Applications of capillary electrophoresis with laser-induced fluorescence for analysis of dGMP–BPDE adduct

DNA adducts are thought to be crucial to the initiation of mutational and carcinogenic processes. Polycyclic aromatic hydrocarbons (PAHs) have been identified as one major source of carcinogenic risk since they can bind to DNA thus forming an adduct. Quantification of this adduct is important because it may correlate to the risk for cancer development. In this study, the adduct formed between 2'-deoxyguanosine 5'-monophosphate and benzo[ a]pyrene-7,8-dihydrodiol-9,10-epoxide (BPDE) was analyzed by capillary electrophoresis. Both capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MECC) modes with laser-induced fluorescence detection were used for the separation and analysis of DNA adducts. The exploration of capillary electrophoresis in several modes provided different separation mechanisms in which the stereochemical forms of the adduct could be separated. The best result obtained was using a coated fused-silica capillary in Tris-TAPS buffer, which provided high sensitivity with a detection limit of 2.5x10(-9) mol L(-1). MECC separation of the BPDE adduct, although less sensitive, provided an efficient enantioselective separation option.     

Separation and determination of β-casomorphins by using glass microfluidic chip electrophoresis together with laser-induced fluorescence detection

A simple, reliable and reproducible method for the separation and determination of five β-casomorphins (β-CMs, namely TPGN, PGPI, TPGI, TPGP and TPPG) based on glass microfluidic chip electrophoresis and laser-induced fluorescence detection is first described in here. The microfluidic chip electrophoresis and laser-induced fluorescence detection system consisted of a home-made glass "double-T" microchip and a simple LIF detector with excitation and emission wavelengths of 473 and 525 nm, respectively. Fluorescein isothiocyanate (FITC) was used as the precolumn derivatization reagent to label fluorophore on five β-CMs, and the optimum conditions of FITC-derivatization reaction and MCE separation were investigated in detail. Under optimum conditions, five β-CMs were completely separated and detected within 30 min with a detection limit of 18.7-75.1 nmol/L and an RSD (n=5) of 3.0-5.9%, respectively. The proposed method has been successfully used to detect β-CMs in real cheese sample with a recovery of 89-109%, suggesting that our method is sensitive and reliable. These features, as well as its low cost, operation convenience, stability and reusability, make it a promising alternative to β-CMs detection methods.     

A new sample preparation method compatible with capillary electrophoresis and laser-induced fluorescence for improving detection of low levels of β-lactoglobulin in infant foods

β-Lactoglobulin (βLG) is the main allergenic protein in cow's milk and can cause allergy even when present at very low concentration. The aim of this work is to develop an innovative sample preparation method fully compatible with capillary electrophoresis and laser-induced fluorescence detection for improving the sensitivity when analyzing βLG. Different types of baby food were on purpose contaminated with diverse dairy desserts and submitted to thermal treatment to simulate potential contamination at production. Sample preparation prior to CE analysis was performed by the classical extraction method and by the innovative one, and the results were compared. Analysis was performed by capillary electrophoresis with laser-induced fluorescence detection. The innovative method permitted to detect contaminations as low as 1 part of yoghurt in 10 000 parts of baby food.     

In-line solid-phase extraction–capillary electrophoresis coupled with mass spectrometry for determination of drugs of abuse in human urine

In-line solid-phase extraction–capillary electrophoresis coupled with mass spectrometric detection (SPE–CE–MS) has been used for determination of 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP), codeine (COD), hydrocodeine (HCOD), and 6-acetylmorphine (6AM) in urine. The preconcentration system consists of a small capillary filled with Oasis HLB sorbent and inserted into the inlet section of the electrophoresis capillary. The SPE–CE–MS experimental conditions were optimized as follows: the sample (adjusted to pH 6.0) was loaded at 930 mbar for 60 min, elution was performed with methanol at 50 mbar for 35 s, 60 mmol L⁻¹ ammonium acetate at pH 3.8 was used as running buffer, the separation voltage was 30 kV, and the sheath liquid at a flow rate of 5.0 μL min⁻¹ was isopropanol–water 50:50 (v/v) containing 0.5% acetic acid. Analysis of urine samples spiked with the four drugs and diluted 1:1 (v/v) was studied in the linear range 0.08–10 ng mL⁻¹. Detection limits (LODs) (S/N = 3) were between 0.013 and 0.210 ng mL⁻¹. Repeatability (expressed as relative standard deviation) was below 7.2%. The method developed enables simple and effective determination of these drugs of abuse in urine samples at the levels encountered in toxicology and doping.     

Sensitive and selective determination of glutathione in probiotic bacteria by capillary electrophoresis–laser induced fluorescence

Glutathione (GSH) is a thiol with an important function in protecting tissue against the oxidative stress which has been related to carcinogenesis in the colon. For this reason the development of probiotic species producing glutathione could be of great interest. To determine the glutathione content of some probiotic bacteria of the Bifidobacterium and Lactococcus genera, a very sensitive and selective analytical method based on capillary electrophoresis coupled to laser-induced fluorescence detection has been developed. Pretreatment of cell-lysate samples is very simple—precipitation of protein with acetonitrile in 1:2 volume ratio. The fluorophore 5-iodoacetamidofluorescein (5-IAF) was chosen for glutathione derivatisation; it reacts with thiols at pH 12.5, forming a fluorescent adduct which is excited by a laser at 488 nm for detection. The reaction conditions optimised were temperature, time, and 5-IAF/GSH molar ratio. Electrophoresis was performed with a carbonate buffer (25 mmol L⁻¹, pH 9.8) as background electrolyte and a voltage of 30 kV; an electrophoretic run was complete in less than 7 min. There was a good linear relationship between concentration and response in the range 2.5–500 ng mL⁻¹ and the LOD was 0.5 ng mL⁻¹. The glutathione content of probiotic cells was determined by using the standard additions method to reduce matrix effects. The method was fully validated and shown to be of suitable sensitivity and selectivity for determination of GSH in probiotic cell lysates.     

Quantification of γ-aminobutyric acid in the heads of houseflies (Musca domestica) and diamondback moths (Plutella xylostella (L.)), using capillary electrophoresis with laser-induced fluorescence detection

A novel method was developed for quantifying the levels of γ‐aminobutyric acid (GABA) in the heads of houseflies (Musca domestica) and diamondback moths (Plutella xylostella (L.)), using capillary electrophoresis with laser‐induced fluorescence detection (CE‐LIF). The GABA in sample was derivatized with 4‐chloro‐7‐nitro‐2,1,3‐benzoxadiazole (NBD‐Cl) prior to CE‐LIF analysis. In total, 32 mmol/L borate buffer, at pH 9.2 and containing 5.3 mmol/L β‐cyclodextrin (β‐CD) and 10.4 mmol/L sodium dodecyl sulfate (SDS), was determined to be the optimum CE background electrolyte (BGE) for GABA analysis. The detection limit of GABA was 0.016 μmol/L. The relative standard deviations (RSDs) of the migration time and peak area of GABA were 1.78 and 4.93%, respectively. The average recoveries of 0.97, 3.88, and 5.83 μmol/L of GABA, each added to the head sample of housefly, ranged from 88.9 to 110.5%. This method is simple and applicable to GABA assays of the heads of insects. With this newly developed CE‐LIF method, the amounts of GABA in the heads of houseflies (M. domestica) and diamondback moths (P. xylostella (L.)) were measured. The results are relevant to the understandings of some insecticides and insecticide‐resistance mechanisms in pests.     

Analysis of recombinant human erythropoietin glycopeptides by capillary electrophoresis electrospray–time of flight-mass spectrometry

Capillary electrophoresis electrospray–mass spectrometry was used to detect and characterize the great variety of O- and N-glycopeptide glycoforms of recombinant human erythropoietin (rhEPO) using an orthogonal accelerating time-of-flight mass spectrometer to obtain their exact molecular masses (CE–TOF-MS). rhEPO was digested with trypsin and Glu-C and analyzed by CE–TOF-MS to detect O₁₂₆, N₈₃, N₂₄–N₃₈ and N₂₄ and N₃₈ glycopeptide glycoforms, respectively. Neuraminidase was first used to enhance the detection of the glycopeptides and detect all possible glycoforms contained in each glycosylation site. O₁₂₆ and N₈₃ glycopeptides were extensively characterized. Twelve sialoforms corresponding to 5 different glycoforms were detected in N₈₃, and for the first time, a sulfated sialoform of this glycopeptide was also detected. In the case of O₁₂₆, different sialoforms with different types of sialic acids (Neu5Gc and Neu5Ac) were detected and an estimation of the relative percentage of Neu5Gc versus Neu5Ac was also carried out for this glycopeptide. N₂₄ and N₃₈ glycosylation sites were also characterized by CE–TOF-MS after Glu-C digestion and these results permitted to rule out some glycan combinations for N₂₄–N₃₈ glycopeptide glycoforms. This study provided a reliable glycopeptide map of rhEPO and may be regarded as an excellent starting point to analyze rhEPO glycopeptides in biological fluids and detect the use of this hormone in sports.     

Epigenotoxicity of environmental pollutants evaluated by a combination of DNA methylation inhibition and capillary electrophoresis–laser-induced fluorescence immunoassay

A variety of environmental pollutants may cause abnormal DNA methylation, which further disturb gene expression. In this work, we developed a rapid and sensitive method for the characterization and identification of the epigenotoxicity of environmental pollutants in terms of DNA methylation. The method combines in vitro inhibition reactions of a model DNA methyltransferase (DNMT) with rapid and sensitive capillary electrophoresis–laser-induced fluorescence (CE-LIF) immunoassays. This method was first assessed using two known DNMT inhibitors, (–)-epigallocatechin-3-gallate and RG108, and then applied to epigenotoxic evaluation of four aldehydes and six benzo-1,4-quinones. It was found that all these electrophilic chemicals could inhibit DNMT activity, probably due to their interactions with the active sites of DNMT. Interestingly, benzo-1,4-quinones displayed more inhibitory effects on DNMT activity than aldehydes. Among the tested six benzo-1,4-quinones, halogenated benzo-1,4-quinone showed higher inhibitory activity than non-halogenated p-benzo-1,4-quinone. Owing to its speed and sensitivity, our method will be potentially applicable for fast epigenotoxic screening of environmental pollutants and mechanistic study of environmental epigenetics.

Capillary electrophoresis with direct chemiluminescence detection for the analysis of catecholamines in human urine

A rapid and sensitive method for the analysis of three catecholamines by capillary electrophoresis(CE)with directchemiluminescence(CL)detection is described.The detection limits(S/N=3)were 1.3*10-8g/mL for isoprenaline,1.0*10-8g/mL for epinephrine and 2.8*10-8g/mL for dopamine.The proposed method was successfully applied to theanalysis of catecholamines in urine samples of cigarette smokers and nonsmokers.The results showed that there is a close relationbetween the release of dopamine in human body fluids and cigarette smoking/nonsmoking.     

Speciation studies by capillary electrophoresis – simultaneous determination of iodide and iodate in seawater

A capillary electrophoresis (CE) method was developed for the simple and highly-sensitive determination of iodine species in seawater. The proposed method is based on the on-capillary preconcentration of iodide and iodate using the principle of transient isotachophoresis (tITP) stacking, and direct UV detection of the separated species at 226 and 210 nm, respectively. The preconcentration procedure takes advantage of the electrokinetic introduction of the terminating ion [2-(N-morpholino)ethanesulfonate (MES)] into the capillary, that enables a longer tITP state. The appropriate conditions for the tITP step were optimized by varying the MES and sample injection time and the concentration of cetyltrimethylammonium chloride (CTAC). The latter component of the separation electrolyte (SE) was shown to strongly affect the migration and therefore the enrichment of iodide due to specific ion-association. The optimized separations were performed in 12.5 mM CTAC, 0.5 M NaCl (pH 2.4). Valid calibration is demonstrated in the range 3–60 g L^–1 iodide (R=0.9992) and 40–800 g L^–1 iodate (R=0.9994). The detection limits achieved were 0.23 g L^–1 (2 nM) for iodide and 10 g L^–1 (57 nM) for iodate. Such sensitivity and linearity thresholds allowed the reported tITP-CE system to be applied to direct speciation analysis of surface and seabed seawater. The comparison of CE results with those of an ion-chromatography (IC) technique proved that the method has acceptable accuracy.     

Steroselective determination of trihexyphenidyl using carboxylmethyl-β-cyclodextrin by capillary electrophoresis with field-amplified sample stacking

A simple, sensitive and low-cost method using capillary electrophoresis coupled with field-amplified sample stacking (FASS) technique has been developed for enantioselective separation and quantification of trihexyphenidyl (THP) enantiomers in human serum. In this work, three kinds of modified β-cyclodextrin were tested as chiral selectors in CE. Among the CDs studied, THP enantiomers could only be separated by carboxylmethyl-β-cyclodextrin (CM-β-CD). A systematic study of the parameters (CD concentration and pH value in CE buffer, separation voltage and temperature, composition of sample solvent, injection voltage and time) affecting chiral separation and on-line concentration of THP enantiomers were investigated and optimized. The optimum FASS method provided a sensitivity enhancement of about 490-fold compared with usual hydrodynamic injection. Limits of detection for each enantiomer were in the low ng ml^− 1 concentration range (0.92 ng ml^− 1 or 3.06 nM). The quantification of each THP enantiomer in human serum was performed after serum sample extraction. To validate this CE-FASS method, linear regression analysis, intra and inter-day precision and recovery were determined with satisfying results.     

Histamine determination in human urine using sub-2 μm C18 column with fluorescence and mass spectrometric detection

A fast, sensitive, and selective method for the determination of histamine in human urine samples by ultrahigh pressure liquid chromatography (LC) with fluorescence and mass spectrometry (MS) detection is investigated. A fluorescent reagent, 4-(1-pyrene) butyric acid N-hydroxysuccinimide ester was conjugated to the primary and secondary amino moieties of histamine. The structure of dipyrene-labeled histamine in human urine was determined by quadrupole time-of-flight MS with electospray ionization interface. The determination of the dipyrene derivative of histamine in urine samples was achieved within 3.9 min on an ultrahigh pressure LC Eclipse Zorbax XDB-C(18) column with 1.8 μm particle diameter. In this work, histamine separation was achieved significantly faster (3.9 min) with improved detection limit (signal-to-noise = 3) of 0.04 nM than 19.5 min with a detection limit of 0.183 nM as reported in a previous method.     

Separation of chiral basic drugs with sulfobutyl-β-cyclodextrin in capillary electrophoresis

Summary Separation of the enantiomers of 22 chiral basic drugs not previously separated with sulfobutyl-β-cyclodextrin (SBE-β-CD) as a chiral selector has been investigated by capillary zone electrophoresis. By dissolving the drug in Britton-Robinson buffer then optimization of selector concentration, pH, and amount injected, the enantiomers of 19 drugs were successfully separated, two for the first time.     

Analysis of recombinant human erythropoietin and novel erythropoiesis stimulating protein digests by immunoaffinity capillary electrophoresis–mass spectrometry

In this work, we demonstrate that detection of a specific peptide marker by immunoaffinity capillary electrophoresis–mass spectrometry (IA-CE–MS) could be used to confirm the presence of recombinant human erythropoietin (rhEPO) in solution. Besides the carbohydrate content, the amino acid sequence of novel erythropoiesis stimulating protein (NESP) differs from human erythropoietin (hEPO) at five positions (Ala30Asn, His32Thr, Pro87Val, Trp88Asn, and Pro90Thr). After digesting both glycoproteins in solution by trypsin and PNGase F, two specific proteotypic peptides, EPO (77–97) and NESP (77–97) which differ in three amino acids, were selected as rhEPO and NESP markers, respectively. Both digests and their mixtures were analyzed by IA-CE–MS. The IA stationary phase was prepared from a custom made polyclonal anti-EPO (81–95) antibody immobilized on a solid support of CNBr-Sepharose 4B and was packed in a microcartridge near the inlet of the separation capillary. As the antibody was directed to a synthetic peptide EPO (81–95), only the proteotypic peptide EPO (77–97) was retained. The retained peptide was eluted, separated by electrophoresis and detected by MS. The method was specific to confirm the presence of rhEPO in solution. Although the limits of detection for the peptide marker were similar to those obtained with CE–MS (a few mg/L), these results show the potential of this novel approach to detect in the future rhEPO and its analogues selectively and unambiguously at the levels expected in biological fluids.     

Multiresidue determination of chlorophenoxy acid herbicides in human urine samples by use of solid-phase extraction and capillary LC–UV detection

Chlorophenoxy acid herbicides are intensively applied to get rid of unwanted plants because of their low cost and selectivity. Due to their toxicity, which depends on their chemical form, the European Community has established legal directives to restrict their use and to control their maximum residue levels in several matrices. Determination of chlorophenoxy acids—2,4-dichlorophenoxyacetic acid (2,4-D), 4-chloro-2-methylphenoxyacetic acid (MCPA), 2-(2,4-dichlorophenoxy)propanoic acid (2,4-DP), 2-(4-chloro-2-methylphenoxy)propanoic acid (MCPP), 4-(4-chloro-2-methylphenoxy)butanoic acid (MCPB) and 2-(2,4,5-trichlorophenoxy)propanoic acid (2,4,5-TP) in spiked human urine samples has been carried out by capillary LC, after solid-phase extraction on a column packed with silica C₁₈ restricted-access material. Chromatographic analysis was performed in gradient-elution mode at 25 °C, with injection of 20 μL low-organic-solvent composition herbicide solutions for focusing purposes on the head of the capillary column, and diode array detection at 232 nm. Urine samples collected during 24 h from healthy and unexposed volunteers were spiked in the concentration range 25–150 μg L⁻¹; recoveries obtained were between 66 and 100% (n = 6 for each spiked level) and RSDs (relative standard deviations) were between 1 and 5%. Detection limits in the urine samples from volunteers were between 3.5 and 6.0 μg L⁻¹. The developed methodology has allowed the clean-up and preconcentration of low volumes of untreated human urine without previous treatment, showing the effectiveness of the employed SPE sorbent for extracting the target analytes and ultimately resulting in the reduction of the sample-preparation time.     

Highly sensitive and selective DNA-based detection of mercury(II) with α-hemolysin nanopore

The duplex formation mediated by Hg(2+) in a properly designed ssDNA generates a stable hairpin structure, which greatly alters the translocation profile of the ssDNA through α-hemolysin nanopore. From the 2D-events contour plot, the presence of Hg(2+) can be confirmed in as little as 30 min at ～7 nM or higher. The sensor is highly selective to Hg(2+), without interference from other metal ions. It can be fabricated from readily available materials, without the processes of synthesis, purification, probe-making, and so forth. This sensing strategy opens new possibilities for detecting many types of analytes which have specific interactions with DNA molecules.     

Comparison of μm and mm sized disk electrodes for end-column electrochemical detection in capillary electrophoresis

End-column electrochemical detection based on either the use of a 25 μm microdisk electrode or a 0.5 mm macrodisk electrode has been compared with respect to performance and influence on non-aqueous capillary electrophoretic separations. Despite the much higher coulometric efficiency obtained with the larger disk electrode, the microdisk electrode configuration offers comparable limits of detection (LOD) for the neutral and positively charged ferrocene compounds employed in conjunction with a non-aqueous acetonitrile-based buffer. The LODs for ferrocene were found to be 4.0 × 10^–8 M and 6.7 × 10^–8 M for the microdisk and macrodisk detector, respectively. In addition, both detector arrangements showed different relative responses for neutral and positively charged analytes. The macroelectrode-based detector introduced additional zone broadening while this was not found to be the case with the microelectrode arrangement. Using the microelectrode detector, the band broadening in an electro-osmotically driven flow system was compared to that in a gravity flow-based system. It was demonstrated that the zone broadening under gravity flow conditions was approximately twice as large as under electro-osmotic flow conditions for a typical set of experimental parameters.     

Comparison of μm and mm sized disk electrodes for end-column electrochemical detection in capillary electrophoresis

End-column electrochemical detection based on either the use of a 25 μm microdisk electrode or a 0.5 mm macrodisk electrode has been compared with respect to performance and influence on non-aqueous capillary electrophoretic separations. Despite the much higher coulometric efficiency obtained with the larger disk electrode, the microdisk electrode configuration offers comparable limits of detection (LOD) for the neutral and positively charged ferrocene compounds employed in conjunction with a non-aqueous acetonitrile-based buffer. The LODs for ferrocene were found to be 4.0 × 10^–8 M and 6.7 × 10^–8 M for the microdisk and macrodisk detector, respectively. In addition, both detector arrangements showed different relative responses for neutral and positively charged analytes. The macroelectrode-based detector introduced additional zone broadening while this was not found to be the case with the microelectrode arrangement. Using the microelectrode detector, the band broadening in an electro-osmotically driven flow system was compared to that in a gravity flow-based system. It was demonstrated that the zone broadening under gravity flow conditions was approximately twice as large as under electro-osmotic flow conditions for a typical set of experimental parameters. Received: 1 June 1998 / Revised: 20 August 1998 / Accepted: 24 August 1998     

Development of ion chromatography and capillary electrophoresis methods for the determination of Li in Li–Al alloy

Two methods were developed for determination Li content in Li–Al alloy by employing ion chromatography (IC) and capillary electrophoresis (CE) without any prior separation of Al matrix. In absence of suitable certified reference material the two methods were used to validate each other. Using a high capacity column and a weaker eluent methane sulphonic acid, it was possible to separate Li in IC without eluting strongly retained Al. The method showed good precision and sensitivity and was extended for analysis of routine samples. In the case of CE using imidazole as co-ion, Li was detected in CE by indirect detection. In view of no interference from Al, samples were analyzed without any matrix separation. The CE method was used successfully for sample analysis and results were compared with IC results.     

Strong complexation of water-soluble betulin derivatives with (2-hydroxypropyl)-γ-cyclodextrin studied by affinity capillary electrophoresis

The complexation between (2-hydroxypropyl)-γ-cyclodextrin (HP-γ-CD) and water-soluble betulin derivatives, betulin 3,28-disulfate (DSB) and betulin 3-acetate-28-sulfate (ASB), belonging to the class of pentacyclic lupane triterpenoids, was studied using mobility shift ACE (ms ACE). It was found that the complexation is a high-affinity interaction. In this case, a very low amount of HP-γ-CD should be added to the BGE, and triangular peaks are observed as a result of ligand deficiency in the sample zone. Le Saux et al. showed in 2005 that using the parameter a₁ of the Haarhoff-Van der Linde (HVL) function instead of the migration time measured at the peak apex eliminates the effect of ligand deficiency on effective electrophoretic mobility. Therefore, the electrophoretic mobilities of asymmetrical peaks of DSB and ASB were calculated in this way. The obtained experimental data correspond to 1:1 complexes. The calculated values of binding constants logarithms at 25°C are 6.70 ± 0.05 and 7.03 ± 0.10 for the HP-γ-CD complexes of DSB and ASB, respectively.