紫外固化PDLC膜的形态及电光性能

选用紫外光固化法制备了聚合物分散液晶（ＰＤＬＣ）膜。以ＳＥＭ方法对其形态结构进行了考察，进而测试了ＰＤＬＣ的电光性能，并讨论了性能与结构的关系。     

LDPE／CPE／炭黑三相复合导电体系的电学性能

研究了ＬＤＰＥ／ＣＰＥ／炭黑三相复合导电体系的导性能和电流－电压特性。实验结果表明复合体系具有明显的导电渗滤效应，在共混比ＬＤＰＥ／ＣＰＥ＞５０／５０时，导电性能随ＣＰＥ含量增加而显著提高，这主要是由于炭黑粒子在ＬＤＰＥ和ＣＰＥ两组分分中的分布不均匀性所致。     

极低密度聚乙烯与其它聚乙烯的共混

从结构角度，用ＤＳＣ，ＷＡＸＤ，ＳＡＸＳ研究了聚乙烯（ＰＥ）家族中极低密度聚乙烯（ＶＬＤＰＥ）与其它ＰＥ的互容性．ＨＤＰＥ／ＶＬＤＰＥ是共晶互容的，以其大量无规部分“溶解”了ＨＤＰＥ的结晶缺陷部分，提高了ＨＤＰＥ的Ｔｃ，Ｔｍ，Ｘｃ，结晶峰半高宽变窄，晶胞参数随组成而有最低值．ＶＬＤＰＥ与ＬＬＤＰＥ结构极为相似，ＤＳＣ及ＷＡＸＤ证明其共混物是共晶相容体系．ＬＤＰＥ／ＶＬＤＰＥ的结晶度符合按组成的计算值，但晶胞参数ａ，ｂ以及晶粒尺寸增大，ＤＳＣ上有分别相应于两组份的两个Ｔｍ；ＶＬＤＰＥ的Ｔｃ，Ｔｍ峰高之和高于按组份的计算值，ＬＤＰＥ的Ｔｍ，Ｔｃ则低于计算值．认为是正如ＬＬＤＰＥ／ＬＤＰＥ，ＬＤＰＥ向充满整个体积的ＶＬＤＰＥ中不断填入，以ＶＬＤＰＥ为晶核而结晶，形成相分离的不相容体系．     

LDPE／CPE／炭黑三相复合导电体系的亚微形态和导电性能

对ＬＤＰＥ／ＣＰＥ／炭黑三相复合导电体系的亚微形态和导电性能进行了研究。实验发现,该体系的亚微形态在共混比ＬＤＰＥ／ＣＰＥ大于和小于５０／５０时为典型的“海－岛”结构,在５０／５０时,为两相连续交错“互锁”结构;在共混比大于５０／５０时,ＬＤＰＥ／ＣＰＥ炭黑复合体系的导电性能较单一的ＬＰＤＰＥ树脂与炭黑复合体系的高２－５个数量级。     

热致液晶（LC70）／PET共混物的结构与性能

采用ＷＡＸＤ、ＤＳＣ、ＰＯＭ、ＳＥＭ和力学测试方法研究了ＬＣ７０／ＰＥＴ原位复合材料的结构与性能。结果表明,当ＬＣ７０／ＰＥＴ＜２０％时,ＬＣ７０对ＰＥＴ的结晶生长具有一定促进作用;当ＬＣ７０／ＰＥＴ＞３０％时,共混物结晶能力迅速下降,结晶放热和熔融焓明显降低。     

RPS增容LDPE／PS研究

用ＨＡＡＫＥ、ＤＳＣ、ＩＲ等方法研究了侧基含有过氧键的反聚苯乙烯与ＬＤＰＥ之间的反应，并将其应用到ＬＤＰＥ／ＰＳ共混体系。考察了不同添加方式，交联助剂等对共混物力学性能、流变性能及微观结构的影响。     

高密度聚乙烯／低密度聚乙烯／乙烯—醋酸乙烯共聚物共混体系的结晶行为

通过ＤＳＣ和ＷＡＸＤ研究了高密度聚乙烯／低密度聚乙烯／乙烯－醋酸乙烯共聚物（ＨＤＰＥ／ＬＤＰＥ／ＥＶＡ）三元共混体系的热行为和结晶性能，发现当ＨＤＰＥ含量小于４０％时，ＥＶＡ对ＬＤＰＥ起稀释剂作用，促进ＨＤＰＥ、ＬＤＰＥ的晶相分离，使ＨＤＰＥ、ＬＤＰＥ单独结晶，当ＨＤＰＥ含量高于４０％时，ＬＤＰＥ片晶入进ＨＤＰＥ晶相，形成与ＬＤＰＥ在片晶水平上的共晶。     

高密度聚乙烯／低密度聚乙烯／乙烯－醋酸乙烯共聚物共混体系的结晶行为

通过ＤＳＣ和ＷＡＸＤ研究了高密度聚乙烯／低密度聚乙烯／乙烯－醋酸乙烯共聚物（ＨＤＰＥ／ＬＤＰＥ／ＥＶＡ）三元共混体系的热行为和结晶性能。发现当ＨＤＰＥ含量小于４０％时，ＥＶＡ对ＬＤＰＥ起稀释剂作用，促进ＨＤＰＥ、ＬＤＰＥ的晶相分离，使ＨＤＰＥ、ＬＤＰＥ单独结晶．当ＨＤＰＥ含量高于４０％时，ＬＤＰＥ片晶进入ＨＤＰＥ晶相。形成与ＬＤＰＥ在片晶水平上的共晶。     

LLDPE／LDPE共混体系的相容性与性能

ＬＬＤＰＥ／ＬＤＰＥ共混体系的相容性与性能杨毓华，花荣，白春霞，于旻李三喜，葛铁军（中国科学院长春应用化学研究所长春１３００２２）（沈阳化工学院高分子系沈阳）关键词ＤＳＣ，ＷＡＸＤ，力学性能，ＬＬＤＰＥ，ＬＤＰＥ，共混，相容性非晶－非晶－结晶共混体系...     

结晶聚合物晶相相容性的研究

通过ＤＳＣ、Ｘ－射线衍射、红外光谱及拉伸试验研究了ＨＤＰＥ与ＬＬＤＰＥ、ＨＤＰＥ与ＬＤＰＥ之间的晶相相容性。结果表明，链结构相近的ＨＤＰＥ和ＬＬＤＰＥ的晶相相容性好，能形成共晶，而链结构差异较大的ＨＤＰＥ和ＬＤＰＥ的晶相相容性较差，倾向于分别结晶。但有部分链段被对方的晶区夹持。不论是支化度大的ＬＤＰＥ锻段插入以ＨＤＰＥ为主的晶区，还是支化度小的ＨＤＰＥ锻段插入以ＬＤＰＥ为主的晶区，都可破坏晶区的规     

紫外光固化PDLC膜性能的温度效应

考察了紫外光固化PDLC膜的电光性能及其温度依赖性,阐述了其作为显示器件的工作稳定性。指出确定PDLC工作温度范围的方法,对PDLC膜中液晶相的N-I转变行为及其与膜的内部结构的关系进行了讨论。     

环氧基PDLC的制备及其电光性质

PDLC是一种新型的固态显示器件,具有优良的光电响应性能。我们以环氧交联法制备PDLC膜,考察了不同固化条件、浓度配比对PDLC膜形态结构的影响,讨论了凝胶点和分相机理的关系,进而测量了PDLC膜的光电响应,并对其响应过程提出了新的看法。     

UV tuning of the electro-optical and morphology properties in polymer-dispersed liquid crystals

Polymer-dispersed liquid crystal (PDLC) films operating in reverse mode are transparent electro-optical devices, which can be turned into an opaque state by application of a suitable electric field. The effect was investigated of different UV powers, used during the polymerization process, on the electro-optical and morphology properties of PDLCs, working in reverse mode operation. Films were obtained by UV polymerization of mixtures of a low molecular weight nematic liquid crystal and a photopolymerizable liquid crystal monomer, homeotropically aligned by rough conductive surfaces. The electro-optical and morphology properties of samples were related to the polymerization conditions. Samples polymerized by lower UV powers exhibited “polymer ball” morphology and an electro-optical response due to the liquid crystal director reorientation, whereas samples obtained at higher UV powers showed a “Swiss cheese” morphology and an electro-optical response due to dynamic scattering. In addition, we observed by conductivity and IR measurements that UV exposure induces a degradation of the nematic liquid crystal.     

Effects of a chemically modified multiwall carbon nanotubes on electro-optical properties of PDLC films

Polymer dispersed liquid crystal (PDLC) films are fabricated by well-known polymerization-induced phase separation method. In this paper, the dispersion of multi-walled carbon nanotubes (MWCNT) in liquid crystals has been enhanced by chemical modification and we have investigated their effects on the morphology, electro-optical properties and conductivity of the PDLC films. Results indicated that the threshold voltage and the saturation voltage of PDLC films decreased with the increase of the doping concentration of MWCNT or chemically modified MWCNT, because carbon nanotubes can enhance the electric field by reducing the resistivity of the medium and increasing the capacitance of the cells. It can be viewed obviously that the contrast ratio of the PDLC films doped with the chemically modified MWCNT is higher than that of the MWCNT.     

Cyano terminated tolane compounds for polymer dispersed liquid crystal application: relationship between cyano terminated tolane based molecular structures and electro-optical properties

ABSTRACT

The structures of the liquid crystal (LC) molecules have a key role in impacting the electro-optical performance of a polymer dispersed liquid crystal (PDLC) film. In this paper, the relationship between the LC molecular structures and the electro-optical properties of PDLC films is investigated based on an unexplored cyano-terminated tolane compounds (CTTCs) doped E8 LCs/UV polymers system. Due to the high polarity of CTTCs, LCs doped with the cyano-terminated tolane (CTT) molecules exhibit high birefringence and large positive dielectric anisotropy. On the whole, PDLC films doped with the CTT molecules exhibit a lower driving voltage than that doped with the pure E8. More excitingly, PDLC films based on CTT molecules with larger length-to-width ratio and longer conjugated system show higher contrast ratio (CR) and faster response time. Eventually, the mechanism of the effects of CTT-based molecular structures and the relationship between the electro-optical performance of PDLC films and CTT molecules are illustrated. This work paves a new way for optimising the electro-optical properties of PDLC films.     

Effects of crosslinking agent/diluents/thiol on morphology of the polymer matrix and electro-optical properties of polymer-dispersed liquid crystal

To study effects of the crosslinking agent/diluents/thiol on morphology of the polymer matrix and the electro-optical properties of polymer-dispersed liquid crystal (PDLC) films, samples were prepared by ultraviolet (UV)-initiated polymerisation. Due to the interaction between thiol–acrylate reaction and acrylate monomers polymerisation, the sample compositions were the foremost determinant to the microstructures which in turn played an essential role on the electro-optical properties of the PDLC films. With the increasing content of the crosslinking agent, the LC droplet size decreased, while the thiol had a contrary effect on the LC droplet size. It was demonstrated that the superior properties of the low-driven voltage (37.2 V), the high contrast ratio (148.2), the short response time (14.9 ms) and the high saturation transmittance (86.6%) could benefit from a novel microstructure which had a dense surface and meshes with microspheres attached. It was of great significance for the optimisation and the potential applications of the PDLC films.     

Photopolymerisation kinetics and electro-optical properties in mixtures of dichroic dye-doped nematic liquid crystal and photocurable polymer

This work reports the effect of dye on the photopolymerisation and electro-optical properties of polymer dispersed liquid crystal (PDLC) composite films. Dichroic PDLC (DPDLC) films based on a photocurable polymer and nematic liquid crystal (LC) with an azo dichroic dye were prepared by photopolymerisation-induced phase separation method. Polarising optical microscopy has been used for monitoring the phase separation kinetics and two-phase morphology evolution in the DPDLC system. LC domains with radial structures during initial period of phase separation adopted a resultant morphology of bipolar configuration over the course of polymerisation. The phase separation and morphology of LC domains was found to be dependent on the amount of dye used. Moreover, the addition of small amount of dye reduced the switching voltage, and enhanced the contrast ratio with improved switching time in the PDLC films. It was shown that, under the application of an electric field, the molecular orientation and absorbance of dichroic dye can be controlled in DPDLC to induce non-linearity and colour contrast without the use of polarisers.     

The physical properties of alkene-terminated liquid crystal molecules/E8 mixture and the electro-optical properties as they doped in polymer-dispersed liquid crystal systems

Effects of the content of fluorinated alkene-terminated liquid crystal (LC) molecules on the physical properties of the fluorinated alkene-terminated LC/E8 mixture were studied. The morphology and electro-optical properties as they doped in polymer-dispersed liquid crystal (PDLC) films were investigated. The detailed discussion of the obtained results is given. As a result, comparing with the physical properties of the series of LC mixtures with the same content of the analogous fully saturated compounds doped with E8, we find that the birefringence is significantly larger for the LC mixture with the alkene-terminated materials. Both fluorinated alkene-terminated LC molecules and the analogous fully saturated compounds doped with E8 reduce the driving voltage of PDLC films. Moreover, PDLC films with the fluorinated alkene-terminated LC molecules possessed higher contrast ratio and faster response time than that of the PDLC films prepared by adding the same mass fraction of the analogous fully saturated compounds. Thus, the ability to manipulate physical properties of LC mixture and electro-optical properties of PDLC films by changing the LC molecular structures may have future relevance for new LC structures design and applications of PDLC films.     

The investigation of molecular affinity involved in poly(ethylene glycol)-based polymer-dispersed liquid crystal display

Acrylic polyethylene glycol(PEG)-based polymer-dispersed liquid crystal (PDLC) films have been fabricated to investigate the effect of intermolecular interactions on PDLC performance. For this purpose, the amphiphilic liquid crystal and polymers are selected as PDLC composite materials. The acrylic PEG contents are varied from 0 to 66.66 mol wt.% in order to understand the effects of different levels of additions on the microstructure and electro-optical properties of the PDLC films. For this intention, polarized optical microscopy and UV–vis spectroscopy are used. The extent of phase separation and anchoring energy are also examined using Fourier transform infrared (FTIR) spectroscopy and contact angle measurements in consequence of acrylic PEG addition. The contrast ratio, threshold voltage, as well as saturation voltage, tended to increase with the addition of acrylic PEG. The molecular affinity involved in the polymer matrix and LC molecules affected the phase separation which is responsible for the formation of domain size; this accordingly changed the electro-optical properties of PDLC film.     

A novel polymer dispersed liquid crystal film prepared by reversible addition fragmentation chain transfer polymerization

Polymer as an important component of polymer dispersed liquid crystal (PDLC) has a great influence on electro-optical properties. In this letter, the effect of molecular weight of polymer matrix on the electro-optical properties of PDLC films was investigated with reversible addition fragmentation transfer (RAFT) polymerization. It was found that the saturation voltage and memory effect were apparently influenced by molecular weight of polymer which can be regulated efficiently by irradiation time, while the morphology of liquid crystal droplets kept unaltered. It was estimated that the increase of molecular weight of polymer enhanced entanglement between polymer and liquid crystal, which induced the different surface interaction and electro-optical properties.