Synthesis and properties of group 9 metal complexes bearing a β-ketophosphenato ligand

A novel β-ketophosphenato ligand bearing a bulky substituent, Tbt(2,4,6-tris[bis(trimethylsilyl)methyl]phenyl), on the phosphorus atom was newly designed and synthesized as a heavier congener of a β-ketoiminato ligand. Rhodium and iridium complexes bearing this new β-ketophosphenato ligand have been synthesized and fully characterized by spectroscopic and elemental analyses together with X-ray crystallographic analyses. The results of NMR spectroscopic studies and the X-ray structural analyses suggested that the β-ketophosphenato ligand has unique electronic features due to the low-coordinated phosphorus atom. Comparison of properties between rhodium β-ketophosphenates 2a,b and rhodium β-ketoiminate 7 revealed the character of the β-ketophosphenato ligand, where the trans influence of the phosphorus atom should be stronger than the nitrogen atom of the β-ketoiminato ligand.     

Synthesis and fluorescence properties of novel pyrazine-boron complexes bearing a β-iminoketone ligand

A novel fluorescence dye based on pyrazine-boron complexes bearing a β-iminoketone ligand has been synthesized by using a simple two-step reaction. Synthesized complexes exhibited fluorescence in solution (F(max): 472-604 nm) and in the solid state (F(max): 496-624 nm). These complexes showed a larger Stokes shift (3690-4900 cm(-1)) than well-known boron dipyrromethene dyes (400-600 cm(-1), in most cases).     

Analysis of Fas–ligand interactions using a molecular model of the receptor–ligand interface

A molecular model of the complex between Fas and its ligand was generated to better understand the location and putative effects of site-specific mutations, analyze interactions at the Fas–FasL interface, and identify contact residues. The modeling study was conservative in the sense that regions in Fas and its ligand which could not be predicted with confidence were omitted from the model to ensure accuracy of the analysis. Using the model, it was possible to map four of five N-linked glycosylation sites in Fas and FasL and to study 10 of 11 residues previously identified by mutagenesis as important for binding. Interactions involving six of these residues could be analyzed in detail and their importance for binding was rationalized based on the model. The predicted structure of the Fas–FasL interface was consistent with the experimentally established importance of these residues for binding. In addition, five previously not targeted residues were identified and predicted to contribute to binding via electrostatic interactions. Despite its limitations, the study provided a much improved basis to understand the role of Fas and FasL residues for binding compared to previous residue mapping studies using only a molecular model of Fas.     

Effects of fluorine substituent on properties of cyclometalated iridium(III) complexes with a 2,2′-bipyridine ancillary ligand

Cationic cyclometalated Ir(III) complexes (Ir1-Ir5) with fluorine-substituted 2-phenylpyridine (ppy) derivatives as C^N cyclometalating ligands and 2,2′-bipyridine (bpy) as the ancillary ligand, have been synthesized and fully characterized. The influences of the number and the position of fluorine atoms at the cyclometalating ligands on the photophysical, electrochemical and oxygen sensing properties of the Ir(III) complexes have been investigated systematically. The introduction of fluorine on the C^N cyclometalating ligands of the complexes results in blue-shifts of the maximum emission wavelengths, and increases in the photoluminescence quantum yields (Φ_PL), phosphorescence lifetimes and energy gaps, compared to the non-fluorinated [Ir(ppy)₂(bpy)]⁺PF₆^? (Ir0). Among them, 2-(2,4-difluorophenyl)pyridine-derived Ir4 shows the maximum blue-shift (514 nm vs. 575 nm for Ir0) and the highest Φ_PL (50.8% vs. 6.5% for Ir0). The complex Ir3 with 2-(4-fluorophenyl)-5-fluoropyridine as C^N ligand exhibits the highest oxygen sensitivity and excellent operational stability in 10 cycles within 4000 s.     

Reactivity of a σ,σ,σ,σ-tetraradical: the 2,4,6-tridehydropyridine radical cation

The 2,4,6-tridehydropyridine radical cation, an analogue of the elusive 1,2,3,5-tetradehydrobenzene, was generated in the gas phase and its reactivity examined. Surprisingly, the tetraradical was found not to undergo radical reactions. This behavior is rationalized by resonance structures hindering fast radical reactions. This makes the cation highly electrophilic, and it rapidly reacts with many nucleophiles by quenching the N-C ortho-benzyne moiety, thereby generating a relatively unreactive meta-benzyne analogue.     

Spectral and photochemical properties of hybrid organic—inorganic nanosystems based on CdS quantum dots and a styrylquinoline ligand

The kinetics of photolysis of a styrylquinoline (SQ) derivative as the photochromic ligand in organic—inorganic hybrid nanosystems (HNSs) with the core composed of CdS quantum dots (QDs) has been studied for the first time as a function of the number of ligand molecules in the HNS shell, which varied from 1 to 10. The hybrid nanosystems have been synthesized in the microwave-assisted mode according to the single-step injection-free procedure. It has been shown that high quantum yields of photoisomerization of the SQ ligand are conserved in the HNS. In the early stages of the photolysis, regardless of the number of SQ ligand molecules in the HNS shell, the kinetics obeys the equation for the photolysis of the monomolecular system (model SQ photochrome) with allowance for the absorption due to QDs as an inert shutter. During the course of long-term photolysis, the quantum dots undergo photodegradation to be completely decomposed. According to the principal component analysis data, several photoproducts with different absorption spectra are formed at the intermediate times of the HNS photolysis.     

Hydrostable coordination polymers of a methyl-functionalized 4,4′-bipyridine ligand: structure,stability, magnetic and luminescent properties

The reactions of aromatic dicarboxylic acids and methyl-functionalized 4,4′-bipyridine ligands with metal salts under hydrothermal conditions generated four structurally diverse cobalt(II), zinc(II) and cadmium(II) coordination polymers, [Co(CH₃-BDC)(dmbpy)_0.5] _n (1), [Cd(OH-HBDC)₂(dmbpy)] _n (2), [Zn(NDC)(dmbpy)] _n , (3) and {[Cd(DBA)(dmbpy)_0.5]·2H₂O} _n (4) (CH₃–H₂BDC = 5-methylisophthalic acid, OH–H₂BDC = 5-hydroxyisophthalic acid, H₂NDC = 1,4-naphthalenedicarboxylic acid, H₂DBA = 4,4′-methylenedibenzoic acid, dmbpy = 2,2′-dimethyl-4,4′-bipyridine). All four complexes have been structurally characterized by X-ray crystallography. Complex 1 shows a 3D jsm topology structure with two 1D channels parallel to the a and b axes. Complex 2 has a zigzag chain in which the OH-HBDC ligands point alternately up and down. Complexes 3 and 4 show 2D (4,4) networks when the dinuclear metal centers and their ligands are regarded as nodes and linkers, respectively. Complex 3 also shows twofold interpenetration with 1D channels along the b axis. Two nets of complex 4 interlock in parallel, giving rise to a polycatenated layer (2D → 2D). Thermogravimetric and chemical stabilities, magnetic and luminescent properties of these complexes were investigated.     

Chemistry of nitrosyliron complexes supported by a β-diketiminate ligand

Several nitrosyl complexes of Fe and Co have been prepared using the sterically hindered Ar-nacnac ligand (Ar-nacnac = anion of [(2,6-diisopropylphenyl)NC(Me)](2)CH). The dinitrosyliron complexes [Fe(NO)(2)(Ar-nacnac)] (1) and (Bu(4)N)[Fe(NO)(2)(Ar-nacnac)] (2) react with [Fe(III)(TPP)Cl] (TPP = tetraphenylporphine dianion) to generate [Fe(II)(NO)(TPP)] and the corresponding mononitrosyliron complexes. The factors governing NO transfer with dinitrosyliron complexes (DNICs) 1 and 2 are evaluated, together with the chemistry of the related mononitrosyliron complex, [Fe(NO)Br(Ar-nacnac)] (4). The synthesis and properties of the related cobalt dinitrosyl [Co(NO)(2)(Ar-nacnac)] (3) is also discussed for comparison to DNICs 1 and 2. The solid-state structures of several of these compounds as determined by X-ray crystallography are reported.     

Synthesis,structure, magnetic properties and kinetics of formation of a cluster containing a {Cu3(μ3-OH)} core supported by a triazole-based ligand

The trinuclear copper complex, [Cu₃(μ₃-OH)(CTMB)₃(NO₃)₂(CH₃CN)₂]·5CH₃CN·H₂O (1) {CTMB = cyclohexotriazole-3-(4-methoxybenzamide)}, has been prepared by mixing Cu(NO₃)₂·2.5H₂O and CHMBH {CHMBH = N,N′-cyclohexane-1,2-diylidene-bis(4-methoxybenzoylhydrazide)} in acetonitrile under ambient conditions. Compound 1 was characterized by IR and UV–visible spectroscopies as well as elemental analyses. X-ray crystallography shows that the cluster contains a {Cu₃(μ₃-OH)} core supported by three triazole-based Schiff base ligands. Each Cu is bound to the 2-N of one triazole ring and the 1-N of another. However, the coordination sphere of each Cu is different, one is five-coordinate and the other two are six-coordinate and bridged by a NO₃ group. The six-coordinate sites are different, one has a terminal NO₃ and the other a MeCN ligand. Magnetic measurements revealed the presence of isotropic and antisymmetric exchange between the copper(II) centers. The data were analyzed using the Hamiltonian containing isotropic exchange for an isosceles triangle together with antisymmetric exchange: H = –J₁(S₁S₂ + S₂S₃)?J₂S₁S₃ + G[S₁ × S₂ + S₂ × S₃ + S₃ × S₁]. Compound 1 exhibits strong antiferromagnetic coupling with J₁ = ?180 and J₂ = ?118 cm^?1 and antisymmetric exchange with G_z = 15 cm^?1. Stopped flow spectrophotometric studies show that the formation of 1 occurs in three distinct phases and the kinetics of each phase has been determined.     

Synthesis and structure of a boron cation supported by a β-diketiminate ligand

The salt [HC(CMe)₂(NAr)₂BPh][Al₂Cl₇] (3); Ar = 2,6-i-Pr₂C₆H₃) has been synthesized via the in situ preparation of [HC(CMe)₂(NAr)₂BClPh], followed by treatment with AlCl₃. X-ray analysis of 3 reveals that the BN₂C₃ ring of the boron cation is planar and DFT calculations indicate π-type interactions in the HOMO-6 and HOMO-7 orbitals.     

A novel terbium complex using oxadiazole derivative as a neutral ligand： Synthesis and properties

A novel terbium complex using 1,3,4-oxadiazole derivative as a neutral ligand was synthesized and characterized. Its thermal stability and photoluminescent properties were studied. The strong emission peaked at 546 nm with a full width at half maximum of 5 nm was observed in the pure terbium complex film under excitation of 328 nm light, which is attributed to the characteristic emission of terbium ion. The good thermal stability and intense sharp emission of this terbium complex display its potential application in electroluminescence devices.     

Mechanism of cleaving DNA through hydrolysis of a novel complex of Mg containing dien ligand

A series of elements necessary for life bodies, such as Mg, Cu, Mn, Fe, Co, Zn etc, arechosen as ceflter ions of complexes, because most of them act as active centers ofenZymes and auxiliary factors. We select dien as ligand because nitrogen, especiallymuti-nitrogen coordination is general in natural enzymes and simulated systems,furthermore dien has structural flexibility.The complexes of Mg containing dien and the activity of cleaving DNAA series of metals, such as Mg, Mn, Fe, Co, Ni, …     

Syntheses, structures, and properties of metal complexes involving π-conjugated tetrathiafulvalene-pyridine ligand

Four metal complexes based on the phenyl-bridged pyridine ligand with tetrathiafulvalene unit (TTF-Ph-Py, L), Ni^II(acac)₂(L)₂ (1, acac = acetylacetonate), M(hfac)₂(L)₂ (M = Ni^II, 2; M = Cu^II, 3; hfac = hexafluoroacetylacetonato) and [Co^II(Tp^Ph2)(OAc)(L)]·H₂O (4, Tp^Ph2 = hydridotri(3,5-diphenylpyrazol-1-yl) borate), have been synthesized and structurally characterized. The absorption spectra and redox behaviors of these new compounds have been studied. Optimized conformation and molecular orbital diagram of L has been calculated with density functional theory (DFT).     

Evaluating the kinetic indenyl effect of a π-thiaphentalenyl ancillary ligand

The magnitude of the “kinetic indenyl effect” for the π-thiapentalenyl ligand, isoelectronic heteroanalogue of the indenyl ligand, has been tested using the reaction between complex, Rh(η⁵-th)(CO)₂3 (th = 2-ethyl-5-methyl-cyclopenta[b]thienyl or thiapentalenyl) and PPh₃ as a model process. Only moderate “kinetic indenyl effect” of the thiapentalenyl ligand was observed. The rational for such behavior was also supported by DFT computational correlation of ground and transition states for the reaction of carbonyl group substitution by a phosphine in the corresponding indenyl and thiapentalenyl rhodium complexes.     

Transformation of an η-coordinated phosphaalkyne into a bridging phosphinidene ligand

The tripalladium cluster [Pd₃(μ₃-CO)(μ-dppm)₃](PF₆)₂ (1) reacts with two equivalents of ^tBuCP to give [Pd₃(μ-dppm)₃(η¹-PCBu^t)₂](PF₆)₂ (2). Prolonged storage of acetone solutions of 2 only resulted in the isolation of [Pd₃(μ-dppm)₃(η¹:μ₃-PCH₂Bu^t)(OCMe₂)](PF₆)₂ (3). Compound 3 has been characterized by X-ray crystallography.     

Radical scavenging properties of a flavouring agent–Vanillin

Using pulse radiolysis technique, the one-electron oxidation of vanillin (V-OH) with azide radicals, at pH 6 and 9 resulted in the formation of vanillin phenoxyl radical with k = 6.7 × 10⁷ and 2.5 × 10⁹ dm³ mol^-1 s^-1, respectively. The transient absorption spectra of the vanillin phenoxyl radical (V-O) formed either at pH 6 or 9, showed a _max at 410 nm. At pH 5, the OH radicals seem to form an adduct with vanillin, _max at 430 nm and k(OH + V-OH) = 3.3 × 10⁹ dm³ mol^-1 s^-1, while at pH 9, the OH radical reaction resulted in the formation of vanillin phenoxyl radical with _max at 410 nm and k(OH + V-O-) = 6.6 × 10⁹ dm³ mol^-1 s^-1. The reactivity of NO₂radicals with vanillin is lower by orders of magnitude signifying an incomplete reaction. In general, the rate constants for the reaction of OH, N, NO radicals with vanillin were higher at pH 9 than at the lower pH. Its reactivity with other one-electron oxidants like CCl₃OO, CHCl₂OO and CH radicals and the ability to chemically repair tryptophanyl and guanosyl radicals with k = 1.5 - 4 × 10⁷ dm³ mol^-1 s^-1 indicate its antioxidative behaviour.     

Some properties of a thermostable β-xylosidase fromRhodothermus marinus

The extracellular β-xylosidase (EC 3.2.1.37) excreted by the thermophilic eubacteriumRhodothermus marinus when grown on xylan has been investigated. The enzyme has been partially purified by ultrafiltration and gel filtration, and some of its characteristics are presented.Rhodothermus marinus grew on xylan with μmax= 0.4 h^? and the α-xylosidase activity was 50 nkat/mL after 24 h in a batch fermentation. The α-xylosidase activity had a half-life of more than 1 h at 90°C and of 14 h at 85 °C. At 80°C, 80% of the initial activity remained after 24 h. The initial activity increased with increasing temperature, showing maximal activity at 90°C. The β-xylosidase had a pH-optimum of 6 and was stable in the range between pH 5 and 9. At pH 10 and 11, 82 and 66%, respectively, of the initial activity remained after 24 h when incubated at 65°C. The molecular weight was estimated to be 169,000 dalton by gelfiltration.     

Magnetic properties of hexanuclear lanthanide(III) clusters incorporating a central μ6-carbonate ligand derived from atmospheric CO2 fixation

Three isostructural hexanuclear lanthanide(III) clusters are reported (Ln(III) = Gd, Tb, and Dy). The metallic core of each complex displays an unusual arrangement of ions, which is stabilized by a μ(6)-carbonate ligand. Magnetic studies show that the Ln(III) ions in each compound are weakly exchange coupled, with the Tb and Dy analogues displaying single-molecule-magnet behavior.     

Synthesis and properties of conjugated bimetallic ruthenium complexes with σ,σ-bridging azobenzene chains

A versatile synthetic route to conjugated bimetallic ruthenium complexes with σ,σ-bridging azobenzene chains was developed, and new ruthenium complexes with various ligands were synthesized and characterized. These bimetallic complexes showed a remarkable absorption in the visible region (λ_max: 452-483 nm), and undergo trans-to-cis isomerization under UV light irradiation for short time. Electrochemical study showed that the metal centers in bimetallic complexes containing the CHCHC₆H₄NNC₆H₄CHCH bridge interact with each other.     

Concentration dependences of the physicochemical properties of a water–acetone system

Concentration dependences of the UV spectrum, refractive index, specific electrical conductivity, boiling point, pH, surface tension, and heats of dissolution of a water–acetone system on the amount of acetone in the water are studied. It is found that the reversible protolytic interaction of the components occurs in all such solutions, resulting in the formation of hydroxyl and acetonium ions. It is shown that shifts of the equilibrium between the molecules and ions in the solution leads to extreme changes in their electrical properties. It is concluded that the formation of acetone solutions of water is accompanied by heat absorption, while the formation of aqueous solutions of acetone is accompanied by heat release.