Enantiomer separation of rac-2,2′-dihydroxy-1,1′-binaphthyl (BNO) by inclusion complexation with racemic or achiral ammonium salts and a novel transformation of a 1:1:1 racemic complex of BNO, Me4N·Cl and MeOH into a conglomerate complex in the solid state

The complete simultaneous and mutual enantiomer resolution of 2,2′-dihydroxy-1,1′-binaphthyl (BNO) and N-(3-chloro-2-hydroxypropyl)-N,N,N-trimethylammonium chloride, Me₃N⁺CH₂CH(OH)CH₂Cl·Cl⁻ into their enantiomers by inclusion complexation between their racemates in EtOH in the presence of a chiral seed crystal is reported. The enantiomer resolution of the rac-BNO was also accomplished easily by inclusion complexation with achiral ammonium salts, N-(2-hydroxyethyl)-N,N,N-trimethylammonium chloride, Me₃N⁺CH₂CH₂OH·Cl⁻ and tetramethylammonium chloride, Me₄N⁺·Cl⁻. Inclusion complexation of the rac-BNO with Me₃N⁺ CH₂CH₂OH·Cl⁻ gave only a 1:1 conglomerate inclusion complex but not a racemic complex. Recrystallization of the rac-BNO and an equimolar amount of Me₄N⁺·Cl⁻ from MeOH (7 ml) and MeOH (15 ml) gave a 1:1:1 racemic complex, BNO·Me₄N⁺·Cl⁻·MeOH and a 1:1 conglomerate complex, BNO·Me₄N⁺·Cl⁻, respectively. Novel transformation of the former racemate into the latter conglomerate occurred by heating or by exposure to MeOH vapor in the solid state.     

Synthesis and separation of the atropisomers of 2-(5-benzo[b]fluorenyl)-2′-hydroxy-1,1′-binaphthyl and related compounds

Several syn and anti atropisomers of 2-(5-benzo[b]fluorenyl)-2′-hydroxy-1,1′-binaphthyl and related compounds were synthesized from 1,1′-binaphthyl-2,2′-diol (BINOL). It was possible to separate the syn and anti atropisomers by silica gel column chromatography. The syn atropisomers are potential hetero-bidentate ligands for complex formation with metals. By starting from enantiomerically pure (R)-(+)-BINOL and (S)-(−)-BINOL, four optically active syn atropisomers and two anti atropisomers with high enantiomeric purity were obtained. The structures of two syn atropisomers and one anti atropisomer were established by X-ray structure analyses.     

Synthesis and anion binding studies of a new crown ether containing 2,2′-biimidazole

A novel crown ether which incorporates the 2,2′-biimidazole moiety was prepared by cyclization of 1,1′-dibenzyl-1H,1′H-[2,2′]biimidazolyl-4,4′-dicarboxylic acid and 4,7,10-trioxa-1,13-tridecanediamine followed by removal of the benzyl groups. The diacid has been obtained by hydrolysis of the diester previously prepared by alcoholysis of the corresponding dicyano biimidazole. The cyano group is introduced by a palladium-catalyzed procedure starting from the corresponding dibromo biimidazole. The macrocyclic structure of the N-dibenzylated derivative of the receptor has been studied by X-ray diffraction. Binding constants for 1:1 biimidazole–anion complexation (K_assoc) are on the order of 10⁵ M⁻¹ for H₂PO₄⁻ and Cl⁻.     

1,1′-Methylene-bis(1,1′,2,2′,3,3′,4,4′-octahydroisoquinoline): synthesis, reaction, resolution, and application in catalytic enantioselective transformations

The preparation of new chiral 1,3-diamine ligand systems based on the 1,1′-methylene-bis(1,1′,2,2′,3,3′,4,4′-octahydroisoquinoline) framework is described. Synthesis of various mono-, di-, and bridged N-alkyl derivatives are presented. Resolution of one compound, its Cu(I)Br X-ray crystallographic structure and the preliminary results on its application in the enantioselective Henry and Aldol reactions are disclosed.     

The highly regiospecific synthesis and crystal structure determination of 1,1′-2,5′ substituted ring-locked ferrocenes

1,1′-Ferrocene biscarboxaldehyde (1) has been prepared and the aldehyde groups were subsequently protected with acetal groups to produce 1,1′-bisacetalferrocene (2). A ring-locked ferrocene was synthesised by further derivatisation of the cyclopentadiene rings at the 2,2′ positions with phosphine substituents to produce 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene (3), which was subsequently coordinated to either a nickel chloride (5) or nickel bromide (6) metal centre. The ring-locked ferrocene complexes produced 2,5′-bis-(acetal)-1,1′-diphenylphosphinoferrocene substitution patterns. The acetal protecting groups of 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene were removed to produce 1,1′-bis-carboxaldehyde-2,2′-diphenylphosphinoferrocene (4). The Cp rings of 1,1′-bisacetalferrocene were also further derivatised at the 2,2′ positions with a silane to produce the ring-locked 1,1′-siloxane-2,5′-bisacetalferrocenophane (7). The acetal protecting groups were removed from this to produce 1,1′-siloxane-2,5′-ferrocenophanecarboxaldehyde (8). For both the phosphine and siloxane electrophiles, the substitution on the Cp rings gives chiral products (obtained as racemic mixtures). Due to the highly regioselective nature of the reaction and diastereoselectivity in the products only C₂-symmetric compounds were observed without the presence of meso diastereoisomers. Subsequent ring-locking forced the Cp rings to rotate, leading to 1,1′-ring-locked ferrocenes with 2,5′-arrangement of the acetal groups (i.e. on opposite faces of the ferrocene unit).     

New active ruthenium(II) complexes based N3,N3′-bis(diphenylphosphino)-2,2′-bipyridine-3,3′-diamine and P,P′-diphenylphosphinous acid-P,P′-[2,2′-bipyridine]-3,3′-diyl ester ligands for transfer hydrogenation of aromatic ketones by propan-2-ol

The dimeric starting material [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ reacts with N3,N3′-bis(diphenylphosphino)-2,2′-bipyridine-3,3′-diamine, 1 and P,P′-diphenylphosphinous acid-P,P′-[2,2′-bipyridine]-3,3′-diyl ester, 2 ligands to afford bridged dinuclear complexes [C₁₀H₆N₂{NHPPh₂-Ru(η⁶-p-cymene)Cl₂}₂], 3 and [C₁₀H₆N₂{OPPh₂-Ru(η⁶-p-cymene)Cl₂}₂], 4 in quantitative yields. These bis(aminophosphine) and bis(phosphinite) based Ru(II) complexes serve as active catalyst precursors for the transfer hydrogenation of acetophenone derivatives in 2-propanol and especially 4 acts as a good catalyst, giving the corresponding alcohols in 99% yield in 20 min (TOF ? 280 h⁻¹).     

Enantioselective synthesis of (R) and (S)-[9,9′]bi[naphtho(2,1-b)furanyl]-8,8′-diol: a furo-fused BINOL derivative

The enantioselective synthesis of [9,9′]bi[naphtho(2,1-b)furanyl]-8,8′-diol, a modified BINOL, was achieved using an inexpensive route. Both enantiomers of [9,9′]bi[naphtho(2,1-b)furanyl]-8,8′-diol were obtained with satisfactory stereoselectivities by employing two optical antipodes of phenylethylamine as chiral influence in a Cu(II)Cl₂ catalyzed oxidative coupling step.     

Production of mixed halogenated congeners of the natural product heptachloro-1′-methyl-1,2′-bipyrrole (Q1) by photolysis in the presence of bromine

Halogenated 1′-methyl-1,2′-bipyrroles (MBPs) are a class of marine halogenated natural products that have been detected in biota from all over the world. However, structures and standards of many mixed chlorinated/brominated MBPs are not available. For this reason, the known 2,3,3′,4,4′,5,5′-heptachloro-1′-methyl-1,2′-bipyrrole (Q1 or MBP-79) was UV-irradiated in the presence of bromine with the goal of inducing a chlorine → bromine exchange. A few drops of bromine were added to a solution of Q1 and 10 mL of either CH₂Br₂, CH₂Cl₂, or CHCl₃. The experiments were performed both at room temperature and elevated temperature for 30 min. At least four out of five possible bromohexachloro-1′methyl-1,2′-bipyrroles (BrCl₆-MBPs), at least seven out of 13 possible Br₂Cl₅-MBPs, as well as traces of Br₃Cl₄-MBPs and Br₄Cl₃-MBPs were obtained in this way. Selective fragment ions in the GC/ECNI-MS spectra as well as electrophilic bromination of hexachloro-MBP solutions were used to verify the structures of the BrCl₆-MBP isomers. The BrCl₆-MBPs eluted from DB-5-like columns in the order of 4′-bromo-2,3,3′,4,5,5′-hexachloro-1′-methyl-1,2′-bipyrrole (Br-MBP-76), which co-eluted with 3′-bromo-2,3,4,4′,5,5′-hexachloro-1′-methyl-1,2′-bipyrrole (Br-MBP-78), followed by 2-bromo-3,3′,4,4′,5,5′-hexachloro-1′-methyl-1,2′-bipyrrole (Br-MBP-75), 3-bromo-2,3′,4,4′,5,5′-hexachloro-1′-methyl-1,2′-bipyrrole (Br-MBP-77), and 5′-bromo-2,3,3′,4,4′,5-hexachloro-1′-methyl-1,2′-bipyrrole (Br-MBP-74). These BrCl₆-MBPs were also detected in a sample of cetacean blubber from Australia, but the abundance pattern was different. While Br-MBP-76/Br-MBP-78 dominated in the cetacean, irradiation of Q1 (MBP-79) in the presence of bromine led to high proportions of Br-MBP-75. The suitability of the UV-induced Cl → Br exchange was confirmed by the Br-assisted UV-irradiation of pentachloroanisole (PCA). This experiment produced at least two bromotetrachloro- and three dibromotrichloroanisoles, the last eluting in each case being the most relevant. Thus, this method is most likely generally suited for the production of mixed-halogenated aromatic organohalogen compounds which are not readily obtainable by synthesis.     

Scandium triflate-catalyzed 6,6′-diiodination of 2,2′-dimethoxy-1,1′-binaphthyl with 1,3-diiodo-5,5-dimethylhydantoin

Scandium triflate-catalyzed iodination of 2,2′-dimethoxy-1,1′-binaphthyl with 2 equiv of 1,3-diiodo-5,5-dimethylhydantoin (DIH) proceeded to give 6,6′-diiodo-2,2′-dimethoxy-1,1′-binaphtyl in 98% yield and subsequent deprotection of methyl groups provided 6,6′-diiodo-1,1′-binaphthol, which is a useful ligand or reagent for many enantioselective transformations. Use of 2 equiv of NIS in place of DIH in the presence of scandium triflate, however, did not successfully yield 6,6′-diiodo-2,2′-dimethoxy-1,1′-binaphtyl, indicating that one of two types of iodine atoms in DIH is more reactive toward the iodination than iodine in NIS.     

5,5′-二甲基-2,2′-二茚满-1,1′,3,3′-四酮的合成及结构表征

本文以4-甲基邻苯二甲酸酐为原料, 成功地合成了5,5′-二甲基-2,2′-二茚满-1,1′,3,3′-四酮(2). 通过元素分析、核磁共振、红外光谱及质谱等测试手段, 确定了化合物2的结构与存在形式, 通过ESR测试发现化合物2具有顺磁性.     

Solid-state anion interactions in the diastereoisomers of dinuclear ruthenium complexes based on 2,2′-bipyrimidine

The cations in the solid-state structures of meso-(ΛΔ)-[{Ru(bpy)₂}₂(μ-bpm)](PF₆)₄, meso-(ΛΔ)-[{Ru(Me₂bpy)₂}₂(μ-bpm)](tos)₄ · 2CH₃OH · 4H₂O and meso-(ΛΔ)-[{Ru(Me₄bpy)₂}₂(μ-bpm)](tos)₄ · 26H₂O (bpm = 2,2′-bipyrimidine; bpy = 2,2′-bipyridine; Me₂bpy = 4,4′-dimethyl-2,2′-bipyridine; Me₄bpy = 4,4′,5,5′-tetramethyl-2,2′-bipyridine; tos⁻ = toluene-4-sulfonate anion) exhibit similar features including comparable bond lengths and angles, and metal–metal separations of 5.56–5.59 Å. The counter-ions present in the structures reside in the clefts above and below the plane of the bridging ligand, but show considerable variation in location compared with their known occupancy in solution.     

Facile acid-catalyzed condensation of 2-hydroxy-2,2′-biindan-1,1′,3,3′-tetrone with phenols, methoxyaromatic systems and enols

Various phenols, methoxy aromatic compounds, 3- and 4-hydroxycoumarins and enols smoothly condense with 2-hydroxy-2,2′-biindan-1,1′,3,3′-tetrone 1 in an acid medium producing 2-aryl/alkyl-2,2′-biindan-1,1′,3,3′-tetrones in high yields. The adducts of resorcinol, 1,3,5-trihydroxybenzene and α- and β-naphthols of 1 preferably remain in the intramolecular hemi-ketal form, confirmed by X-ray diffraction studies. On the other hand para and meta substituted phenols condense with 1 in an acid medium to produce 6 or 7 substituted 2′,4-spiro(1′,3′-indanedion)-indeno[3,2-b]chromenes in good yields.     

Enantioselective alkynylation to aldimines catalyzed by chiral 2,2′-di(2-aminoaryloxy)-1,1′-binaphthyl-copper(I) complexes

The enantioselective alkynylation of aldimines with terminal acetylenes catalyzed by chiral Cu(I) complexes with (R)-2,2′-di(2-aminoaryloxy)-1,1′-binaphthyl ligands (7) was examined. Chiral C₂-symmetric N,N-ligands 7, which have primary aniline moieties, were readily prepared from inexpensive (R)-1,1′-binaphthol (BINOL) as a chiral source. In particular, the reaction of N-benzylidenebenzeneamine 1a with phenylacetylene 2a proceeded smoothly in the presence of 5 mol % of (CuOTf)₂·C₆H₅CH₃ and 10 mol % of (R)-7d at room temperature for 24 h, and the corresponding propargylamine 3a was obtained with up to 82% ee.     

A new route to 2,2′,3,3′-tetrasubstituted binaphthyls

Based on an ortho-lithiation protocol of 2,2′-dibromo-1,1′-binaphthyl four tetrasubstituted binaphthyls, 2,2′-dibromo-3,3′-diiodo-, 3,3′-dibromo-2,2′-diiodo-, 2,2′,3,3′-tetrabromo-, and 2,2′,3,3′-tetraiodo-1,1′-binaphthyls have been prepared in excellent yield which in turn proved to be versatile key intermediates in the synthesis of various 2,2′,3,3′-tetrasubstituted 1,1′-binaphthyl derivatives.     

New N-acyl, N-alkyl, and N-bridged derivatives of rac-6,6′,7,7′-tetramethoxy-1,1′,2,2′,3,3′,4,4′-octahydro-1,1′-bisisoquinoline

The preparation of potential new ligand systems based on the rac-1,1′,2,2′,3,3′,4,4′-octahydro-6,6′,7,7′-tetramethoxy-1,1′-bisisoquinoline skeleton has been investigated. Syntheses of N-(2-bromobenzyl), N-(3-acetoxybenzyl), N-acetyl, N-chloroacetyl, N-chlorocarbonyl, N-ethoxycarbonyl and N-tert-butyloxycarbonyl derivatives and five macrocyclic, polyether containing derivatives are described.     

New C2-symmetric 2,2′-bipyridine crown macrocycles for enantioselective recognition of amino acid derivatives

A series of new C₂-symmetric 2,2′-bipyridine-contaning crown macrocycles 1-4 has been developed for enantiomeric recognition of amino acid derivatives. These new macrocycles have been showed to be strong complexing agents for primary organic ammonium salts (with K up to 4.83×10⁵ M⁻¹ and −ΔG₀ up to 32.4 kJ mol⁻¹) and also useful chromophores for UV-vis titration studies. These macrocyclic hosts exhibited enantioselective binding towards the (S)-enantiomer of phenylglycine methyl ester hydrochloride (Am1) with K_(S)/K_(R) up to 2.10 (ΔΔG₀=−1.84 kJ mol⁻¹) in CH₂Cl₂ with 0.25% CH₃OH. The structure-binding relationship studies showed that the aromatic subunit and the ester group of the ammonium guests are both important for good enantioselectivity. In addition, the host-guest complexes have been studied using various NMR experiments.     

The counterion influence on the CH-activation of methane by palladium(II) biscarbene complexes - structures, reactivity and DFT calculations

Novel bridged palladium(II) biscarbene complexes with different counterions are reported: 1,1^′-dimethyl-3,3^′-methylene-4-diimidazolin-2,2^′-diylidene palladium(II) bischloride (1) and bis(trifluoroacetate) (2) have been synthesized in good yields. Both complexes are active in the catalytic conversion of methane to methanol and show comparable activities to previously published NHC-catalysts. The results of the single-crystal X-ray structure determination of 1,1^′-dimethyl-3,3^′-methylene-4-diimidazolin-2,2^′-diylidene palladium(II) bischloride (1) and 1,1^′-dimethyl-3,3^′-methylene-4-diimidazolin-2,2^′-diylidene palladium (II) bis(trifluoro-acetate) 2 confirmed the structural similarity to the known corresponding palladium bromide and iodide complexes. Since free 1,1^′-dimethyl-R-3,3^′-methylene-4-diimidazolin-2,2^′-diylidene are only available in low yields these compounds have been synthesized via the bromide complex, exchanging the counterion by AgCF₃COO or by exchanging the counterion of the imidazolium salt by NH₄PF₆.     

Synthesis of 1′,3,3′,4-tetrahydrospiro[chromene-2,2′-indoles] as a new class of ultrafast light-driven molecular switch

A new class of ultrafast light-driven molecular switch has been designed and synthesized. The reaction of 1-substituted 2-methylidene-3,3-dimethyl-2,3-dihydro-1H-indoles with 2-chloromethyl-4-nitrophenol afforded 1′,3,3′,4-tetrahydrospiro[chromene-2,2′-indoles], following a basic workup. The spectroscopic properties and nanosecond-resolved photoinduced dynamics of five compounds in the 1′,3,3′,4-tetrahydrospiro[chromene-2,2′-indole] family were investigated.     

Ti-catalyzed reactions of 4,4′-bis(trimethylsilyl)bicyclohexyl-2,2′-diene with various electrophiles

Reductive disilylation (Li + Me₃SiCl − THF) of 1,3-cyclohexadiene led to 4,4′-bis(trimethylsilyl)bicyclohexyl-2,2′-diene (1). In the presence of TiCl₄ in dichloromethane, 1 reacted with some acyl chlorides, anhydrides, and aldehydes to give tricyclo[7.4.0.0^3,8]trideca-4,12-diene-2-yl derivatives.     

A simple synthetic approach to homochiral 6- and 6′-substituted 1,1′-binaphthyl derivatives

Various homochiral binaphthyl derivatives having functional groups at the 6-position are important key intermediates for the immobilization of binaphthyl compounds on various solid-supports and have been prepared from commercially available 1,1′-bi-2-naphthol via controlled monopivalation of the 2-hydroxyl group and electrophilic aromatic substitution at the 6-position. (S)-2,2′-Bis-((S)-4-alkyloxazol-2-yl)-6-(2-methoxycarbonyl)ethyl-1,1′-binaphthyls (6-functionalized (S,S)-boxax)) were prepared and immobilized on various polymer supports including PS-PEG, PS, PEGA and MeO-PEG resin.