Quantitative evaluation of d-pi interaction in copper(I) complexes and control of copper(I)-dioxygen reactivity

Crystal structures of the copper(I) complexes 1(X), 2, and 3 of a series of tridentate ligands L1(X), L2, and L3, respectively (L1(X): p-substituted derivatives of N,N-bis[2-(2-pyridyl)ethyl]-2-phenylethylamine; X=H, Me, OMe, Cl, NO(2); L2: N,N-bis[2-(2-pyridyl)ethyl]-2-methyl-2-phenylethylamine; L3: N,N-bis[2-(2-pyridyl)ethyl]-2,2-diphenylethylamine) were solved to demonstrate that all the copper(I) complexes involve an eta(2) copper-arene interaction with the phenyl ring of the ligand sidearm. The Cu(I) ion in each complex has a distorted tetrahedral geometry consisting of the three nitrogen atoms (one tertiary amine nitrogen atom and two pyridine nitrogen atoms) and C(1)-C(2) of the phenyl ring of ligand sidearm, whereby the Cu-C distances of the copper-arene interaction significantly depend on the para substituents. The existence of the copper-arene interaction in a nonpolar organic solvent (CH(2)Cl(2)) was demonstrated by the observation of an intense MLCT band around 290 nm, and the magnitude of the interaction was evaluated by detailed analysis of the (1)H and (13)C NMR spectra and the redox potentials E(1/2) of the copper ion, as well as by means of the ligand-exchange reaction between the phenyl ring and CH(3)CN as an external ligand. The thermodynamic parameters DeltaH(o) and DeltaS(o) for the ligand-exchange reaction with CH(3)CN afforded a quantitative measure for the energy difference of the copper-arene interaction in the series of copper(I) complexes. Density functional studies indicated that the copper(I)-arene interaction mainly consists of the interaction between the d(z(2) ) orbital of Cu(I) and a pi orbital of the phenyl ring. The copper(I) complexes 1(X) reacted with O(2) at -80 degrees C in CH(2)Cl(2) to give the corresponding (micro-eta(2):eta(2)-peroxo)dicopper(II) complexes 4, the formation rates k(obs) of which were significantly retarded by stronger d-pi interaction, while complexes 2 and 3, which exhibit the strongest d-pi interaction showed significantly lower reactivity toward O(2) under the same experimental conditions. Thus, the d-pi interaction has been demonstrated for the first time to affect the copper(I)-dioxygen reactivity, and represents a new aspect of ligand effects in copper(I)-dioxygen chemistry.     

Modeling the mononuclear, dinuclear, and trinuclear copper(I) reaction centers of copper proteins using pyridylalkylamine ligands connected to 1,3,5-triethylbenzene spacer

The structure and O2-reactivity of copper(I) complexes supported by novel ligands, Pye2 (1,3,5-triethyl-2,4-bis((N-benzyl-N-(2-(pyridin-2-yl)ethyl)-)aminomethyl)benzene), Pye3 (1,3,5-triethyl-2,4,6-tris((N-benzyl-N-(2-(pyridin-2-yl)ethyl))aminomethyl)benzene), MePym2 (1,3,5-triethyl-2,4-bis((N-benzyl-N-(6-methylpyridin-2-ylmethyl))aminomethyl)benzene), and MePym3 (1,3,5-triethyl-2,4,6-tris((N-benzyl-N-(6-methylpyridin-2-ylmethyl))aminomethyl)benzene) have been examined. The ligands are designed to construct mono-, di-, and trinuclear copper(I) complexes by connecting two or three pyridylalkylamine metal-binding sites to a 1,3,5-triethylbenzene spacer. Thus, the reaction of the ligands with [CuI(CH3CN)4]X (X = PF6, CF3SO3) or CuICl gave the expected mononuclear copper(I) complexes [CuI(Pye2)(CF3SO3)] (1) and [CuI(Pye3)](CF3SO3) (2), dinuclear copper(I) complex [CuI2(MePym2)(Cl)]CuICl2 (3), and trinuclear copper(I) complex [CuI3(MePym3)(CH3CN)3](CF3SO3)3 (4), the structures of which were determined by X-ray crystallographic analysis. The mononuclear copper(I) complexes, 1 and 2, exhibit a distorted three-coordinate T-shape structure and a trigonal planar structure, respectively, which are very close to the coordination geometry of the CuA site of PHM (peptidylglycine alpha-hydroxylating monooxygenase) and the CuB site of CcO (cytochrome c oxidase). Notably, 1 and 2 showed a significantly high oxidation potential (990 mV vs SCE), thus showing virtually no reactivity toward O2. On the other hand, the metal centers of the dinuclear and trinuclear copper(I) complexes, 3 and 4, exhibit a distorted trigonal planar geometry and a trigonal pyramidal geometry, respectively. In contrast to the mononuclear copper(I) complexes, these dinuclear and trinuclear copper(I) complexes reacted with O2 to induce an aromatic ligand hydroxylation reaction involving an NIH-shift of one of the ethyl substituents on the benzene spacer. The NIH-shift of the alkyl substituent on the aromatic ring is strong evidence of the electrophilic aromatic substitution mechanism, although the active oxygen intermediate could not be directly detected during the course of the reaction. The biological relevance of the copper(I) complexes is also discussed on the basis of structure and O2-reactivity.     

Carbon-halogen bond activation mechanism by copper(I) complexes of (2-pyridyl)alkylamine ligands

The reaction of p-substituted benzyl halides ((Y)BnX; X = Cl, Br, and I; Y = p-substituent, OMe, t-Bu, Me, H, F, Cl, and NO(2)) and copper(I) complexes supported by a series of (2-pyridyl)alkylamine ligands has been investigated to shed light on the mechanism of copper(I) complex mediated carbon-halogen bond activation, including ligand effects on the redox reactivity of copper(I) complexes which are relevant to the chemistry. For both the tridentate ligand (Phe)L(Pym2) [N,N-bis(2-pyridylmethyl)-2-phenylethylamine] and tetradentate ligand TMPA [tris(2-pyridylmethyl)amine] complexes, the C-C coupling reaction of benzyl halides proceeded smoothly to give corresponding 1,2-diphenylethane derivatives and copper(II)-halide complex products. Kinetic analysis revealed that the reaction obeys second-order kinetics both on the copper complex and the substrate; rate = k[Cu](2)[(Y)BnX](2). A reaction mechanism involving a dinuclear copper(III)-halide organometallic intermediate is proposed, on the basis of the kinetic results, including observed electronic effects of p-substituents (Hammett plot) and the rate dependence on the BDE (bond dissociation energy) of the C-X bond, as well as the ligand effects.     

Tetraphosphinitoresorcinarene complexes: cationic silver(I) and copper(I) halide complexes as mercurate(II) anion receptors

The reactions of mercury(II) halides with the tetraphosphinitoresorcinarene complexes [P4M5X5], where M=Cu or Ag, X=Cl, Br, or I, and P4=(PhCH2CH2CHC6H2)4(O2CR)4(OPPh2)4 with R=C6H11, 4-C6H4Me, C4H3S, OCH2CCH, or OCH2Ph, have been studied. The reactions of the complexes with HgX2 when M=Ag and X=Cl or Br occur with elimination of silver(I) halide and formation of [P4Ag2X(HgX3)], but when M=Ag and X=I, the complexes [P4Ag4I5(HgI)] are formed. When M=Cu and X=I, the products were the remarkable capsule complexes [(P4Cu2I)2(Hg2X6)]. When M=Ag and X=I, the reaction with both CuI and HgI2 gave the complexes [P4Cu2I(Hg2I5)]. Many of these complexes are structurally characterized as containing mercurate anions weakly bonded to cationic tetraphosphinitoresorcinarene complexes of copper(I) or silver(I) in an unusual form of host-guest interaction. In contrast, the complex [P4Ag4I5(HgI)] is considered to be derived from an anionic silver cluster with an iodomercury(II) cation. Fluxionality of the complexes in solution is interpreted in terms of easy, reversible making and breaking of secondary bonds between the copper(I) or silver(I) cations and the mercurate anions.     

Structures and luminescence properties of two copper(I) halide complexes featuring 2-(2-benzimidazolyl)-6-methylpyridine

Two new copper（I） halide complexes bearing 2-（2-benzimidazolyl）-6-methylpyridine（Hbmp） and PPh₃ ligands, Cu（Hbmp）（PPh₃）X（X = Br（1）;I（2））,have been synthesized and characterized.Single-crystal X-ray structure analysis reveals that the halide ligand has a significant impact on the Cu-N_pyridyl bond lengths.Complexes 1 and 2 show the solid-state emissions at ambient temperature,varying with the halide bound to the {Cu（Hbmp）（PPh₃）} motif,which are perhaps best attributed to the metal-to-ligand charge-transfer（Cu（I）→Hbmp） transition mixed with some ligand-to-ligand charge-transfer（X and PPh₃→Hbmp） character.     

Tetraphosphinitoresorcinarene complexes: dynamic clusters with silver(I) and copper(I) halides

Silver(I) and copper(I) halide derivatives of several tetrakis(diphenylphosphinito)resorcinarene ligands are reported. The complexes [resorcinarene(O(2)CR)(4)(OPPh(2))(4)(M(5)X(5))], with resorcinarene = (PhCH(2)CH(2)CHC(6)H(2))(4), R = C(6)H(11), 4-C(6)H(4)Me, C(4)H(3)S, OCH(2)CCH, or OCH(2)Ph, M = Ag, X = Cl, Br, or I, M = Cu, and X = Cl or I, contain a crownlike [P(4)M(5)X(5)] metal halide cluster. These crown clusters were found to be dynamic in solution, as studied by variable-temperature NMR, and easily fragment to give the corresponding complexes containing [P(4)M(4)X(5)](-) and [P(4)M(2)(micro-X)](+) units. Reaction of pentasilver crown clusters with triflic acid gave the corresponding disilver complexes [resorcinarene(O(2)CR)(4)(OPPh(2))(4)]Ag(2)(micro-Cl)]]CF(3)SO(3). Thus, these resorcinarene-based ligands act as a platform for the easy and reversible assembly of copper(I) and silver(I) clusters with novel structures.     

Identification and characterization of monoanionic tripodal tetradentate ligand complexes of copper(I) and copper(II) involved in halogen atom transfer reactions

The copper(I) complex of bis-(2-(2-pyridyl)-ethyl)-(2-(N-p-toluenesulfonamido)-ethyl)amine (PETAEA), a monoanionic, tripodal tetradentate ligand, was prepared, characterized, and shown to be an effective catalyst for atom transfer radical polymerization (ATRP). A model atom transfer reaction of Cu(PETAEA) with 1-phenylethyl bromide and TEMPO radical trapping agent was studied. The copper(II) complex formed in this reaction was identified by comparison of its spectroscopic data with that of Cu(PETAEA)Br prepared by an independent synthesis. Kinetic and spectroscopic data indicated that the reaction mechanism involved simple atom transfer from the alkyl halide to the Cu(PETAEA) to form the Cu(PETAEA)Br, and no other intermediates were involved. The solid-state structures of the copper(I) and (II) complexes appeared to be maintained in solution, so this system is an atom transfer reaction in which all of the reactive species are identified and characterized.     

Complex formation constants for the aqueous copper(I)-acetonitrile system by a simple general method

A simple spectrophotometric method for the evaluation of formation constants for aqueous copper(I) has been developed, based on the kinetics of reduction of Co(III)(NH(3))(5)X complexes. The method has been applied to the aqueous copper(I)-acetonitrile system to determine the successive formation constants beta(1), beta(2), and beta(3) as 4.3 x 10(2) M(-)(1), 1.0 x 10(4) M(-)(2), and 2.0 x 10(4) M(-)(3), respectively, in 0.14 M NaClO(4)/HClO(4) at 21 +/- 1 degrees C.     

Models for copper proteins. Copper(I) and (II) complexes of a novel binucleating tetraamino-tetrathioether ligand

The novel binucleating ligand, 6,6 prime-methylene-bis(5 prime-amino-3 prime,4 prime-benzo-2 prime-thiapentyl)-1,11-diamino-2,3:9,10-dibenzo-4,8-dithiaundecane (H4L) was prepared and reacted with copper(II) salts in dry MeOH to yield mixtures of copper(I) and copper(II) complexes with Cl- and ClO-4 counter ions. The amine functions on the ligand release protons to form copper(I) complexes: (Cu2L)X2, where X=Cl−, ClO4-. The complexes were oxidized to (Cu2L)X4 with H2O2 in DMF; Cu(NO3)2 gave a different complex, [Cu2(H4L)(NO3)2](NO3)2, as regards proton releasing ability, coordination and oxidation number. Evidence for the structures of this new tetraamino-tetrathioether ligand and its copper complexes is provided by 1H-, 13C-n.m.r., mass, u.v.–vis., i.r. spectra, elemental analyses, molar conductivities and magnetic moments. This revised version was published online in June 2006 with corrections to the Cover Date.     

Binuclear copper(I) macrocycles synthesized via the weak-link approach

The weak-link approach has been employed to synthesize a series of bimetallic Cu(I) macrocycles in high yield. Addition of phosphinoalkylether or -thioether ligands to [Cu(MeCN)4]PF6 produces "condensed" intermediates, [mu-(1,4-(PPh2CH2CH2X)2Y)2Cu2][PF6]2 (X = S, O; Y = C6H4, C6F4), containing strong P-Cu bonds and weaker O-Cu or S-Cu bonds. The weak bonds of these intermediates can be cleaved through ligand substitution reactions to generate macrocyclic structures, [mu-(1,4-(PPh2CH2CH2X)2Y)2(Z)nCu2][PF6]2 (X = S, O; Y = C6H4, C6F4; Z = pyridine, acetonitrile, diimines, isocyanide) in nearly quantitative yields. The incorporation of tetrahedral Cu(I) metal centers into these macrocycles provides a pathway to complexes that differ from analogous d8 square planar macrocycles generated via this approach in their increased air stability, small molecule reactivity, and ability to form multiple structural isomers. Solid-state structures, as determined by single-crystal X-ray diffraction studies, are presented for condensed intermediates and an open macrocycle     

Cleavage of X-H bonds (X = N, o, or C) by copper(I) alkyl complexes to form monomeric two-coordinate copper(I) systems

The monomeric copper(I) alkyl complexes (IPr)Cu(R) [R = Me or Et; IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene] react with substrates that possess N-H, O-H, and acidic C-H bonds to form monomeric systems of the type (IPr)Cu(X) (X = anilido, phenoxide, ethoxide, phenylacetylide, or N-pyrrolyl) and methane or ethane. Solid-state X-ray crystal structures of the anilido, ethoxide, and phenoxide complexes confirm that they are monomeric systems. Experimental studies on the reaction of (IPr)Cu(Me) and aniline to produce (IPr)Cu(NHPh) suggest that a likely reaction pathway is coordination of aniline to Cu(I) followed by proton transfer to produce methane and the copper(I) anilido complex.     

General formation of trigonal-prismatic [Ag6X5(dppf)3]+ (X = Cl, Br, I) through an unusual ligand migration from NiX2(dppf) to AgOTf

Use of NiX2(dppf) (X = Cl, Br, I) as a ligand transfer reagent to AgOTf results in the trigonal prismatic [Ag6X5(dppf)3]OTf complexes. Similar reactions with the dppe analogues give at least 4 different types of dppe-bridged coordinationpolymers.     

Structural comparison of copper(I) and copper(II) complexes with tris(2-pyridylmethyl)amine ligand

Copper(I) complexes with the tris(2-pyridylmethyl)amine (TPMA) ligand were synthesized and characterized to examine the effect of counteranions (Br(-), ClO(4)(-), and BPh(4)(-)), as well as auxiliary ligands (CH(3)CN, 4,4'-dipyridyl, and PPh(3)) on the molecular structures in both solid state and solution. Partial dissociation of one of the pyridyl arms in TPMA was not observed when small auxiliary ligands such as CH(3)CN or Br(-) were coordinated to copper(I), but was found to occur with larger ones such as PPh(3) or 4,4'-dipyridyl. All complexes were found to adopt a distorted tetrahedral geometry, with the exception of [Cu(I)(TPMA)][BPh(4)], which was found to be trigonal pyramidal because of stabilization via a long cuprophilic interaction with a bond length of 2.8323(12) ?. Copper(II) complexes with the general formula [Cu(II)(TPMA)X][Y] (X = Cl(-), Br(-) and Y = ClO(4)(-), BPh(4)(-)) were also synthesized to examine the effect of different counterions on the geometry of [Cu(II)(TPMA)X](+) cation, and were found to be isostructural with previously reported [Cu(II)(TPMA)X][X] (X = Cl(-) or Br(-)) complexes.     

Copper(I) coordination polymers [{Cu(mu-X)}2{RP(mu-NtBu)}2]n (R = OC6H4OMe-o; X = Cl, Br, and I) and their reversible conversion into mononuclear complexes [CuX{(RP(mu-NtBu)2}2]: synthesis and structural characterization

The reactions of cyclodiphosphazane cis-[tBuNP(OC6H4OMe-o)]2 (1) with 2 equiv of CuX in acetonitrile afforded one-dimensional Cu(I) coordination polymers [Cu2X2{tBuNP(OC6H4OMe-o)}2]n (2, X = Cl; 3, X = Br; 4, X = I). The crystal structures of 2 and 4 reveal a zigzag arrangement of [P(mu-N)(2)P] and [Cu(mu-X)(2)Cu] units in an alternating manner to form one-dimensional Cu(I) coordination polymers. The reaction between 1 and CuX in a 2:1 ratio afforded mononuclear tricoordinated copper(I) complexes of the type [CuX{(tBuNP(OC6H4OMe-o))2}2] (5, X = Cl; 6, X = Br; 7, X = I). The single-crystal structures were established for the mononuclear copper(I) complexes 5 and 6. When the reactant ratios are 1:1, the formation of a mixture of polymeric and mononuclear products was observed. The Cu(I) polymers (2-4) were converted into the mononuclear complexes (5-7) by reacting with 3 equiv of 1 in dimethyl sulfoxide. Similarly, the mononuclear complexes (5-7) were converted into the corresponding polymeric complexes (2-4) by reacting with 3 equiv of copper(I) halide under mild reaction conditions.     

Reactions of copper(II)-H2O2 adducts supported by tridentate bis(2-pyridylmethyl)amine ligands: sensitivity to solvent and variations in ligand substitution

The copper(II) complexes 1(H) and 1(Ar(X)), supported by the N,N-di(2-pyridylmethyl)benzylamine tridentate ligand (L(H)) or its derivatives having m-substituted phenyl group at the 6-position of pyridine donor groups (L(Ar(X))), have been prepared, and their reactivity toward H2O2 has been examined in detail at low temperature. Both copper(II) complexes exhibited a novel reactivity in acetone, giving 2-hydroxy-2-hydroperoxypropane (HHPP) adducts 2(H) and 2(Ar(X)), respectively. From 2(Ar(X)), an efficient aromatic ligand hydroxylation took place to give phenolate-copper(II) complexes 4(Ar(X)). Detailed spectroscopic and kinetic analyses have revealed that the reaction proceeds via an electrophilic aromatic substitution mechanism involving copper(II)-carbocation intermediates 3(Ar(X)). Theoretical studies at the density functional theory (DFT) level have strongly implicated conjugate acid/base catalysis in the O-O bond cleavage and C-O bond formation steps that take the peroxo intermediate 2(Ar(X)) to the carbocation intermediate 3(Ar(X)). In contrast to the 2(Ar(X)) cases, the HHPP-adduct 2(H) reacted to give a copper(II)-acetate complex [Cu(II)(L(H))(OAc)](ClO4) (6(H)), in which one of the oxygen atoms of the acetate co-ligand originated from H2O2. In this case, a mechanism involving a Baeyer-Villiger type 1,2-methyl shift from the HHPP-adduct and subsequent ester hydrolysis has been proposed on the basis of DFT calculations; conjugate acid/base catalysis is implicated in the 1,2-methyl shift process as well. In propionitrile, both 1(H) and 1(Ar(X)) afforded simple copper(II)-hydroperoxo complexes LCu(II)-OOH in the reaction with H2O2, demonstrating the significant solvent effect on the reaction between copper(II) complexes and H2O2.     

A copper(I) oxygenation precursor in the entatic state: two isomers of a copper(I) compound of a rigid tetradentate ligand

Oxygenation of [CuI(L1)(NC-CH3)]+ (L1 = dimethyl 2,4-bis(2-pyridinyl)-3,7-diazabicyclo-[3.3.1]-nonane-9-on-1,5-dicarboxylate) leads to a relatively stable mu-peroxo-dicopper(II) product. The stability of this type of oxygenation product has been shown before to be the result of the square pyramidal geometry of L1; preorganization by a dinucleating ligand has been shown to increase the stability of the mu-peroxo-dicopper(II) compound. The structural data presented here indicate that destabilization of the copper(I) precursor is another important factor. There are two isomers of [CuI(L1)(NCCH3)]+; one is yellow, and the other is red. X-ray crystallography indicates that one pyridinyl donor is not coordinated in the yellow compound and that the red compound is 5-coordinate. In the light of the X-ray structure of the metal-free ligand and that of the corresponding copper(II) compound, it emerges that the ligand cavity is well suited for copper(II), whereas the copper(I) compounds are highly strained. This is supported by 1H NMR spectra of the copper(I) species where a fast dynamic process leads to line broadening and by electrochemical data, which indicate that the copper(II) products are exceptionally stable. Also presented are structural (copper(II)), electrochemical, and spectroscopic data (1H NMR, copper(I)) of the derivative [Cu(L2)(X)]n+ with a methyl substituent at the alpha-carbon atom of the two coordinated pyridinyl groups (L2 = dimethyl 2,4-bis(2-pyridinyl-6-methyl)-3,7-diazabicyclo-[3.3.1]-nonane-9-on-1,5-dicarboxylate). There are two structural forms of [CuII(L2)(X)]n+ (X = NCCH3, Cl), which depend on the steric demand of the fifth donor X. For both, van der Waals repulsion leads to a destabilization of the copper(II) products, and this is also evident from an increase in the reduction potential (-110 mV vs. -477 mV, Ag/AgNO3).     

Mechanistic studies of copper(I)-catalyzed allylic amination

The reactions of nitrosobenzene and N,N'-diethyl-4-nitrosoaniline with [Cu(CH3CN)4]PF6 provide novel Cu(I) complexes, [Cu(PhNO)3]PF6 (1) and [Cu(Et2NPhNO)3]PF6 (2); in 2 the copper atom is N-coordinated to the nitrosoarenes in a distorted trigonal planar geometry. Complex 1 is strongly implicated as a reactive intermediate in the Cu(I)-catalyzed allylic amination of olefins based on (i) its isolation from the catalytic reaction, (ii) its stoichiometric regioselective allylic amination of alpha-methyl styrene (AMS), (iii) the non-involvement of free PhNO in its amination of AMS, and (iv) its function as a catalyst for the amination of alkenes from phenylhydroxylamine. The reaction between AMS and 1 (80 degrees C, dioxane) is first order in both alkene and 1. Relative rate studies of the reaction of 1 with para substituted AMS derivatives gives a Hammett rho value of -0.035. Alkene adducts isolated from the reaction of 1 with styrene and alpha-methylstyrene are formulated as [(PhNO)3Cu(eta(2)-alkene)]PF6 (7,8) on the basis of spectroscopic characterization and thermolysis. PM3 and DFT MO calculations support the role of [(alkene)Cu(RNO)3]+ and (eta(1)- or eta(3)-allyl)Cu(RNO)2(RNHOH)+ complexes as probable catalytic intermediates and address the origin of the distinctive reaction regioselectivity. A mechanistic scheme is proposed which is consistent with the accumulated experimental and computational results.     

Synthesis of 3-(pyridine-2-yl)-4,5-dihydro-1H-pyrazole-1-thiocarboxamides and their copper(II) complexes

New organic ligands 3-(pyridine-2-yl)-4,5-dihydro-1H-pyrazole-1-thiocarboxamides (L) have been synthesized by a two or three step reaction sequence starting from substituted benzaldehydes and 2-acetyl pyridine. Copper(II) complexes with LCuCl₂ composition were obtained by the reactions of these ligands with CuCl₂·2H₂O. The crystal structure of two synthesized complexes has been determined by X-ray analysis. Copper atoms located in a strongly distorted square piramidal environment and coordinated by pyrazoline and pyridine nitrogen atoms, thiocarbamoyl sulfur atom and two chloride-anions. All complexes undergo reversible or quasi-reversible electrochemical reduction at 0.45–0.28 V with the formation of Cu(I) containing intermediates. The cytotoxicity of copper containing complexes, comparable to cisplatin and doxorubicin, was demonstrated using cancer cell lines MCF-7, A549 and HEK293.     

Cobalt(II), nickel(II), copper(II) and copper(I) complexes of 2-mercapto-5-methyl-1,3,4-thiadiazole and 2,5-bis(methylmercapto)-1,3,4-thiadiazole

Summary Some cobalt(II), nickel(II), copper(II) and copper(I) complexes of 2-mercapto-5-methyl-1,3,4-thiadiazole (mttz) and 2,5-bis(methylmercapto)-1,3,4-thiadiazole (bmttz) have been prepared and studied by conductometric and magnetochemical methods and by electronic and i. r. spectroscopy. The complexes CoX₂ · 2L (L=mttz, X=Cl, Br or I; L=bmttz, X=Br or I), CoCl₂ · bmttz are pseudotetrahedral, and the complexes NiX₂ · mttz (X=Cl or Br), NiCl₂ · 1.3 bmttz, NiBr₂ · 1.5 bmttz are pseudooctahedral. The complex Co₃(OAc)₂ · 4(mttz-H) · 2H₂O has an undefinite constitution. The polynuclear complexes CuCl₂ · 1.3 mttz and CuBr₂ · 1.2 mttz contain presumably pseudotetrahedral chromophores, the chloride having a subnormal magnetic moment. The CuX₂ · 2 bmttz (X=Cl, Br or NO₃) complexes have a six coordination with bridging ligand molecules. In the CuX · 2 mttz (X=Cl, Br or ClO₄) complexes the anions are coordinated, while in the CuClO₄ · 2 bmttz complex the perchlorate anion is ionically bonded.     

Halide and nitrite recognizing hexanuclear metallacycle copper(II) pyrazolates

Halide-centered hexanuclear, anionic copper(II) pyrazolate complexes [trans-Cu(6)((3,5-CF(3))(2)pz)(6)(OH)(6)X](-), X = Cl, Br, I are isolated in a good yield from the redox reaction of the trinuclear copper(I) pyrazolate complex [μ-Cu(3)((3,5-CF(3))(2)pz)(3)] with a halide source such as PPh(3)AuCl or [Bu(4)N]X, X = Cl, Br, or I, in air. X-ray structures of the anion-centered hexanuclear complexes show that the six copper atoms are bridged by bis(3,5-trifluoromethyl)pyrazolate and hydroxyl ligands above and below the six copper atom plane. The anions are located at the center of the cavity and weakly bound to the six copper atoms in a μ(6)-arrangement, Cu-X = ~3.1 ?. A nitrite-centered hexanuclear copper(II) pyrazolate complex [trans-Cu(6)((3,5-CF(3))(2)pz)(6)(OH)(6)(NO(2))](-) was obtained when a solution of [PPN]NO(2) in CH(3)CN was added dropwise to the trinuclear copper(I) pyrazolate complex [μ-Cu(3)((3,5-CF(3))(2)pz)(3)] dissolved in CH(3)CN, in air. Blue crystals are produced by slow evaporation of the acetonitrile solvent. The X-ray structure of [PPN][trans-Cu(6)((3,5-CF(3))(2)pz)(6)(OH)(6)(NO(2))] complex shows the nitrite anion sits in the hexanuclear cavity and is perpendicular to the copper plane with a O-N-O angle of 118.3(7)°. The (19)F and (1)H NMR of the pyrazolate ring atoms are sensitive to the anion present in the ring. Anion exchange of the NO(2)(-) by Cl(-) can be observed easily by (1)H NMR.