Copper(II) tetrafluoroborate-catalyzed ring-opening of epoxides by amines

Copper(II) tetrafluoroborate catalyzes efficiently the selective opening of epoxides by amines leading to the synthesis of β-amino alcohols. The reaction works well with aromatic and aliphatic amines in high yields under solvent-free conditions.     

Copper(II)-Catalyzed Decomposition of Hydrogen Peroxide: Catalyst Activation by Halide Ions

Summary.  The catalytic action of Cu(II) on the decomposition of H₂O₂ in near-neutrality aqueous solutions is activated by halide ions. The activation energies amount to 113±7 (parent reaction) and 69.9±1.4 (chloride-activated reaction) kJ · mol⁻¹. Free-radical chain mechanisms are proposed for both the parent reaction and the halide-activated reaction. The catalyst activation caused by halide ions is explained in terms of coordination of halide ligands by both Cu(II) and Cu(I), the coordination causing a higher stabilization of Cu(I) than of Cu(II). At low concentrations, Br⁻ causes an inhibition of the Cu(II)/H₂O₂ reaction. This is explained in terms of an increase of the rate of termination of the chain reaction due to the scavenging effect of OH radicals caused by Br⁻. Received March 27, 2001. Accepted (revised) May 25, 2001.     

Copper(I)-Catalyzed Asymmetric Hydrophosphination of 3,3-Disubstituted Cyclopropenes

Herein, a copper(I)-catalyzed asymmetric hydrophosphination of 3,3-disubstituted cyclopropenes is reported. It provides a series of phosphine derivatives in high to excellent diastereo- and enantioselectivities. The methodology enjoys broad substrate scope on both 3,3-disubstituted cyclopropenes and diarylphosphines. The high stereoselectivity is attributed to both the high stability of the Cu(I)-(R,R)-QUINOXP* complex in the presence of stoichiometric HPPh₂ and the produced phosphines, and the high-performance asymmetric induction of the Cu(I)-(R,R)-QUINOXP* complex. Finally, the method is used for the synthesis of new chiral phosphine-olefin compounds built on a cyclopropane skeleton, one of which serves as a wonderful ligand in Rh-catalyzed asymmetric conjugate addition of phenylboronic acid to various α,β-unsaturated compounds.     

Copper(II)-Catalyzed Dehydrogenative Cross-Coupling between Two Azoles

The copper(II)-catalyzed dehydrogenative coupling between two different azoles for the preparation of unsymmetrical biazoles has been developed. The current catalytic system can effectively control the chemoselectivity for heterocoupling over homocoupling.     

Olefin Dihydroxylation Using Nitroarenes as Photoresponsive Oxidants

Vicinal diols are abundant among natural and synthetic molecules, and also represent valuable intermediates throughout organic synthesis. Olefin dihydroxylation is an effective strategy to access these derivatives owing to the broad range and availability of alkene feedstocks. OsO₄ is among the most used reagents to achieve this transformation, yet its high toxicity and cost remain concerning. Herein, we present a mechanistically distinct strategy for olefin dihydroxylation using nitroarenes as photoresponsive oxidants. Upon purple LEDs irradiation, these species undergo a [3+2]-photocycloaddition with a wide range of olefins to give stable 1,3,2-dioxazolidine intermediates. These species can be accumulated in solution and then reduced in situ to the desired diols, utilising readily accessible and easy to handle solid reagents as H₂ surrogates.     

Copper(I)-Catalyzed Asymmetric Allylation of Ketones with 2-Aza-1,4-Dienes

Catalytic asymmetric allylation of ketones under proton-transfer conditions is a challenging issue due to the limited pronucleophiles and the electrophilic inertness of ketones. Herein, a copper(I)-catalyzed asymmetric allylation of ketones with 2-aza-1,4-dienes (N-allyl-1,1-diphenylmethanimines) is disclosed, which affords a series of functionalized homoallyl tertiary alcohols in high to excellent enantioselectivity. Interestingly, N-allyl-1,1-diphenylmethanimines work as synthetic equivalents of propanals. Upon the acidic workup, a formal asymmetric β-addition of propanals to ketones is achieved. An investigation on KIE effect indicates that the deprotonation of N-allyl-1,1-diphenylmethanimines is the rate-determining step, which generates nucleophilic allyl copper(I) species. Finally, the synthetic utility of the present method is demonstrated by the asymmetric synthesis of (R)-boivinianin A and (R)-gossonorol.     

Copper(II) complexes containing hemilabile tridentate ligand as chromotropic probes

Two copper(II) complexes with the general formula [Cu(L)(H₂O)](ClO₄)₂ (1) and [Cu(L)₂](ClO₄)₂ (2), where L=3-((pyridin-2-ylmethyl)amino)propanamide, were synthesized and characterized by elemental analyses, IR, UV–vis spectroscopy techniques and molar conductance measurements. The crystal structures of the complexes were identified by single crystal X-ray diffraction analysis. The tridentate ligand L acts as an N₂O-donor through the nitrogen atoms of the pyridine and amine moieties as well the oxygen atom of the amide group. The copper(II) ions in both complexes have distorted octahedron structures so that the Cu(II) ion in 1 is coordinated by an aqua ligand and a tridentate ligand defining the basal plane, and by two oxygen atoms of the perchlorate ions occupying the axial positions. However, two ligands L are coordinated to the copper(II) ion in 2, where four nitrogen atoms of pyridine and amine groups occupy the equatorial positions and two oxygen atoms of the amide moieties exist in the apices. The chromotropism (halo-, solvato- and ionochromism) of both complexes were studied using visible absorption spectroscopy. The complexes are soluble in water and organic solvents and display reversible halochromism. The solvatochromism property is due to structural change followed by solvation of the vacant sites of the complexes. The complexes demonstrated obvious ionochromism and are highly sensitive and selective towards CN^? and N₃^? anions in the presence of other halide and pseudo-halide ions.     

Copper(II) ion-selective microelectrochemical transistor

A device has been developed for the measurement of copper(II) ions (Cu²⁺) in aqueous medium. The device reported here is an electrochemical transistor which consists of two platinum electrodes separated by 100 μm spacing and bridged with an anodically grown film of polycarbazole. Polycarbazole film (undoped form) is observed to be highly selective for the Cu(II) ions. In a completed device, the conductivity of the polycarbazole film changes on addition of Cu(II) ions. The change in conductivity is attributed to the conformational changes in the polymer phase on occupation of the Cu(II) ions, without affecting electron/proton transfer. The device turns on by adding 2.5 × 10⁻⁶ M Cu(II) ions and reaches a saturation region beyond 10⁻⁴ M Cu(II) ion concentrations. In the above concentration range, the device response [I _D vs. log Cu(II) ion concentration] is linear. The selectivity of the device for other metal ions such as Cu(I), Ni(II), Co(II), Fe(II), Fe(III), Zn(II) and Pb(II) is also studied. Received: 6 April 1999 / Accepted: 20 August 1999     

Copper(II) coordination compounds with ferulic acid

The first two molecular structures of the ferulic acid (3-(4-hydroxy-3-methoxyphenyl)-2-propenoic acid, C₁₀H₁₀O₄) coordination compounds are presented, namely, [Cu₂(C₁₀H₉O₄)₄(CH₃CN)₂] 1 and [Cu₂(C₁₀H₉O₄)₄(C₆H₆N₂O)₂]·4CH₃CN (C₆H₆N₂O = nicotinamide) 2. Both compounds were synthesised from the starting mixture of Cu₂O and CuCl upon copper oxidation in the acetonitrile solution. The single-crystal X-ray diffraction analysis of 1 and 2 reveals the binuclear structure of the ‘paddle–wheel’ type for both complexes. 1 and 2 are unstable outside mother liquid due to loosely bound acetonitrile molecules. The final products of decomposition are [Cu₂(C₁₀H₉O₄)₄] 1a and [Cu₂(C₁₀H₉O₄)₄(C₆H₆N₂O)₂] 2a, which were characterized by several physico-chemical methods. The triplet X-band EPR spectra of 1a and 2a, showing signals B_Z1  15 mT, B₂  460 mT and B_Z2  580 mT, are in agreement with the expected data for the binuclear tetracarboxylate units, found in the structures of the parent complexes 1 and 2. Together with the room temperature magnetic susceptibility data, μ_eff/B.M. 1.40 (1a), 1.48 (2a), the EPR spectra analysis confirm the antiferromagnetic interaction in 1a and 2a. This is suggesting preservation and stability of the paddle–wheel structures in 1a and 2a.     

Simple,Copper(I)-Catalyzed Oxidation of Benzylic/Allylic Alcohols to Carbonyl Compounds: Synthesis of Functionalized Cinnamates in One Pot

An environmentally benign [Cu(I)]-catalyzed oxidation of activated (benzylic/allylic) alcohols to the corresponding carbonyl compounds is presented. Interestingly, the reaction was also compatible with benzylic alcohols containing ortho-bromo substituents on the aromatic ring without competing with the expected intermolecular Buchwald coupling. Significantly, the catalytic system enables the synthesis of cinnamate-esters in a sequential domino one-pot fashion via oxidation followed by Wittig–Horner protocol.     

Copper(II) ion hydrolysis in aqueous solution

A copper(II) ion-selective-electrode potentiometric method was used to determine the first and second hydrolysis constants of Cu²⁺. Special techniques prevented copper(II) hydroxide precipitation, and copper(II) carbonate and cipper(II) organic complexation during the titration of the experimental solution over the pH range 6.8–8.4. The large change in the total copper concentration during the titration due to adsorption of copper onto the vessel walls was accounted for by measuring the total copper concentration at each pH by atomic absorption spectrophotometry. The two hydrolysis constants were determined at 25°C in 0.7 and 0.05m NaClO₄ media. The measured stability constants are independent of the copper concentration and yield similar zero ionic strength values. Also, the stepwise equilibrium constants decrease as the ligand number increases.     

Catalytic activity of some new copper(II) azo-complexes

Copper(II) complexes [Cu(L)₂]?·?nH₂O, where L is 3-(p-X-)-4-hydroxy-l,2-naphthoquinone (for L1, X?=?H; L2, X?=?CH₃; L3, X?=?Cl; L4, X?=?Br; and L5, X?=?NO₂), have been synthesized and characterized by analytical, electrochemical, spectroscopic (IR, UV-Vis, ESR, and ¹H NMR), and magnetic methods. From the data obtained, square-planar geometry has been assigned for all the complexes. [CuL1]?·?H₂O exhibits catalytic activity for oxidation of benzyl alcohol, piperonyl alcohol, and cinnamyl alcohol into their respective aldehydes in the presence of H₂O₂ as co-oxidant and in CH₃CN and H₂O as solvents at room temperature.     

Chemiluminescence Flow Injection Determination of Copper (II)

ABSTRACT

A sensitive and selective flow injection chemiluminescence method for the determination of copper over the range of 0.5-7.5 ng is described. The method is based on quenching effect of copper (II) on the chemiluminescent reaction of dichlorofluorescein and hydrogen peroxide in alkaline media. Method development includes optimization of reagent concentrations and flow conditions. The optimized method yielded a detection limit (3σ) of 0.2 ng. The method is simple, fast, selective and precise and was used for the determination of copper in blood sera.     

One-dimensional Copper(II) Complex Constructed with Nitrate Counter-anion as Bitopic Connector

The design and synthesis of supramolecular structures has become an area of intense research in recent two decades.By carefully choosing the ions and ligands,frameworks with interesting and desirable properties can be created1-2.Essence of supramolecular chemistry is the self-assembly process of diversified interactions,such as metal-ligand coordination,hydrogen bonding,π-πstacking,etc.In contrast to the well-studied metal ions and ligands,there are relatively few examples about anionic func…     

Copper(II) bromide as efficient catalyst for silyl- to bisarylmethyl ethers interconversion (transprotection)

Primary and secondary silylated alcohols are easily converted to bis(methoxyphenyl)methyl (BMPM) ethers in good yields using CuBr₂ as catalyst in acetonitrile at room temperature. Various other protecting groups are compatible with this mild and convenient process.     

Copper(II)-mediated oxidation of 1,2-dioxime to furoxan

1,2-Dioximes undergo oxidative transformation mediated by copper(II) ions in acetonitrile to form the corresponding furoxans in high yields. A series of 1,2-dioximes including aliphatic, aromatic, and heterocyclic dioximes were oxidized using these mild conditions.     

Cu(I)催化的多组分反应的研究进展

综述了Cu(I)催化的多组分反应的最新研究进展, 详细地介绍了各个反应的底物要求、反应条件、反应选择性、产率以及机理的研究. 同时, 还讨论了其优缺点, 并对其发展加以展望.     

A Copper(I)-Catalyzed Sulfonylative Hiyama Cross-Coupling

An air-tolerant Cu-catalyzed sulfonylative Hiyama cross-coupling reaction enabling the formation of diaryl sulfones is described. Starting from aryl silanes, DABSO and aryliodides, the reaction tolerates a large variety of polar functional groups (amines, ketones, esters, aldehydes). Control experiments coupled with DFT calculations shed light on the mechanism, characterized by the formation of a Cu(I)-sulfinate intermediate via fast insertion of a SO₂ molecule.     

Copper(II) complexes with aroylhydrazones

The coordination chemistry of copper(II) with tridentate aroylhydrazones is briefly discussed in this article. Two types of aroylhydrazones derived from aroylhydrazines and ortho-hydroxy aldehydes or 2-pyridine-carboxaldehyde have been used. The characterization of the complexes has been performed with the help of various physico-chemical techniques. Solid state structural patterns have been established by X-ray crystallography. In the solid state, structural varieties of these complexes are seen to range from monomeric, dimeric, polymeric and one-dimensional self-assembly via hydrogen bonds and π-π interactions. EPR spectroscopy and variable temperature magnetic susceptibility measurements have been used to reveal the nature of the coordination geometry and magnetic characteristics of these complexes.     

Terminal and Internal Olefin Epoxidation with Cobalt(II) as the Catalyst: Evidence for an Active Oxidant Co(II)-Acylperoxo Species

A simple catalytic system that uses commercially available cobalt(II) perchlorate as the catalyst and 3-chloroperoxybenzoic acid as the oxidant was found to be very effective in the epoxidation of a variety of olefins with high product selectivity under mild experimental conditions. More challenging targets such as terminal aliphatic olefins were also efficiently and selectively oxidized to the corresponding epoxides. This catalytic system features a nearly nonradical-type and highly stereospecific epoxidation of aliphatic olefin, fast conversion, and high yields. Olefin epoxidation by this catalytic system is proposed to involve a new reactive Co(II)-OOC(O)R species, based on evidence from H(2)(18)O-exchange experiments, the use of peroxyphenylacetic acid as a mechanistic probe, reactivity and Hammett studies, EPR, and ESI-mass spectrometric investigation. However, the O-O bond of a Co(II)-acylperoxo intermediate (Co(II)-OOC(O)R) was found to be cleaved both heterolytically and homolytically if there is no substrate.