On the oxidative coupling of N,N-disubstituted 2-aminothiophenes—synthesis of N,N′-persubstituted 5,5′-diamino-2,2′-bithiophenes

The oxidative coupling of N,N-disubstituted 2-aminothiophenes performed by several heavy-metal free oxidizing agents gives rise to the formation of N,N′-persubstituted 5,5′-diamino-2,2′-bithiophenes which are of interest as hole-transport materials for optoelectronic applications.     

Efficient synthesis of 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe2; OMe) by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene or by heterocoupling of 3,3′,5,5′-tetraethynylbiphenyl with p-X-phenylbromobenzene with nickel or palladium complexes, respectively

The conjugated 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl derivatives were efficiently obtained by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene mediated by zero-valent nickel complexes.The 1-bromo-3,5-di(p-X-phenylethynyl)benzene was previously prepared by heterocoupling between 1-bromo-3,5-di(ethynyl)benzene and p-X-iodobenzene (X: NMe₂; OMe) catalysed by the palladium/copper system in good yield. The necessary 1-bromo-3,5-di(ethynyl)benzene was obtained by heterocoupling between 1,3,5-tribromobenzene and 2-methyl-3-butyn-2-ol catalysed by palladium and successive treatment with sodium hydroxide in dry toluene, in good yield.The same 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe₂; OMe) derivatives were alternatively synthesised in highest yield by heterocoupling between 3,3′,5,5′-tetra(ethynyl)biphenyl and p-X-bromobenzene (X: NMe₂; OMe) catalysed by palladium in excellent yields. Previously, 3,3′,5,5′-tetra(ethynyl)biphenyl was obtained in practically quantitative yield by homocoupling of 1-bromo-3,5-di[4-(2-methyl-3-butyn-2-ol)] benzene mediated by the zero-valent nickel complex to the 3,3′,5,5′-tetra{di[4-(2-methyl-3-butyn-2-ol)]}biphenyl followed the treatment with sodium hydroxide.     

Facile synthesis of 6-iodo-2,2′-dipivaloyloxy-1,1′-binaphthyl, a key intermediate of high reactivity for selective palladium-catalyzed monofunctionalization of the 1,1′-binaphthalene core

A high-yielding procedure for selective monoiodination of 2,2′-dihydroxy-1,1′-binaphthyl (BINOL) is reported. 6-Iodo-2,2′-dipivaloyloxy-1,1′-binaphthyl, obtained in three steps starting from BINOL in 88% overall yield, proved to be a highly efficient substrate in various palladium-catalyzed coupling (Stille, Heck, Sonogashira, and Suzuki coupling) and carbonylation reactions compared to the analogous 6-bromo derivative.     

Scandium triflate-catalyzed 6,6′-diiodination of 2,2′-dimethoxy-1,1′-binaphthyl with 1,3-diiodo-5,5-dimethylhydantoin

Scandium triflate-catalyzed iodination of 2,2′-dimethoxy-1,1′-binaphthyl with 2 equiv of 1,3-diiodo-5,5-dimethylhydantoin (DIH) proceeded to give 6,6′-diiodo-2,2′-dimethoxy-1,1′-binaphtyl in 98% yield and subsequent deprotection of methyl groups provided 6,6′-diiodo-1,1′-binaphthol, which is a useful ligand or reagent for many enantioselective transformations. Use of 2 equiv of NIS in place of DIH in the presence of scandium triflate, however, did not successfully yield 6,6′-diiodo-2,2′-dimethoxy-1,1′-binaphtyl, indicating that one of two types of iodine atoms in DIH is more reactive toward the iodination than iodine in NIS.     

Efficient bimetallic titanium catalyst for carbonyl-ene reaction

A new family of achiral 3,3′,5,5′-tetrasubstituted-2,2′,6,6′-tetrahydroxy biphenyl ligand 4 was developed. The axial chirality of the ligand could be induced by the chelation of 2,2′,6,6′-tetrahydroxy groups with (R)-BINOL-Ti(OⁱPr)₂ to form an axially chiral bimetallic titanium catalyst 9. Compared with (R)-BINOL-Ti(OⁱPr)₂ catalyst, this novel catalyst 9 exhibited excellent activity and enantioselectivity for the carbonyl-ene reaction of methylstyrene and ethyl glyoxylate. 3,3′,5,5′-Tetrasubstituted groups showed a remarkable effect on both enantioselectivity and yield. With 9d prepared from 3,3′,5,5′-tetramethyl-2,2′,6,6′-tetrahydroxy biphenyl 4d as the catalyst, the best result, up to 97.6% ee and 99% yield, was obtained. Additionally, the bimetallic catalyst 9 also showed better catalytic capability than the corresponding monometallic catalyst.     

Synthesis and characterizations of 3,3′-bis(diphenylphosphinoamine)-2,2′-bipyridine and 3,3′-bis(diphenylphosphinite)-2,2′-bipyridine and their chalcogenides

New bis(phosphinoamine) and bis(phosphinite) derivatives of 2,2′-bipyridine were prepared through a single step reaction of 3,3′-diamino-2,2′-bipyridine or 3,3′-dihydroxy-2,2′-bipyridine with diphenylchlorophosphine, respectively. Their P = E chalcogenides (E = O, S, Se) were also prepared. All the new compounds were characterized by elemental analysis, IR and NMR spectroscopies. The molecular structure of 3,3′-bis(diphenylthiophosphinite)-2,2′-bipyridine was elucidated by single-crystal X-ray crystallography.     

An efficient synthesis of 5,5′-diaryl-2,2′-bichalcophenes

A convenient and high yielding synthesis of 5,5′-diaryl-2,2′-bichalcophenes (furans, thiophenes, and selenophenes) by the hexabutylditin-mediated homocoupling of 5-bromochalcophenes is described. This approach has been applied to the synthesis of the blue-light-emitting compound 5,5′-bis(4-aminophenyl)-2,2′-bifuryl (PFDA).     

The first approach to optically active 2,2′-bipyridine alkyl sulfoxides

The synthesis of 6,6′-bis(alkylsulfanyl)-2,2′-bipyridines and their asymmetric oxidation to non-racemic 2,2′-bipyridine alkyl sulfoxides using either (+)-(8,8-dichlorocamphorylsulfonyl)oxaziridine or a modified Sharpless reagent is reported.     

A convenient synthesis of substituted 2,2′:6′,2″-terpyridines

The 2,2′:6′,2″-terpyridines 7a-c were prepared in good yield by reacting α-acetoxy-α-chloro-β-keto-esters 3a-c with bis-amidrazone 4 and 2,5-norbornadiene 6 in ethanol at reflux. Compounds 3a and 3b gave the 2,2′:6′,2″-terpyridines 9a and 9b, respectively, in moderate yield when treated with compound 4 and enamine 8.     

A simple one-pot synthesis of functionalised 6-(indol-3-yl)-2,2′-bipyridine derivatives via multi-component reaction under neat condition

A series of 4-aryl-6-(1H-indol-3-yl)-2,2-bipyridine-5-carbonitrile derivatives were synthesized via a one-pot multi-component reaction of aromatic aldehydes, 3-(cyanoacetyl)indole and 2-acetyl pyridine in ammonium acetate by conventional heating and microwave irradiation under solvent-free condition. Also a series of 6,6′-di(1H-indol-3-yl)-4,4′-diaryl-2,2′-bipyridine-5,5′-dicarbonitrile derivatives were synthesized using cinnamils, 3-(cyanoacetyl)indole and ammonium acetate. The methodology affords high yields of product at short reaction time.     

Synthesis of 5,5′-diarylated 2,2′-bithiophenes via palladium-catalyzed arylation reactions

2,2′-Bithiophene and 3,3′-dicyano-2,2′-bithiophenes are diarylated directly with aryl bromides at the 5- and 5′-positions accompanied by C-H bond cleavage in the presence of Pd(OAc)₂ and a bulky phosphine ligand using Cs₂CO₃ as base. In the reaction using (2,2′-bithiophen-5-yl)diphenylmethanol as the substrate, monoarylation at the 5-position via C-C bond cleavage occurs selectively to give 5-aryl-2,2′-bithiophenes and the subsequent arylation with a different aryl bromide affords the corresponding unsymmetrically 5,5′-diarylated products.     

The highly regiospecific synthesis and crystal structure determination of 1,1′-2,5′ substituted ring-locked ferrocenes

1,1′-Ferrocene biscarboxaldehyde (1) has been prepared and the aldehyde groups were subsequently protected with acetal groups to produce 1,1′-bisacetalferrocene (2). A ring-locked ferrocene was synthesised by further derivatisation of the cyclopentadiene rings at the 2,2′ positions with phosphine substituents to produce 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene (3), which was subsequently coordinated to either a nickel chloride (5) or nickel bromide (6) metal centre. The ring-locked ferrocene complexes produced 2,5′-bis-(acetal)-1,1′-diphenylphosphinoferrocene substitution patterns. The acetal protecting groups of 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene were removed to produce 1,1′-bis-carboxaldehyde-2,2′-diphenylphosphinoferrocene (4). The Cp rings of 1,1′-bisacetalferrocene were also further derivatised at the 2,2′ positions with a silane to produce the ring-locked 1,1′-siloxane-2,5′-bisacetalferrocenophane (7). The acetal protecting groups were removed from this to produce 1,1′-siloxane-2,5′-ferrocenophanecarboxaldehyde (8). For both the phosphine and siloxane electrophiles, the substitution on the Cp rings gives chiral products (obtained as racemic mixtures). Due to the highly regioselective nature of the reaction and diastereoselectivity in the products only C₂-symmetric compounds were observed without the presence of meso diastereoisomers. Subsequent ring-locking forced the Cp rings to rotate, leading to 1,1′-ring-locked ferrocenes with 2,5′-arrangement of the acetal groups (i.e. on opposite faces of the ferrocene unit).     

Facile acid-catalyzed condensation of 2-hydroxy-2,2′-biindan-1,1′,3,3′-tetrone with phenols, methoxyaromatic systems and enols

Various phenols, methoxy aromatic compounds, 3- and 4-hydroxycoumarins and enols smoothly condense with 2-hydroxy-2,2′-biindan-1,1′,3,3′-tetrone 1 in an acid medium producing 2-aryl/alkyl-2,2′-biindan-1,1′,3,3′-tetrones in high yields. The adducts of resorcinol, 1,3,5-trihydroxybenzene and α- and β-naphthols of 1 preferably remain in the intramolecular hemi-ketal form, confirmed by X-ray diffraction studies. On the other hand para and meta substituted phenols condense with 1 in an acid medium to produce 6 or 7 substituted 2′,4-spiro(1′,3′-indanedion)-indeno[3,2-b]chromenes in good yields.     

5,5′-二甲基-2,2′-二茚满-1,1′,3,3′-四酮的合成及结构表征

本文以4-甲基邻苯二甲酸酐为原料, 成功地合成了5,5′-二甲基-2,2′-二茚满-1,1′,3,3′-四酮(2). 通过元素分析、核磁共振、红外光谱及质谱等测试手段, 确定了化合物2的结构与存在形式, 通过ESR测试发现化合物2具有顺磁性.     

A convenient synthesis of substituted 2,2′:6′,2″-terpyridines

The 2,2′:6′,2″-terpyridines 8a and 8b were prepared in good yield by reacting α-acetoxy-α-chloro-β-keto-esters 1 (R¹ = ⁿPr and Ph) with the bis-amidrazone 7 and 2,5-norbornadiene 5 in ethanol at reflux.     

Synthesis and crystal structure of 2′-deoxy-2′-fluoro-4′-thioribonucleosides: substrates for the synthesis of novel modified RNAs

We report herein the synthesis of appropriately protected 2′-deoxy-2′-fluoro-4′-thiouridine (5), -thiocytidine (7), and -thioadenosine (35) derivatives, substrates for the synthesis of novel modified RNAs. The synthesis of 5 and 7 was achieved via the reaction of 2,2′-O-anhydro-4′-thiouridine (3) with HF/pyridine in a manner similar to that of its 4′-O-congener whereas the synthesis of 35 from 4′-thioadenosine derivatives was unsuccessful. Accordingly, 35 was synthesized via the glycosylation of the fluorinated 4-thiosugar 25 with 6-chloropurine. The X-ray crystal structural analysis revealed that 2′-deoxy-2′-fluoro-4′-thiocytidine (8) adopted predominately the same C3′-endo conformation as 2′-deoxy-2′-fluorocytidine.     

Investigation on the thermal degradation of acrylic polymers with fluorinated side-chains

The thermal degradation of poly-2,2′,3,3′,4,4′,5,5′,6,6′,7,7′,7″-tridecafluoroheptylacrylate and poly-2,2′,3,3′,4,4′,5,5′,6,6′,7,7′-dodecafluoroheptylmethacrylate has been studied in isothermal conditions at 450-750 °C using pyrolysis-gas chromatography. The type and composition of the pyrolysis products give useful information about mechanism of thermal degradation. It was shown that the main thermal degradation process for both polymers is random main-chain scission. The major degradation products for fluorinated polyacrylate are monomer, dimer, saturated diester, trimer, and corresponding methacrylate. The fluorinated polymethacrylate gives monomer as the main product of thermal destruction. As a result of side-chain reaction, the thermal degradation of the fluorinated polyacrylate also produces remarkable amounts of alcohol. On the other hand, the respective alcohol is only a minor component among the pyrolysis products of the fluorinated polymethacrylate. For both polymers, the main nontrivial degradation product coming from the alkyl ester decomposition is the corresponding fluorinated cyclohexane. The formation of the fluorinated cyclohexanes may be accounted for a nucleophilic bimolecular substitution pathway.     

The redox behaviour of cyclic tetraaminoethenes derived from 2,2′-biimidazole

Syntheses and redox chemistry of the nearly unknown 4,4′,5,5′-tetraamino derivatives of 2,2′-biimidazole are studied. These cyclic versions of electron-rich ethenes are only stable under strictly anaerobic conditions. In the presence of oxygen, a fast oxidation reaction occurs to form stable, deeply coloured tetraazafulvalenes. Leuco-forms, however, can be stabilized towards air by acylation reactions. This accounts for the hexa-Boc derivative 6. Based on these findings, we present the first synthesis of tetraazafulvalenes, which possess four peripheric secondary amine functions.     

Acid-catalyzed condensation of 2,2′-diamino-1,1′-biaryls for the synthesis of benzo[c]carbazoles

2,2′-Diamino-1,1′-biaryls were found to undergo ring-closure condensation reaction to afford benzo[c]carbazoles in good to excellent yield. Coupled with the synthesis of 2,2′-biaryldiamines from diaryl hydrazides via [3,3]-sigmatropic rearrangement, it constitutes a new efficient synthetic method for benzo[c]carbazoles and related compounds.     

Synthesis of phosphocyclic 2,2′,7,7′-tetrahydroxydinaphthylmethane derivatives

Two types of phosphocyclic derivatives were synthesized by phosphorylation of 2,2′,7,7′-tetrahydroxydinaphthylmethane with triamidophosphites: triphosphorus containing compounds with a phosphocine ring and two acyclic diamidophosphite fragments, and tetraphosphorus-containing macrocycles with a 24-membered ring and two eight-membered phosphorus rings. It was shown that interaction of triphosphorus compounds with resorcinarene gives tetraphosphorus macrocycles.