Orthopalladated complexes of phosphorus ylide: Poly(N‐vinyl‐2‐pyrrolidone)‐stabilized palladium nanoparticles as reusable heterogeneous catalyst for Suzuki and Heck cross‐coupling reactions

The phosphorus ylide [Ph₃PCHC(O)C₆H₄‐NO₂–4] reacted with Pd(OAc)₂ to give the C,C‐orthometallated complex [Pd{κ²(C,C)‐C₆H₄PPh₂C(H)CO(C₆H₄‐NO₂–4)}(μ‐OAc)]₂, which underwent bridge exchange reaction with NaN₃, NaCl, KBr and KI, respectively, to afford the binuclear C,C‐orthopalladated complexes [Pd{κ²(C,C)‐C₆H₄PPh₂C(H)CO(C₆H₄‐NO₂–4)}(μ‐X)]₂ (X = N₃ ( 1 ), Cl ( 2 ), Br ( 3 ) and I ( 4 )). The complexes were identified using spectroscopy (infrared and NMR), CHNS technique and single‐crystal X‐ray structure analysis. Thereafter, palladium nanoparticles with narrow size distribution were easily prepared using the refluxing reaction of iodo‐bridged orthopalladated complex 4 with poly(N ‐vinyl‐2‐pyrrolidone) (PVP) as the protecting group. The PVP‐stabilized palladium nanoparticles were characterized using a variety of techniques including X‐ray diffraction, transmission and scanning electron microscopies, energy‐dispersive X‐ray spectroscopy, inductively coupled plasma analysis and Fourier transform infrared spectroscopy. The catalytic activity of the PVP‐stabilized palladium nanoparticles was evaluated in the Suzuki reaction of phenylboronic acid and the Heck reaction of styrene with aryl halides of varying electron densities. This catalyst exhibited excellent catalytic activity for Suzuki cross‐coupling reactions in ethanol–water. Notably, aryl chlorides which are cheaper and more accessible than their bromide and iodide counterparts also reacted satisfactorily using this catalyst. After completion of reactions, the catalyst could be separated using a simple method and used many times in repeat cycles without considerable loss in its activity.     

Recyclable N-heterocyclic carbene/palladium catalyst on graphene oxide for the aqueous-phase Suzuki reaction

Graphene oxide (GO) was functionalized with a N-heterocyclic carbene (NHC) precursor, 3-(3-aminopropyl)-1-methylimidazolium bromide ([APMIm][Br]) for the immobilization of palladium catalyst. The GO-supported NHC precursor (IMGO) formed a stable complex with Pd(OAc)₂ (GO–NHC–Pd), which showed excellent catalytic activity and fast reaction kinetics in the aqueous-phase Suzuki reaction of aryl bromides and chlorides at relatively mild conditions (1 h at 50 °C). The GO–NHC–Pd catalyst was reused several times without any loss of its catalytic activity in the Suzuki reaction of aryl bromide.     

Synthesis of regioregular poly(3‐octylthiophene)s via Suzuki polycondensation and end‐group analysis by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Regioregular poly(3‐octylthiophene)s were synthesized through a palladium‐catalyzed Suzuki polycondensation of 2‐(5‐iodo‐4‐octyl‐2‐thienyl)‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane. The effects of the palladium catalyst {tetrakis(triphenylphosphine)palladium(0) [Pd(PPh₃)₄], palladium(II) acetate [Pd(OAc)₂], [1, 1′‐bis(diphenylphosphino)ferrocene]dichloropalladium(II) [Pd(dppf)Cl₂], tris(dibenzylideneacetone)dipalladium(0), or bis(triphenylphosphine)palladium(II) dichloride [Pd(PPh₃)₂Cl₂]} and the reaction conditions (bases and solvents) were investigated. NMR spectroscopy revealed that poly(3‐octylthiophene)s prepared via this route were essentially regioregular. According to size exclusion chromatography, the highest molecular weights were obtained with in situ generated Pd(PPh₃)₄ and tetrakis(tri‐o‐tolylphosphine]palladium(0) {Pd[P(o‐Tol)₃]₄} catalysts or more reactive, phosphine‐free Pd(OAc)₂. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry was used to analyze end groups and allowed the determination of some mechanistic aspects of the Suzuki polycondensation. The polymers were commonly terminated with hydrogen or iodine as a result of deboronation and some deiodination. Pd(PPh₃)₄, Pd(PPh₃)₂Cl₂, and Pd[P(o‐Tol)₃]₄ induced aryl–aryl exchange reactions with the palladium center and resulted in some chains having phenyl‐ and o‐tolyl‐capped chain ends. Pd(dppf)Cl₂ yielded only one type of chain, and it had hydrogen end groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1454–1462, 2005     

Finely dispersed palladium on silk‐fibroin as an efficient and ligand‐free catalyst for Heck cross‐coupling reaction

A palladium–fibroin complex (Pd/Fib.) was prepared by the addition of sonicated fibroin fiber in water to palladium acetate solution. Pd (OAc)₂ was absorbed by fibroin and reduced with NaBH₄ at room temperature to the Pd(0) nanoparticles. Powder‐X‐ray diffraction, scanning electron microscopy–energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, CHN elemental analysis and inductively coupled plasma‐atomic emission spectroscopy were carried out to characterize the Pd/Fib. catalyst. Catalytic activity of this finely dispersed palladium was examined in the Heck coupling reaction. The catalytic coupling of aryl halides (‐Cl, ‐Br, ‐I) and olefins led to the formation of the corresponding coupled products in moderate to high yields under air atmosphere. A variety of substrates, including electron‐rich and electron‐poor aryl halides, were converted smoothly to the targeted products in simple procedure. Heterogeneous supported Pd catalyst can be recycled and reused several times.     

Efficient heterogeneous vinylation of aryl halides using potassium vinyltrifluoroborate

An efficient heterogeneously palladium catalysed procedure for the vinylation of aryl iodides and bromides is reported. Using common reaction conditions (Pd/C 2 mol %, AcONa·3H₂O, NMP or NMP/H₂O), good to complete conversions (40-100%) with high selectivities (79-100%) towards the expected vinylaromatic were achieved.     

Ligand Size Effect on PdLn Oxidative Addition with Aryl Bromide: A DFT Study

The process and mechanism of the ligand volume controlled Pd(PR₃)₂ (PR₃=PH₃, PMe₃, and PtBu₃) oxidative addition with aryl bromide were investigated, using density functional theory method with the conductor-like screening model. Association pathway and dissocia-tion pathway were investigated by the comparison of several energies. The cleavage energy of Pd(PR₃)₂ complex was calculated, as well as the oxidative addition reaction barrier energy of Pd(PR₃)_n (n=1,2) with aryl bromide in N,N-dimethylformamide solvent. This study proved that the ligands volume possessed a great impact on the mechanism of oxidative addition: less bulky ligand palladium associated with aryl bromide via two donor ligands,but larger bulky ligand palladium coordinated via monoligand.     

Synthesis of palladium nanoparticles by sonochemical reduction of palladium(II) nitrate in aqueous solution

The sonochemical synthesis of stable palladium nanoparticles has been achieved by ultrasonic irradiation of palladium(II) nitrate solution. The starting solutions were prepared by the addition of different concentrations of palladium(II) nitrate in ethylene glycol and poly(vinylpyrrolidone) (PVP). The resulting mixtures were irradiated with ultrasonic 50 kHz waves in a glass vessel for 180 min. The UV-visible absorption spectroscopy and pH measurements revealed that the reduction of Pd(II) to metallic Pd has been successfully achieved and that the obtained suspensions have a long shelf life. The protective effect of PVP was studied using Fourier transform infrared (FT-IR) spectroscopy. It has been found that, in the presence of ethylene glycol, the stabilization of the nanoparticles results from the adsorption of the PVP chain on the palladium particle surface via the coordination of the PVP carbonyl group to the palladium atoms. The effect of the initial Pd(II) concentration on the Pd nanoparticle morphology has been investigated by transmission electron microscopy. It has been shown that the increase of the Pd(II)/PVP molar ratio from 0.13 x 10(-3) to 0.53 x 10(-3) decreases the number of palladium nanoparticles with a slight increase in particle size. For the highest Pd(II)/PVP value, 0.53 x 10(-3), the reduction reaction leads to the unexpected smallest nanoparticles in the form of aggregates.     

Phosphine-free palladium-catalysed direct 5-arylation of imidazole derivatives at low catalyst loading

The regioselective 5-arylation of imidazole derivatives with aryl bromides using a low loading of a phosphine-free palladium catalyst gives a simple and economic access to the corresponding 5-arylimidazoles. The choice of the base and of the solvent was found to be crucial to form these products in high yields. Using KOAc as the base, DMAc as the solvent and only 0.5-0.01 mol % Pd(OAc)₂ as the catalyst, the target products were obtained in moderate to good yields with a wide variety of aryl bromides. Substituents such as fluoro, trifluoromethyl, formyl, acetyl, propionyl, ester or nitrile on the aryl bromide are tolerated. Sterically congested aryl bromides or heteroaryl bromides can also be employed. The nature of the substituents on the imidazole derivative has an important influence on the yields.     

Hierarchical TiO2 microspheres supported ultrasmall palladium Nanocrystals: A highly efficient catalyst for Suzuki reaction

A hierarchical titanium dioxide microspheres-supported palladium catalyst (Pd/TiO₂-350) was prepared and characterized using BET, XRD, XPS, SEM, EDX, and TEM analyses. An ICP-OES analysis of Pd/TiO₂-350 further confirmed the successful Pd immobilization on TiO₂ with a palladium loading of 0.1 mmol g^?1. Pd/TiO₂-350 efficiently catalyzed the Suzuki-Miyaura reaction of aryl iodides with arylboronic acids to give the corresponding biaryl derivatives in good to excellent yields. After the reaction, the catalyst was recovered by centrifugation and reused three times without significant loss of its catalytic activity. Moreover, the loading of palladium species further decreased to 0.001 mol%, and the total turnover number and turnover frequency of the catalyst reached as high as 99 000 and 0.57 s^?1, respectively.     

A new palladium complex supported on magnetic nanoparticles and applied as an catalyst in amination of aryl halides,Heck and Suzuki reactions

A simple, efficient and less expensive protocol for the phosphine-free C–C coupling reactions and synthesis of anilines in the presence of 2-aminobenzamide complex of palladium supported on Fe₃O₄ magnetic nanoparticles (Pd(0)-ABA-Fe₃O₄) has been reported. The Suzuki reaction was carried out in water or PEG using phenylboronic acid (PhB(OH)₂) or sodium tetraphenyl borate (NaBPh₄). Pd(0)-ABA-Fe₃O₄ has been found promising for Heck reaction of butyl acrylate, styrene or acrylonitrile with aryl halides (including Cl, Br and I). Also, Pd(0)-ABA-Fe₃O₄ has been found as efficient catalyst for the amination of aryl halides using aqueous ammonia. The products have been obtained in short reaction times and high yields. The catalyst was easily separated using an external magnet from the reaction mixture and reused for several runs without significant loss of its catalytic efficiency or palladium leaching. The leaching of catalyst has been examined by hot filtration and ICP-OES technique. The nanomagnetical catalyst was characterized by FTIR, TGA, XRD, VSM, TEM, SEM, EDS, DLS and ICP-OES techniques.     

Pd(0) complex of fuberidazole modified magnetic nanoparticles: A novel magnetically retrievable high-performance catalyst for Suzuki and Stille C-C coupling reactions

Fuberidazole has been successfully immobilized onto nano-Fe₃O₄ supported (3-chloropropyl)trimethoxysilane (3-CPTS) leading to a novel functionalized magnetic nanoparticle (FB/MNP). The Pd(0) complex, Pd-FB/MNP, was prepared by grafting Pd (OAc)₂ on FB/MNP and subsequent reduction of a synthesized Pd (II) complex using NaBH₄. Pd-FB/MNP has been characterized by FT-IR, SEM, TGA, XRD, ICP, EDS, BET and VSM. The Pd(0) complex proved to be an efficient phosphine- and halide-free recyclable heterogeneous catalyst for Suzuki as well as for Stille C-C coupling reactions showing high catalytic activity (up to 98%). Its catalytic activity in both reactions has been studied in PEG-400 as a green solvent. Besides, the selectivity of aryl iodide and aryl bromide over aryl chloride is observed during the C-C coupling reaction. The catalyst could be recovered easily from the reaction mixture using an external magnet device and recycled several times without considerable loss in activity. Additionally, the results of a palladium leaching test of the nano-catalyst demonstrate that no leaching of Pd took place during the C-C coupling process making the procedure environmentally friendly.     

Palladium catalyzed alkynylation of aryl halides (Sonogashira reaction) in water

The palladium catalyzed alkynylation of aryl halides (Sonogashira reaction) has been achieved in pure water without any additives or phase transfer catalysts. The reaction, which requires only 0.5 mol % of Pd(PPh₃)₄ catalyst, is remarkably fast (30 min at 70 °C) producing high yields of the aryl alkyne products.     

Polycondensation of haloarylketones catalyzed by palladium compounds bearing N-heterocyclic carbene (NHC) ligands

Palladium-catalyzed α-arylation of ketones, which can efficiently give coupling products by using appropriate ligands and bases, could be applied to a polycondensation reaction. Stable N-heterocyclic carbenes (NHC) were used as favorable ligands coordinating the Pd catalysts, which were generated in situ from commercially available palladium compounds such as Pd(OAc)₂ and Pd₂(dba)₃ as suitable catalyst precursors in this polymerization. Using small amounts of binary catalysts, poly(aryl alkyl ketone)s were afforded in high yields from haloarylketones in the presence of a base. A primarily prepared palladium catalyst having an NHC ligand, [Pd(OAc)₂(NHC)], also efficiently catalyzed the polycondensation, whereas a palladium compound bearing two carbene ligands, [PdX₂(NHC)₂], did not.     

胺基化树脂负载Pd(0)对Heck反应催化性能的研究

将氯球用胺化剂、乙二胺、胍进行胺化后负载氯化钯, 在乙醇溶液中用硼氢化钾还原, 制备了含胺功能基树脂负载钯(0)的催化剂; 研究了催化剂对含各种取代基碘代苯与丙烯酸的Heck芳基化反应催化性能. 结果表明, 该类催化剂具有良好的催化活性和重复使用性能, 其中用乙二胺功能化树脂负载的Pd(0)催化剂在90 ℃重复使用17次时能保持良好的催化活性. 催化剂反应前后的SEM形貌图和过滤液的活性试验表明催化剂活性组分Pd(0)在反应中有沥取(leaching)现象.     

树枝状钯纳米结构的控制合成及硝基苯加氢反应的催化活性

以氯钯酸为前驱体, 苯甲醇为还原剂和溶剂, 十六烷基吡咯烷酮(PVP)为稳定剂, 在微波辐射下制备了分散均匀、形貌均一的树枝状钯纳米结构. 产物用透射电子显微镜(TEM), X射线粉末衍射(XRD), X射线光电子能谱(XPS)进行了表征, 表明所制备的Pd纳米颗粒呈树枝状, 形貌单一, 分散均匀, 是由许多近似圆形的小颗粒自组装而成的二级结构. 对树枝状钯催化硝基苯加氢反应进行探究, 表明树枝状钯的催化活性比市售的钯碳催化剂的催化活性高.     

Effective heterogeneous palladium catalysis of the reactions of organoboron compounds with aryl halides

Reactions of [Ph₄B]Na and ArB(OH)₂ with aryl halides are effectively catalyzed by heterogeneous palladium catalysts (PdCl₂C, Pd(0)/C, and palladium black) to give cross-coupling products in high yields. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1399–1401, July, 1997.     

Palladium-catalyzed homocoupling of aryl halides in the presence of fluoride

This report describes the fluoride-mediated homocoupling of aryl iodides and bromides catalyzed by palladium(0). This coupling protocol is tolerant of electron-donating and electron-withdrawing substitutents on the aryl halide, as well as ortho substitution. Optimum reaction conditions entail 10 mol% Pd(dba)₂, 3 equiv of tetrabutyl ammonium fluoride (TBAF) in DMF at 90 °C.     

Synthesis and catalytic application of Pd complex catalysts: Atom‐efficient cross‐coupling of triarylbismuthines with haloarenes and acid chlorides under mild conditions

Palladium‐catalysed cross‐coupling reactions are some of the most frequently used synthetic tools for the construction of new carbon–carbon bonds in organic synthesis. In the work presented, Pd(II) complex catalysts were synthesized from palladium chloride and nitrogen donor ligands as the precursors. Infrared and ¹H NMR spectroscopic analyses showed that the palladium complexes were formed in the bidentate mode to the palladium centre. The resultant Pd(II) complexes were tested as catalysts for the coupling of organobismuth(III) compounds with aryl and acid halides leading to excellent yields with high turnover frequency values. The catalysts were stable under the reaction conditions and no degradation was noticed even at 150°C for one of the catalysts. The reaction proceeds via an aryl palladium complex formed by transmetallation reaction between catalyst and Ar₃Bi. The whole synthetic transformation has high atom economy as all three aryl groups attached to bismuth are efficiently transferred to the electrophilic partner.     

Pd‐Catalyzed Carbonylative α‐Arylation of Aryl Bromides: Scope and Mechanistic Studies

Reaction conditions for the three‐component synthesis of aryl 1,3‐diketones are reported applying the palladium‐catalyzed carbonylative α‐arylation of ketones with aryl bromides. The optimal conditions were found by using a catalytic system derived from [Pd(dba)₂] (dba=dibenzylideneacetone) as the palladium source and 1,3‐bis(diphenylphosphino)propane (DPPP) as the bidentate ligand. These transformations were run in the two‐chamber reactor, COware, applying only 1.5 equivalents of carbon monoxide generated from the CO‐releasing compound, 9‐methylfluorene‐9‐carbonyl chloride (COgen). The methodology proved adaptable to a wide variety of aryl and heteroaryl bromides leading to a diverse range of aryl 1,3‐diketones. A mechanistic investigation of this transformation relying on ³¹P and ¹³C NMR spectroscopy was undertaken to determine the possible catalytic pathway. Our results revealed that the combination of [Pd(dba)₂] and DPPP was only reactive towards 4‐bromoanisole in the presence of the sodium enolate of propiophenone suggesting that a [Pd(dppp)(enolate)] anion was initially generated before the oxidative‐addition step. Subsequent CO insertion into an [Pd(Ar)(dppp)(enolate)] species provided the 1,3‐diketone. These results indicate that a catalytic cycle, different from the classical carbonylation mechanism proposed by Heck, is operating. To investigate the effect of the dba ligand, the Pd⁰ precursor, [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)], was examined. In the presence of DPPP, and in contrast to [Pd(dba)₂], its oxidative addition with 4‐bromoanisole occurred smoothly providing the [PdBr(Ar)(dppp)] complex. After treatment with CO, the acyl complex [Pd(CO)Br(Ar)(dppp)] was generated, however, its treatment with the sodium enolate led exclusively to the acylated enol in high yield. Nevertheless, the carbonylative α‐arylation of 4‐bromoanisole with either catalytic or stoichiometric [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)] over a short reaction time, led to the 1,3‐diketone product. Because none of the acylated enol was detected, this implied that a similar mechanistic pathway is operating as that observed for the same transformation with [Pd(dba)₂] as the Pd source.     

N‐Heterocyclic carbene/phosphite synergistically assisted Pd/C‐catalyzed Suzuki coupling of aryl chlorides

An N‐heterocyclic carbene and phosphite synergistically enhanced Pd/C catalyst system has been developed for Suzuki coupling of aryl chlorides and aryl boronic acids from commercially available Pd/C with sterically demanding N,N′‐bis(2,6‐diisopropylphenyl)imidazolylidene and trimethylphosphite. A remarkable increase in catalytic activity of Pd/C was observed when used along with 1 equiv. N,N′‐bis(2,6‐diisopropylphenyl)imidazolium chloride and 2 equiv. phosphite with respect to palladium in appropriate solvents that were found to play a crucial role in Pd/C‐NHC‐P(OR)₃‐catalyzed Suzuki coupling. A dramatic ortho‐substitution effect of carbonyl and nitrile groups in aryl chlorides was observed and explained by a modified quasi‐heterogeneous catalysis mechanism. The Pd/C catalyst could be easily recovered from reaction mixtures by simple filtration and only low palladium contamination was detected in the biparyl products. A practical process for the synthesis of 4‐biphenylcarbonitrile has therefore been developed using the N‐heterocyclic carbene/phosphite‐assisted Pd/C‐catalyzed Suzuki coupling. Copyright © 2013 John Wiley & Sons, Ltd.