Synthesis of aminoglycoside derivatives on a Cbz-type heavy fluorous tag

Four aminoglycoside derivatives containing a 2,6-diamino-2,6-dideoxy-d-glucopyranose disaccharide structure were successfully prepared by using a Cbz-type heavy fluorous tag in a fluorous synthesis. A Cbz-type heavy fluorous tag was prepared using the hexakis(fluorous chain)-type alcohol 11, and the fluorous alcohol 11 was recovered in good yield after the synthesis of aminoglycoside derivatives.     

Preparation, properties and synthetic potentials of fluorous boronates

A fluorous approach to the chemistry of boronic acids and its application in fluorous-phase techniques are described. Treatment of fluorous bromosilane 2 with allyl Grignard reagent followed by dihydroxylation provided fluorous diol 1. A series of boronic acids were attached to 1 by esterification. The formed fluorous boronates 4 were moisture sensitive and thus their synthetic potentials were limited. Thus a fluorous pinacol, 5, was designed and synthesized by treatment of fluorous bromosilane 2 with excess 2,3-dimethyl-2-butyenylmagnesium bromide 9 to afford fluorous tetramethyl ethene 8, and was dihydroxylated. Compound 5 was successfully used to prepare fluorous boronates in a one-pot process from organic bromides. We have demonstrated that olefin cross-metathesis can be carried out in a fluorous version. It is noteworthy that all of the fluorinated compounds reported in this paper were purified by simple liquid extraction.     

The synthesis and application of fluorous boronates without perfluorinated solvents

The synthesis of a fluorous diol 4 bearing a perfluorodecyl chain was described. A series of boronic acid were attached to 4 by esterification. The purification of the products was fulfilled by facile filtration instead of expensive and environmental troublesome fluorous liquid-liquid extraction. The Suzuki cross-coupling reactions of the formed fluorous boronates 5 underwent smoothly and the fluorous diol 4 was recycled in good yields.     

Synthesis of monosaccharide units using fluorous method

The efficient synthesis of monosaccharide units, glycosyl acceptor, and donor, by using the fluorous tag method was achieved. Fluorous tag 5 was stable in each reaction condition to the preparation of various monosaccharide units. Each fluorous synthetic intermediate could be obtained in a straightforward manner by a simple fluorous-organic solvent partition.     

Rapid oligosaccharide synthesis on a fluorous support

The novel fluorous support Hfb (hexakisfluorous chain-type butanoyl) was easily prepared. The Hfb group was readily introduced into the anomeric hydroxyl group of a carbohydrate, and was recyclable after cleavage. The use of the Hfb group was applicable for the rapid oligosaccharide synthesis in which the synthetic intermediates could be purified using fluorous and normal organic solvents. Each synthetic intermediate could be monitored by TLC, NMR and mass spectrometry.     

Highly enantioselective aldehyde-nitroolefin Michael addition reactions catalyzed by recyclable fluorous (S) diphenylpyrrolinol silyl ether

A recyclable and reusable (S) diphenylpyrrolinol silyl ether I organocatalyst bearing a n-C₈F₁₇ fluorous tag has been demonstrated for promoting the asymmetric Michael addition reactions of a wide range of aldehydes with both aryl and alkyl-substituted nitroolefins and excellent levels of enantio- and diastereoselectivities are achieved. The catalyst I can be conveniently recovered by fluorous solid-phase extraction and subsequently reused (up to eight cycles) without significant loss of its catalytic activity and stereoselectivity for the process.     

Fluorous glycol derivatives: novel carbonyl protective groups

Fluorous glycol derivatives 5 were prepared and evaluated as reagents for the protection of carbonyl groups for use in fluorous synthesis. The acetals formed from fluorous diol 5b (Rf=n-C₈F₁₇) with carbonyl compounds can be separated and purified by simple fluorous-organic extraction.     

Greener fluorous chemistry: Convenient preparation of new types of ‘CF3-rich’ secondary alkyl mesylates and their use for the synthesis of azides, amines, imidazoles and imidazolium salts

2,2,2-Trifluoroethanol, 1,1,1,3,3,3-hexafluoro-2-propanol, and nonafluoro-tert-butyl alcohol were used as precursors for the preparation of the appropriate bis(polyfluoroalkoxymethyl)carbinols [(R_FHOCH₂)₂CHOH, 1a-c, R_FH = (a) CF₃CH₂, (b) (CF₃)₂CH, and (c) (CF₃)₃C] and the corresponding mesylates [(R_FHOCH₂)₂CHOSO₂CH₃, 2a-c]. This novel design paradigm is introduced to eliminate the persistence and bioaccumulation problems of fluorous chemistry, which are associated with the use of longer linear perfluoroalkyl groups (e.g. R_fn ≥ n-C₈F₁₇, n-C₇F₁₅). Secondary mesylates 2a,b and the primary tosylate [(CF₃)₃COCH₂CH₂OTs, 2d] displayed acceptable reactivity towards azide and imidazole nucleophiles to allow the syntheses of novel fluorous azides, which on hydrogenolysis with H₂/Pd-C offered fluorous amines [(R_FHOCH₂)₂CHNH₂, 8a,b], and 1-(polyfluoroalkyl)imidazoles (5a,b,d), respectively, while 2c showed no reactivity due to steric hindrance. The reaction of 8a,b with formaline, glyoxal and hydrochloric acid gave symmetrical 1,3-dialkylated imidazolium chlorides (9a,b), while 5a,b,d were effectively alkylated using n-C₈F₁₇(CH₂)₃I, methyl iodide, 2-bromoethanol, and 2d to yield the corresponding 1,3-dialkylimidazolium iodides, bromides, and tosylates (7aa-ec). Some physical properties of new compounds including mp, bp and solubility patterns were also analyzed; and the fluorophilicity values of 1a-c, and 2a-c were experimentally determined by GC and/or ¹⁹F NMR spectroscopy.     

Excavatoids A-D, new polyoxygenated briaranes from the octocoral Briareum excavatum

Three polyoxygenated briaranes, including two new compounds, excavatoids A (1) and B (2), and a known metabolite, briaexcavatin I (3), were isolated from the cultured octocoral Briareum excavatum. Moreover, the wild type B. excavatum, collected off southern Taiwan coast, yielded two new 5,6-epoxybriaranes, excavatoids C (4) and D (5). The structures of new compounds 1, 2, 4, and 5 were determined by spectroscopic methods and the structure of 1 was further confirmed by X-ray diffraction data analysis. The X-ray structure for briaexcavatin I (3) was also reported for the first time. Excavatoid A (1) is the first briarane which possesses six hydroxy groups and a 17-methoxy group. Excavatoid C (4) is the first 12,13-secobriarane which possesses a novel pentacyclic skeleton with an ?-lactone. Excavatoid D (5) displayed moderate inhibitory effects on superoxide anion generation and elastase release by human neutrophils.     

Fluorous chiral bisoxazolines. Synthesis and applications to an asymmetric allylic alkylation

The easily accessible fluorous bisoxazolines 3a-b bearing two fluorous ponytails are efficient ligands in the palladium-catalyzed asymmetric allylic alkylation of 1,3-diphenylprop-2-enyl acetate with carbonucleophiles in benzotrifluoride or CH₂Cl₂, enantioselectivities of up to 95% being obtained. The ligand is easily separated from the reaction mixture by simple extraction with a fluorous solvent.     

Cobaloximes with mixed dioximes having C and S side chains: Synthesis, structure and reactivity

Ten mixed dioxime complexes RCo(L)(dmgH)Py [R = Cl, Me, Et, Bu, Benzyl] [L = dSPhgH (1-5) and dSEtgH (6-10)] have been synthesized and characterized by NMR. Formation of 1 and 6 is very fast and takes only 5 and 15 min in ethanol. Molecular oxygen insertion in 5 and 10 is monitored and forms mixture of products within 5 min. The crystal structure of 1, 4, 5, 6, 8 and 10 is reported. Benzyl ring is oriented over dmgH wing in both 5 and 10 and has a weak C-H…π interaction (3.33 Å and 3.22 Å) and this causes high upfield shift of the dmgH protons. Electrochemical study on 1, 4, 5, 6, 8 and 10 is also reported. Because of increased electron donation by SEt group, 6 is more difficult to reduce than 1.     

Solid-state tubular assemblies of thiolactones: synthesis and structural characterization

The synthesis of cyclic thiolactones, 2,5,8-trithiacyclododecane-1,9-dione (4), 2,5,8,14,17,20-hexathiacyclotetracosane-1,9,13,21-tetraone (5), 2,5,8-trithiacyclotetradecane-1,9-dione (6) and 2,5,8,16,19,22-hexathiacyclooctacosane-1,9,15,23-tetraone (7) was achieved by tin-template reaction of 2,2-dibutyl-2-stanna-1,3,6-trithiacyclooctane (1) with corresponding diacyl chlorides. The structures of 12-, 14-, 24- and 28-membered ring systems of 4, 6, 5, and 7, respectively, were investigated by X-ray structure analysis. These investigations revealed that, in the solid-state, thiolactones 4 and 7 form tubular assemblies. However, the crystal structure of 5 forms layered packing dominated by CH?O hydrogen bonds whereas 6 forms three-dimensional network via CH?O hydrogen bonds and van der Waals interactions.     

Structural optimization of cyclic sulfonamide based novel HIV-1 protease inhibitors to picomolar affinities guided by X-ray crystallographic analysis

Synthesis and HIV-1 protease inhibitory activity of compound 5 based on the structure of a novel cyclic sulfonamide pharmacophore has been recently disclosed from our group. X-ray crystallographic structure of 5 when bound to the HIV-1 protease defined its binding mode. The importance of the geometry of the substitution at C4–Me (S configuration) was emphasized. In the present paper we wish to disclose the design of novel inhibitors 47 and 48 based on the X-ray structure of compound 5 bound to the HIV-1 protease, their synthesis and activity against HIV-1 protease. By making changes at the C4 position and the carbamate linkage the above compounds 47 and 48 were found to be approximately one hundred fold more active compared to 5 and their K_i values are in the picomolar range. An unusual observation regarding the activity and geometry was made with compounds 51 and 52. X-ray results demonstrate that 48 and 52 bind to the same binding pocket with simultaneous change in the conformation of the cyclic sulfonamide ring.     

New possibilities of 1,2,4-triazines functionalization: first examples of synthesis and structure of boron-containing 1,2,4-triazines

By oxidation of 3-thioderivatives of 1,2,4-triazine 1a,b 3-alkylsulfonic derivatives 2a,b were obtained. Interaction of the sulfonic derivative 2a with indole leads to 3-oxo-5-indolyl-5-phenyl-as-triazine 4. The sulfone 2a reacts with 1-ethyl-2,6-dimethylquinolinium iodide to give 3-(1-ethyl-6-methyl-1,2-dihydroquinoline-2-methylene)-5-phenyl-1,2,4-triazine 5. The 3-morpholino- 3 and 3-thioderivatives 6, 7a,b of as-triazine were obtained by interaction of the sulfone 2 with morpholine and organic boron-containing thiols. The crystal structure of boron-containing derivative of as-triazine 7b was investigated by X-ray analysis.     

Reactions of 4-substituted 5H-1,2,3-dithiazoles with primary and secondary amines: fast and convenient synthesis of 1,2,5-thiadiazoles, 2-iminothioacetamides and 2-oxoacetamides

The treatment of 5H-1,2,3-dithiazole-5-thiones 1 in chloroform under reflux and 5H-1,2,3-dithiazol-5-ones 2 in THF at room temperature with primary aliphatic amines and benzylamine afforded 1,2,5-thiadiazole-3(2H)-thiones 3 and 1,2,5-thiadiazol-3(2H)-ones 6, respectively. The structure of dithiazolone 3f was confirmed by X-ray diffraction analysis. The reaction of dithiazolone 2e bearing an electron-donating methyl group in the 4-position gave 2-oxoacetamide 7e in high yield. The reaction of thiones 1 with secondary aliphatic amines in DMSO yielded 2-iminothioacetamides 8 in moderate yields together with elemental sulfur. Interestingly, the treatment of dithiazolones 2 with secondary amines under the same conditions afforded 2-oxoacetamides 9—the products of the hydrolysis of corresponding imino derivatives 10, which was isolated as 10b. A general mechanism was proposed for the formation of the products.     

Catalytic enantioselective cyclopropanation of allylic alcohols using recyclable fluorous disulfonamide ligand

Cyclopropanation of allylic alcohols with Et₂Zn and CH₂I₂ in the presence of a catalytic amount of fluorous disulfonamide 3 afforded the corresponding cyclopropylmethanols in 69-96% yield with 49-83% ee. The fluorous ligand 3 was readily recovered from the reaction mixture by the fluorous solid-phase extraction (FSPE) and could be reused without a significant loss of the catalytic activity and enantioselectivity.     

Fluorescent aminoarylcyclotetraphosphazenes

In the present work, octachlorocyclotetraphosphazatetraene (1), N₄P₄Cl₈, is reacted with aniline (2), 1-napthylamine (4) and 2-aminoanthracene (6) to give octakis(arylamino)cyclotetraphosphazenes (3, 5 and 7). These cyclotetraphosphazene compounds (3, 5 and 7) have been fully characterized by elemental analysis, mass (MS), FT-IR, ¹H and ³¹P NMR spectroscopies. The molecular and crystal structures of 5 have been characterized by X-ray crystallography. The structure of 5 is monoclinic with the space group P21/c. The octakis(1-napthylamino)-(5) and octakis(2-aminoanthracene)-(7) cyclotetraphosphazene compounds have been synthesised for the first time in this study. The fluorescence properties of 3, 5 and 7 have been investigated in tetrahydrofuran (THF) and have been shown to have highly fluorescence behavior. This work also presents the quenching of arylamino substituted cyclotetraphosphazene derivatives (3, 5 and 7) by p-benzoquinone (BQ) or hydroquinone (HQ).     

Efficient, recoverable, copper-catalyzed aerobic oxidation of alcohols under FBS and thermomorphic mode

A series of fluorinated bipyridine derivatives, (4,4′-bis(R_fCH₂OCH₂)-2,2′-bpy) {R_f = n-C₈F₁₇ (1a), n-C₉F₁₉ (1b), n-C₁₀F₂₁ (1c), n-C₁₁F₂₃ (1d)} have been successfully synthesized using 4,4′-bis(bromomethylene)-2,2′-bpy and fluorinated alkoxides. Bpy 1a-d have been characterized by multi-nuclei (¹H, ¹⁹F, and ¹³C) NMR, GC/MS and FTIR. The Cu complexes 2a-d could be generated in situ by stirring ligands 1a-d with CuBr·Me₂S at room temperature, respectively. The 3-component systems 3c-d, CuBr·Me₂S/Bpy (1c-d)/2,2,6,6-Tetramethylpiperidine 1-oxyl (TEMPO), were successfully used to the aerobic oxidation of alcohols under the fluorous biphasic system (FBS). The resulting products from FBS could be easily recovered by two phase separation with high yields up to 8 runs (>90%). In order to avoid using the expensive fluorous solvents, systems 3a-d, CuBr·Me₂S/Bpy (1a-d)/TEMPO, were also successfully shown to catalyze the aerobic alcohol oxidation under the thermomorphic condition (in C₆H₅Cl), and the yields of oxidation of 4-nitrobenzyl alcohol were close to 100% even after 8 runs. In particular, 3a was most effective under the thermomorphic mode in the chemoselectivity of aerobic oxidation of aliphatic primary alcohols to aldehydes without any overoxidized acids.     

Synthesis, IR-, NMR- and X-ray investigations on some novel N-hetaryl-dihydro-pyrazolyl ferrocenes. Study on ferrocenes, part 16

Cyclocondensation of 1-aryl-3-ferrocenyl-2-propen-1-ones (1) with hetaryl hydrazines resulted in N-hetaryl-3-aryl-5-ferrocenyl pyrazolines (3, 4). The analogous 3-aryl-1-ferrocenyl-2-propen-1-ones (5) gave the isomeric N-hetaryl-5-aryl-3-ferrocenyl-pyrazolines (6, 10), but in lower yield. The reaction of aryl-chalcones (7) with 4-hydrazino-phthalazinone led to 3,5-bis-aryl-N-hetaryl-pyrazolines (8) or to the corresponding ene-hydrazones (9). The structure of the new compounds was established by IR, ¹H and ¹³C NMR spectroscopy, including DNOE, HMQC, HMBC and DEPT methods. For compounds 1b, 3b and 8b the stereo structure was elucidated also by X-ray diffraction.     

Synthesis of polyfunctionalized furans from 3-acetyl-1-aryl-2-pentene-1,4-diones

The BF₃-catalyzed cyclization of 3-acetyl-1-aryl-2-pentene-1,4-diones 1a-e in the presence of water in boiling tetrahydrofuran gave bis(3-acetyl-5-aryl-2-furyl)methanes 2a-e in 26-79% yields along with a small amount of 3-acetyl-5-aryl-2-methylfurans 3a-e. The exact structure of 2a was determined by X-ray crystallography. The use of a half volume of the solvent for the reaction of 1a resulted in the formation of 2,4-bis(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-phenylfuran (4) together with 2a and 3a. A similar reaction of 1a was carried out in the presence of 3-acetyl-5-(4-methylphenyl)-2-methylfuran (3d) to afford 4-(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-(4-methylphenyl)-2-methylfuran (5) in 49% yield. The BF₃-catalyzed reaction of 1a with 2,4-pentanedione in dry tetrahydrofuran at 23°C gave 3-(3-acetyl-5-phenyl-2-furfuryl)-4-hydroxy-3-penten-2-one (6a) and 3-(3-acetyl-2-methyl-4-phenyl-5-furyl)-4-hydroxy-3-penten-2-one (7a) in 66 and 24% yields, respectively. The product distribution depended on the reaction temperature. A similar reaction of 1b-e also yielded the corresponding trisubstituted furans 6b-e and tetrasubstituted furans 7b-e in good yields. These results suggested the presence of the furfuryl carbocation intermediate A during the reaction. The one-pot synthesis of 6a and 7a was also achieved by a similar reaction using phenylglyoxal. The deoxygenation of 1a with triphenylphosphine gave 3a in 88% yield, while 1a was treated with concentrated hydrochloric acid to yield 3-acetyl-2-chloromethyl-5-phenylfuran (8) which was quantitatively transformed in ethanol into 3-acetyl-2-ethoxymethyl-5-phenylfuran (9) and in water into 3-acetyl-5-phenylfurfuryl alcohol (10), respectively. In addition, the Diels-Alder reaction of cyclopantadiene with 1a gave the corresponding [4+2] cycloaddition products 11 and 12.