Corrosion behavior in artificial seawater of thermal-sprayed WC-CoCr coatings on mild steel by electrochemical impedance spectroscopy

The corrosion behavior in artificial seawater of different as-sprayed ceramic-metallic (cermet) coatings applied on low-alloy steel was studied. Five conditions, associated to modifications of the composition of the powder or deposition parameters were evaluated. The degradation mechanisms were studied during extended immersion tests using conventional electrochemical measurement and electrochemical impedance spectroscopy. The extended immersion tests reveal that these as-thermal-sprayed coatings present a cathodic behavior compared with steel. During the first hours of immersion, the electrolyte infiltrates the defects of the coatings, which then result to the local degradation of the substrate accelerated by the galvanic coupling with the cermet coating. Optical observations and Raman analyses reveal the formation of calcium carbonates like aragonite on the cermet surface, very close to the appearance of local anodic sites. The cross-sectioned views reveal the infiltration of the corrosive solution, and the depth penetration of the degradation of steel substrate probably due to the acidification of the anodic sites.     

Unique liquid crystal behavior in water of anionic fluorocarbon-hydrocarbon hybrid surfactants containing oxyethylene units

In this present study, we report on new methodology for determining the Critical Micelle Concentration (CMC) of a neutral surfactant Triton X-100 (TX-100) both in aqueous and non-aqueous media based on a non-invasive approach. The presence of the phenyl moiety of TX-100 was made use of as an intrinsic fluorophore and steady-state and time-resolved spectroscopy has been used to characterize the micellar systems. There are reports that external fluorophores may bring about some structural changes in the systems and the perturbations caused by these fluorophores in micellar systems may affect the shape and size of the micelles. We have also used three probes namely ANS, Rh6G and C-480 to determine the CMC of TX-100 both in aqueous and non-aqueous media and the values obtained agree very well with those estimated by the non-invasive techniques. Interestingly, for our system, we have conclusively proved that the external probes have almost no effect on the process of micellization. Although, both the invasive and non-invasive technologies report almost the same values of CMC, yet the latter methodology is free from any external perturbations and this makes the micellar/reverse micellar system, which may interact with other biological systems less prone to any physical distortions.     

A study on the influence of anionic surfactants on electrochemical degradation of polyaniline

The influence of anionic surfactants on the electrochemical degradation of polyaniline (PANI), deposited by electro-polymerization onto platinum electrodes, was investigated in an aqueous medium by means of cyclic voltammetry. The degradation rate was found to be greatly dependent on the pH of the solution. The electrochemical degradation of PANI/dodecylsulfate and PANI/dodecylbenzenesulfonate films was compared with that of a PANI/hydrochloride film. The degradation rate in the two former cases decreased by some 50% compared to the PANI/hydrochloride film in aqueous solution at pH = 2. The results were confirmed with theoretical calculations performed on the evaluation of head group charge of surfactants, the distance of anions from PANI positive sites and the shielding of anions on PANI positive sites.     

The influence of complexing agents on the effectiveness of electrochemical masking with anionic surfactants in anodic stripping voltammetry

The influence of sodium dodecyl sulphate, sodium dodecyl sulphonate and sodium stearinate on the anodic stripping peaks of Tl(I), Pb(II), Cd(II), Cu(II) and In(III) was investigated. The supporting electrolytes were 0.5M sodium sulphate solution, 0.2M citrate solution (pH 3.7, 4.6 and 7.3), 0.5M tartrate solution (pH 4.4) and 0.1M solution of EDTA (pH 4.4). The composition of complex compounds forming in a solution under experimental conditions was defined. The conditions of ion reduction of metals on hanging mercury electrode during the electrolytical deposition were investigated. The investigation included an analysis of voltammetric curves of the metal ions. The obtained results suggest that "electrochemical masking" is much stronger in electrolytes containing a complexing agent than in the sodium sulphate solution. The influence of the complexing agent may not be explained in terms of the interaction between the form of the complex and the charge of the adsorbed surfactant particles; rather the complexing process is connected with indirect inhibition, i.e., by decreasing the rate of charge transfer reaction.     

Tautomeric equilibria of 5-fluorouracil anionic species in water

It has long been postulated that rare tautomeric or ionized forms of nucleic acid bases may play a role in mispair formation. Therefore, ab initio quantum chemical investigations on the tautomeric equilibrium in 5-fluorouracil (5FU) and its anions (deprotonated from N1, AN1, and from N3, AN3) and their tautomeric forms in water were performed. The effect of the water as solvent was introduced using solute-solvent clusters (four water molecules). The influence of the water molecules on the tautomeric reactions between different forms was considered by multiple proton transfer mechanisms. We show that when a water dimer is located in the reaction site between the two pairs of N-H and C═O groups, the assistive effect of the water molecules is strengthened. All calculations of the solute-water complexes were carried out at an MP2 level of theory and supplemented with correction for higher order correlation terms at CCSD(T) level, using the 6-31+G(d,p) basis set. The ab initio calculated frequencies and Raman intensities of 5FU and its anions AN1, AN3, and dianion are in good agreement with the experimental Raman frequencies in aqueous solution at different pH. In order to establish the pH-induced structural transformation in the molecule of 5FU, further (1)H, (19)F, and (13)C NMR spectra in water solution for pH = 6.9-13.8 were acquired and the chemical shift alterations were determined as a function of pH. On the basis of NMR spectroscopic data obtained for 5FU in aqueous solution at alkaline pH, we suggest the existence of a mixture of the anionic tautomeric forms predicted by our theoretical calculations.     

含双疏水链阴离型两性分子单分子膜的聚集行为

单分子膜在水面上的聚集状态与膜分子的亲水基间的静电排斥作用和疏水基间Van der Waals引力的相对大小有关.在293K亚温度下,2C~nSN~a单分子膜聚集行为的电子显微研究表明,n=12时呈非晶性单分子;n=12时在较高的表面压下形成结晶性单分子膜;n=16时可在表面压为0mN.m^-1的情况下形成结晶性单分子膜.FT-IR和透射电镜对单分子膜聚集结构的解析结果相互一致.本文还讨论了压缩速度对单分子膜π-A等温线的影响.     

The effects of abrasive particles on the electrochemical behavior of adrenaline at different electrodes

Cyclic voltammetry (CV), double-potential step chronocoulometry (DPSCC), and electrochemical impedance spectroscopy (EIS) techniques have been performed to study the effects of abrasive particles on the electrochemical reaction of adrenaline at glassy carbon electrode (GCE) and platinum electrode in 0.5 mol/L H₂SO₄ solution. For the electrochemical reaction of adrenaline, it was shown that abrasive particles have a more marked electrocatalytic effect at GCE compared to that at platinum electrode. The electrocatalytic effect of SiC coated GCE is more obvious comparing to that of Al₂O₃ coated GCE. With the coarse degree of the abrasive paper increasing, the peak current (i _p) increases significantly and the peak-to-peak potential separation (ΔE _p) changes a little at the pretreated GCE. The electron transfer process of adrenaline at the different pretreated GCE is controlled by the diffusion in this system.     

The effect of 2-aminoquinoline-6-carboxylic acid on the corrosion behavior of mild steel in hydrochloric acid

The inhibitive effect of 2-aminoquinoline-6-carboxylic acid (AQC) against mild steel corrosion in 1?M HCl solutions was investigated using conventional weight loss, potentiodynamic polarization, linear polarization and electrochemical impedance spectroscopy methods. The weight loss results showed that AQC is an excellent corrosion inhibitor since its efficiency increased with the concentration to attain 91.8?% at 500?mg?l^?1. Electrochemical polarization measurements revealed that AQC acted as a mixed-type inhibitor and the results of electrochemical impedance spectroscopy have shown that the change in the impedance parameters, charge transfer resistance and double layer capacitance, with the change in concentration of the inhibitor is due to the adsorption of the molecule leading to the formation of a protective layer on the surface of mild steel. The adsorption was assumed to occur on the steel surface through the active centers of the molecule. The inhibition action of AQC was discussed in view of Langmuir adsorption isotherm. Density functional theory calculations of quantum parameters were used to explain efficiency in relation with molecular structure.     

二茂铁不同取代基对其电化学行为的影响

基于二茂铁不同取代基的氧化还原性,利用玻碳电极研究二茂铁及其醇类、醛类、羧酸类的电化学性质。通过循环伏安法探讨了取代基诱导效应和共轭效应对二茂铁电化学性质的影响,并用计时安培法测定了上述8种化合物的扩散系数,探讨了取代基与参数的相关性。     

The electrochemical reduction reaction of dissolved oxygen on Q235 carbon steel in alkaline solution containing chloride ions

Cyclic voltammetry, electrochemical impedance spectroscopy, and rotating disk electrode voltammetry have been used to study the effect of chloride ions on the dissolved oxygen reduction reaction (ORR) on Q235 carbon steel electrode in a 0.02 M calcium hydroxide (Ca(OH)₂) solutions imitating the liquid phase in concrete pores. The results indicate that the cathodic process on Q235 carbon steel electrode in oxygen-saturated 0.02 M Ca(OH)₂ with different concentrations of chloride ions contain three reactions except hydrogen evolution: dissolved oxygen reduction, the reduction of Fe(III) to Fe(II), and then the reduction of Fe(II) to Fe. The peak potential of ORR shifts to the positive direction as the chloride ion concentration increases. The oxygen molecule adsorption can be inhibited by the chloride ion adsorption, and the rate of ORR decreases as the concentration of chloride ions increases. The mechanism of ORR is changed from 2e⁻ and 4e⁻ reactions, occurring simultaneously, to quietly 4e⁻ reaction with the increasing chloride ion concentration.     

The influence of different factors on the stability and ultrafiltration of emulsified oil in water

The effects of different operating conditions on ultrafiltration (regenerated cellulose with a cut-off of 100 kg/mol) of cutting oil were studied for two different cases. The factors, examined at three levels, included: pH, oil concentration, feed flow velocity, and temperature. The salt (NaCl and CaCl₂) concentration was examined at three levels as well. A lower concentration range was used initially and was increased in the second case.     

The influence of Cu on the electrochemical behaviour of 304 stainless steel in 0.1M H3PO4 solution

The effect of different Cu addition on the electrochemical and passivation behaviour of the 304 series stainless steel in 0.1 M phosphoric acid solution was evaluated by the potentiodynamic measurements and electrochemical impedance spectrum (EIS). The effect of Cu on chemical composition of the passive film formed in the solution was also studied by X‐ray photoelectron spectroscopy (XPS). The results indicated that Cu did not appreciably improve the corrosion resistance of the passive film, but enhanced the passivation, lowered the critical and passive current density. The passive and critical current density decreased with Cu content increased. The presence of Cu in the passive film affects passive film stability. Cu can modify the proportion of Cr element in the passive film, and also change the components of Fe in the passive film. Copyright © 2012 John Wiley & Sons, Ltd.     

Ligand influence on the electrochemical behavior of some copper(II) thiosemicarbazone complexes

The redox properties of the title mono- and binuclear copper(II) chelates have been investigated by cyclic voltammetry in DMF at a working platinum electrode. The cathodic reduction and anodic oxidation of the investigated chelates produced the corresponding electrochemical Cu^I and Cu^IIIspecies stable only in the voltammetric time scale, The effects of substituents on E_1/2, redox properties and stability towards oxidation of the complexes were related to the electron-withdrawing or releasing ability of the substituents on the C=N¹[H, CH₃ or C₆H₅] and/or N⁴H [H, C₂H₅, C₆H₅ or pClC₆H₄] groups, The electron attracting substituents stabilize the Cu(II) complexes while electron-donating groups favor oxidation to Cu(III). Changes in the E_1/2 for the complexes due to remote substituent effects could be related to changes in basicity of N⁴H.Thus, variation in N⁴1-J has more influence on E_1/2 than changes in C=N¹. The correlation between E_1/2 of the complexes and pK_a of the ligands has been attributed to the spherical potential generated by the electron density of the donor atoms at the antibonding d orbitals.     

The influence of acetonitrile on complex formation of crown ethers containing different donor atoms

The complexation reactions of crown ethers with monovalent cations and Ba²⁺ were studied in acetonitrile solutions by means of calorimetric and potentiometric titration. The reaction enthalpies measured clearly demonstrate the influence of the interactions between 18-crown-6 and the acetonitrile solvent molecules. Changing the donor atoms or other substituents on the ligand molecule can exert a strong influence on the interactions with the solvent. Thus, all the reaction enthalpies measured for the reaction of 15-crown-5 with different cations are higher compared with 18-crown-6. On comparison with results in methanol, an approximate estimation is made of the influence of solvent molecules on the reaction enthalpies measured in acetonitrile. Due to the strong interaction between silver ion and acetonitrile, complex formation is only observed with crown ethers containing additional nitrogen or sulphur donor atoms.     

Studies on corrosion of mild steel by water using Mössbauer spectroscopy

The corrosion of mild steel as a result of interaction with various types of local natural water samples and distilled water is studied with the help of Mössbauer spectroscopy. The data are supplemented with the studies on IR and magnetic properties as and when required. Distilled water and potable water behave in almost similar fashion wherein ferrihydrite and FeOOH are observed to be the precursors of magnetite, the end corrosion product. In case of brakish water, the additional species, viz., FeCl₂, FeOOH and an intermediate possibly FeOCl are accounted, and possible mechanisms are suggested.     

Adsorption behavior of cationic and anionic species on chitosan resins possessing amino acid moieties.

Chitosan resins modified with amino acids, such as glycine, valine, leucine, and serine, were synthesized for investigating the adsorption behavior of cationic and anionic species, and showed good abilities for the adsorption of trace elements in aquatic media as follows: glycine for lanthanoids at pH 7, leucine for molybdenum at pH 1-5, serine for uranium at pH 2-7, and amino acids for bismuth at pH 1-7. Cationic and anionic species could be adsorbed by a chelating mechanism and an anion-exchange mechanism.     

Study of the influence of different forest species on the microbial activity in soils

Microcalorimetry was used to study the seasonal evolution over one year of the microbial activity in a humic-eutrophic Cambisol soil as a function of its forest cover. The study was carried out on three soils with identical origin but covered with different forest species: pine, eucalyptus, and a typical Atlantic-humid riverside forest. Some other physical, chemical and biological properties and environmental parameters, mainly humidity and environmental temperature, were considered to analyze their influence on soil microbial activity. The study was performed using a microcalorimeter Thermal Analysis Monitor 2277 in which the experiments were carried out with 1 g soil samples treated with 1.25 mg glucose g^–1 soil. From the measured results it follows that pine forest soil is the least productive of the three, as it generates an average heat of 2.7 vs. 5.9 J g^–1 generated by the eucalyptus forest soil and 3.1 J g^–1 generated by the riverside forest soil. These results are dependent on the remaining physical, chemical and biological features analysed and because of this, pine forest soil, with a pH value 3.3 in spring, shows a small capacity to maintain a stable microbial population which is the lowest of the three (0.079·10⁸ to 0.46·10⁸ microorganisms g^–1 soil) while riverside soil microbial population is in the range from 7.9·10⁸ to 17·10⁸ microorganisms g^–1 soil.     

Adsorption behavior and corrosion inhibitive potential of xanthene on mild steel/sulphuric acid interface

The inhibition of xanthene (XEN) on the corrosion of mild steel in 0.5 M H₂SO₄ was studied by gravimetric and UV–visible spectrophotometric methods at 303–333 K. Results obtained show that XEN act as inhibitor for mild steel in H₂SO₄ solution. The inhibition efficiency was found to increase with increase in XEN concentration but decreased with temperature. Activation parameters and Gibbs free energy for the adsorption process using Statistical Physics were calculated and discussed. The corrosion process in 0.5 M H₂SO₄ in the absence and presence of XEN follows zero-order kinetics. The UV–visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a XEN–Fe complex. Quantum chemical calculations using DFT were used to calculate some electronic properties of the molecule in order to ascertain any correlation between the inhibitive effect and molecular structure of xanthene.