Isosteric heat of adsorption in liquid–solid equilibria: Theoretical determination and measurement by liquid chromatography/mass spectrometry

The isosteric heat of adsorption of a pure compound dissolved in a solution in equilibrium with a solid adsorbent was determined, based on the Gibbs surface excess model. The exact isosteric heat of adsorption differs from the usual value derived from the variation of the Henry’s constant with the reciprocal temperature because this procedure assumes ideal behavior of the bulk liquid solution, which, in most cases, is only approximately so. An experimental protocol, based on the determination of the excess adsorption isotherms by combining frontal analysis (for strongly adsorbed components) and spectrometric tracer pulse chromatography (for weakly adsorbed compounds) is proposed. It allows the determination of the exact isosteric heat of adsorption provided that the activity coefficient of the compound in the bulk solution can be explicitly expressed as a function of the bulk liquid composition.     

Characterization of impurities in tobramycin by liquid chromatography–mass spectrometry

The characterization of unknown impurities present in tobramycin by liquid chromatography (LC) coupled with mass spectrometry (MS) is described. A reversed-phase (RP)-LC method using a volatile mobile phase containing a perfluorinated ion-pair reagent was developed and coupled with an ion trap mass spectrometer. The structures of the unknown impurities were deduced by comparison of their fragmentation patterns with those of the available reference substances obtained by LC–MSⁿ experiments.     

Molecular simulation of protein adsorption and conformation at gas-liquid,liquid–liquid and solid–liquid interfaces

The adsorption of proteins at surfaces and interfaces is important in a wide range of industries. Understanding and controlling the conformation of adsorbed proteins at surfaces is critical to stability and function in many technological applications including foods and biomedical testing kits or sensors. Studying adsorbed protein conformation is difficult experimentally and so over the past few decades researchers have turned to computer simulation methods to give information at the atomic level on this important area. In this review we summarize some of the significant simulation work over the past four years at both fluid (liquid–liquid and gas–liquid interfaces) and solid–liquid interfaces. Of particular significance is the work on surfactant proteins such as fungal hydrophobins, ranspumin-2 from the túngara frog and the bacteria protein BslA. These have evolved unique structures impart very high surface-active properties to the molecules. A highlight is the elucidation of the clam-shell unhinging mechanism of ranspumin-2 adsorption to the gas–liquid interface that is responsible for its adsorption to and stabilization of the air bubbles in túngara frog foam nests.     

Simultaneous determination of sulfonamides and metabolites in manure samples by one-step ultrasound/microwave-assisted solid–liquid–solid dispersive extraction and liquid chromatography–mass spectrometry

An in-line matrix cleanup method was used for the simultaneous extraction of 15 sulfonamides and two metabolites from manure samples. The ultrasound/microwave-assisted extraction (UMAE) combined with solid–liquid–solid dispersive extraction (SLSDE) procedure provides a simple sample preparation approach for the processing of manure samples, in which the extraction and cleanup are integrated into one step. Ultrasonic irradiation power, extraction temperature, extraction time, and extraction solvent, which could influence the UMAE efficiency, were investigated. C₁₈ was used as the adsorbent to reduce the effects of interfering components during the extraction procedure. The extracts were concentrated, and the analytes were analyzed by liquid chromatography–tandem mass spectrometry (LC–MS/MS) without any further cleanup. The isotopically labeled compounds sulfamethoxazole-d ₄, sulfamethazine-d ₄, sulfamonomethoxine-d ₄, and sulfadimethoxine-d ₆ were selected as internal standards to minimize the matrix effect in this method. The recoveries of the antibiotics tested ranged from 71 to 118 % at the three spiking levels examined (20, 200, and 500 μg?·?kg^-1). The limits of detections were 1.2–3.6 μg?·?kg^-1 and the limits of quantification were 4.0–12.3 μg?·?kg^-1 for the sulfonamides and their metabolites. The applicability of the method was demonstrated by analyzing 30 commercial manure samples. The results indicated that UMAE–SLSDE combined with LC–MS/MS is a simple, rapid, and environmentally friendly method for the analysis of sulfonamides and their metabolites in manure, and it could provide the basis for a risk assessment of the antibiotics in agricultural environments.     

Determination of triazines in honey by dispersive liquid–liquid microextraction high-performance liquid chromatography

Dispersive liquid–liquid microextraction (DLLME) high-performance liquid chromatography (HPLC) was developed for extraction and determination of triazines from honey. A room temperature ionic liquid, 1-hexyl-3-methylimidazolium hexafluorophosphate [C₆MIM][PF_6.], was used as extraction solvent and Triton X 114 was used as dispersant. A mixture of 175 μL [C₆MIM][PF₆] and 50 μL 10% Triton X 114 was rapidly injected into the 20 mL honey sample by syringe. After extraction, phase separation was performed by centrifugation and the sedimented phase was analyzed by HPLC. Some experimental parameters, such as type and volume of extraction solvent, concentration of dispersant, pH value of sample solution, salt concentration and extraction time were investigated and optimized. The detection limits for chlortoluron, prometon, propazine, linuron and prebane are 6.92, 5.84, 8.55, 8.59 and 5.31 μg kg⁻¹, respectively. The main advantages of the proposed method are simplicity of operation, low cost, high enrichment factor and extraction solvent volume at microliter level. Honey samples were analyzed by the proposed method and obtained results indicated that the proposed method provides acceptable recoveries and precisions.     

Characterization of metabolites of sibutramine in primary cultures of rat hepatocytes by liquid chromatography–ion trap mass spectrometry

Liquid chromatography–ion trap mass spectrometry was used for the detection and structural characterization of metabolites of the anti-obesity drug sibutramine. Metabolites were profiled from incubations of sibutramine in primary cultures of rat hepatocytes. In addition, enantioselectivity of sibutramine metabolism was investigated by carrying out separate incubations with (R)- and (S)-sibutramine. As a result, biotransformation profile for sibutramine with rat hepatocytes is proposed. Nineteen metabolites and several of their isomers formed via demethylation, hydroxylation, dehydrogenation, acetylation, attachment of CO₂, and glucuronidation were identified in MS² and MS³ experiments, though the exact position of the functionality, mostly hydroxylation, could not always be determined from the mass spectrometric information. However, clear enantioselective formation was observed for two hydroxyl derivatives and two glucuronide conjugates, indicating that the hydroxyl/glucuronic acid moiety in those structures is close to the chiral center. Most of the metabolites found in this study are new metabolites of sibutramine, which were not previously reported.     

Support-free pulsed liquid–liquid chromatography

A simple technique of support-free liquid–liquid chromatography is suggested that operates without incorporation of a centrifuge. The pulsed chromatography apparatus consists of a stationary coiled tube and a pulsation device to produce reciprocating motion of liquid phases within each individual coil segment. This reciprocating motion generates a centrifugal force field varying in intensity and direction that leads to an improved mixing of the two liquid phases and retains the stationary phase in the coiled tubing. The intensity of the back and forth motion of liquid phases within each coil unit can be varied by varying the frequency and/or the amplitude of the pulsations generated by the pulsation device. As the magnitude of the stationary phase retention is of paramount importance for success of the technique, the retention of the stationary phase in the pulsed coil column was experimentally studied. A few experiments were conducted to test the chromatographic behavior of valeric (n-pentanoic) and caproic (n-hexanoic) acids. The results obtained demonstrate the potential of the new separation method for preparative purposes.     

Characterization and quantification of chemical constituents in Fuzhuan brick tea using ultra-high-performance liquid chromatography–mass spectrometry

Fuzhuan brick tea, a distinctive dark tea fermented by microorganisms, is a traditional beverage in China throughout history. Recently, it has attracted considerable attention owing to its unique quality characteristics and potential health benefits. The aim of this study was to establish a method for the quality control of Fuzhuan brick tea for stable production. Ultra-high-performance liquid chromatography coupled with quadrupole time-of-flight tandem mass spectrometry was used to identify Fuzhuan brick tea, and the major components were chosen for further quantitative analysis. Subsequently, a quantification method was developed using ultra-high-performance liquid chromatography coupled with triple-quadrupole mass spectrometry, and its reliability was verified through methodological validation. Finally, a total of 30 compounds were identified, including catechins, flavonoids, alkaloids, and fatty acids. The established method was reliable for methodological validation and was applied to the quantitative analysis of Fuzhuan brick tea. This study provides a fundamental basis for the quality control and further studies on the component analysis of Fuzhuan brick tea.     

Exploiting adsorption and desorption at solid–liquid interface for the fluorometric monitoring of glibenclamide in adulterated drinks

Nowadays, the use of a drug to modify a person's behavior with criminal intentions has become a growing public concern. In fact, stealthy drink spiking with certain drugs can cause the incapacitation of a potential victim of assault and in extreme cases can even lead to death. Belonging to the group of drugs used to commit drug-facilitated crimes is glibenclamide, which not only exhibits high sedation secondary effects but when subject to an overdose intake can lead to intense hypoglycemic episodes that could end with death. Suicide attempts and homicides through overdose with glibenclamide have already been reported.     

Determination of non-steroidal anti-inflammatory drugs in urine by the combination of stir membrane liquid–liquid–liquid microextraction and liquid chromatography

A stir membrane liquid phase microextraction procedure working under the three-phase mode is proposed for the first time for the determination of six anti-inflammatory drugs in human urine. The target compounds are isolated and preconcentrated using a special device that integrates the extractant and the stirring element. An alkaline aqueous solution is used as extractant phase while 1-octanol is selected as supported liquid membrane solvent. After the extraction, all the analytes are determined by liquid chromatography (LC) with ultraviolet detection (UV). The analytical method is optimized considering the main involved variables (e.g., pH of donor and acceptor phases, extraction time, stirring rate) and the results indicate that the determination of anti-inflammatory drugs at therapeutic and toxic levels is completely feasible. The limits of detection are in the range from 12.6 (indomethacin) to 30.7 μg/L (naproxen). The repeatability of the method, expressed as relative standard deviation (RSD, n = 5) varies between 3.4% (flurbiprofen) and 5.7% (ketoprofen), while the enrichment factors are in the range from 35.0 (naproxen) to 72.5 (indomethacin).     

Determination of endocrine-disrupting chemicals in the liquid and solid phases of activated sludge by solid phase extraction and gas chromatography–mass spectrometry

The highly complex matrix of activated sludge in sewage treatment plants (STPs) makes it difficult to detect endocrine-disrupting chemicals (EDCs) which are usually present at low concentration levels. To date, no literature has reported the concentrations of steroid estrogens in activated sludge in China and very limited data are available worldwide. In this work, a highly selective and sensitive analytical method was developed for simultaneous determination of two classes of EDCs, including estrone (E1), 17β-estradiol (E2), estriol (E3), 17α-ethynylestradiol (EE2), 4-nonylphenol (NP) and bisphenol A (BPA), in the liquid and solid phases of activated sludge. The procedures for sample preparation, extracts derivatization, and gas chromatography–mass spectrometry (GC–MS) quantification were all optimized to effectively determine target EDCs while minimizing matrix interference. The developed method showed good calibration linearity, recovery, precision, and a low limit of quantification (LOQ) for all selected EDCs in both liquid and solid phases of activated sludge. It was successfully applied to determine the concentrations of EDCs in activated sludge samples from two STPs located in Beijing and Shanghai of China, respectively.     

Advances in analytical toxicology: the current role of liquid chromatography–mass spectrometry in drug quantification in blood and oral fluid

This paper reviews procedures for quantification of drugs in the biosamples blood, plasma, serum, or oral fluid (saliva, etc.) using liquid chromatography coupled with single-stage or tandem mass spectrometry (LC–MS, LC–MS–MS). Such procedures are important prerequisites for competent toxicological judgment and consultation in clinical and forensic toxicology. They cover blood (plasma, serum) analysis of amphetamines and related designer drugs, anesthetics, anticonvulsants, benzodiazepines, opioids, serotonergic drugs, tricyclic antidepressants, neuroleptics, antihistamines, beta-blockers, muscle relaxants, and sulfonylurea-type antidiabetics, and oral fluid analysis of amphetamines and related designer drugs, cocaine, benzoylecgonine, codeine, morphine, enantiomers of methadone and its main metabolite 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP), the nicotine metabolites cotinine and hydroxycotinine, and finally risperidone and its metabolite 9-hydroxyrisperidone. Basic information on the procedures is given in two tables and an example of quantification is illustrated in two figures. The pros and cons of such LC–MS procedures including sample work-up and ion suppression effects are critically discussed.     

Simultaneous determination of several phytohormones in natural coconut juice by hollow fiber-based liquid–liquid–liquid microextraction-high performance liquid chromatography

A simple, selective, sensitive and inexpensive method of hollow fiber-based liquid–liquid–liquid microextraction (HF-LLLME) combined with high performance liquid chromatography (HPLC)-ultraviolet (UV) detection was developed for the determination of four acidic phytohormones (salicylic acid (SA), indole-3-acetic acid (IAA), (±) abscisic acid (ABA) and (±) jasmonic acid (JA)) in natural coconut juice. To the best of our knowledge, this is the first report on the use of liquid phase microextraction (LPME) as a sample pretreatment technique for the simultaneous analysis of several phytohormones. Using phenetole to fill the pores of hollow fiber as the organic phase, 0.1 mol L⁻¹ NaOH solution in the lumen of hollow fiber as the acceptor phase and 1 mol L⁻¹ HCl as the donor phase, a simultaneous preconcentration of four target phytohormones was realized. The acceptor phase was finally withdrawn into the microsyringe and directly injected into HPLC for the separation and quantification of the target phytohormones. The factors affecting the extraction efficiency of four phytohormones by HF-LLLME were optimized with orthogonal design experiment, and the data was analyzed by Statistical Product and Service Solutions (SPSS) software. Under the optimized conditions, the enrichment factors for SA, IAA, ABA and JA were 243, 215, 52 and 48, with the detection limits (S/N = 3) of 4.6, 1.3, 0.9 ng mL⁻¹ and 8.8 μg mL⁻¹, respectively. The relative standard deviations (RSDs, n = 7) were 7.9, 4.9, 6.8% at 50 ng mL⁻¹ level for SA, IAA, ABA and 8.4% at 500 μg mL⁻¹ for JA, respectively. To evaluate the accuracy of the method, the developed method was applied for the simultaneous analysis of several phytohormones in five natural coconut juice samples, and the recoveries for the spiked samples were in the range of 88.3–119.1%.     

Dispersive liquid–liquid–liquid microextraction combined with liquid chromatography for the determination of chlorophenoxy acid herbicides in aqueous samples

A novel sample preparation method “Dispersive liquid–liquid–liquid microextraction” (DLLLME) was developed in this study. DLLLME was combined with liquid chromatography system to determine chlorophenoxy acid herbicide in aqueous samples. DLLLME is a rapid and environmentally friendly sample pretreatment method. In this study, 25 μL of 1,1,2,2-tetrachloroethane was added to the sample solution and the targeted analytes were extracted from the donor phase by manually shaking for 90 s. The organic phase was separated from the donor phase by centrifugation and was transferred into an insert. Acceptor phase was added to this insert. The analytes were then back-extracted into the acceptor phase by mixing the organic and acceptor phases by pumping those two solutions with a syringe plunger. After centrifugation, the organic phase was settled and removed with a microsyringe. The acceptor phase was injected into the UPLC system by auto sampler. Fine droplets were formed by shaking and pumping with the syringe plunger in DLLLME. The large interfacial area provided good extraction efficiency and shortened the extraction time needed. Conventional LLLME requires an extraction time of 40–60 min; an extraction time of approximately 2 min is sufficient with DLLLME. The DLLLME technique shows good linearity (r² ≥ 0.999), good repeatability (RSD: 4.0–12.2% for tap water; 5.7–8.5% for river water) and high sensitivity (LODs: 0.10–0.60 μg/L for tap water; 0.11–0.95 μg/L for river water).     

Sensitive determination of nitrophenol isomers by reverse-phase high-performance liquid chromatography in conjunction with liquid–liquid extraction

A method for the highly sensitive determination of 2-, 3- and 4-nitrophenols was developed using reverse-phase high-performance liquid chromatography (RP-HPLC) with a UV photodiode array detector. Using a reverse-phase column and 40% aqueous acetonitrile as an eluent (i.e. isocratic elution), the integrated peak area of detector output was linear up to 300 mg/L and the detection limit was 150 µg/L. The sensitivity of this detection method was improved by pretreating the sample solutions with a solvent extraction procedure that makes use of the high partition coefficient of ethyl acetate (EA)/water system. To find an optimum condition for the extraction procedure, this process was simulated by plotting the concentration of nitrophenol extracted in organic solvent against the volume multiplication factor at various partition coefficient of solute. This simulation demonstrated that EA is a superior extractant to other organic solvents. With the newly developed method, the detection limit was extended to 0.3 µg/L. This method offers fast, reliable and more sensitive determination of nitrophenol isomers than any other HPLC method.     

Fractionation of selenium-containing proteins in serum by multiaffinity liquid chromatography before size-exclusion chromatography–ICPMS

Immunoaffinity chromatography has been investigated for fractionation of serum into selenoalbumin and true selenoproteins. Among several albumin-depletion kits tested, a multiaffinity column specifically binding albumin and five other major serum proteins provided the best results. It extracted ca 95% of both albumin and selenoalbumin, which enabled interference-free determination of glutathione peroxidase, selenoprotein P, and selenoalbumin by size-exclusion chromatography combined with inductively coupled plasma mass spectrometry (SEC–ICPMS). The efficiency of the multiaffinity column did not vary over a period of 18 months. The purity of fractions separated by immunoaffinity LC was confirmed by elution-volume matching with standards in SEC–ICPMS and by selenopeptide mapping in capillary HPLC–ICPMS. Quantification of the selenium distribution among the different proteins in human serum from a control group and from a person on a selenium-rich diet revealed that 67% of the supplemented selenium was incorporated into albumin, 30% into glutathione peroxidase, and 3% into selenoprotein P.     

An analytical investigation of 24 oxygenated-PAHs (OPAHs) using liquid and gas chromatography–mass spectrometry

We developed two independent approaches for separation and quantitation of 24 oxygenated polycyclic aromatic hydrocarbons (OPAHs) using both liquid chromatography-atmospheric pressure chemical ionization/mass spectrometry (LC-APCI/MS) and gas chromatography-electron impact/mass spectrometry (GC-EI/MS). Building on previous OPAH research, we examined laboratory stability of OPAHs, improved existing method parameters, and compared quantification strategies using standard addition and an internal standard on an environmental sample. Of 24 OPAHs targeted in this research, 19 compounds are shared between methods, with 3 uniquely quantitated by GC-EI/MS and 2 by LC-APCI/MS. Using calibration standards, all GC-EI/MS OPAHs were within 15 % of the true value and had less than 15 % relative standard deviations (RSDs) for interday variability. Similarly, all LC-APCI/MS OPAHs were within 20 % of the true value and had less than 15 % RSDs for interday variability. Instrument limits of detection ranged from 0.18 to 36 ng mL^?1 on the GC-EI/MS and 2.6 to 26 ng mL^?1 on the LC-APCI/MS. Four standard reference materials were analyzed with each method, and we report some compounds not previously published in these materials, such as perinaphthenone and xanthone. Finally, an environmental passive sampling extract from Portland Harbor Superfund, OR was analyzed by each method using both internal standard and standard addition to compensate for potential matrix effects. Internal standard quantitation resulted in increased precision with similar accuracy to standard addition for most OPAHs using 2-fluoro-fluorenone-¹³C as an internal standard. Overall, this work improves upon OPAH analytical methods and provides some considerations and strategies for OPAHs as focus continues to expand on this emerging chemical class.

Liquid–liquid–liquid microextraction of degradation products of nerve agents followed by liquid chromatography–tandem mass spectrometry

Alkyl alkylphosphonic acids (AAPAs) are important environmental markers of nerve agents. A simple hollow fiber-based liquid–liquid–liquid microextraction (HFLLLME) technique has been developed to enrich the AAPAs from water. AAPAs were extracted from acidified aqueous phase to organic phase present in pores of the hollow fiber, and then back extracted into the alkaline acceptor phase present in the lumen of the hollow fiber. Variables affecting the HFLLLME process were optimized using a Plackett–Burman design and a Doehlert design. Optimal experimental conditions were: organic solvent, 1-octanol; pH of acceptor phase, 14; extraction time, 60 min; pH of donor phase, 1; and NaCl concentration, 10% (w/v). Depending upon the alkyl substituent, lower limits of detection varied from 0.1 to 100 ng mL⁻¹ (S/N ≥ 5). Repeatability of the method was observed with relative standard deviation of 1.49–9.83% (n = 3). After validation, the method was applied to detect AAPAs present in the water sample provided by the Organization for Prohibition of Chemical Weapons (OPCW) during the 23rd official proficiency test. The added advantage of this method is that several successive extractions of AAPAs from the same water sample can be performed.