Slow motions of a circular cylinder experiencing slip near a plane wall

A theoretical study is presented for the two-dimensional creeping flow caused by a long circular cylindrical particle translating and rotating in a viscous fluid near a large plane wall parallel to its axis. The fluid is allowed to slip at the surface of the particle. The Stokes equations for the fluid velocity field are solved in the quasi-steady limit using cylindrical bipolar coordinates. Semi-analytical solutions for the drag force and torque acting on the particle by the fluid are obtained for various values of the slip coefficient associated with the particle surface and of the relative separation distance between the particle and the wall. The results indicate that the translation and rotation of the confined cylinder are not coupled with each other. For the motion of a no-slip cylinder near a plane wall, our hydrodynamic drag force and torque results reduce to the closed-form solutions available in the literature. The boundary-corrected drag force and torque acting on the particle decrease with an increase in the slip coefficient for an otherwise specified condition. The plane wall exerts the greatest drag on the particle when its migration occurs normal to it, and the least in the case of motion parallel to it. The enhancement in the hydrodynamic drag force and torque on a translating and rotating particle caused by a nearby plane wall is much more significant for a cylinder than for a sphere.     

Cavitation-induced particle–wall interaction in Newtonian and non-Newtonian fluids

A novel hydrodynamic effect, namely, slow contactless motion of a heavy spherical particle along an inclined wall, accompanied by the formation of a finite particle–wall clearance under the action of a cavitation-induced lift force, is investigated. Similarity parameters controlling the particle motion, determined using the dimensionality theory, are validated experimentally. These parameters are related to the atmospheric pressure, the surface tension on the liquid–air interface, the density of the air dissolved in the fluid, the particle weight in the fluid, and the viscoelastic properties of the fluid.This paper was presented at the AERC 2005.     

HYDRODYNAMIC RESISTANCE EFFECT OF FLUID LAYER BETWEEN TWO IMMERSED APPROACHING PARTICLES

1. Introduction The mechanisms of impact and rebound of solid parti- cles in particulate flow systems are of interest over a wide range of application areas such as fluidized beds, pneu- matic transport, filtration processes, erosion and pollution control of suspended particles. In many cases, the colli- sions of particles against themselves and against walls may affect the properties of the mixture. Efforts have been made to describe the fundamental mechanics of particle collisions. The conta…     

Investigation of turbulence and skin friction modification in particle-laden channel flow using lattice Boltzmann method

Interaction between turbulence and particles is investigated in a channel flow. The fluid motion is calculated using direct numerical simulation (DNS) with a lattice Boltzmann (LB) method, and particles are tracked in a Lagrangian framework through the action of force imposed by the fluid. The particle diameter is smaller than the Kolmogorov length scale, and the point force is used to represent the feedback force of particles on the turbulence. The effects of particles on the turbulence and skin friction coefficient are examined with different particle inertias and mass loadings. Inertial particles suppress intensities of the spanwise and wall-normal components of velocity, and the Reynolds shear stress. It is also found that, relative to the reference particle-free flow, the overall mean skin-friction coefficient is reduced by particles. Changes of near wall turbulent structures such as longer and more regular streamwise low-speed streaks and less ejections and sweeps are the manifestation of drag reduction.     

On a Paradox in the Motion of a Rigid Particle along a Wall in a Fluid

The results of an experimental investigation of spherical particles with different surface roughnesses rolling under their own weight down an inclined pipe wall in a Newtonian fluid at low Reynolds numbers, both with (friction should be taken into account) and without contact with the wall, are presented. It is shown that a fixed particle moves differently in different fluids with similar viscosities and densities. This fact, as well as the possibility of particle motion without contact with the wall, cannot be explained within the framework of the usual hydrodynamic theories. An example is the dependence of the particle motion on the static pressure.     

Two-dimensional approach to the motion of a red blood cell in a plane couette flow of plasma

In relation to microrheology of blood, a theoretical approach to the motion of a red blood cell in a plane Couette flow between two parallel plates is made with emphasis on effects of wall. The red blood cell is assumed to be an elliptic cylindrical particle with a thin, inextensible membrane moving like a tank-tread along its perimeter and to contain a Newtonian fluid inside. Fluid motions are analysed numerically both inside and outside the particle on the basis of the Stokes equations, using the finite element method.A quasi-static equilibrium condition leads to the solution for the motion of the particle. It is shown that two types of motion exist (a stationary orientation motion and a flipping motion), depending on the viscosity ratio of inner to outer fluid, the axis ratio of the elliptic cylinder and the ratio of particle size to channel width. The results are applied to capillary blood flow.     

Dynamic simulation of sedimentation of solid particles in an Oldroyd-B fluid

In this paper we present a two-dimensional numerical study of the viscoelastic effects on the sedimentation of particles in the presence of solid walls or another particle. The Navier-Stokes equations coupled with an Oldroyd-B model are solved using a finite-element method with the EVSS formalism, and the particles are moved according to their equations of motion. In a vertical channel filled with a viscoelastic fluid, a particle settling very close to one side wall experiences a repulsion from the wall; a particle farther away from the wall is attracted toward it. Thus a settling particle will approach an eccentric equilibrium position, which depends on the Reynolds and Deborah numbers. Two particles settling one on top of the other attract and form a doublet if their initial separation is not too large. Two particles settling side by side approach each other and the doublet also rotates till the line of centers is aligned with the direction of sedimentation. The particle-particle interactions are in qualitative agreement with experimental observations, while the wall repulsion has not been documented in experiments. The driving force for lateral migrations is shown to correlate with the pressure distribution on the particle's surface. As a rule, viscoelasticity affects the motion of particles by modifying the pressure distribution on their surface. The direct contribution of viscoelastic normal stresses to the force and torque is not important.     

Vibrational hydrodynamic interaction between a sphere and the boundaries of a cavity

A new type of vibrational lift force [1] acting on a spherical body oscillating in a viscous fluid near a rigid boundary is experimentally investigated. The interaction between the body and the cavity boundary creates a repulsion force which is capable of holding a heavy body in the gravity field at a certain distance from the floor and a light body at a certain distance from the ceiling. The repulsion force appears at a distance comparable with the Stokesian boundary layer thickness and increases as the surface is approached. Outside the viscous interaction range, the repulsion force is replaced by an attraction force which decays with distance. Dimensionless parameters governing the vibrational interaction are found and threshold curves, corresponding to the transition of bodies of different densities to the “suspended” state, are plotted as functions of a dimensionless frequency. The dependence of the repulsion and attraction forces on the distance between the body and the wall is studied.     

Vibrational Convection in Nontranslationally Oscillating Cavity (Isothermal Case)

The average motion of an isothermal fluid in a cylindrical square-cross-section cavity performing rotational oscillations about the axis of symmetry is investigated experimentally. The structure of the vibration flow, its stability and laws of transformation are studied as functions of the dimensionless frequency on an interval embracing the regions of extremely low and extremely high frequencies.     

Dynamic coupling between horizontal vessel motion and two-layer shallow-water sloshing

Numerical and analytical results are presented for fluid sloshing, of a two-layer inviscid, incompressible and immiscible fluid with thin layers and a rigid lid, coupled to a vessel which is free to undergo horizontal motion governed by a nonlinear spring. Exact analytical results are obtained for the linear problem, giving the natural frequencies and the resonance structure, particularly between the fluid and vessel. A numerical method for the linear and nonlinear equations is developed based on the high-resolution f-wave-propagation finite volume methods due to Bale et al. (2002) [SIAM Journal on Scientific Computing 24, 955–978], adapted to include the pressure gradient at the rigid-lid, and coupled to a Runge–Kutta solver for the vessel motion. The numerical simulations in the linear limit are compared with the exact analytical solutions. The coupled nonlinear numerical solutions with simulations near the internal 1:1 resonance are presented. Of particular interest is the partition of energy between the vessel and fluid motion.     

Transport and deposition of neutral particles in magnetohydrodynamic turbulent channel flows at low magnetic Reynolds numbers

The effect of Lorentz force on particle transport and deposition is studied by using direct numerical simulation of turbulent channel flow of electrically conducting fluids combined with discrete particle simulation of the trajectories of uncharged, spherical particles. The magnetohydrodynamic equations for fluid flows at low magnetic Reynolds numbers are adopted. The particle motion is determined by the drag, added mass, and pressure gradient forces. Results are obtained for flows with particle ensembles of various densities and diameters in the presence of streamwise, wall-normal or spanwise magnetic fields. It is found that the particle dispersion in the wall-normal and spanwise directions is decreased due to the changes of the underlying fluid turbulence by the Lorentz force, while it is increased in the streamwise direction. The particle accumulation in the near-wall region is diminished in the magnetohydrodynamic flows. In addition, the tendency of small inertia particles to concentrate preferentially in the low-speed streaks near the walls is strengthened with increasing Hartmann number. The particle transport by turbophoretic drift and turbulent diffusion is damped by the magnetic field and, consequently, particle deposition is reduced.     

Hydrodynamic force and torque models for a particle moving near a wall at finite particle Reynolds numbers

This research work is aimed at proposing models for the hydrodynamic force and torque experienced by a spherical particle moving near a solid wall in a viscous fluid at finite particle Reynolds numbers. Conventional lubrication theory was developed based on the theory of Stokes flow around the particle at vanishing particle Reynolds number. In order to account for the effects of finite particle Reynolds number on the models for hydrodynamic force and torque near a wall, we use four types of simple motions at different particle Reynolds numbers. Using the lattice Boltzmann method and considering the moving boundary conditions, we fully resolve the flow field near the particle and obtain the models for hydrodynamic force and torque as functions of particle Reynolds number and the dimensionless gap between the particle and the wall. The resolution is up to 50 grids per particle diameter. After comparing numerical results of the coefficients with conventional results based on Stokes flow, we propose new models for hydrodynamic force and torque at different particle Reynolds numbers. It is shown that the particle Reynolds number has a significant impact on the models for hydrodynamic force and torque. Furthermore, the models are validated against general motions of a particle and available modeling results from literature. The proposed models could be used as sub-grid scale models where the flows between particle and wall can not be fully resolved, or be used in Lagrangian simulations of particle-laden flows when particles are close to a wall instead of the currently used models for an isolated particle.     

Single-Fluid Model of a Mixture for Laminar Flows of Highly Concentrated Suspensions

A model of laminar flow of a highly concentrated suspension is proposed. The model includes the equation of motion for the mixture as a whole and the transport equation for the particle concentration, taking into account a phase slip velocity. The suspension is treated as a Newtonian fluid with an effective viscosity depending on the local particle concentration. The pressure of the solid phase induced by particle-particle interactions and the hydrodynamic drag force with account of the hindering effect are described using empirical formulas. The partial-slip boundary condition for the mixture velocity on the wall models the formation of a slip layer near the wall. The model is validated against experimental data for rotational Couette flow, a plane-channel flow with neutrally buoyant particles, and a fully developed flow with heavy particles in a horizontal pipe. Based on the comparison with the experimental data, it is shown that the model predicts well the dependence of the pressure difference on the mixture velocity and satisfactorily describes the dependence of the delivered particle concentration on the flow velocity.     

Dynamic responses of electrorheological fluid in steady pressure flow

The dynamic responses of the electrorheological fluid in steady pressure flow to stepwise electric fields are investigated experimentally. First of all, the transient responses of the ER fluid under various electric field strengths and flow velocities are obtained from the pressure behaviors in the flow channel with two parallel-plate electrodes. The response times are exponentially decreased with the increase of the flow velocity and the decrease of the electric field strength. Next, the relationship between the dynamic pressure behaviors of the ER fluid and the cluster structure formation processes of the ER particles is investigated using the flow visualization technique. Through the comparison study, it is verified that the dynamic responses of the ER fluid in the flow mode are mainly caused by the cluster densification process in the competition of the electric field-induced particle attraction and the hydrodynamic force, unlike those in the shear mode determined by the particle aggregation process.     

A light cylinder under horizontal vibration in a cavity filled with a fluid

The behavior of a light cylindrical body of circular cross-section under horizontal vibration in a rectangular cavity filled with a fluid is experimentally investigated. At critical vibration intensity the body is repelled from the upper side of the cavity and takes up a stable suspended position, in which the gravity field is balanced by the vibrational repulsive force, executing longitudinal oscillations. As the vibrations are intensified, the gap between the cylinder and the wall widens. A new form of instability, namely, the excitation of the tangential motion of the body along the vibration axis, is found to exist on the supercritical range. The cylinder is at a finite distance from the upper side of the cavity and the tangential motion is due to the loss of symmetry of the oscillating motion. The transition of the cylinder to the suspended state and its return to the wall, as well as the excitation of the average longitudinal motion and its cessation, occur thresholdwise and have a hysteresis. The body dynamics are studied as a function of the dimensionless vibration frequency.     

Dynamic coupling of fluid and structural mechanics for simulating particle motion and interaction in high speed compressible gas particle laden flow

In this work, structural finite element analyses of particles moving and interacting within high speed compressible flow are directly coupled to computational fluid dynamics and heat transfer analyses to provide more detailed and improved simulations of particle laden flow under these operating conditions. For a given solid material model, stresses and displacements throughout the solid body are determined with the particle–particle contact following an element to element local spring force model and local fluid induced forces directly calculated from the finite volume flow solution. Plasticity and particle deformation common in such a flow regime can be incorporated in a more rigorous manner than typical discrete element models where structural conditions are not directly modeled. Using the developed techniques, simulations of normal collisions between two 1 mm radius particles with initial particle velocities of 50–150 m/s are conducted with different levels of pressure driven gas flow moving normal to the initial particle motion for elastic and elastic–plastic with strain hardening based solid material models. In this manner, the relationships between the collision velocity, the material behavior models, and the fluid flow and the particle motion and deformation can be investigated. The elastic–plastic material behavior results in post collision velocities 16–50% of their pre-collision values while the elastic-based particle collisions nearly regained their initial velocity upon rebound. The elastic–plastic material models produce contact forces less than half of those for elastic collisions, longer contact times, and greater particle deformation. Fluid flow forces affect the particle motion even at high collision speeds regardless of the solid material behavior model. With the elastic models, the collision force varied little with the strength of the gas flow driver. For the elastic–plastic models, the larger particle deformation and the resulting increasingly asymmetric loading lead to growing differences in the collision force magnitudes and directions as the gas flow strength increased. The coupled finite volume flow and finite element structural analyses provide a capability to capture the interdependencies between the interaction of the particles, the particle deformation, the fluid flow and the particle motion.     

Dynamics of interaction between a squeezed layer of a viscous incompressible fluid and an elastic three-layer plate

We study the hydrodynamic response of a thin layer of a viscous incompressible fluid squeezed between impermeable walls. We consider the distribution of pressure and force dynamic characteristics of the fluid layer in the case of forced flows along the gap between a vibration generator (which is a rigid plane) exhibiting harmonic vibrations and a stator (which is an elastic freely supported three-layer plate). The inertial forces of the viscous fluid motion and the stator elastic properties are taken into account. The amplitude and phase frequency characteristics of the elastic three-layer plate are found from the solution of the plane problem.     

Direct measurement of fluid force on a particle in liquid by telemetry system

For real-time measurement of the fluid force acting on a particle which moves freely in liquid, we have made a “sensor particle” with a built-in wireless sensor. The sensor particle contains a 3-axis acceleration sensor, 3-axis magnetometer, microcomputer, wireless module and cells. The MEMS acceleration sensor detects the gravitational acceleration in addition to the dynamic acceleration of particle. In order to remove the gravity from acceleration signals, we applied the external magnetic field which is oriented in the same direction as the gravity field. The 3-axis magnetometer detects the direction of external magnetic field and consequently we can remove gravitational acceleration from the sensor signals with arbitrary attitude of particle. A preliminary experiment was performed for checking the accuracy of the measurement system. Firstly we measured the force acting on a settling particle toward a solid wall in liquid. The obtained signals of acceleration (force divided by mass) agrees well with the theoretical prediction of particle motion in liquid for each instant of time. The sensor particle also detects the lubrication force which is exerted on particle for a very short time when it comes close to the wall. Moreover, we applied our system to the gravitational settling of the particle assemblage and detected the fluid force acting on a particle in multi-particle system.     

Low Reynolds number hydrodynamic interaction of a solid particle with a planar wall

The slow viscous flow problem of an arbitrary solid particle in motion near a planar wall is recast into a boundary integral formulation. The present formulation employs the Green function appropriate to the planar wall problem and is developed in sufficient generality to allow calculations for arbitrary particles in any base flow which satisfies Stokes equations and no-slip on the wall. The resulting integral equations are easily discretized and solved for the particle surface tractions. Calculations are performed for axisymmetric motions of a variety of ellips?ids near the planar wall. Agreement with existing theory is excellent.