Optically transparent and thermally stable nonlinear optic chromophores featuring a thieno[2,3-b]thiophene donor

A thieno[2,3-b]thiophene core has been utilized as a π-donor component to design two series of push-pull thienothiophenes by introducing various acceptor groups either via olefinic or aza-spacers. The molecules show a UV-visible cut-off wavelength below the second harmonic generation (SHG) at λ/2 of 532 nm, thereby conforming to the nonlinearity-transparency trade-off. Second order molecular nonlinearity, β measured by Hyper-Rayleigh scattering technique was found in the range of 9.58-47.66×10⁻³⁰ esu, while the Kurtz powder technique produced signals of the order of 0.43-1.02 U. Thermal decomposition temperatures measured by differential scanning calorimetry revealed decomposition temperatures≥275 °C, indicating high thermal stability.     

A concise synthesis and electrochemical behavior of functionalized poly(thieno[3,4-b]thiophenes): New conjugated polymers with low bandgap

New thieno[3,4-b]thiophene derivatives were prepared via a short and versatile synthetic route. Electrochemical studies of 2-heptenylthieno[3,4-b]thiophene, 2-styrylthieno[3,4-b]thiophene, and 2-phenyl-3-(thieno[3,4-b]thiophene-2-yl)acrylonitrile and the corresponding polymers revealed that raising the HOMO and lowering the LUMO can be attained by functionalizing thieno[3,4-b]thiophene with aromatic resonance-enhancing and electron-withdrawing groups. The bandgap of resulting polymers varied from 0.78 to 1.0 eV, indicating that poly(2-phenyl-3-(thieno[3,4-b]thiophene-2-yl)acrylonitrile) is one of the lowest bandgap polymers ever reported.     

Palladium-catalyzed amination and cyclization to heteroannellated indoles and carbazoles

New ortho-bromodiarylamines in the benzo[b]thiophene series were prepared by palladium-catalyzed amination, either in the benzene or in the thiophene ring. These were submitted to palladium-catalyzed cyclization, under different required conditions, to give several differently substituted thieno[3,2-c] or [2,3-b]carbazoles and indolo[3,2-b]benzo[b]thiophenes. This constitutes a novel synthetic route to both tetracyclic systems.     

Dipyridyl/pyridinium thieno[2,3-b]thiophenes as new atropisomeric systems. Synthesis, conformational analysis and energy minimization

Synthesis of a new class of cofacially oriented dipyridyl(pyridinium)lthieno[2,3-b]thiophenes with or without -CO₂Et and -COMe substituents at C2, and C5 positions of thieno[2,3-b]thiophene ring was readily accomplished using a double Dieckman cyclization protocol as the key step. While C2/C5 substituted dipyridylthieno[2,3-b]thiophenes exhibited syn/anti atropisomerism at least up to 70 °C with Arrhenius energy of activation (ΔG^≠) in the range of 17-18 kcal/mol, on the other hand unsubstituted dipyridylthieno[2,3-b]thiophene and its bis-N-quaternized salt were found to show free conformational rotation with an estimated ΔG^≠ of lower than 10 kcal/mol. Conformational energy minimization using AM1 protocol revealed a slight preference for the anti over syn isomers. Compared to the unsubstituted dipyridylthieno[2,3-b]thiophenes, higher energy barriers to rotation (3.7-5.1 kcal/mol) in substituted dipyridylthieno[2,3-b]thiophenes can be attributed to steric encumbrance resulting from -CO₂Et and -COMe substituents located on the non-rotating thienothiophene platform.     

Development of non-symmetric thiophene-fused BODIPYs

A series of non-symmetric BODIPYs containing thieno[3,2-b]pyrrole moiety were synthesized in 21-63% yields. The absorption and emission maxima covered from the visible green to red region (λ_abs=532-647 nm; λ_em=547-664 nm; Φ_f=0.19-0.45). X-ray analysis indicated that the S-C bond lengths were shorter than those of thienopyrrole and thienohelicene by 0.03-0.05 Å. The crystal packing pattern suggested that strong π-π interaction, intermolecular C-H?F interaction, and weak S?π interaction existed. The tunable emission was achieved by structure modifications. Oxidation of BODIPY (λ_em=547 nm) with m-CPBA generated thiophene-1,1-dioxide derived BODIPY (λ_em=528 nm). Knoevenagel-type condensation of BODIPY with N,N-dimethylaminobenzaldehyde led to BODIPY (λ_em=693 nm) with extended conjugation.     

Intramolecular 4+2 cycloaddition of thieno[2,3-e][1,2,4]triazines: routes towards condensed thieno[2,3-b]pyridines

Synthetic approaches towards new condensed thienopyridine ring systems including furo[2,3-b]thieno[3,2-e]pyridines, bisthieno[2,3-b:3′,2′-e]pyridines, 5H-chromeno[2,3-b]thieno[3,2-e]pyridines, 5H-benzo(f)chromeno[2,3-b]thieno[3,2-e]pyridines have been achieved by application of intramolecular 4+2 cycloaddition reactions of suitably designed thieno[2,3-e][1,2,4]triazines tethered with alkene or alkyne terminals.     

End-capping of conjugated thiophene-benzene aromatic systems

The synthesis of end-capped thieno[3,2-f:4,5-f′]bis[1]benzothiophene was achieved from thiophene and 2,5-thiophenedicarboxaldehyde. Specifically, hexyl and dodecyl end-capping groups conferred reversible redox behavior as evidenced by cyclic voltammetry with oxidation potentials of 0.73 V versus Fc/Fc⁺ couple. An extensive spectrophotometric analysis is reported.     

Synthesis,crystal structure,and FET characteristics of thieno[2,3-b]thiophene-based bent-thienoacenes

Two novel bent-shaped thienoacenes, naphtho[2,3-b]naphtho[2′,3′:4,5]thieno[3,2-d]thiophene (bent-DNTT) and anthra[2,3-b]anthra[2′,3′:4,5]thieno[3,2-d]thiophene (bent-DATT) were synthesized from thieno[2,3-b]thiophene and their corresponding aromatic anhydrides by three steps: Friedel–Crafts acylation, acid-promoted cyclization, and reductive aromatization. The structural curvature improved the solubility of these thienoacenes in organic solvents. The bent-DNTT based FET device was fabricated by the spin-coating method. The device exhibited p-type characteristics with a mobility of 5.1 × 10^?5 cm² V^?1 s^?1. Its thin-film structure was fully characterized as an edge-on orientation with large intermolecular orbital coupling.     

Neutral and cationic cyclometallated Ir(III) complexes of anthra[1,2-d]imidazole-6,11-dione-derived ligands: Syntheses, structures and spectroscopic characterisation

The syntheses of two new ligands and five new heteroleptic cyclometallated Ir(III) complexes are reported. The ligands are based upon a functionalised anthra[1,2-d]imidazole-6,11-dione core giving LH¹⁻³ incorporating a pendant pyridine, quinoline or thiophene unit respectively. Neutrally charged, octahedral complexes [Ir(ppy)₂(L¹⁻³)] are chelated by two cyclometallated phenylpyridine (ppy) ligands and a third, ancillary deprotonated ligand L¹⁻³, whilst cationic analogues could only be isolated for [Ir(ppy)₂(LH¹⁻²)][PF₆]. X-ray crystal structures for [Ir(ppy)₂(L¹)], [Ir(ppy)₂(LH¹)][PF₆] and [Ir(ppy)₂(L²)] showed the complexes adopt a distorted octahedral coordination geometry, with the anthra[1,2-d]imidazole-6,11-dione ligands coordinating in a bidentate fashion. Preliminary DFT calculations revealed that for the complexes of LH¹ and LH² the LUMO is exclusively localized on the ancillary ligand, whereas the nature of the HOMO depends on the protonation state of the ancillary ligand, often being composed of both Ir(III) and phenylpyridine character. UV-vis. and luminescence data showed that the ligands absorb into the visible region ca. 400 nm and emit ca. 560 nm, both of which are attributed to an intra-ligand CT transition within the anthra[1,2-d]imidazole-6,11-dione core. The complexes display absorption bands attributed to overlapping ligand-centred and ¹MLCT-type electronic transitions, whilst only [Ir(ppy)₂(L²)] appeared to possess typical ³MLCT behaviour (λ_em = 616 nm; τ = 96 ns in aerated MeCN). The remaining complexes were generally visibly emissive (λ_em ≈ 560-570 nm; τ < 10 ns in aerated MeCN) with very oxygen-sensitive lifetimes more indicative of ligand-centred processes.     

Novel 5-(4-alkoxyphenyl)thieno[3,2-b]thiophene-2-carboxylate esters: Highly efficient synthesis and mesogenic evaluation of a new class of materials exhibiting the smectic C phase

A series of alkyl 5-(4-alkoxyphenyl)thieno[3,2-b]thiophene-2-carboxylates were prepared via a direct, efficient Pd(0)-catalysed Suzuki–Miyaura coupling approach. A series of long-chain alkyl thieno[3,2-b]thiophene-2-carboxylate esters, synthesised from newly reported alkyl mercaptoacetates, were elaborated into the target compounds via regioselective (C-5) halogenation followed by cross-coupling with 4-alkoxyphenyltrifluoroborate salts. As expected, these target alkyl 5-(4-alkoxyphenyl)thieno[3,2-b]thiophene-2-carboxylate ester mesogens exhibited the orthogonal smectic A phase; notably, they are the first materials built on the thieno[3,2-b]thiophene motif to also exhibit the smectic C mesophase.     

A convenient [2+2] cycloaddition-cycloreversion reaction for the synthesis of 1,1-dicyanobuta-1,3-diene-scaffolded peptides as new imaging chromophores

We report on the chemoselective coupling between colorless peptide fragments functionalized with a mutually reactive electron-rich N^α-(4-ethynylphenyl)-N^α-(methyl)-glycyl- and an electron-deficient [4-(2,2-dicyanovinyl)]benzoyl moiety. The resulting donor-substituted 1,1-dicyanobuta-1,3-dienes represent a new class of orange-red colored (λ_max = 450-500 nm, with molar extinction coefficients (ε) above 5,000 mol⁻¹ dm³ cm⁻¹) peptide-based imaging chromophores.     

Impact of Heterocycle Annulation on NIR Absorbance in Quinoid Thioacene Derivatives

The synthesis and characterisation of a homologous series of quinoid sulfur-containing imidazolyl-substituted heteroacenes is described. The optoelectronic and magnetic properties were investigated by UV/vis, fluorescence and EPR spectroscopy as well as quantum-chemical calculations, and were compared to those of the corresponding benzo congener. The room-temperature and atmospherically stable quinoids display strong absorption in the NIR region between 678 and 819 nm. The dithieno[3,2-b:2′,3′-d]thiophene and the thieno[2′,3′:4,5]thieno[3,2-b]thieno[2,3-d]thiophene derivatives were EPR active at room temperature. For the latter, variable-temperature EPR spectroscopy revealed the presence of a thermally accessible triplet state, with a singlet-triplet separation of 14.1 kJ mol⁻¹.     

One-step synthesis of [1]benzothieno[3,2-b][1]benzothiophene from o-chlorobenzaldehyde

Simple one-step synthesis of [1]benzothieno[3,2-b][1]benzothiophene (BTBT) from commercially available o-chlorobenzaldehyde is reported. The procedure is also applicable to the synthesis of dinaphtho[2,3-b:2′,3′-f]thieno[3,2-b]thiophene (DNTT).     

Construction of new heteroacenes based on benzo[b]thieno[2,3-d]thiophene / quinoline or 1,8-naphthyridine systems using the Friedländer reaction

Two new classes of heteroacenes, namely benzo[4′,5′]thieno[2′,3′:4,5]thieno[3,2-b]quinolines and benzo[4′,5′]thieno[2′,3′:4,5]thieno[3,2-b][1,8]naphthyridines, have been formed using the Friedländer reaction to annulate the benzo[b]thieno[2,3-d]thiophene scaffold to quinoline or 1,8-naphthyridine fragments. In accordance with this synthetic strategy, benzo[b]thieno[2,3-d]thiophen-3(2H)-ones were treated with 2-aminobenzaldehydes or 2-aminonicotinaldehyde in the presence of pyrrolidine in glacial acetic acid at reflux to give the desired quinoline- or 1,8-naphthyridine-fused compounds, respectively. The optical and electrochemical properties of selected heteroacenes were determined.     

New thieno[3,2-b]indole conjugates with 5-(methylene)rhodanine-3-acetic acid in dye-sensitized solar cells

Five new dyes with D–π–A structure bearing 5-(methylene)-rhodanine-3-acetic acid as an acceptor-anchoring part and thieno[3,2-b]indole or benzo[g]thieno[3,2-b]indole as an electron-donating part were synthesized and applied as photosensitizers for dye-sensitized solar cells (DSSCs). In addition, thermal stability, optical and electrochemical properties of these dyes were investigated. The highest PCE value of 1.09% (J_sc = 3.01 mA cm^–2, V_oc = 0.53 V, FF = 0.69) was achieved for DSSC based on benzo[g]thieno[3,2-b]indole dye under AM 1.5G irradiation.     

Benzo[b]thiophen-3(2H)-one 1,1-dioxide—a versatile reagent in the synthesis of spiroheterocycles

New applications of benzo[b]thiophen-3(2H)-one 1,1-dioxide have been investigated. The synthesis of a new heterocyclic system 3H,2′H-spiro[benzo[b]thieno[3,2-b]pyridine-3,2′-benzo[b]thiophene] is described and a mechanism for the cyclisation is proposed.     

Effect of spacer insertion in a commonly used dithienosilole/benzothiadiazole-based low band gap copolymer for polymer solar cells

Dithienosilole-benzothiadiazole based low bandgap copolymers remain promising material for organic photovoltaics. A new copolymer, poly[(4,4′-dioctyldithieno[3,2-b:2′,3′-d]silole-2,6-diyl)-alt-{4,7-bis[2-(3-hexyl)thienyl]-2,1,3-benzothiadiazole-5,5′-diyl}] (PDTSDTBT) was designed by introducing a thiophene spacer bearing a hexyl chain at β-position in the main backbone and compared to its analog poly[(4,4′-dioctyldithieno[3,2-b:2′,3′-d]silole-2,6-diyl)-alt-(2,1,3-benzothiadiazole-4,7-diyl)] (PDTSBT). In PDTSDTBT, linear alkyl chains on silicon were chosen due to facile and cheap access and the inserted 3-hexylthiophene units were chosen to increase solubility and molar mass, a weak point with PDTSBT. The two parameters are important to optimize photovoltaic performances. To compare characteristics, PDTSDTBT of molar masses greater than, and equal to a sample of PDTSBT, were prepared. Pd-catalyzed Stille cross-coupling reactions in a micro-wave reactor to promote an efficient copolymerisations. A strong absorption ranging from 370 nm to 800 nm and a good thermal stability were observed. PDTSDTBT showed better solubility and higher degree of crystallinity. Facile synthesis of high molar masses meant that higher efficiencies, around 40% greater, could be obtained with PDTSDTBT. The polymer was demonstrated to be susceptible to improvement through the use of device-additives. For example, under initial optimisations using PDTSDTBT:PC₆₀BM blend at a ratio of 1:1 delivered a power conversion efficiency of 2.13% with J_SC = 7.73 (mA/cm²), under AM 1.5 (100 mW/cm²) illumination.     

Angular polycyclic thiophenes containing two thiophene rings. I

We describe the synthesis of thieno[2,3-c]dibenzothiophene ( 6 ), thieno[3,2-c]dibenzothiophene ( 10 ), thieno-[3,2-a]dibenzothiophene ( 14 ), thieno[2,3-a]dibenzothiophene ( 16 ), benzo[1,2-b:4,3-b]bisbenzo[b]thiophene ( 18 ), benzo[1,2--6:3,4-b]bisbenzo[b]thiophene ( 20 ), benzo[2,1--6:3,4-b]bisbenzo[b]thiophene ( 22 ), benzo[1,2-b:3,4-g]bisbenzo[b]thiophene ( 27 ), benzo[1,2-b:4,3-e]bisbenzo[b]thiophene ( 29 ), benzo[2,1--6:3,4-g]bisbenzo[b]thiophene ( 36 ), benzo[2,1--6:4,3-e]bisbenzo[b]thiophene ( 38 ), benzo[1,2--6:4,3-g]bisbenzo[b]thiophene ( 41 ), benzo[1,2-b:4,5-g]bisbenzo[b]thiophene ( 42 ), benzo[1,2-b:3,4-e]bisbenzo[b]thiophene ( 44 ) and benzo-[1,2-b:5,4-e]bisbenzo[b]thiophene ( 45 ).     

Spin trapping of alkoxyl radicals generated from 5-methyl and 5-aryl-3-alkoxy-4-methylthiazole-2(3H)-thiones in photochemically induced and microwave-initiated reactions

Methoxyl and isopropoxyl radicals were generated from N-alkoxy-4,5-dimethylthiazole-2(3H)-thiones (λ_max∼320 nm) and 5-aryl derivatives (aryl=p-XC₆H₄; X=MeO, H, AcNH, Cl) (λ_max∼335 nm) in photochemically and microwave-induced reactions. Alkoxyl radicals were trapped with dimethylpyrrolidine N-oxide and characterized as spin adducts via EPR. Cumyloxyl radicals were liberated in a similar manner from N-cumyloxy-5-(4-methoxyphenyl)-4-methylthiazole-2(3H)-thione. A noteworthy bathochromic shift was found for the lowest energy transition of N-(hydroxy)indeno[2,1-d]thiazole-2(3H)-thione (λ_max=376 nm), if compared to the UV-vis absorption of N-hydroxy-4-methyl-5-phenylthiazole-2(3H)-thione (λ_max=338 nm). Syntheses of alkoxyl radical precursors and procedures for conducting N,O-homolysis are described in a full account.     

Synthesis of efficient blue and red light emitting phenanthroline derivatives containing both hole and electron transporting properties

Two phenanthroline derivatives containing a hole transporting triphenylamine and an electron transporting 1,3,4-oxadiazole unit have been prepared with high yield. UV-vis absorption and fluorescence measurement indicated they are high efficient light-emitting materials. The compounds are 6-(5-(4-N,N′-diphenylaminophenyl)-1,3,4-oxadiazol-2-yl) quinoxalino[2,3-f] phenanthroline (9, λ_max = 635 nm, 40% quantum yield), and 1-ethyl-2-(4-(5-(4-N,N′-diphenylaminophenyl)-1,3,4-oxadiazol-2-yl)phenyl)imidazo[4,5-f]phenanthroline (14, λ_max = 461 nm, 78% quantum yield). Preliminary study on electroluminescence for the two fluorescent dyes prepared from vacuum evaporation resulted in blue and red light emitting organic light emitting diodes (OLED).