl(2). Frameworks constructed from less symmetric tetrahedral SBUs have the Ga network of CaGa(2)O(4) as illustrated by Zn(2)(ATC).(C(2)H(5)OH)(2)(H2O)(2) (MOF-35) structure. Squares and tetrahedral SBUs in Zn(2)(MTB)(H2O)(2).(DMF)(6)(H2O)(5) (MOF-36) are linked into the PtS network, which is the simplest structure type known for the assembly of these shapes. The octahedral SBUs found in Zn(2)(NDC)(3).[(HTEA)(DEF)(ClBz)](2) (MOF-37) form the most common structure for linking octahedral shapes, namely, the boron network in CaB(6). New structure types for linking triangular and trigonal prismatic SBUs are found in Zn(3)O(BTC)(2).(HTEA)(2) (MOF-38) and Zn(3)O(HBTB)(2)(H2O).(DMF)(0.5)(H2O)(3) (MOF-39). The synthesis, crystal structure, and structure analysis using the SBU approach are presented for each MOF.     

Cu-bipy-BTC衍生碳基材料的制备及其氧还原电催化性能

制备高效、廉价的氧还原(ORR)电催化剂是燃料电池的技术关键. 本文采用水热法制备出前驱体金属有机骨架化合物（MOF：Cu-bipy-BTC,bipy=2,2′-联吡啶,BTC=均苯三甲酸）后,再高温煅烧得到碳基材料MOF-800. 采用扫描电镜、X射线衍射、红外光谱、氮气吸附/脱附等温线和X射线光电子谱表征了材料的形貌和结构特征;采用线性扫描伏安曲线、i-t曲线等考察了材料的氧还原催化性能. 结果表明,与前驱体Cu-bipy-BTC相比,MOF-800含有大量的微孔(0.5 ~ 1.3 nm),为铜、氮掺杂多孔碳. MOF-800的电荷转移阻抗为10.6 Ω,比Cu-bipy-BTC降低了97.2%,具有优良的导电性. MOF-800具有优异的ORR催化性能,其起始电位约为-0.04 V(vs. Ag/AgCl),其电子转移数接近4. 铜、氮掺杂的多孔碳结构导电性好,高含量的吡啶氮、吡咯氮和石墨氮提供了大量催化活性位点(C-N, Cu-N_x),是MOF-800具有高氧还原电催化性能的主要原因. 本研究可为煅烧Cu-bipy-BTC制备碳基材料用于燃料电池修饰阴极提供技术支撑与理论依据.     

Mesoporous Metal–Organic Frameworks for Catalytic RNA Deprotection and Activation

A metal–organic framework (MOF) with mespores (2 to 50 nm) allows the inclusion of large biomolecules, such as nucleic acids. However, chemical reaction on the nucleic acids, to further regulate their bioactivity, is yet to be demonstrated within MOF pores. Here, we report the deprotection of carbonate protected RNA molecules (21 to 102 nt) to restore their original activity using a MOF as a heterogeneous catalyst. Two MOFs, MOF-626 and MOF-636 are designed and synthesized, with mesopores of 2.2 and 2.8 nm, respectively, carrying isolated metal sites (Ni, Co, Cu, Pd, Rh and Ru). The pores favor the entrance of RNA, while the metal sites catalyze C−O bond cleavage at the carbonate group. Complete conversion of RNA is achieved by Pd-MOF-626, 90 times more efficiently than Pd(NO₃)₂. MOF crystals are also removable from the aqueous reaction media, leaving a negligible metal footprint, 3.9 ppb, only 1/55 of that using homogeneous Pd catalysts. These features make MOF potentially suited for bioorthogonal chemistry.     

Tuning the hydrogen storage capacity of MOF-650 by Mg2+/Ca2+ substitution and B,N co-doped atoms: Grand canonical Monte Carlo simulation and periodic density functional theory

This study used periodic density functional theory and grand canonical Monte Carlo simulations to investigate the effects of the co-doping of B and N atoms and substituting Zn²⁺ with Mg²⁺ or Ca²⁺ in the organic linker groups of MOF-650. The functionalization increased the polarity of the organic groups, stabilizing the interaction between the MOF and hydrogen molecules. The highest average binding energy of the adsorbed hydrogen in MOF-650 NB-C7-azulene-Mg was calculated to be −4.75 to 5.40 kcal/mol for the α adsorption sites. Using the substitution of NB azulene and metal cations being Mg²⁺ or Ca²⁺, The hydrogen storage capacity of functionalized MOF-650 was increased to 22 mg/g at 90 bar/298 K, implying the modification strategy of MOF-650 would strengthen the interaction between MOF frameworks and hydrogen molecules.     

MOF/graphite oxide hybrid materials: exploring the new concept of adsorbents and catalysts

Two types of metal-organic framework (MOF)/graphite oxide hybrid materials were prepared. One is based on a zinc-containing, MOF-5 and the other on a copper-containing HKUST-1. The materials are characterized by X-ray diffraction, sorption of nitrogen, thermal analyses, Fourier Transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). Their features are compared to the ones of the parent materials. The water stability and ammonia adsorption capacity of the hybrid materials were also evaluated. It was found that the latter compounds exhibit features similar to the ones of the parent MOF. In most cases, their porosity increased compared to the one calculated considering the physical mixture of MOF and GO. This new porosity likely located between the two components of the hybrid materials is responsible for the enhanced ammonia adsorption capacity of the compounds. However, for both the zinc-based and the copper-based materials (MOFs and hybrid materials), a collapse of the framework was observed as a result of ammonia adsorption. This collapse is caused by the interactions of ammonia with the metallic centers of MOFs either by hydrogen bonding (zinc-based materials) or coordination and subsequent complexation (copper-based materials). Whereas the MOF-5 based compounds collapse in presence of humidity, the copper-based materials are stable.     

Chromatography in a single metal-organic framework (MOF) crystal

Millimeter-sized single MOF-5 crystals are used as "chromatographic columns" to effectively separate mixtures of organic dyes. Remarkably, owing to the nanoscopic pore dimensions and the molecular-level interactions between the migrating molecules and the MOF scaffold, the separations occur over a distance of only a few hundred micrometers which is unambiguously confirmed by fluorescence confocal microscopy.     

Single-crystal Bi2S3 nanosheets growing via attachment-recrystallization of nanorods

High-quality Bi(2)S(3) discrete single-crystal nanosheets with orthorhombic structure have been synthesized through the thermal decomposition of a single-source precursor, Bi(S(2)CNEt(2))(3), in amine media. The morphology evolution reveals that the Bi(2)S(3) nanosheets are developed through the assembly of nanorods, and an attachment-recrystallization growth mechanism is proposed for the formation of nanosheets with the use of nanorods as building blocks. High-resolution transmission electron microscopy studies reveal that the nanosheets have the largest exposed surface of (100) facets. The effects of experimental variables, such as the reaction temperature, time, precursor concentration, and media, on the morphology of the obtained nanocrystals have been systematically investigated in which the amine has served as the solvent, surfactant, and electron donor.     

Metal-organic frameworks with exceptionally high capacity for storage of carbon dioxide at room temperature

Metal-organic frameworks (MOFs) show high CO2 storage capacity at room temperature. Gravimetric CO2 isotherms for MOF-2, MOF-505, Cu3(BTC)2, MOF-74, IRMOFs-11, -3, -6, and -1, and MOF-177 are reported up to 42 bar. Type I isotherms are found in all cases except for MOFs based on Zn4O(O2C)6 clusters, which reveal a sigmoidal isotherm (having a step). The various pressures of the isotherm steps correlate with increasing pore size, which indicates potential for gas separations. The amine functionality of the IRMOF-3 pore shows evidence of relatively increased affinity for CO2. Capacities qualitatively scale with surface area and range from 3.2 mmol/g for MOF-2 to 33.5 mmol/g (320 cm3(STP)/cm3, 147 wt %) for MOF-177, the highest CO2 capacity of any porous material reported.     

Robust chromophore-integrated MOFs as highly visible-white-light active and tunable size-selective photocatalysts towards benzothiazoles

Visible-light heterogeneous photocatalyst with high activity and selectivity is crucial for the development of organic transformations, but remains a formidable challenge. Herein, a simple and effective strategy was developed to integrate tetrazine moiety, a visible light active unit, into robust metal-organic frameworks (2D MOF-1(M), M = Co, Mn, Zn, and 3D MOF-2(Co)). MOF-1 series are isomorphous 2D porous frameworks, and MOF-2(Co) displays 3D porous framework. Interestingly, benefiting from the oxidative active species of O₂^•−, these MOFs all exhibit obviously highly enhanced photocatalytic activities toward the straightforward condensation of o-aminothiophenol and aromatic aldehydes at room temperature in EtOH under visible-white-light irradiation. Notably, compared to 3D MOF, the 2D layered MOF-1(Co) exhibited more excellent catalytic activity with a wide range of substrates possessing preeminent tolerance of steric hindrance. Most impressively, MOF-1(Co) can be recycled at least five times without significant loss of catalytic activity or crystallinity, exhibiting excellent stability and reusability. This study sheds light on the wide-ranging prospects of visible light active 2D MOFs as green photocatalysts for the preparation of fine chemicals     

Gaseous species as reaction tracers in the solvothermal synthesis of the zinc oxide terephthalate MOF-5

Gaseous species emitted during the zinc oxide/zinc hydroxide 1,4-benzenedicarboxylate metal organic framework synthesis (MOF-5, MOF-69c) have been used to investigate the reaction scheme that leads to the framework creation. Changes of the gas-phase composition over time indicate that the decomposition of the solvent diethylformamide occurs at least via two competing reaction pathways that can be linked to the reaction's overall water and pH management. From isotope exchange experiments, we deduce that one of the decomposition pathways leads to the removal of water from the reaction mixture, which sets the conditions when the synthesis of an oxide-based (MOF-5) instead of an hydroxide-based MOF (MOF-69c) occurs. A quantitative account of most reactants and byproducts before and after the MOF-5/MOF-69c synthesis is presented. From the investigation of the reaction intermediates and byproducts, we derive a proposal of a basic reaction scheme for the standard synthesis zinc oxide carboxylate MOFs.     

The interaction of water with MOF-5 simulated by molecular dynamics

Force field parameters for use with metal-organic framework-5 (MOF-5 or IRMOF-1) are presented. Flexibility within the framework is included in this model, so that structural changes upon interaction with adsorbate molecules can be observed and quantified. The model was validated by comparing simulated lattice parameters of pure MOF-5 with X-ray diffraction results. For the first time, molecular dynamics simulations have been performed that show how water interacts with MOF-5. The framework is stable at water contents up to 2.3% by mass, but distortion in the lattice structure is already evident. At water contents of 3.9% and higher, the framework collapses because of the replacement of MOF O atoms by water O atoms in the Zn coordination shells. As a result, inorganic MOF O atoms are no longer coordinated by four Zn ions, and benzene dicarboxylate linkers are no longer tethered to Zn centers.     

Tuning the Stacking Modes of Ultrathin Two-Dimensional Metal–Organic Framework Nanosheet Membranes for Highly Efficient Hydrogen Separation

Two-dimensional (2D) metal–organic framework (MOF) membranes are considered potential gas separation membranes of the next generation due to their structural diversity and geometrical functionality. However, achieving a rational structure design for a 2D MOF membrane and understanding the impact of MOF nanosheet stacking modes on membrane separation performance remain challenging tasks. Here, we report a novel kind of 2D MOF membrane based on [Cu₂Br(IN)₂]_n (IN=isonicotinato) nanosheets and propose that synergetic stacking modes of nanosheets have a significant influence on gas separation performance. The stacking of the 2D MOF nanosheets is controlled by solvent droplet dynamic behaviors at different temperatures of drop coating. Our 2D MOF nanosheet membranes exhibit high gas separation performances for H₂/CH₄ (selectivity >290 with H₂ permeance >520 GPU) and H₂/CO₂ (selectivity >190 with H₂ permeance >590 GPU) surpassing the Robeson upper bounds, paving a potential way for eco-friendly H₂ separation.     

二维金属有机框架纳米片的合成及在超电容和电催化领域的应用

二维金属有机框架(2D MOF)纳米片具有丰富且易暴露的表面活性位点、 高度有序的孔结构以及多样且可调的化学成分, 在电化学能量存储与转化中有利于降低反应电位, 提高扩散速率和反应速率. 关于2D MOF应用于电化学存储与转化的研究已有大量报道. 本文综合评述了近几年2D MOF的合成进展及其在超电容(SC)、 析氧反应(OER)、 析氢反应(HER)、 氧还原反应(ORR)和二氧化碳还原反应(CRR)的应用, 并对2D MOF作为电催化材料的研究现状和发展前景进行了总结与展望.