High current density electrodeposition from silver complex ionic liquids

Liquid metal salts are electrolytes with the highest possible metal concentration for electrodeposition, because the metal ion is an integral part of the solvent. This paper introduces the new ionic silver complexes [Ag(MeCN)(4)](2)[Ag(Tf(2)N)(3)], [Ag(MeCN)][Tf(2)N] and [Ag(EtIm)(2)][Tf(2)N], where MeCN stands for acetonitrile, EtIm for 1-ethylimidazole and Tf(2)N is bis(trifluoromethylsulfonyl)imide. These complexes have been characterized by differential scanning calorimetry, single crystal X-ray crystallography, thermogravimetrical analysis, Raman spectroscopy and cyclic voltammetry. [Ag(MeCN)(4)](2)[Ag(Tf(2)N)(3)] is a room temperature ionic liquid. Smooth silver layers of good quality could be deposited from it, at current densities of up to 25 A dm(-2) in unstirred solutions. [Ag(EtIm)(2)][Tf(2)N] melts at 65 °C and can be used as an electrolyte for silver deposition above this temperature. [Ag(MeCN)][Tf(2)N] has a melting point that is too high to be useful in electrodeposition. Addition of thiourea or 1H-benzotriazole to the electrolyte decreased the surface roughness of the silver coatings. The morphology of the metal layers was investigated by atomic force microscopy (AFM). Adsorption of 1H-benzotriazole on the silver metal surface has been proven by Raman spectroscopy. This work shows the usefulness of additives in improving the quality of metal films electrodeposited from ionic liquids.     

Evidence for the formation of UO2(NO3)4(2-) in an ionic liquid by EXAFS

The complexation between uranium(vi) and nitrate ions in a hydrophobic ionic liquid (IL), namely [BMI][NO(3)] (BMI = 1-butyl-3-methylimidazolium(+)), is investigated by EXAFS spectroscopy. It was performed by dissolution of uranyl nitrate UO(2)(NO(3))(2)·6H(2)O or UO(2)(Tf(2)N)(2) (Tf(2)N = bis(trifluoromethylsulfonyl)imide (CF(3)SO(2))(2)N(-)). The formation of the complex UO(2)(NO(3))(4)(2-) is evidenced.     

Nucleophilicity in ionic liquids. 2.(1) Cation effects on halide nucleophilicity in a series of bis(trifluoromethylsulfonyl)imide ionic liquids

In this work, the nucleophilicities of chloride, bromide, and iodide have been determined in the ionic liquids [bmim][N(Tf)(2)], [bm(2)im][N(Tf)(2)], and [bmpy][N(Tf)(2)] (where bmim = 1-butyl-3-methylimidazolium, bm(2)im = 1-butyl-2,3-dimethylimidazolium, bmpy = 1-butyl-1-methylpyrrolidinium, and N(Tf)(2) = bis(trifluoromethylsulfonyl)imide). It was found that in the [bmim](+) ionic liquid, chloride was the least nucleophilic halide, but that changing the cation of the ionic liquid affected the relative nucleophilicities of the halides. The activation parameters DeltaH(), DeltaS(), and DeltaG() have been estimated for the reaction of chloride in each ionic liquid, and compared to a similar reaction in dichloromethane, where these parameters were found for reaction by both the free ion and the ion pair.     

Copper(I)-containing ionic liquids for high-rate electrodeposition

New metal-containing ionic liquids [Cu(CH(3)CN)(n)][Tf(2)N] (n=2, 4; Tf(2)N=bis(trifluoromethylsulfonyl)- amide) have been synthesised and used as a non-aqueous electrolyte for the electrodeposition of copper at current densities greater than 25 A dm(-2). The tetrahedral copper(I)-containing cation in [Cu(CH(3)CN)(4)][Tf(2)N] is structurally analogous to quaternary ammonium and phosphonium ionic liquids and overcomes problems of metal solubility and mass transport. Two CH(3)CN ligands are removed at elevated temperatures to give [Cu(CH(3)CN)(2)][Tf(2)N], which can be used as a concentrated non-aqueous electrolyte. The structural and electrochemical characterisation of these compounds is described herein.     

Ionic liquids of cationic sandwich complexes

Simple cationic sandwich complexes that contained alkyl- or halogen substituents provided ionic liquids (ILs) with the bis(perfluoroalkanesulfonyl)imide anion. Ferrocenium- and cobaltocenium ILs [M(C(5)H(4)R(1))(C(5)H(4)R(2))][Tf(2)N] (M=Fe, Co) and arene-ferrocenium ILs [Fe(C(5)H(4)R(1))(C(6)H(5)R(2))][Tf(2)N] were prepared and their physical properties were investigated. A detailed comparison of their thermal properties revealed the effects of molecular symmetry and substituents on their melting points. Their viscosity increased on increasing the length of the substituent on the cation and the perfluoroalkyl chain length on the anion. Upon cooling, ILs with low viscosities exhibited crystallization, whereas those with higher viscosities tended to exhibit glass transitions. Most of these salts showed phase transitions in the solid state. A magnetic-switching phenomenon was observed for the paramagnetic ferrocenium IL, which was associated with a liquid/solid transformation, based on the magnetic anisotropy of the ferrocenium cation. (57)Fe M?ssbauer spectroscopy was applied to [Fe(C(5)H(4)nBu)(2)][Tf(2)N] to investigate the vibrational behavior of the iron atom in the crystal and glassy states of the ferrocenium IL.     

微波辅助合成有机膦功能化离子液体及对稀土离子的萃取

用微波辐射法,合成了5个含有机膦氧基团的离子液体：1-丙基-3-(3-二苯基氧膦基)丙基咪唑双(三氟甲基磺酰基)亚胺盐([PImC3P(O)Ph2][Tf2N])、1-己基-3-(3-二苯基氧膦基)丙基咪唑双(三氟甲基磺酰基)亚胺盐([HImC3P(O)Ph2][Tf2N])、1-丙基-3-(3-苯基乙氧基氧膦基)丙基咪唑双(三氟甲基磺酰基)亚胺盐([PImC3P(O)Ph(OEt)][Tf2N])、1-己基-3-(3-苯基乙氧基氧膦基)丙基咪唑双(三氟甲基磺酰基)亚胺盐([HImC3P(O)Ph(OEt)][Tf2N])和(3-苯基乙氧基氧膦基)丙基三乙胺双(三氟甲基磺酰基)亚胺盐([TENC3P(O)Ph(OEt)][Tf2N])。 用31P NMR、1H NMR、13C NMR、MS及FT-IR对产物结构进行了表征。 研究了这类离子液体对稀土Nd(III)的萃取性能。 结果表明,这类功能化离子液体可作为单一组分萃取稀土而无需加入有机稀释剂,离子液体结构对萃取效率影响很大,相同条件下季铵盐型结构的离子液体[TENC3P(O)Ph(OEt)][Tf2N]对稀土Nd(Ⅲ)的萃取效率最高。 稀土溶液pH值对萃取效率影响显著,近中性条件下(pH=6.63),对稀土Nd(Ⅲ)的萃取率最高。 用pH=1.00的盐酸溶液可以较好的从离子液体相反萃Nd(Ⅲ),反萃率可达94%。     

Wide control of proton conductivity in porous coordination polymers

The proton conductivities of the porous coordination polymers M(OH)(bdc-R) [H(2)bdc = 1,4-benzenedicarboxylic acid; M = Al, Fe; R = H, NH(2), OH, (COOH)(2)] were investigated under humid conditions. Good correlations among pK(a), proton conductivity, and activation energy were observed. Fe(OH)(bdc-(COOH)(2)), having carboxy group and the lowest pK(a), showed the highest proton conductivity and the lowest activation energy in this system. This is the first example in which proton conductivity has been widely controlled by substitution of ligand functional groups in an isostructural series.     

Electrodeposition of nano- and microcrystalline aluminium in three different air and water stable ionic liquids.

The present work shows, for the first time, a comparative experimental study on the electrodeposition of aluminium in three different water and air stable ionic liquids, namely 1-butyl-1-methylpyrrolidinium-bis(trifluoromethylsulfonyl)imide ([BMP]Tf2N), 1-ethyl-3-methylimidazolium-bis(trifluoromethylsulfonyl)imide ([EMIm] Tf2N), and trihexyl-tetradecyl-phosphoniumbis(trifluoromethylsulfonyl)imide (P(14,6,6,6) Tf2N). The ionic liquids [BMP]Tf2N and [EMIm]Tf2N show biphasic behaviour in the AlCl3 concentration range from 1.6 to 2.5 mol L(-1) and 2.5 to 5 mol L(-1), respectively. The biphasic mixtures become monophasic at temperatures >/=80 degrees C. It was found that nanocrystalline aluminium can be electrodeposited in the ionic liquid [BMP]Tf2N saturated with AlCl3. The deposits obtained are generally uniform, dense, shining, and adherent with very fine crystallites in the nanometer size regime. However, coarse cubic-shaped aluminium particles in the micrometer range are obtained in the ionic liquid [EMIm]Tf2N. In this liquid the particle size significantly increases as the temperature rises. A very thin, mirrorlike aluminium film containing very fine crystallites of about 20 nm is obtained in the ionic liquid [trihexyl-tetradecyl-phosphonium]Tf(2)N at room temperature. At 150 degrees C, the average grain size is found to be 35 nm.     

Measurement of SO2 solubility in ionic liquids

Measurements of the solubility of sulfur dioxide (SO(2)) in the ionic liquids 1-n-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([hmim][Tf(2)N]) and 1-n-hexyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide ([hmpy][Tf(2)N]) at temperatures from 25 to 60 degrees C and pressures up to 4 bar indicate that large amounts (up to 85 mol %) of SO(2) dissolve in ionic liquids by simple physical absorption.     

Electrodeposition of Al in 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ionic liquids: in situ STM and EQCM studies

In the present paper, the electrodeposition of Al on flame-annealed Au(111) and polycrystalline Au substrates in two air- and water-stable ionic liquids namely, 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl)amide, [Py(1,4)]Tf(2)N, and 1-ethyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)amide, [EMIm]Tf(2)N, has been investigated by in situ scanning tunneling microscopy (STM), electrochemical quartz crystal microbalance (EQCM), and cyclic voltammetry. The cyclic voltammogram of aluminum deposition and stripping on Au(111) in the upper phase of the biphasic mixture of AlCl(3)/[EMIm]Tf(2)N at room temperature (25 degrees C) shows that the electrodeposition process is completely reversible as also evidenced by in situ STM and EQCM studies. Additionally, a cathodic peak at an electrode potential of about 0.55 V vs Al/Al(III) is correlated to the aluminum UPD process that was evidenced by in situ STM. A surface alloying of Al with Au at the early stage of deposition occurs. It has been found that the Au(111) surface is subject to a restructuring/reconstruction in the upper phase of the biphasic mixture of AlCl(3)/[Py(1,4)]Tf(2)N at room temperature (25 degrees C) and that the deposition is not fully reversible. Furthermore, the underpotential deposition of Al in [Py(1,4)]Tf(2)N is not as clear as in [EMIm]Tf(2)N. The frequency shift in the EQCM experiments in [Py(1,4)]Tf(2)N shows a surprising result as an increase in frequency and a decrease in damping with bulk aluminum deposition at potentials more negative than -1.8 V was observed at room temperature. However, at 100 degrees C there is a frequency decrease with ongoing Al deposition. At -2.0 V vs Al/Al(III), a bulk aluminum deposition sets in.     

Effect of nitrate, perchlorate, and water on uranyl(VI) speciation in a room-temperature ionic liquid: a spectroscopic investigation

Room-temperature ionic liquids form potentially important solvents in novel nuclear waste reprocessing methods, and the solvation, speciation, and complexation behaviors of lanthanides and actinides in these solvents are of great current interest. In the study reported here, the coordination environment of uranyl(VI) in solutions of the room-temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf(2)N]) containing perchlorate, tetrabutylammonium nitrate, and water was investigated using Raman, ATR-FTIR, and NMR spectroscopies in order to better understand the role played in uranyl(VI) solution chemistry in room-temperature ionic liquids by water and other small, weakly complexing ligands. The (2)H NMR chemical shift for water in a solution of uranyl perchlorate hexahydrate in [EMIM][Tf(2)N] appears at 6.52 ppm, indicating that water is coordinated to uranyl(VI). A broad ν(OH) stretching mode at 3370 cm(-1) in the ATR-FTIR spectrum shows that this coordinated water is engaged in hydrogen bonding with water molecules in a second coordination sphere. A significant upfield shift in the (2)H NMR signal for water and the appearance of distinct ν(as)(HOH) (at 3630 cm(-1)) and ν(s)(HOH) (at 3560 cm(-1)) vibrational bands in the ATR-FTIR spectra show that coordinated water is displaced by nitrate upon formation of the UO(2)(NO(3))(2) and UO(2)(NO(3))(3)(-) complexes. The Raman spectra indicate that perchlorate complexed to uranyl(VI) is also displaced by nitrate. Our results indicate that perchlorate and water, though weakly complexing ligands, do have a role in uranyl(VI) speciation in room-temperature ionic liquids and that Raman, infrared, and NMR spectroscopies are valuable additions to the suite of tools currently used to study the chemical behavior of uranyl(VI)-ligand complexes in these solvents.     

Solvation of uranium hexachloro complexes in room-temperature ionic liquids. A molecular dynamics investigation in two liquids

We report a molecular dynamics study of the solvation of UCl(6)(-), UCl(6)(2-), and UCl(6)(3-) complexes in the [BMI][Tf(2)N] and [MeBu(3)N][Tf(2)N] ionic liquid cations based on the same anion (bis(trifluoromethylsulfonyl)imide (Tf(2)N-)) and the butyl-3-methyl-imidazolium+ (BMI+) or methyl-tri-n-butyl-ammonium (MeBu(3)N+) cation, respectively. The comparison of two electrostatic models of the complexes (ionic model with -1 charged halides versus quantum mechanically derived charges) yields similar solvation features of a given solute. In the two liquids, the first solvation shell of the complexes is positively charged and evolves from purely cationic in the case of UCl(6)(3-) to a mixture of cations and anions in the case of UCl(6)(-). UCl(6)(3-) is exclusively "coordinated" to BMI+ or MeBu(3)N+ solvent cations that mainly interact via their CH aromatic protons or their N-Me group, respectively. Around the less charged UCl(6)(-) complex, the cations interact via the less polar moieties (butyl chains of BMI+ or MeBu(3)N+) and the anions display nonspecific interactions. In no case does the uranium atom further coordinate solvent ions. According to an energy components analysis, UCl(6)(3-) interacts more attractively with the [BMI][Tf(2)N] liquid than with [MeBu(3)N][Tf(2)N], while UCl(6)(-) does not show any preference, suggesting a significant solvation effect of the redox properties of uranium, also supported by free energy perturbation simulations. The effect of ionic liquid (IL) humidity is investigated by simulating the three complexes in 1:8 water/IL mixtures. In contrast to the case of "naked" ions (e.g., lanthanide(3+), UO2(2+), alkali, or halides), water has little influence on the solvation of the UCl(6)(n-) complexes in the two simulated ILs, as indicated by structural and energy analysis. This is in full agreement with the experimental observations (Nikitenko, S. I.; et al. Inorg. Chem. 2005, 44, 9497).     

Synthesis and characterization of ionic liquids containing copper, manganese, or zinc coordination cations

Copper-, manganese-, and zinc-based ionic liquids (Cu{NH(2)CH(2)CH(2)OH}(6)[CH(3)(CH(2))(3)CH(C(2)H(5))CO(2)](2) (2), Cu{NH(CH(2)CH(2)OH)(2)}(6)[CH(3)(CH(2))(3)CH(C(2)H(5))CO(2)](2) (3A), Cu{NH(CH(2)CH(2)OH)(2)}(6)[CF(3)SO(3)](2) (3B), Cu{NH(CH(2)CH(2)OH)(2)}(6)[(CF(3)SO(2))(2)N](2) (3C), Mn{NH(CH(2)CH(2)OH)(2)}(6)[CF(3)SO(3)](2) (4), and Zn{NH(2)CH(2)CH(2)OH}(6)[CF(3)SO(3)](2) (5)) are synthesized in a single-step reaction. Infrared data suggest that ethanolamine preferentially coordinates to the metal center through the amine group in 2 and the hydroxyl group in 5. In addition, diethanolamine coordinates through the amine group in 3A, 3C, and 4 and the hydroxyl group in 3B. The compounds are viscous (>1000 cP) at room temperature, but two (3C and 4) display specific conductivities that are reasonably high for ionic liquids (>20 mS cm(-1)). All of the compounds display a glass transition (T(g)) below -50 °C. The cyclic voltammograms (CVs) of 2, 3A, 3B, and 3C display a single quasi-reversible wave associated with Cu(II)/Cu(I) reduction and re-oxidation while 5 shows a wave attributed to Zn(II)/Zn(0) reduction and stripping (re-oxidation). Compound 4 is the first in this new family of transition metal-based ionic liquids (MetILs) to display reversible Mn(II)/Mn(III) oxidation and re-reduction at 50 mV s(-1) using a glassy carbon working electrode.     

The effect of different interfaces and confinement on the structure of the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide entrapped in cationic and anionic reverse micelles

The behavior of the ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf(2)N]) entrapped in two reverse micelles (RMs) formed in an aromatic solvent as dispersant pseudophase: [bmim][Tf(2)N]/benzyl-n-hexadecyldimethylammonium chloride (BHDC)/chlorobenzene and [bmim][Tf(2)N]/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/chlorobenzene, was investigated using dynamic light scattering (DLS), FT-IR and (1)H NMR spectroscopies. DLS results reveal the formation of RMs containing [bmim][Tf(2)N] as a polar component since the droplet size values increase as the W(s) (W(s) = [[bmim][Tf(2)N]]/[surfactant]) increases. Furthermore, it shows that the RMs consist of discrete spherical and non-interacting droplets of [bmim][Tf(2)N] stabilized by the surfactants. Important differences in the structure of [bmim][Tf(2)N] entrapped inside BHDC RMs, in comparison with the neat IL, are observed from the FT-IR and (1)H NMR measurements. The electrostatic interactions between anions and cations from [bmim][Tf(2)N] and BHDC determine the solvent structure encapsulated inside the nano-droplets. It seems that the IL structure is disrupted due to the electrostatic interaction between the [Tf(2)N](-) and the cationic BHDC polar head (BHD(+)) giving a high ion pair degree between BHD(+) and [Tf(2)N](-) at a low IL content. On the other hand, for the AOT RMs there is no evidence of strong IL-surfactant interaction. The electrostatic interaction between the SO(3)(-) group and the Na(+) counterion in AOT seems to be stronger than the possible [bmim](+)-SO(3)(-) interaction at the interface. Thus, the structure of [bmim][Tf(2)N] encapsulated is not particularly disrupted by the anionic surfactant at all W(s) studied, in contrast to the BHDC RM results. Nevertheless, there is evidence of confinement in the AOT RMs because the [bmim](+)-[Tf(2)N](-) interaction is stronger than in bulk solution. Thus, the IL is more associated upon confinement. Our results reveal that the [bmim][Tf(2)N] structure can be modified in a different manner inside RMs by varying the kind of surfactant used to create the RMs and the IL content (W(s)). These facts can be very important if these media are used as nanoreactors because unique microenvironments can be easily created by simply changing the RM components and W(s).     

Synthesis of CoPt nanorods in ionic liquids

Cobalt platinum nanorods, hyperbranched nanorods, and nanoparticles were synthesized in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [BMIM][Tf2N], ionic liquid though the thermal reduction of platinum acetylacetonate, and cobalt acetylacetonate at 350 degrees C in the presence of cetyltrimethylammonium bromide (CTAB). It was found that the morphology, composition, and crystal phase of the resultant CoPt alloy nanomaterials could be controlled by changing the concentration and molar ratio of platinum and cobalt reactant precursors.     

Nanostructure evolution in high-temperature perfluorosulfonic acid ionomer membrane by small-angle X-ray scattering

The high-temperature morphology of supported liquid membranes (SLMs) prepared from perfluorinated membranes such as Nafion and Hyflon and hydrophobic ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI-TFSI) has been investigated by small-angle X-ray scattering (SAXS). Proton conductivity results of SLMs before and after leaching show an increase in conductivity with temperature up to 160 °C in an anhydrous environment. DSC results show that crystallites within perfluorinated membranes are thermally stable up to 196 °C. High-temperature SAXS results have been used to correlate structure and morphology of supported liquid membranes with high-temperature conductivity data. The ionic liquid essentially acts as a proton solvent in a similar way to water in hydrated Nafion membranes and increases size of clusters, which allow percolation to be achieved more easily. The cation of the ionic liquid interacts with sulfonate groups within ionic domains through electrostatic interactions and displaces protons. Protons can associate with free anions of the ionic liquid, which are loosely associated with cations and can transport by hopping from anion sites within the membrane. The ionic liquid contributes to proton conductivity at high temperature through achievement of long-range ordering and subsequent percolation.     

Solubility of tetrafluoromethane in the ionic liquid [hmim][Tf2N

Experimental results for the solubility of tetrafluoromethane (CF4, R14) in the ionic liquid 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([hmim][Tf2N]) are presented for temperatures between 293.3 and 413.3 K, at pressures (gas molalities) up to 9.6 MPa (0.22 mol kg-1). The experimental results were determined with a high-pressure view-cell technique operating on the synthetic method. The experimental data were used to determine Henry's constant of tetrafluoromethane in [hmim][Tf2N]. The results for the Henry's constant (at zero pressure) are correlated (on the molality scale) within the experimental uncertainty (i.e., about 1.1%) by ln(k(0)(H,CF4)/MPa) = 7.537 - 893.8/(T/K) - 0.003977(T/K). Henry's law was also extended to describe the gas solubility at higher pressures. Furthermore, a cubic equation of state was used to correlate the gas solubility over the entire range of experimentally investigated temperature and pressure. Both methods proved suited for a reliable correlation of the new experimental data.     

Acid extraction to a hydrophobic ionic liquid: the role of added tributylphosphate investigated by experiments and simulations

We have studied the extraction of four HA acids (HNO(3), HReO(4), HClO(4), HCl) to a hydrophobic ionic liquid (IL) 1-butyl-3-methylimidazolium-bis(trifluoromethanesulfonyl)amide (BMI(+) Tf(2)N(-)) at room temperature, in a wide range of acidic concentrations in water. The effect of tributylphosphate (TBP) as co-solvent is investigated. According to experimental observations, water dragging to the IL phase increases with added TBP and/or acids. Acid extraction is found to be weak, however, for the four acids except for concentrated HNO(3) (>3 M). Molecular dynamics simulations on model biphasic systems show that TBP is not surface active, but well dissolved in the IL. They also reveal the importance of HA acid model (either totally or half dissociated) and of the TBP content on acid extraction to the IL. Furthermore, they show that "the proton" can be extracted by TBP (H(3)O(+)(TBP)(3)"complex") without its A(-) conjugated base, via a cation transfer mechanism (BMI(+) transfer to water). Experiments and simulations show that TBP plays an important role in the mutual solubility between water and ionic liquid, by different amounts, depending on the HA acid. On the other hand, both approaches indicate that a HTf(2)N containing aqueous solution completely mixes with the [BMI][Tf(2)N] IL that contains the same Tf(2)N(-) anion.     

Heterogeneous solute dynamics in room temperature ionic liquids

The excitation wavelength dependence of the emission kinetics of several solutes is used to demonstrate the presence of dynamic heterogeneity in two representative room temperature ionic liquids, dimethyl-isopropyl-propyl-ammonium bis(trifluoromethylsulfonyl)imide [N(ip311)(+)][Tf(2)N(-)] and N-propyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide [Pr(31)(+)][Tf(2)N(-)]. The solute kinetics examined here include rotation and solvation of coumarin 153, isomerization of two malononitriles, and intramolecular charge transfer in crystal violet lactone. The rates of most of these processes vary significantly with excitation wavelength, especially for excitation on the red edges of the solute absorption bands, indicating that energetically selected subpopulations relax at distinct rates. The results presented here suggest more generally that dynamical processes taking place on the subnanosecond time scale in typical ionic liquids near room temperature are likely to be heterogeneous in character.     

Ideal gas solubilities and solubility selectivities in a binary mixture of room-temperature ionic liquids

This study focuses on the solubility behaviors of CO2, CH4, and N2 gases in binary mixtures of imidazolium-based room-temperature ionic liquids (RTILs) using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][Tf2N]) and 1-ethyl-3-methylimidazolium tetrafluoroborate ([C2mim][BF4]) at 40 degrees C and low pressures (approximately 1 atm). The mixtures tested were 0, 25, 50, 75, 90, 95, and 100 mol % [C2mim][BF4] in [C2mim][Tf2N]. Results show that regular solution theory (RST) can be used to describe the gas solubility and selectivity behaviors in RTIL mixtures using an average mixture solubility parameter or an average measured mixture molar volume. Interestingly, the solubility selectivity, defined as the ratio of gas mole fractions in the RTIL mixture, of CO2 with N2 or CH4 in pure [C2mim][BF4] can be enhanced by adding 5 mol % [C2mim][Tf2N].