Near-field optical microscopy using an integrating sphere

A scanning near-field optical microscope using an integrating sphere is demonstrated. The images from a usual near-field optical microscope often include contrasts caused by the sample structure because the reflection and transmission angles of signal waves depend on the size and shape of the sample. The observation angle dependency of signals can be avoided by using an integrating sphere. Background signals resulting from using the sphere can be reduced by using lock-in detection synchronously with modulation of tip–sample distance. The whole detection system is possibly useful for observing the distribution of the refractive index and/or the absorption coefficient. Received: 27 October 2000 / Final version: 29 August 2001 / Published online: 7 November 2001     

A variational approach of nonlinear dissipative pulse propagation

A variational technique to deal with nonlinear dissipative pulse propagation is established. By means of a generalization of the Kantorovitch method, suitable for non-conservative systems, we are able to cope with an extended nonlinear Schr?dinger equation (NLSE) which describes pulse propagation under the influence of nonlinear loss and/or gain, in particular, in the presence of two-photon absorption (TPA). Based on the characteristics of the exact solution of the NLSE in the absence of TPA, we investigate the effects of frequency dispersion of the nonlinear susceptibility associated to the two-photon resonance, obtaining the necessary conditions for a solitary wave solution, even in the presence of a self-steepening term. Received: 4 August 1997 / Received in final form: 25 November 1997 / Accepted: 14 January 1998     

Superfocusing of a spherical wave: Theory and experiment

The possibility of focusing a spherical wave within a region considerably smaller than the wavelength is studied theoretically and experimentally. The coefficient of reflection of a spherical wave from a small rigid or soft sphere is-1. Consequently, the total field near such scatterers remains finite as the radius of the sphere tends to zero. The power of the acoustic field concentrates in this case in a region whose radius is proportional to the acoustic wavelength. The field can be enhanced by choosing an appropriate reflection coefficient. For example, if the reflection coefficient is made equal to 0, the sound pressure will be created by the converging wave alone. As the observation point approaches the center, this field increases without limit as 1/r, where r is the distance from the center. Structures that provide the absorption of the converging wave are analyzed. The experimental setup is described, and the experimental results demonstrating a strong absorption (the reflection coefficient does not exceed 0.2) of the converging wave are presented. The main result of the study is that it experimentally corroborates the possibility of focusing the wave in a region whose dimensions are much smaller than the wavelength.     

非局域颗粒复合介质的相干完美吸收效应

研究了两束相干光以相同的入射角从左、右两侧分别入射到Au-SiO_2复合介质板时,在不同的体系参数下该复合材料体系发生相干完美吸收的情形.运用有效媒质理论推导出了复合介质的有效介电常数以及有效磁导率;在得到有效电磁参数的基础上进一步推导得到平面波入射复合介质板时的反/透射系数.通过比较分析非局域和局域情况下颗粒复合介质的相干完美吸收现象,发现当颗粒尺寸很小时非局域效应的影响会导致复合介质产生相干完美吸收的入射光的频率范围显著变宽.在进一步的解析计算中,通过调节复合介质板的厚度、入射光波长、金属颗粒体积分数等参数得到了不同情况下产生的相干完美吸收现象,并由此分析非局域情形下对于相干完美吸收现象的调控.     

Numerical analysis of the reflection and absorption of electromagnetic wave in nonuniform magnetized plasma slab

In this paper, a model for calculating the reflection and absorption powers of electromagnetic wave (EM wave) in nonuniform magnetized plasma slab is given out based on layer propagation theory. The effects of various plasma parameters and different values of magnetic field intensity on the reflected and absorbed powers are discussed. The results illustrate that the thickness of plasma seldom affects the reflection of radar wave, but it can broaden or reduce the absorption width. Meanwhile, the background magnetic field intensity has an influence upon the results, and it could change the resonance spectrum of magnetized plasma. We also find out that, with appropriate plasma density, collision frequency and magnetic field intensity, more than 90% of radar wave power can be absorbed and the resonant absorption band is about 2 GHz.     

垂直入射电磁波在大气压非平衡等离子体层中的传播特性

用数值模拟的方法对大气压非平衡等离子体薄层中，不同的电子密度分布对微波反射、吸收和透射的影响进行了研究。所采用的理论分析方法是分层模型和镶嵌不变原理。计算中考虑了微波在子层间的多次反射和吸收。数值结果表明，对于电磁波的吸收来说，等离子体中具有二次分布的电子密度，其效果要高于线性分布10%左右；而对于反射来说，线性分布效率更高。功率反射系数随波长的增大而增大，功率吸收系数A也不是单调的，当电子密度不变时，A存在一个峰值，随着电磁波波长的增加而增加，达到最大值后，缓慢降低。     

High-efficiency high-power QCW diode-side-pumped zigzag Nd:YAG ceramic slab laser

A high-efficiency high-power diode-side-pumped quasi-continuous wave (QCW) Nd:YAG ceramic slab laser using zigzag optical path was demonstrated. With an integrating sphere technique, the scattering and absorption coefficient of the ceramic slab were measured to be 0.0024 and 0.0016 cm^?1 at 1,064 nm, respectively. Under a pump power of 6.69 kW, an average output power of 2.44 kW at 1,064 nm with a repetition rate of 400 Hz was achieved, corresponding to an optical-to-optical efficiency of 36.5 %. As far as we know, this is the highest conversion efficiency reported for QCW side-pumped single slab Nd:YAG ceramic laser.     

Interaction of electromagnetic waves with a magnetized nonuniform plasma slab

The absorption, reflection, and transmission of electromagnetic waves by a nonuniform plasma slab immersed in an ambient uniform magnetic field of various strengths are studied in this paper. The effects of the plasma parameters and magnetic field strength on the absorbed, reflected, and transmitted power are discussed. The magnetized nonuniform plasma slab is modeled by a series of magnetized uniform plasma subslabs. The calculation results show that the effects of the magnetic field strength and density gradient on the absorbed power, as well as the frequency band of resonant absorption, are significant. A complete analysis utilizing the scattering matrix method is also used to compare the above calculation results which neglect multiple reflections between subslab interfaces. Broadband absorption of electromagnetic waves can be achieved by changing the magnetic field strength and plasma density. More than 90% of the electromagnetic wave power can be absorbed in a magnetized nonuniform plasma slab with width of 12 cm and the absorption bandwidth can range from 1 to 20 GHz with different plasma parameters and external magnetic field strengths.     

ICRH ���߷�����n||�Կ첨�������Ӽ���Ч����Ӱ��

采用等离子体分层模型,利用WKB近似研究了离子回旋共振加热(ICRH)天线发射谱n||对离子回旋波在托卡马克等离子体的表面功率反射系数、吸收衰减的影响,数值模拟了不同天线发射谱n||条件下快波少数离子加热的效果.模拟结果表明,当其它实验参数一定时,ICRH天线发射合适的n||能提高天线与等离子体的耦合效率,增强少数离子加热的效果.     

THz电磁波在时变非磁化等离子体中的传播特性研究

本文建立了时变非磁化等离子体平板的一维模型,并采用时域有限差分(FDTD)方法对太赫兹(THz)电磁波在时变等离子体中传播时的反射、透射系数及吸收率进行了计算.然后根据计算结果分析了时变等离子体的上升时间、电子密度、温度以及等离子体平板厚度等参数对不同频段THz波在等离子体中传播特性的影响.分析结果表明:THz波在时变等离子体中传播时,其反射系数受等离子体电子密度和上升时间的影响较大;而吸收率则随着上升时间的减小、电子密度及平板厚度的增加而增大;此外,THz电磁波能够穿透量级为1020m-3的高密度等离子体层,可以作为再入段飞行器通信以及高密度等离子体诊断的理想工具.     

Analysis of the reflection of electromagnetic waves in an unsteady moving magnetized plasma slab

The reflection index of an unsteady moving magnetized plasma slab irradiated by an electromagnetic wave is investigated. The direction of the external magnetic field is parallel to the plasma surface and the electromagnetic wave is normally incident on a gas slab and produces the plasma. This gas slab is being ionized by another source and the density of the mentioned unsteady plasma increases with time. The effects of the density growth rate, velocity, thickness of the plasma slab, and the external magnetic field on the reflection index are simulated.     

Broadband second harmonic generation in a tapered isotropic semiconductor slab using total internal reflection quasi phase matching

This paper analytically describes the concept of enhancing the bandwidth of second-harmonic generation in the mid-infrared region in an isotropic tapered semiconductor slab configuration. In this slab geometry, the lengths between successive reflection points due to total internal reflection of the incident laser radiation increase when it propagates through the slab. A computer aided simulation has been carried out to determine the possibility of generating broadband second harmonic intensity for broadband fundamental laser radiations as they are allowed to undergo total internal reflection inside the tapered isotropic semiconductor crystal slab made of either gallium arsenide (GaAs) or zinc selenide (ZnSe). The simulated results indicate wide 3 dB bandwidths of 187 nm and 196 nm in a 30 mm long tapered slab of GaAs and ZnSe respectively. The conversion efficiency, after considering the absorption and reflection losses, is quite satisfactory (≈ 1%). The effects of variations in temperature, incident angle of the fundamental laser radiations at the air-slab interface, length and tapering angle of the semiconductor slab have been studied for generated second harmonic radiations in both GaAs and ZnSe crystals. Optimising these parameters a wider broadband frequency converter with appreciable conversion efficiency can be designed.     

浅海起伏海面下气泡层对声传播的影响

分析了起伏海面下风浪引起的气泡层对海面反射损失和对声传播的影响.一方面,气泡层会改变原来水中的声速剖面;另一方面,气泡层会对声波产生散射和吸收作用.考虑以上两方面的因素,分析了不同风速下气泡层对海面反射损失和声传播损失的影响,仿真发现,在风速大于10 m/s时,对于2 k Hz以上频率时气泡层对小掠射角下海面反射损失的影响不可忽视.在给定的水声环境中,当声源深度和接收深度都为7 m时,风速为16 m/s的风浪下生成的气泡层,在10 km处对3 k Hz的声传播损失的影响达到8.1 d B.当声源深度和接收深度都为18 m时,风速为16 m/s的风浪下生成的气泡层,在10 km处对3 k Hz的声传播损失的影响达到4 d B.     

Calculation of acoustic scattering of a nonrigid surface using physical acoustic method

In this paper the physical acoustic method or the Kirchhoff approxima-tion is extended to treat the scattering of a nonrigid surface in order to estimatethe target strength of targets with absorbing coatings.By using the locally planewave approximation,the relationship between the sound pressure and its normalderivative on the surface can be represented by the plane wave reflectioncoefficient and the acoustic impedance of the surface.The resulting modifiedKirchhoff approximation involves the plane wave reflection coefficient.For aimpedance sphere,a comparison between the physical acoustic method and theexact solution shows that the physical acoustic method still is a good approxima-tion at higher κα values.     

Effect of surface contamination on the heat of adsorption of gases on metals

In the infrared surface electromagnetic waves (SEW) can propagate several centimeters over a metal and some ferroelectrics. Therefore SEW can be used to integrate overlayer surface absorption over very much larger path lengths than in the usual transmission and reflection surface studies. Using a continuum model, we have calculated the surface electromagnetic wave modes for a dielectric slab on a metal against a third (weakly absorbing) medium. Unlike previous treatments, absorption has been included and the absorption expected using the two prism SEW technique has been calculated. For a thick slab (1 mm or more), we show that the absorption coefficient of the slab material can be obtained very simply. For very thin slabs both surface-plasmon-like modes and surface-phonon-like modes (including Fuchs-Kliewer modes) are found. A new parameter Δ₁ + iΔ₂ is introduced to describe the thin film absorption. It has the physical significance of an effective susceptibility for the metal-coating-overlayer system. Further, its experimental significance is that for the normalized transmission of SEW between two prisms, Δ₂ is a dominating parameter which can be measured. For the two prism experiments, numerical examples show 50 percent absorption at peak for a monolayer of CO on Pt and a 4 percent absorption for CuO on copper. Applications to the study of thin films, catalysis, corrosion and other surface problems are anticipated.     

Electromagnetic wave absorption properties of carbonyl iron-ferrite/PMMA composites fabricated by hybridization method

The surface of carbonyl iron powder or a mixture of carbonyl iron and ferrite was coated with polymethylmethacrylate (PMMA) microspheres by a hybridization method to make hybrid powders, and then electromagnetic wave absorption properties of the hybrid composites prepared with these hybrid powders have been investigated. As for the carbonyl iron/PMMA hybrid composite, the reflection loss less than −20 dB could be achieved in a frequency range of 1.7–5.0 GHz when the composite thickness was below 5.00 mm. In the case of the carbonyl iron-ferrite/PMMA hybrid composite, a similar reflection loss was observed in a frequency range of 4.3–13.0 GHz. Thus, the addition of ferrite was found to be useful for achieving a large absorption in a wide frequency range, especially for higher frequency values. Simulated values for the minimum reflection loss are well agreed with actually measured ones, because of homogeneous distribution of carbonyl iron and/or ferrite in these hybrid composites.     

Lateral shifts of an optical beam in an anisotropic metamaterial slab

The lateral shift of a light beam at the surface of an anisotropic metamaterial slab is investigated. Analytical expressions of the lateral shifts are derived using the stationary-phase method, in the case that total reflection does and does not occur at the first interface. The sign of the lateral shift in two situations is discussed, and the necessary conditions for the lateral shift to be positive or negative are given. It is shown that the thickness and physical parameters of the anisotropic metamaterial slab, as well as the incident angle of the light beam, strongly affect the properties of the lateral shift, and numerical results validate these conclusions. The effect of a lossy metamaterial on the lateral shift is also investigated. A restriction on the thickness of the slab is obtained, which is necessary for the stationary-phase method to remain valid.     

The reflection index of an unsteady magnetized plasma slab when the external magnetic field is normal to the plasma surface

In this paper the reflection index of an unsteady magnetized plasma slab irradiated by an electromagnetic wave is investigated. The direction of the external magnetic field is normal to the plasma surface. Here, it is assumed that the electromagnetic wave is normally incident on the gas slab. On the other hand, this gas slab is being ionized by another strong microwave field and the density of the unsteady plasma increases with time. The effects of the density growth rate, the thickness of the plasma slab and the external magnetic field on the reflection index are simulated.     

Surface-emitted terahertz-wave generation by ridged periodically poled lithium niobate and enhancement by mixing of two terahertz waves

Surface-emitted terahertz- (THz-) wave generation by difference-frequency mixing with ridge-shaped periodically poled lithium niobate (PPLN) was demonstrated. The PPLN had a ridge height of 300 microm, a thickness of 20 microm, and an interaction length of 35 mm. The ridge behaves as a slab waveguide for optical pump beams. The PPLN gives rise to THz waves in opposite directions, perpendicular to the pump-beam direction. Reflecting the THz wave on one side and overlapping it with the THz wave on the other side increased the total THz-wave intensity approximately 2.7 times compared with that without reflection and mixing.