Syntheses and structures of iron carbonyl complexes derived from N-(5-methyl-2-thienylmethylidene)-2-thiolethylamine and N-(6-methyl-2-pyridylmethylidene)-2-thiolethylamine

The reaction of N-(5-methyl-2-thienylmethylidene)-2-thiolethylamine (1) with Fe₂(CO)₉ in refluxing acetonitrile yielded di-(μ₃-thia)nonacarbonyltriiron (2), μ-[N-(5-methyl-2-thienylmethyl)-η¹:η¹(N);η¹:η¹(S)-2-thiolatoethylamido]hexacarbonyldiiron (3), and N-(5-methyl-2-thienylmethylidene)amine (4). If the reaction was carried out at 45 °C, di-μ-[N-(5-methyl-2-thienylmethylidene)-η¹(N);η¹(S)-2-thiolethylamino]-μ-carbonyl-tetracarbonyldiiron (5) and trace amount of 4 were obtained. Stirring 5 in refluxing acetonitrile led to the thermal decomposition of 5, and ligand 1 was recovered quantitatively. However, in the presence of excess amount of Fe₂(CO)₉ in refluxing acetonitrile, complex 5 was converted into 2-4. On the other hand, the reaction of N-(6-methyl-2-pyridylmethylidene)-2-thiolethylamine (6) with Fe₂(CO)₉ in refluxing acetonitrile produced 2, μ-[N-(6-methyl-2-pyridylmethyl)-η¹ (N_py);η¹:η¹(N); η¹:η¹(S)-2-thiolatoethylamido]pentacarbonyldiiron (7), and μ-[N-(6-methyl-2-pyridylmethylidene)-η²(C,N);η¹:η¹(S)-2- thiolethylamino]hexacarbonyldiiron (8). Reactions of both complex 7 and 8 with NOBF₄ gave μ-[(6-methyl-2-pyridylmethyl)-η¹(N_py);η¹:η¹(N);η¹:η¹(S)-2-thiolatoethylamido](acetonitrile)tricarbonylnitrosyldiiron (9). These reaction products were well characterized spectrally. The molecular structures of complexes 3, 7-9 have been determined by means of X-ray diffraction. Intramolecular 1,5-hydrogen shift from the thiol to the methine carbon was observed in complexes 3, 7, and 9.     

Development of a Novel Approach to Formation of a Pyrrole Ring: Synthesis of 2,3,5-Substituted 1-[2-(Vinyloxy)ethyl]pyrroles

Reaction of 2-(vinyloxy)ethylisothiocyanate with unsaturated carbanions generated in situ from propargyl ethers and amines when treated with superbases, after S-alkylation and cyclization of the adducts in the presence of CuBr, leads to the previously unknown 2,3,5-substituted 1-[2-(vinyloxy)ethyl]pyrroles.     

Synthesis of 1H-pyrrolo[3,2-c]quinoline derivatives via palladium-catalyzed heteroannulation of 2-aryl-3-iodo-4-(phenylamino)quinolines and 4-(N,N-allylphenylamino)-2-aryl-3-iodoquinolines

Palladium(0)/copper iodide catalyzed Sonogashira cross-coupling of 2-aryl-3-iodo-4-(phenylamino)quinolines with terminal alkynes afforded series of 1,2,4-trisubstituted 1H-pyrrolo[3,2-c]quinolines in a single-step operation. Conversely, the 4-(N,N-allylphenylamino)-2-aryl-3-iodoquinoline derivatives were found to undergo PdCl₂(PPh₃)₂/CuI catalyzed intramolecular Heck reaction to yield the corresponding 1,3,4-trisubstituted 1H-pyrrolo[3,2-c]quinolines.     

Reactivity of azafulvenium methides derived from pyrrolo[1,2-c]thiazole-2,2-dioxides: synthesis of functionalised pyrroles

Extrusion of sulfur dioxide from pyrrolo[1,2-c]thiazole-2,2-dioxides led to the synthesis of functionalised pyrroles via the generation of 1-azafulvenium methides. Sealed tube reaction conditions allowed the synthesis of N- and C-vinylpyrroles whereas from FVP methyl 1,3-dimethyl-5-oxo-5H-pyrrolizine-2-carboxylate and 4-oxo-1,4-dihydro-1-aza-benzo[f]azulene-3-carboxylates were obtained. These last compounds could also be obtained from the FVP of the N- and C-vinylpyrroles.     

A facile synthesis of 2-[1-(dialkylamino)alkyl]-4H-3,1-benzoxazin-4-ones by the reaction of 1,1-dimethylethyl 2-isocyanobenzoates with N,N-dialkyliminium iodides

A convenient synthetic approach to 2-[1-(dialkylamino)alkyl]-4H-3,1-benzoxazin-4-ones has been developed. Thus, 1,1-dimethylethyl 2-isocyanobenzoates, which can be readily prepared from 2-nitrobenzoic acids by a simple four-step sequence, react with N,N-dialkyliminium iodides without using any catalysts under mild conditions to give the desired products in generally fair-to-good yields.     

Reactions of Heterocumulenes with Organometallic Reagents: IX. Synthesis and Rearrangements of N-Allyl-and N-[2-(Vinyloxy)ethyl]-3-butenethioamides and -1-(methylsulfanyl)-3-buten-1-imines

Reactions of allyl and 2-(vinyloxy)ethyl isothiocyanates with alyylmagnesium bromide (THF-Et₂O, 20-30°C, 1-3 h) after hydrolysis or alkylation of adducts afforded respectively N-allyl- and N-[2-(vinyloxy)ethyl]-3-butenethioamides or N-allyl- and N-[2-(vinyloxy)ethyl]-1-(methylmercapto)-3-buten-1-imines. The reaction carried out in ethyl ether yielded instead of Nt-allyl-3-butenethioamide its isomer N-allyl-2-butenethioamide that cleanly isomerized in the system KOH-DMSOH₂O into N-(1-propenyl)-2-butenethioamide. N-[2-(vinyloxy)ethyl]-3-butenethioamide suffers a prototropic rearrangement into N-[2-(vinyloxy)ethyl]-2-butenethioamide only in the system     

Synthesis of [2-(vinyloxy)ethyl]uracil and [2-(allyloxy)ethyl]uracil

A synthesis is reported for N¹-mono- and N¹,N³-disubstituted uracil derivatives containing a terminal carbon-carbon double bond in the side-chain. Alkylation of vinyl 2-chloroethyl ether by uracil potassium salts leads to a mixture of 1-[2-(vinyloxy)ethyl] and 1,3-di[2-(vinyloxy)ethyl] derivatives while treatment of 2,4-bis(trimethylsilyloxy)pyrimidines by vinyl 2-chloroethyl ether leads exclusively to N¹-monosubstituted products. Alkylation of cytosine by this chloroether gave 1-[2-(vinyloxy)ethyl]cytosine. The synthesis of 1-[2-(allyloxy)ethyl]uracil derivatives was carried out by treatment of uracil potassium salts by 1-(allyloxy)-2-(p-toluenesulfonyloxy)ethane.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 393–397, March, 1993.     

Base promoted facile route to functionalized benzo[b][1,8]naphthyridin-2-(1H)-ones from N-benzyl-N-(3-cyanoquinolin-2-yl)acetamides

A facile synthesis of 4-amino-N-benzylbenzo[b][1,8]naphthyridin-2(1H)-ones 3 is described from N-benzyl-N-(3-cyanoquinolin-2-yl)acetamides 2 with t-BuOK in excellent yields in mild conditions. These reactions proceeded at room temperature under aerobic atmosphere in very short period. The cyclization reactions were also extended with N-alkyl amino acetamide analogues affording the products in good yields.     

Stereoselective synthesis of cis and trans-fused 3a-aryloctahydroindoles using cyclization of N-vinylic α-(methylthio)acetamides: synthesis of (−)-mesembrane

Treatment of N-(2-arylcyclohex-1-en-1-yl)-α-(methylthio)acetamides with N-chlorosuccinimide (NCS) gave 3a-aryl-2,3,3a,4,5,6-hexahydro-3-(methylthio)indol-2-ones. Desulfurization of the cyclization products followed by a catalytic hydrogenation of the resulting hexahydroindol-2-ones gave predominantly or exclusively trans-fused octahydroindol-2-ones. On the other hand, reduction of the desulfurization products with Et₃SiH in CF₃CO₂H exclusively provided cis-fused octahydroindol-2-ones. A chiral induction of N-[2-(3,4-dimethoxy)phenylcyclohex-1-en-1-yl]-α-(methylthio)acetamide having an (R)-1-(1-naphthyl)ethyl group on the nitrogen atom led to the synthesis of (−)-mesembrane and (−)-trans-mesembrane.     

Synthesis, structural studies and desilylation reactions of some N-2-(trimethylsilyl)ethyl-N-nitrosocarbamates

The present report describes the preparation and characterization of several N-2-(trimethylsilyl)ethyl-N-nitrosocarbamates, designed as precursors to thermally unstable secondary N-nitrosocarbamate anions via fluoride-assisted cleavage. X-ray structural studies demonstrate that the core N-nitrosocarbamate moiety has a nearly planar geometry, with an s-E orientation at the N-N bond. DFT calculations (B3LYP/6-31+G(d)) reproduce accurately the structural features of the title compounds and detailed conformational analysis at the same level of theory addresses the long-standing issue of preferred geometries for three classes of related structures: N-nitrosocarbamates, N-nitrosoureas and N-nitrosoamides. Desilylation studies demonstrate that both the solvent and the fluoride concentration influence the rate of the process.     

Vinyl monomers bearing chromophore moieties and their polymers. V. Synthesis and fluorescence behavior of a vinyloxy monomer bearing electron-accepting chromophore moiety,N-(2-(vinyloxy)ethyl)-1,8-naphthalimide,and its polymer

A vinyloxy monomer bearing electron-accepting chromophore, N-(2-(vinyloxy)ethyl)-1,8-naphthalimide (VOENI), was synthesized by reaction of potassium 1,8-naphthalimide with 2-chloroethyl vinyl ether. VOENI can be homopolymerized by cationic initiation and copolymerized with maleic anhydride (MAn) under radical initiation. The fluorescence behaviors of VOENI and its polymers were investigated. It has been found that the fluorescence intensity of the VOENI monomer is much lower than that of its polymers at the same chromophore concentration. This means that a “structural self-quenching effect” (SSQE) has been also observed in the vinyloxy monomer consisting of an electron-accepting chromophore, which has opposite electronic structure in comparison with acrylates bearing electron-donating chromophores as we have reported previously. The SSQE is attributed to the charge-transfer interaction between the electron-accepting chromophore and the electron-donating double bond in the same molecule. The fluorescence quenching of 1,8-naphthalic anhydride and P(VOENI-co-MAn) by ethyl vinyl ether (EVE), dihydrofuran, triethylamine (TEA), etc. evidences that the electron-rich vinyloxy group does act as an important role in the SSQE of VOENI. C₆₀ can also quench the fluorescence of the polymers, and an upward deviation from the linearity of the Stern–Volmer plot was observed showing that C₆₀ acted as a powerful electron donor to quench the fluorescence of the copolymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1111–1116, 1998     

PTSA catalyzed straightforward protocol for the synthesis of 2-(N-acyl)aminobenzimidazoles and 2-(N-acyl)aminobenzothiazoles in PEG

An efficient PTSA catalyzed synthesis of 2-(N-acyl)aminobenzimidazoles and 2-(N-acyl)aminobenzothiazoles has been described using S-ethylated-N-acylthioureas as substrates and polyethylene glycol as solvent.     

Synthesis of aza-analogues of Ganciclovir

Aza-analogues of ganciclovir have been prepared via coupling of nucleobases with N-[2-pivaloyloxy-1-(pivaloyloxymethyl)ethyl]methanesulfonamide or 3-mesyl-4-(benzoyloxymethyl)-1,3-oxazolidine.     

N-[1-(Benzotriazol-1-yl)alkyl]amides from N-acyl-α-amino acids or N-alkylamides

A variety of N-(1-methoxyalkyl)amides react with benzotriazole in the presence of PPh₃·HBF₄ and organic bases (Hünig's base, DBU or DABCO) or solid-state-supported bases (SiO₂-Pip or IRA-67) in CHCl₃ to give N-[1-(benzotriazol-1-yl)alkyl]amides in good yields. The most convenient and efficient procedure for obtaining N-[1-(benzotriazol-1-yl)alkyl]amides consists, however, of the addition of benzotriazole sodium salt to a solution of crude 1-(N-acylamino)alkyltriphenylphosphonium salt, obtained in situ from N-(1-methoxyalkyl)amides and PPh₃·HBF₄. A combination of these reactions with the recently described electrochemical decarboxylative α-methoxylation of N-acyl-α-amino acids in the presence of SiO₂-Pip enables an effective two-pot transformation of N-acyl-α-amino acids to N-[1-(benzotriazol-1-yl)alkyl]amides.     

A versatile synthesis of poly(lauryl acrylate) using N-(n-octyl)-2-pyridylmethanimine in copper mediated living radical polymerization

A facile synthesis of poly(lauryl acrylate) has been achieved by atom transfer radical polymerization using benzyl-2-bromoisobutyrate, copper (I) bromide, and N-(n-octyl)-2-pyridylmethanimine (OPMI). The latter was of great interest as its synthesis was very easy to carry out and as it allowed the reaction mixture to be homogeneous, which was essential for the control of the reaction. The polymerization was controlled under these conditions and was optimized with the addition of copper (II) bromide as deactivator. We proved that the synthesis of poly(lauryl acrylates) with well defined molecular weights and narrow polydispersities was possible using a ligand which does not require difficult synthesis and purification. We also showed the ability of pyridylmethanimine ligands to control ATRP of an acrylate derivative. Best results were obtained at 130 °C in xylene for [Initiator]₀/[Cu(I)Br]₀/[Cu(II)Br₂]₀/[OPMI]/[lauryl acrylate] equal to 1/1/0.05/2.2/181, respectively (M_n = 19,942, DPI = 1.28).     

Synthesis of new derivatives of 1,5,9,13-tetraaza[16]annulene using 2-substituted vinamidinium salts

New 7,15-dibromo-, 7,15-di(bromomethyl)-, and 7,15-di[4-(bromomethyl)phenyl]-1,5,9,13-tetraaza[16]annulene derivatives are synthesized via the condensation reaction of 2-substituted vinamidinium salts [2-substituted 3-(dimethylamino)-N,N-dimethyl-2-propen-1-aminium salts] with 1,8-diaminonaphthalene in acetonitrile/acetic acid. The ultraviolet spectral behavior of these compounds is examined in DMSO.     

Identification and determination of carboxylic acids in food samples using 2-(2-(anthracen-10-yl)-1H-phenanthro[9,10-d]imidazol-1-yl)ethyl 4-methylbenzenesulfonate (APIETS) as labeling reagent by HPLC with FLD and APCI/MS

A new labeling reagent for carboxylic acids, 2-(2-(anthracen-10-yl)-1H-phenanthro[9,10-d]imidazol-1-yl)ethyl 4-methylbenzenesulfonate (APIETS) has been designed and synthesized. It was used to label eight fatty acids (lauric acid, myristic acid, palmitic acid, stearic acid, arachidic acid, oleic acid, linoleic acid and linolenic acid) and four hydroxy pentacyclic triterpene acids (oleanolic acid, ursolic acid, betulinic acid and maslinic acid), successfully. APIETS could easily and quickly label carboxylic acids in the presence of K₂CO₃ catalyst at 85 °C for 35 min in N,N-dimethylformamide solvent. The carboxylic acids derivatives were separated on a C₈ reversed-phase column with gradient elution and fluorescence detection at λ_ex/λ_em = 315/435 nm. Identification of these derivatives was carried out by online mass spectrometry with atmospheric pressure chemical ionization in positive ion mode. The detection limits obtained were 13.37-30.26 fmol (signal-to-noise ratio of 3). The proposed method has been applied to the quantification of carboxylic acids in sultana raisin (Thompson seedless), hawthorn flake (Crataegus pinnatifida Bge.), Lycium barbarum seed oil and Microula sikkimensis seed oil with recoveries over 95.3%. It has been demonstrated that APIETS is a prominent labeling reagent for determining carboxylic acids with high performance liquid chromatography.     

Domino reaction of 3-nitro-2-(trifluoromethyl)-2H-chromenes with 2-(1-phenylalkylidene)malononitriles: synthesis of functionalized 6-(trifluoromethyl)-6H-dibenzo[b,d]pyrans and a rare case of [1,5] sigmatropic shift of the nitro group

A variety of functionalized 6-(trifluoromethyl)-6H-dibenzo[b,d]pyrans were easily synthesized in good yields under mild conditions by a domino reaction of 3-nitro-2-(trifluoromethyl)-2H-chromenes with 2-(1-phenylethylidene)- and 2-(1-phenylpropylidene)malononitriles. In the latter case, intermediate 7-amino-10-methyl-10-nitro-9-phenyl-6-(trifluoromethyl)-10,10a-dihydro-6H-benzo[c]chromene-8-carbonitriles were isolated as a result of a rare [1,5] sigmatropic shift of the nitro group.     

Synthesis of fused thiazolo[3,2-a]pyrimidinones: N-aryl-2-chloroacetamides as doubly electrophilic building blocks

2-Chloro-N-phenylacetamide and N-(benzo[d]thiazol-2-yl)-2-chloroacetamide are doubly electrophilic building blocks for the formation of ring annulated thiazolo[3,2-a]pyrimidinone products. This synthetic route involves formation of the title compound in acceptable product yields by the elimination of the by-product, aniline/2-aminobenzothiazole. Analytical and spectral studies, as well as single crystal X-ray data on the representative compound 6c confirmed the structure of all the reaction products.     

Synthesis and optical properties of conjugated N,N-dimethyl and thienyl end-capped 2,5-(arylethynyl)thiophene oligomer structures

End-capped (N,N-dimethylaminophenyl) and 2′-thienylethynyl 2,5-thiophene oligomer structures were synthesized by heterocoupling between the terminal acetylenes such as: p-(N,N-dimethylaminophenyl)ethyne (3) [or 1-(p-(N,N-dimethylaminophenyl)-2-p-(ethynylphenyl)ethyne, 4]; p-(β-ethenyl-2′-thienyl)phenylethyne (E-9) [or p-(β-ethynyl-2′-thienyl)phenylethyne, 11], and 2,5-diiodothiophene, catalyzed by the Cl₂Pd(PPh₃)₂/CuI system, in good to excellent yields. The 2,5-di[(3′,5′-di(trimethylsilylethynyl)phenyl]_x-1-ethynyl]thiophene oligomers were prepared by heterocoupling between 3′,5′-di[(trimethylsilylethynyl)phenyl]_x-1-ethyne (n = 0-2) terminal acetylenes and 2,5-diiodothiophene, in excellent yields. The terminal acetylenes were efficiently prepared by a specific protection-deprotection methodology. All the ethynylphenyl compounds obtained show fluorescence radiation emission, with a bathochromic shift of the wavelength that increases with the chain conjugation.