Ultrasonic/microwave assisted extraction and diagnostic ion filtering strategy by liquid chromatography-quadrupole time-of-flight mass spectrometry for rapid characterization of flavonoids in Spatholobus suberectus

Spatholobus suberectus is a widely used herb in traditional medicine for the treatment of blood stasis syndrome and related diseases. In this work, a potential ultrasonic/microwave assisted extraction (UMAE) method was developed for efficient sample pretreatment, and a diagnostic ion filtering strategy with liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-Q-TOF-MS) was established for rapid characterization of flavonoids in S. suberectus. The factors of UMAE influencing the extraction yield of flavonoids of S. suberectus were evaluated. The optimal conditions were determined as: microwave power of 300 W, extraction time of 450 s, 70% methanol as extraction solvent, solvent to solid ratio of 20 mL/g, ultrasound power of 50 W, extraction temperature of 80 °C, and one extraction cycle. Compared with commonly used extraction methods, UMAE showed higher efficiency and shorter extraction time for sample preparation. Subsequently, the major diagnostic ions and fragmentation pathways of flavonoids in Q-TOF-MS were summarized with available reference compounds. Using a new diagnostic ion filtering strategy, a rapid screening and identification of thirty-eight compounds was achieved in real S. suberectus samples. The results of this study clearly demonstrate the potential of UMAE for efficient extraction and LC-Q-TOF-MS for rapid and sensitive structural elucidation of flavonoids in S. suberectus, and open perspectives for similar studies on other medicinal herbs.     

Removal of caffeine from green tea by microwave-enhanced vacuum ice water extraction

In order to selectively remove caffeine from green tea, a microwave-enhanced vacuum ice water extraction (MVIE) method was proposed. The effects of MVIE variables including extraction time, microwave power, and solvent to solid radio on the removal yield of caffeine and the loss of total phenolics (TP) from green tea were investigated. The optimized conditions were as follows: solvent (mL) to solid (g) ratio was 10:1, microwave extraction time was 6 min, microwave power was 350 W and 2.5 h of vacuum ice water extraction. The removal yield of caffeine by MVIE was 87.6%, which was significantly higher than that by hot water extraction, indicating a significant improvement of removal efficiency. Moreover, the loss of TP of green tea in the proposed method was much lower than that in the hot water extraction. After decaffeination by MVIE, the removal yield of TP tea was 36.2%, and the content of TP in green tea was still higher than 170 mg g⁻¹. Therefore, the proposed microwave-enhanced vacuum ice water extraction was selective, more efficient for the removal of caffeine. The main phenolic compounds of green tea were also determined, and the results indicated that the contents of several catechins were almost not changed in MVIE. This study suggests that MVIE is a new and good alternative for the removal of caffeine from green tea, with a great potential for industrial application.     

Ionic liquids based simultaneous ultrasonic and microwave assisted extraction of phenolic compounds from burdock leaves

The ionic liquids based simultaneous ultrasonic and microwave assisted extraction (IL-UMAE) technique was first proposed and applied to isolate compounds. The ionic liquids comprising a range of four anions, five 1-alkyl-3-methylimidazolium derivatives were designed and prepared. The results suggested that varying the anion and cation both had apparent effects on the extraction of phenolics. The results also showed that irradiation power, time and solid–liquid ratio significantly affected the yields. The yields of caffeic acid and quercetin obtained by IL-UMAE were higher than those by regular UMAE. Compared with conventional heat-reflux extraction (HRE), the proposed approach exhibited higher efficiency (8–17% enhanced) and shorter extraction time (from 5 h to 30 s). The results indicated ILUMAE to be a fast and efficient extraction technique. Moreover, the proposed method was validated by the reproducibility and recovery experiments. The ILUMAE method provided good recoveries (from 96.1% to 105.3%) with RSD lower than 5.2%, which indicated that the proposed method was credible. Based on the designable nature of ionic liquids, and the rapid and highly efficient performance of the proposed approach, ILUMAE provided a new alternative for preparation of various useful substances from solid samples.     

Microwave-assisted extraction of phenolics from Canarium album L. and identification of the main phenolic compound

Microwave-assisted extraction (MAE) was applied in the extraction of phenolics from Canarium album L. Effects of various conditions including the solvent, solvent to material ratio, microwave power and irradiation time on extraction yield of phenolics were investigated. In terms of the optimal conditions of MAE, it was concluded that 70% (v/v) of ethanol was the proper extraction solvent, the solvent to material ratio was 10 : 1 (mL : g), and the microwave power and irradiation time were 600 W and 15 s, respectively. Compared with normal stirring extraction and ultrasound-assisted extraction, the MAE of phenolics from C. album L. was more time efficient and gave a high extraction rate. More than 1.2% extraction yield was achieved with MAE, and the purity of the phenolics in the extract product was up to 25%. In addition, by ultraviolet-visible (UV) spectrometry and electrospray ionised mass spectrometry (ESI/MS), the main phenolic compound in the extract product was identified as gallic acid.     

Ionic Liquid-Based Ultrasonic/Microwave-Assisted Extraction Combined with UPLC for the Determination of Anthraquinones in Rhubarb

Ionic liquid-based ultrasonic/microwave-assisted extraction (IL-UMAE) of five anthraquinones (physcion, chrysophanol, emodin, rhein, and aloe-emodin) from rhubarb was first studied. Several parameters of UMAE were optimized, and the results were compared with of the heat-reflux extraction (HRE), ultrasound, and microwave-assisted extraction (MAE and UAE). The optimal UMAE conditions were as follows: the solvent was 2.0 mol L^?1 1-butyl-3-methylimidazolium bromide [bmim]Br solution, the ration of solid/liquid (g mL^?1) was 1:15, time was 2 min, and microwave power was 500 W. Under these UMAE conditions, total content of five anthraquinones was 28.00 mg g^?1. Compared with the conventional HRE, regular MAE and UAE techniques, the proposed approach exhibited higher efficiency (18.90?C24.40% enhanced) and shorter extraction time (from 6 h to 2 min). The anthraquinones were then determined by ultra performance liquid chromatography (UPLC). Based on optimized conditions, contents of physcion, chrysophanol, emodin, rhein and aloe-emodin in rhubarb collected from different cultivated areas were 0.68?C2.99, 5.03?C15.40, 0.48?C4.34, 0.025?C3.93 and 0.26?C2.56 mg g^?1, respectively. This study suggests that IL-UMAE was an efficient, rapid, simple and green preparation technique.     

中药大黄中蒽醌的微波辅助流动萃取研究

利用微波辅助流动萃取法提取大黄中的蒽醌类化合物，考察了微波提取条件(包括溶剂浓度、微波辐射功率、溶剂提升量)对大黄中葸醌提取率的影响，采用分光光度法测定提取液中蒽醌的含量．结果表明溶剂为60%乙醇，提升量为4mL／min，微波功率为80％时，提取效率最佳．微波辅助流动萃取法与超声波法和索氏提取法相比，具有提取效率高，时间短且节能的良好特点．     

微波辅助萃取鬼箭羽叶中芦丁和槲皮素

建立了鬼箭羽中主要有效成分芦丁和槲皮素的MAE-HPLC定量分析方法, 该方法具有测定准确、操作简便和分析速度快等优点. 此外, 利用扫描电镜观察了鬼箭羽叶经微波辅助萃取后植物结构的变化, 初步证明了微波辅助萃取鬼箭羽叶的萃取机理符合细胞破壁学说.     

An efficient microwave assisted extraction of phenolic compounds and antioxidant potential of Ginkgo biloba

Flavonoid glycosides are a significant group of compounds found in Ginkgo biloba leaves, but the long extraction procedures in existing methods are a challenging problem. In this work, a microwave-assisted extraction (MAE) method has been developed for extracting bioactive compounds from G. biloba. Several variables were optimized, such as extracting solvent, microwave power, and extraction time that can potentially affect the extraction yield. The total phenolic content, antioxidant activity (using DPPH, ABTS and FRAP assays) and flavonoid glycosides of different extracts using RP-HPLC were assessed. The antioxidant capacity was found to be highest with MAE using 60% aq. ethanol as extracting solvent and microwave power of 120W for 20 min.     

Clean recovery of antioxidant flavonoids from onions: Optimising solvent free microwave extraction method

A solvent free microwave hydrodiffusion and gravity extraction (MHG) of flavonol content from onion (Allium cepa L.) was studied. Effectiveness of this innovative method in extraction of onion total phenolic content, total quercetin (TQ), quercetin aglycon (QA), quercetin-3,4′-diglucoside (QDG), quercetin-4′-monoglucoside (Q4G), quercetin-3-monoglucoside (Q3G), kaempferol (KMF) and myricetin (MRT) have been evaluated and compared with conventional solvent extraction. Microwave extraction offers important advantages like shorter extraction time (23 min), cleaner feature (no solvent or water used) and extraction of valuable onion crude juice retaining fresh organoleptic properties with higher phenolic content (58.29 mg GAE/g DW) at optimized power (500 W). Microwave extraction resulted significant yield (81.5%) with 41.9% of flavonol contents, with better retain of remaining flavonoids (55.9%) in residues of onions. QDG (239.7 mg/100 g DW) and Q4G (82.55 mg/100 g DW) have been reported the main flavonol in this study. Minor quantities of QA (traces), Q3G (4.22 mg/100 g DW) and KMF (3.99 mg/100 g DW) were also detected in microwave onion extracts.     

Optimization of MAE for the Separation of Nicotine and Phenolics from Tobacco Waste by Using the Response Surface Methodology Approach

This study intends to valorize by-products of the industrial processing of tobacco to obtain nicotine and phenolics as value-added compounds. Three influential parameters of the microwave-assisted extraction-MAE (temperature, treatment time, and solvent/solid ratio) were studied for the optimization of the extraction protocol for tobacco leaves and three types of waste—scrap, dust, and midrib, respectively. Nicotine was the dominant bioactive compound in all extracts, ranging from 1.512 to 5.480% in leaves, 1.886 to 3.709% in scrap, 2.628 to 4.840% dust, and 0.867 to 1.783% in midrib extracts. Five phenolic compounds were identified and quantified, predominated by chlorogenic acid and rutin. Additionally, total phenol content and antioxidant activity were determined using spectrophotometric assays. Optimization was performed in two aspects: to obtain a maximum extraction yield with minimum nicotine content and to obtain a maximum extraction yield with maximum nicotine content. These findings demonstrate that tobacco waste is a valuable source of bioactive compounds and MAE can be a promising alternative technique to obtain extracts rich in targeted bioactive compounds, especially nicotine.     

Analysis of chlorophenols,bisphenol-A, 4-tert-octylphenol and 4-nonylphenols in soil by means of ultrasonic solvent extraction and stir bar sorptive extraction with in situ derivatisation

A novel method based on ultrasonic solvent extraction and stir bar sorptive extraction for the analysis of phenolic organic pollutants including chlorophenols, bisphenol-A, 4-tert-octylphenol and 4-nonylphenol in soil samples was developed. The different parameters that affect both the extraction of analytes from the soil samples, such as solvent selection, extraction time, and the partitioning from the solvent/water mix to poly(dimethylsiloxane) (PDMS) were studied. The final selected conditions consisted of the extraction of 1 g of soil with 15 mL methanol by sonication for 30 min. The methanol extract was mixed with 85 mL of Milli-Q water and extracted by means of stir bar sorptive extraction with in situ derivatisation. The stir bars were analyzed by thermal desorption–gas chromatography–mass spectrometry (TD–GC–MS). The effects of the matrix on the recovery of the various pollutants under the developed method were studied using two soils with very different physicochemical properties. Method sensitivity, linearity, repeatability, and reproducibility were also studied. Validation and accuracy of the method were conducted by analyzing two commercial certified reference materials and by comparing the analysis of real samples with the proposed method and a classical method using pressurized solvent extraction (PSE)–GC–MS. The main advantage of this method is a substantial solvent reduction. For the extraction of only 1 g of solid sample allowing limits of detection ranging from 0.2 to 1.7 μg kg⁻¹ dw. Repeatability and reproducibility variation were lower than 20% for all investigated compounds. Results of the certified reference materials and the real samples verify the high accuracy of this method.     

Simultaneous determination of sulfonamides and metabolites in manure samples by one-step ultrasound/microwave-assisted solid–liquid–solid dispersive extraction and liquid chromatography–mass spectrometry

An in-line matrix cleanup method was used for the simultaneous extraction of 15 sulfonamides and two metabolites from manure samples. The ultrasound/microwave-assisted extraction (UMAE) combined with solid–liquid–solid dispersive extraction (SLSDE) procedure provides a simple sample preparation approach for the processing of manure samples, in which the extraction and cleanup are integrated into one step. Ultrasonic irradiation power, extraction temperature, extraction time, and extraction solvent, which could influence the UMAE efficiency, were investigated. C₁₈ was used as the adsorbent to reduce the effects of interfering components during the extraction procedure. The extracts were concentrated, and the analytes were analyzed by liquid chromatography–tandem mass spectrometry (LC–MS/MS) without any further cleanup. The isotopically labeled compounds sulfamethoxazole-d ₄, sulfamethazine-d ₄, sulfamonomethoxine-d ₄, and sulfadimethoxine-d ₆ were selected as internal standards to minimize the matrix effect in this method. The recoveries of the antibiotics tested ranged from 71 to 118 % at the three spiking levels examined (20, 200, and 500 μg?·?kg^-1). The limits of detections were 1.2–3.6 μg?·?kg^-1 and the limits of quantification were 4.0–12.3 μg?·?kg^-1 for the sulfonamides and their metabolites. The applicability of the method was demonstrated by analyzing 30 commercial manure samples. The results indicated that UMAE–SLSDE combined with LC–MS/MS is a simple, rapid, and environmentally friendly method for the analysis of sulfonamides and their metabolites in manure, and it could provide the basis for a risk assessment of the antibiotics in agricultural environments.     

Microwave-assisted extraction of phenolic compounds from grape seed

A microwave-assisted extraction technique was developed to optimize the extraction of phenolic compounds from grape seeds. The microwave power (300-150W) and time of extraction (20-200s) were varied during the optimization process. The polyphenol content of the resulting extracts were measured as mg of tannic acid equivalent per gram of crude extract (mg TAE/g of crude extract), using a Folin-Ciocalteau reagent. In general, neither the time nor the power had a significant effect on the overall % yield (average of 13.5%) and on the polyphenol content (392 mg TAE/g of crude extract) of the extracts. However, when the solvent polarity was changed by the addition of 10% water, the yield increased to 15.2% and the polyphenol content increased to 429 mg TAE/g of crude extract.     

紫草中活性成分的非极性溶剂动态微波提取及高效液相色谱法测定

用非极性溶剂动态微波辅助提取,高效液相色谱法测定紫草中的紫草素和β,β′-二甲基丙烯酰紫草素.考察了微波吸收介质类型、提取溶剂种类、提取溶剂流速、微波功率和样品粒度对提取产率的影响,优化提取参数.在优化条件下,将所建立的方法与超声提取和索氏提取相比,所得紫草素和β,β′-二甲基丙烯酰紫草素的产率相差不大,但本文所建立的方法所需提取时间短(5min)、溶剂消耗少(10mL).与极性溶剂动态微波辅助提取相比,提取产率大幅度提高.结果说明,所建立的方法是一种有效的提取中草药中一些活性成分的方法,特别是对于一些在非极性溶剂中有更高溶解度的化合物,此方法更具优势.     

Multi-residue determination of phenolic and salicylanilide anthelmintics and related compounds in bovine kidney by liquid chromatography–tandem mass spectrometry

This paper describes an analytical method for four phenolic and salicylanilide anthelmintics authorised for use within the EU (nitroxinil, oxyclozanide, rafoxanide and closantel) in bovine kidney, and the extension of this procedure to include a number of related compounds; ioxynil, niclosamide, salicylanide and 3-trifluoromethyl-4-nitrophenol (TFM). The method comprises a solvent extraction with 1% acetic acid in acetone and clean-up using a mixed-mode anion-exchange solid phase extraction column. Determination is by reversed phase LC–MS/MS. The method was validated to the latest EU requirements (Commission Decision 2002/657/EC) using both spiked and incurred tissues and was subject to second laboratory evaluation.     

Ultrasound‐enhanced and microwave‐assisted extraction of lipid from Dunaliella tertiolecta and fatty acid profile analysis

Microalgal lipid is considered as a potential biodiesel resource due to its advantages compared to other bioresources. The production of biofuel from microalgae includes several stages like microalgae cultivation, biomass harvest, biomass treatment, lipid extraction, and the ultimate biodiesel synthesis. Lipid extraction is closely associated with the productivity and cost of energy production. In the present study, lipid of green algae Dunaliella tertiolecta was extracted by chemical agents with involvement of ultrasound and microwave. The optimization of experimental conditions was carried out by response surface methodology and orthogonal test design. Using the ultrasonic technique, an extraction rate of 45.94% was obtained under the optimum conditions of ultrasonic power 370 W, extraction time 5 min and liquid/solid ratio 125 mL/g. The extraction rate of 57.02% was obtained by the means of microwave assistance under the optimized conditions of extraction time 160 s, microwave power 490 W and liquid/solid ratio 100 mL/g. The comparison of the two results indicated microwave was more effective than ultrasound in extracting process. When the two techniques were utilized in combination, the optimized condition was ultrasonic power 320 W, ultrasonic time 4 min, microwave power 280 W, microwave time 120 s and liquid/solid ratio 100 mL/g, and the extraction rate was 49.97%.     

Rapid analysis of the essential oil components of dried Zanthoxylum bungeanum Maxim by Fe2O3‐magnetic‐microsphere‐assisted microwave distillation and simultaneous headspace single‐drop microextraction followed by GC–MS

In this work, microwave distillation assisted by Fe₂O₃ magnetic microspheres (FMMS) and headspace single‐drop microextraction were combined, and developed for determination of essential oil compounds in dried Zanthoxylum bungeanum Maxim (ZBM). The FMMS were used as microwave absorption solid medium for dry distillation of dried ZBM. Using the proposed method, isolation, extraction, and concentration of essential oil compounds can be carried out in a single step. The experimental parameters including extraction solvent, solvent volume, microwave power, irradiation time, and the amount of added FMMS, were studied. The optimal analytical conditions were: 2.0 μL decane as the extraction solvent, microwave power of 300 W, irradiation time of 2 min, and the addition of 0.1 g FMMS to ZBM. The method precision was from 4 to 10%. A total of 52 compounds were identified by the proposed method. The conventional steam distillation method was also used for the analysis of essential oil in dried ZBM and only 31 compounds were identified by steam distillation method. It was found that the proposed method is a simple, rapid, reliable, and solvent‐free technique for the determination of volatile compounds in Chinese herbs.     

Antioxidant,anti-lipidemic,hypoglycemic and antiproliferative effects of phenolics from Cortex Mori Radicis

Cortex Mori Radicis (CMR) is enriched in various phenolics, this study aimed to estimate the antioxidant effect, enzyme (lipase, α-amylase, α-glucosidase and acetyl-cholinesterase) inhibition and the anti-proliferative effect of the phenolic compounds in CMR. However, the amount of these compounds obtained from CMR is highly dependent on the processing conditions. In this study, the processing parameters of extracting the phenolics from CMR using ultrasonic technique pooled with high-speed shearing extraction (UTPHSE) were optimized. Subsequently, the phenolics from Cortex Mori Radicis (PCMR) were purified using AB-8 macroporous resin, and their chemical analysis, antioxidant, enzyme inhibition, and antiproliferative activities were studied. Based on our findings, the optimal parameters of UTPHSE were: L/S ratio 25.8:1 (mL/g), voltage 81.0 V, ultrasonic temperature 51.8 ℃ and ultrasonic time 289 s. And under the optimal extraction conditions, the extraction rate of the PCMR was 0.531 ± 0.004%. Compared with PCMR, the contents of “total phenolics, flavonoids, flavonols, flavanols and phenolic acids” increased 2.30, 2.67, 2.59, 3.63 and 2.72 times in the purified phenolics from Cortex Mori Radicis (PPCMR), respectively. In addition, PPCMR depicted significant DPPH, ABTS⁺ and superoxide anion radicals’ scavenging capability, reducing power, ferric ion reducing antioxidant power (FRAP) and remarkable inhibitory activities on “lipase, alpha-amylase, alpha-glucosidase, and the proliferation of HeLa, HepG2 and NCI-H460”. At the same time, the morphological changes of HeLa, HepG2 and NCI-H460 cells suggested that PPCMR could effectively inhibit the proliferation of tumor cells in vitro. Therefore, PPCMR have good potential as natural antioxidants, antilipidemic, hypoglycemic, and antineoplastic agents in functional foods and pharmaceuticals.     

A cost effective,sensitive, and environmentally friendly sample preparation method for determination of polycyclic aromatic hydrocarbons in solid samples

A simple, cost effective, and yet sensitive sample preparation technique was investigated for determining Polycyclic Aromatic Hydrocarbons (PAHs) in solid samples. The method comprises ultrasonic extraction, Stir Bar Sorptive Extraction (SBSE), and thermal desorption–gas chromatography–mass spectrometry to increase analytical capacity in laboratories. This method required no clean-up, satisfied PAHs recovery, and significantly advances cost performance over conventional extraction methods, such as Soxhlet and Microwave Assisted Extraction (MAE). This study evaluated three operational parameters for ultrasonic extraction: solvent composition, extraction time, and sample load. A standard material, SRM 1649 a (urban dust), was used as the solid sample matrix, and 12 priority PAHs on the US Environmental Protection Agency (US EPA) list were analyzed. Combination of non-polar and polar solvents ameliorated extraction efficiency. Acetone/hexane mixtures of 2:3 and 1:1 (v/v) gave the most satisfactory results: recoveries ranged from 63.3% to 122%. Single composition solvents (methanol, hexane, and dichloromethane) showed fewer recoveries. Comparing 20 min with 60 min sonication, longer sonication diminished extraction efficiencies in general. Furthermore, sample load became a critical factor in certain solvent systems, particularly MeOH. MAE was also compared to the ultrasonic extraction, and results determined that the 20-min ultrasonic extraction using acetone/hexane (2:3, v/v) was as potent as MAE. The SBSE method using 20 mL of 30% alcohol-fortified solution rendered a limit of detection ranging from 1.7 to 32 ng L⁻¹ and a limit of quantitation ranging from 5.8 to 110 ng L⁻¹ for the 16 US EPA PAHs.     

Characterization of volatile components of Iranian saffron using factorial-based response surface modeling of ultrasonic extraction combined with gas chromatography–mass spectrometry analysis

The volatile components of Iranian saffron were extracted using ultrasonic solvent extraction (USE) technique and then were separated and detected by gas chromatography–mass spectrometry (GC–MS). Variables affecting the extraction procedure were screened by using a 2⁵⁻¹ fractional factorial design and among them; sample amount, solvent volume, solvent ratio and extraction time were optimized by applying a rotatable central composite design (CCD). The optimum values of factors were: 2.38 g sample, 29.04 mL solvent, 69.23% MeOH solvent ratio and 71.8 min for the extraction time. Forty constituents were identified for Iranian saffron by GC–MS representing 90% of the total peak area. The major components were 2,6,6-trimethyl-1,3-cyclohexadiene-1-carboxaldehyde, namely safranal (26.29%), bicyclo[3,2,0]hept-2-ene-,4-ethoxy-,endo (5.69%), linoleic acid (4.77%), 4-hydroxy-2,6,6-trimethyl-1-cyclohexene-1-carboxaldehyde, namely HTCC (4.44%), and nonadecanol (3.32%). Some new compounds were identified for the first time in saffron. In addition, the results of this study were compared with those of Greek saffron.