In situ FTIRS studies of kinetics of HCOOH oxidation on Pt(110) electrode modified with antimony adatoms

The electrochemical behavior of irreversibly adsorbed antimony on a Pt(110) electrode (Pt(110)/Sb) with various coverages was studied using cyclic voltammetry. The kinetics of HCOOH oxidation via reactive intermediates on Pt(110)/Sb were investigated quantitatively by employing the potential step technique and in situ FTIR spectroscopy. The results demonstrated that Sb adatoms were stable on Pt(110) when the electrode potential was below 0.45 V (SCE). It has been revealed that the dissociative adsorption of formic acid can be inhibited by the presence of Sb_ad on the Pt(110) surface. The electrocatalytic effects of Sb_ad towards HCOOH oxidation consist in a negative shift of the oxidation potential (about 350 mV) and the enhancement of the oxidation current. Based on the data processing method of integration transform developed in our previous papers, the kinetics of HCOOH oxidation on Pt(110)/Sb electrodes of different θ_Sb have been investigated quantitatively, and both the rate constant k_f and the transfer coefficient β were determined and reported.     

Potential dependence of anodic current transients on the renewed gold surface in thallium-containing thiosulfate solutions

The effect of potential on the anodic current transient times τ_p, which were measured on the gold electrode surface renewed by cutting off a thin surface metal layer immediately in the thallium-containing thiosulfate solutions of compositions (M): 0.05 Na₂S₂O₃, 10^?5 to 10^?4 TlNO₃, and 0.25 K₂SO₄, is studied. It is shown that the logarithm of inverse transient times 1/τ_p linearly depends on the electrode potential. Using the microgravimetrical method, it is found that, in the studied potential range, the amount of chemisorbed thallium ions only slightly depends on the potential, and at E = 0.3 V, it is approximately 0.12 μg/cm². It is evidenced that the transients reaches a plateau, when an equilibrium surface concentration of catalyst is reached. The value 1/τ_p reflects the rate of electrochemical oxidation of preliminarily adsorbed thallium(I) ions with the formation of catalytically active thallium(III) ions, and the first electron transfer is the limiting stage of the process.     

金属离子在多孔硅表面和吸附与电镀过程中金属在多孔硅表面的淀积

刚制备的多孔硅与金属盐溶液接触会产生金属离子在多孔硅表面和吸附现象。实验显示这一现象只发生在新鲜的多孔硅表面, 而存放一月以后的样品不具备此性质。文中把这一现象归因于新鲜的多孔硅表面电子的富集, 溶液中金属离子从多孔硅表面获得电子而附着。多孔硅表面电镀金属过程中, 一定电压下电镀电流密度在起始阶段逐渐下降, 可以用一个指数关系式较好地描述, 在本文中有一个唯象模型予以解释。     

中性载体可咯化合物应用于银离子电位传感器的研究

研制了一种以5,10,15-三(五氟苯基)可咯[H_3(tpfc)]为活性组分物质、以邻硝基苯辛醚o-NPOE为增塑剂、以四苯硼钠为亲脂性大阴离子添加剂的PVC膜电极(4种物质的质量比为3:3:62:32),电极能斯特斜率为54.8 mV/decade、工作浓度范围为5.1×10~(-6)～0.1 mol/L,pH为4.0～8.0,响应时间不超过30 s,该电极对银离子能抵抗来自Hg~(2+)、Pb~(2+)等离子干扰,表现出较高的选择性.这种传感器可用于对实际矿石样品进行检测.     

以锑电极作参比电极测定废水中硫化物

提出了以锑电极作为参比电极与Ag2 S电极组成无液接测量电池测定废水中硫化物的新方法。并研究了电极的性能 ,测定条件及干扰物质的影响。方法的线性范围 1 .0× 1 0 - 2 mol/L～ 5 .0× 1 0 - 7mol/L[S2 - ],回收率为 99%～1 0 3%     

Potential control of horseradish peroxidase immobilization on gold electrode

Based on the self-assembled monolayer (SAM) technique, a number of methods for immobilizing protein onto electrodes have been recently reported, such as entrapment method in which the protein was wrapped with regenerated silk fibroin[1], self-assem- bled monolayer[2] and silica sol-gel[3], layer-by-layer self-assembly method in which the protein was ad-sorbed to opposite charged macromolecules due to electrostatic attraction[4], reversed micelle[5], cross- linked method[6] and surface spin-coa…     

Adsorption of pyridine on a polycrystalline gold electrode surface studied by infrared reflection absorption spectroscopy

The adsorption behavior of pyridine on a smooth polycrystalline gold electrode surface was investigated over a wide wavenumber region (2000–500 cm⁻¹) by in situ infrared reflection absorption spectroscopy (IRAS). The reversible adsorption/desorption of pyridine was observed upon the change in applied electrode potential, and the adsorption state at positive potentials was found to depend strongly on the kind of halide ion used as a supporting electrolyte. Symmetry analysis of absorption bands observed revealed that pyridine molecules adsorb with the molecular axis (C₂ axis) perpendicular to the electrode surface (vertical configuration) at positive potentials in 0.5 M KF, KCl and KBr solutions. A band due to the out-of-plane bending mode of the adsorbed pyridine molecule was observed at potentials more negative than ca. 0 V for 0.5 M KF solution containing 100 mM pyridine. We concluded that even in the 100 mM pyridine solution, adsorbed pyridine forms a monolayer and that the molecules reorient from a flat (parallel) to the vertical configuration as the potential becomes less negative. No bands due to adsorbed pyridine were detected for 0.5 M KI solution. The amount of adsorbed pyridine was found to depend strongly on the strength of specific adsorption of halide ions.     

金与银电极表面甘氨酸分子吸附作用的SERS光谱研究

本文利用表面增强拉曼光谱(SERS)技术研究了甘氨酸在金与银基底表面的吸附作用特征。研究表明甘氨酸分子以COO-的不对称形式吸附于金电极表面,且NH2也是其可能的吸附位点;而在银电极表面,则主要是通过COO-的对称形式而吸附。在此基础上,进一步研究了电极电位与溶液酸碱性对吸附于粗糙化银电极表面甘氨酸分子吸附作用的影响。研究结果表明,甘氨酸分子中去质子化羧基的吸附作用受电位影响较小,而电位对-NH3+吸附作用的影响程度较大。另一方面,溶液pH值对银电极表面的甘氨酸分子吸附行为的影响也较为显著。随着溶液酸性减小羧基倾向于相对于电极表面平行吸附。这是由于随着溶液碱性增大氨基质子化程度的减小,有利于氨基在银电极表面吸附。这将改变分子的吸附构型使其更接近于电极表面。这些变化主要出现在pH值大于10的条件下。     

Adsorption isotherm for a solid electrode: The link between the differential surface tension and capacitance curves

Investigation of thermodynamically equilibrium single-component adsorption from a liquid solution on a solid electrode with allowance made for elastic deformation of its surface is continued. A full electrocapillarity equation is derived from thermodynamics equations for an interphase layer in the absence of irreversible processes. Thermodynamic aspects of the Shuttleworth equation are discussed and the equation is compared with two-dimensional Murnaghan formulas for elastic isotropic media. An adsorption isotherm equation and compatibility equations that had been derived previously are examined in a special case where the derivative of a surface concentration with respect to depends solely on (=()) and a rigorous solution of these is obtained for a deformed electrode ( 0). The effect of and dimensionless electrode potential on the extreme (at an infinitely high adsorbate concentration) value of is studied. The model of two parallel capacitors is considered in detail for a general case. Owing to the use of capacitance curves for an elastically stretched electrode, a formula that expresses the differential surface tension of a nondeformed electrode through such curves is derived for the first time ever.To the memory of my motherTranslated from Elektrokhimiya, Vol. 41, No. 1, 2005, pp. 20–34.Original Russian Text Copyright © 2005 by Podgaetskii.     

Nonlinear Estimation of the Equilibrium Potential for a Solid‐State Lead Ion‐Selective Electrode

Nonlinear regression was applied to three empirical equations to model the response of a solid‐state lead ion‐selective electrode (ISE). One particular equation, previously reported to describe the response of a fluoride ISE, was found to also describe the response of a solid‐state lead ISE. Nonlinear regression was applied to the early portion of the response curve for the lead ISE and used to estimate the equilibrium potential for a range of test solutions.     

以无机化学习题为例探讨电极电势的应用*

电极电势是氧化还原反应中重要的物理量,其概念的理解和运算是教学重点和难点,在无机化学习题的基础上,将电极电势和四大平衡相结合,通过一题多解开拓学生的思维,旨在帮助学生巩固所学知识,加以灵活运用,做到举一反三、触类旁通,提高学习效率及科学思维能力,加深对化学基本原理的理解和掌握。     

基于酞菁铜衍生物为载体的电极对水杨酸根的选择性电位响应

本文以2,9,16,23-四硝基酞菁铜(II) (Cu(II)TNPc) 和2,9,16,23-四氨基酞菁铜(II) (Cu(II)TAPc) 为载体制备PVC聚合膜,构建了水杨酸根选择性电极,并探讨了该电极的选择性响应性能。研究了增塑剂的性质、载体的含量及阴、阳离子添加剂对电极电位响应的影响。结果表明,基于Cu(II)TNPc为载体的PVC膜电极对水杨酸根 (Sal－) 呈现出优先选择性电位响应。具有最佳电位响应的电极的膜组成是：(w/w) 3.0% Cu(II)TNPc,67.0% o-NPOE,29.5% PVC和0.5% NaTPB。基于该组成的电极的线性响应范围为1.0×10－1－9.0×10－7 mol·L－1,检测下限为7.2×10－7 mol·L-1,斜率为－59.8±0.5 mV/decade;其响应快速,稳定性好,适宜的pH范围是3.0－7.0。并成功运用于了实际样品中水杨酸含量的测定,获得令人满意的结果。     

Effect of concentration of ammonia and citrate ions on the kinetics of cathodic reactions during electrodeposition of a nickel-molybdenum alloy

The effect of the concentration of ammonia and citrate ions on the kinetics of cathodic processes in electrolytes intended for depositing electrolytic coatings of a nickel-molybdenum alloy is studied. Conditions conducive to obtaining coatings of satisfactory quality are formulated. The effect of ammonia and citrate ions on the Mo content in the alloy is analyzed. The experimental data are explained by assuming that the intermediate products of reduction of nickel and molybdate ions are adsorbed on the electrode surface.To the Centennial of B.N. Kabanov.Translated from Elektrokhimiya, Vol. 41, No. 1, 2005, pp. 83–90.Original Russian Text Copyright © 2005 by Kuznetsov, Pavlov, Chepeleva, Kudryavtsev.     

Effect of equilibrium potential on anodic peaks of a reversible electrode process in conditions of stripping voltammetry at a linear alteration of potential on a thin-film mercury electrode

The full contour of a stripping-voltammetry peak for a reversible electrode process in conditions of boundedly semi-infinite and symmetrical diffusion on a thin-film mercury electrode at a linearly altering potential is calculated with an exact explicit equation allowing for the equilibrium-potential effect in a broad range of values of parameter H (which are defined by the film thickness, potential scan rate, and diffusion coefficient). The height, position of maximum, and full width at half-maximum of anodic peaks are evaluated as a function of parameter H and equilibrium potential. The latter is shown to exert substantial influence on the parameters and shape of anodic peaks.To the Centennial of B.N. KabanovDeceasedTranslated from Elektrokhimiya, Vol. 41, No. 1, 2005, pp. 69–75.Original Russian Text Copyright © 2005 by Nazarov, Stromberg, Larionova.     

电位调控的“离子印迹”聚苯胺电极柱在阴离子分析中的应用

以氯离子为掺杂阴离子,采用化学氧化法合成了聚苯胺(PAn).将PAn作为导电固定相填充到多孔陶瓷管中以制备PAn电极柱,并以此电极柱作为三电极体系中的工作电极.在电极柱上施加0.6V的负电位使PAn呈还原态,PAn中掺杂的氯离子发生脱掺杂,从而在PAn骨架上留下在三维空间上与氯离子完全匹配的空穴,即形成了“离子印迹”P...     

Anion adsorption in the course of dichromate reduction on a smooth gold electrode in aqueous acid solutions

The specific adsorption of anions (HSO₄ ⁻, Cl⁻) present in low concentration (c < 10⁻³ mol dm⁻³) was studied by radiotracer techniques in the course of the reduction of dichromate (chromate) species in 1 mol dm⁻³ HClO₄ supporting electrolyte. In accordance with the results of preliminary studies reported earlier, enhancement of the anion adsorption was found, induced by some adsorbed intermediates of the reduction process. Potential dependence of the induced adsorption and its correlation with the reduction rate was investigated. The role of adsorption competition between various anions is discussed. It is concluded that study of the induced anion adsorption could be a tool for the investigation of the sorption of intermediates formed in the course of the reduction. Received: 3 May 1999 / Accepted: 10 June 1999     

Specific Features of the Adsorption of Carbon Monoxide on a Smooth Polycrystalline Platinum Electrode Modified with Adsorbed Silver Atoms

The adsorption of carbon monoxide at the surface of smooth polycrystalline platinum (smPt) is studied in conditions of a preliminary accumulation of various quantities of silver (θ_Ag) on the surface. A comparison with similar data obtained previously for Pt/Pt is conducted. It is discovered that on smPt, exactly as in the case of Pt/Pt, carbon monoxide undergoes adsorption at sites that are not occupied by adsorbed silver, without forcing the preliminarily adsorbed silver out. At small and intermediate Ag_ad, as opposed to Pt/Pt, a mere two peaks are observed in a voltametric curve in the region of electrodesorption of the mixed layer on smPt. It is shown that, in the region of potentials of the first peak, there occurs practically no transition of silver into solution in the course of oxidation of the mixed layer. Specific features that characterize the behavior of the CO_ads + Ag_ad mixed layer are discussed under the assumption about an “islet” character of the adsorption of silver.     

Adsorption of ethyl xanthate anions on a silver electrode. An in-situ FTIR study

The adsorption of ethyl xanthatc ion (EX⁻) on a silver electrode in sodium sulphate, phosphate buffer (pH 6.8) and borate buffer (pH 9.2) solutions was studied in situ using Fourier transform IR reflection spectroscopy. The measurements were carried out using a thin-layer flow cell, which allows a continuous supply of the electroactive species into the thin layer. The voltammetric behaviour of the silver electrode in EX⁻-containing solution is characterized by the formation of silver ethyl xanthate (AgEX), which is preceded by a prewave due to chemisorption of ethyl xanthate. An IR band at 1220 cm ⁻¹, assigned to chemisorbed ethyl xanthate, was observed in spectra obtained in the chemisorption region. All IR bands characteristic of AgEX were observed in spectra of a silver electrode surface covered by a few monolayers of AgEX. The in-situ IR measurements also showed that the adsorption of EX⁻ starts directly on the positive side of the potential of zero charge of silver (−0.7 V/SHE).     

The influence of cathodic pretreatment on the kinetics of hydroxide ion oxidation on polycrystalline gold electrode

The electrochemical oxidation of the hydroxide ion was studied on a gold rotating disc electrode (RDE), in aqueous NaOH solutions in the presence of lithium perchlorate as a supporting electrolyte. By potentiodynamic polarization within the limits −1.6 V and +1.6 V vs. SCE, it was demonstrated that the overvoltage of the OH⁻ ion oxidation reaction may be significantly reduced with a 5 min long delay at the vertex cathodic potential of −1.6 V. This finding was explained in terms of the type of gold oxide formed on the gold surface under different experimental conditions.     

Studies of the mixed adsorption layer on a mercury electrode in the systemp-toluidine-polyethyleneglycol-1M NaClO4

Summary The properties of the mixed adsorption layer on a mercury electrode in the system 1M NaClO₄-p-toluidine-polyethyleneglycol (average molecular masses of polyethyleneglycols: 400 or 10000) are discussed. The parameters of theFrumkin and virial isotherms were determined in the range of strong adsorption potentials. In the range of more negative potentials, a mixed adsorption layer was found by investigating the kinetics of the reduction of Zn(II) ion as a pilot ion. Depending on the concentration ratio of the studied organic substances, inhibition, acceleration, or compensation of both with respect to Zn(II) electroreduction was observed. In the presence of polyethyleneglycol, the efficiency of the Zn(II) ion electroreduction increases due to a greater adsorption lability ofp-toluidine molecules on the mercury surface.

---

Untersuchung der gemischten Adsorptionsschicht an einer Quecksilberelektrode im Systemp-Toluidin-Polyethyleneglycol-1M NaClO₄

Zusammenfassung Die Eigenschaften der gemischten Adsorptionsschicht an einer Quecksilberelektrode trode im System 1M NaClO₄-p-Toluidin-Polyethyleneglycol(durchschnittliche Molmassen der Polyethylenglycole: 400 bzw. 1000) werden diskutiert. Die Parameter derFrumkin- und Virialisotherme wurden im Bereich hoher Adsorptionspotentiale bestimmt. Im Bereich negativerer Potentiale wurde durch Untersuchung der Kinetik der Elektroreduktion von Zn(II)-Ionen als Pilotionen eine gemischte Adsorptionsschicht gefunden. In Abhängigkeit von der Konzentration der organischen Verbindungen beobachtet man bezüglich der Elektroreduktion von Zn(II) Hemmung, Beschleunigung oder eine gegenseitige Kompensation beider Effekte. In Gegenwart von Polyethyleneglycol nimmt die Effizienz der Elektroreduktion von Zn(II) aufgrund einer höheren Adsorptionslabilität derp-Toluidin-Moleküle an der Quecksilberoberfläche zu.