Synthesis and reactivity of trans-Tricyclo

The first synthesis of trans-tricyclo[4.2.0.0(1,3)]oct-4-ene (1), an ethenyl bridged spirohexane, was accomplished in four steps starting from Carpino et al. gem-dichloro ketone 6. An X-ray crystal structure of 1 with one substituent was obtained to provide geometry data on this novel ring system and to confirm the stereochemical assignment of the penultimate synthetic intermediate. Tricyclo[4.2.0. 0(1,3)]oct-4-ene is surprisingly stable. It reacts with glacial acetic acid but only slowly at 145 degrees C; the products were isolated and identified. A unimolecular rearrangement takes place at elevated temperatures (165 degrees C and higher), presumably, via a biradical intermediate to afford tricyclo[4.2.0.0(1,5)]oct-3-ene (23). The structure of this 1,5-bridged bicyclo[2.1.0]pentane derivative was established by NMR and an X-ray crystal structure of its Diels-Alder adduct with isobenzofuran. Tricyclo[4.2.0.0(1, 3)]oct-4-ene equilibrates with 23, so equilibrium constants and reaction rates were measured over a 20 degrees C temperature range from 180 degrees C to 200 degrees C. The difference in the heats of formation (DeltaDeltaH degrees (f) (23 - 1)) is -2.1 kcal/mol, which is in good agreement with ab initio (HF and MP2) calculations using the 6-31G(d) basis set (-1.9 (HF) and -1.4 (MP2) kcal/mol). Computations on trans-tricyclo[4.2.0.0(1,3)]octane and spirohexane also were carried out, and the structures and energies were compared.     

The deceptive rearrangement of a C8H9 cation of the cage type

We produce evidence to show that the acetolysis of exo-seco-cubyl mesylate gives 7-tetracyclo[3.3.0.0^2,8,0^3,6]octyl acetate as sole product and not 5-tetracyclo[4.2.0.0^2,40^3,8]-octyl acetate.     

Monooxygenase stereoselectivity in the biosynthesis of stereoisomeric spiroacetals in the cucumber fly,Bactrocera cucumis

[reaction: see text] The stereoselectivity of hydroxylation of alkyltetrahydropyran-2-ols (or their biological equivalents) in the formation of stereoisomers of 2,8-dimethyl-1,7-dioxaspiro[5.5]undecanes in male Bactrocera cucumis has been investigated. Racemic, (6R)-, and (6S)-6-methyl-2-[5-(2)H(1)]-n-pentyltetrahydropyran-2-ol was administered under an [(18)O(2)]-enriched atmosphere. The stereochemistry and isotopic composition of generated spiroacetals were monitored by combined enantioselective GC-MS. The monooxygenase(s) strongly prefers the (6S)-substrate and furnishes predominantly the (S)-alcohol and then the (2S,6R,8S)-2,8-dimethyl-1,7-dioxaspiro[5.5]undecane. The (2S,6S,8R) and (2R,6S,8S) (E,Z)-isomers appear to be derived in vivo predominantly from (R)-hydroxylation of the (6S)-tetrahydropyranol.     

Aza-cope rearrangement-mannich cyclizations for the formation of complex tricyclic amines: stereocontrolled total synthesis of (+/-)-gelsemine

A detailed examination of the use of aza-Cope rearrangement-Mannich cyclization sequences for assembling the azatricyclo[4.4.0.0(2,8)]decane core of gelsemine is described. Iminium ions and N-acyloxyiminium ions derived from endo-oriented 1-methoxy- or 1-hydroxybicyclo[2.2.2]oct-5-enylamines do not undergo the first step of this sequence, cationic aza-Cope rearrangement, to form cis-hydroisoquinolinium ions. However, the analogous base-promoted oxy-aza-Cope rearrangement does take place to form cis-hydroisoquinolones containing functionality that allows iminium ions or N-acyloxyiminium ions to be generated regioselectively in a subsequent step. Mannich cyclization of cis-hydroisoquinolones prepared in this way efficiently assembles the azatricyclo[4.4.0.0(2,8)]decane unit of gelsemine. Using a sequential base-promoted oxy-aza-Cope rearrangement/Mannich cyclization sequence, gram quantities of azatricyclo[4.4.0.0(2,8)]decanone 18, a central intermediate in our total of (+/-)-gelsemine, were prepared from 3-methylanisole in 12 steps and 16% overall yield.     

A study into the possible homoaromatic nature of some related carbene and cationic intermediates with the potential for transannular interaction

A comparison of the aromatic nature of the cations and carbenes centered at the 8-position of tricyclo[3.2.1.0(2,4)]octane, the 9-position of pentacyclo[4.3.0.0(2,4).0(3,8).0(5,7)]nonane, the 6-position of tricyclo[3.1.1.0(2,4)]heptane, and the 4-position of tetracyclo[3.3.0.0(2,8).0(3,6)]octane has been undertaken. Hybrid density functional theory calculations have been used to examine the geometric, energetic, and magnetic characteristics of each cation, singlet carbene, and triplet carbene. The results shed light on the flexibility of the polycycles to achieve stable intermediates and on the breadth of homoaromaticity.     

Hydrogenolysis of cubane

On catalytic hydrogenation over Pd-C under normal conditions cubane (10) takes up 3 mol of hydrogen in a few hours. Bicyclo[2.2.2] octane (13) is formed as the main product, and tetracyclo[4.2.0.0^2,5.0^3,8]octane (11, secocubane) and tricyclo[4.2.0.0^2,5]octane (12,nortwistbrendane) have been identified as intermediates. The hydrogenolysis of dimethyl 1,4-cubane dicarboxylate, as well as cuneane derivatives, have also been studied. Results are discussed in terms of strain relief calculated by the molecular mechanics method for cubane-like structures.     

Synthesis of 1,4-annulated cyclooctatetraenophanes based on a novel cubane building block approach

A general synthetic approach to strained 1,4-annulated cyclooctatetraene-based cyclophanes is described. A key feature in this approach is exploitation of the cubane core as a masked cyclooctatetraene synthon. Thus, 1,4-disubstituted cubanes 3 and 4 used as precursors to cyclooctatetraenophanes have been prepared in four steps from the readily available 1,4-cubanedicarboxaldehyde (5). The synthesis of 3 was effected by palladium/copper-mediated coupling of 1,4-bis[(Z,Z)-2-iodovinyl]cubane (6) and 1,4-bis[(Z,Z)-but-1-en-3-ynyl]cubane (8). For the synthesis of 4, on the other hand, modified Eglington-Glaser coupling was applied for the macrocyclization step. The general characteristic of Rh(I) to induce [2 + 2] cycloreversion of the cubane core to syn-tricyclo[4.2.0.0(2,5)]octa-3,7-diene followed by thermal rearrangement to cyclooctatetraene was applied as a key structural transformation toward targeted cyclooctatetraenophanes 1 and 2.     

Revision of the absolute configuration of the tricyclic sesquiterpene (+)-kelsoene by chemical correlation and enantiospecific total synthesis of its enantiomer

The absolute configuration of the recently identified sesquiterpene (+)-kelsoene was revised by chemical correlation with (R)-(+)-pulegone; the correct structure is (1R,2S,5R,6R,7R,8S)-2,8-dimethyl-6-(1-methylethenyl)tricyclo[5.3.0.0 (2,5)]decane.     

Interaction of closo-decaborate anion B10H 10 2− with iminium salts

The interaction of closo-decaborate anions with iminium salts, either formed in situ or introduced into the reaction as individual compounds, has been studied. The reaction leads to products with an exopolyhedral boron-nitrogen bond. The formation of compounds with exopolyhedral boron-chlorine and boron-carbon bonds is also possible. The crystal structures of [NMe₂(CH₂Cl)]₂B₁₀H₈ and 3-CH₃-2,8-[NMe₂(CH₂Cl)]₂-7-ClB₁₀H₆ have been studied.     

Cubane, cuneane, and their carboxylates: a calorimetric, crystallographic, calculational, and conceptual coinvestigation

[reaction: see text] This study is a multinational, multidisciplinary contribution to the thermochemistry of dimethyl1,4-cubanedicarboxylate and the corresponding isomeric, cuneane derivative and provides both structural and thermochemical information regarding the rearrangement of dimethyl 1,4-cubanedicarboxylate to dimethyl 2,6-cuneanedicarboxylate. The enthalpies of formation in the condensed phase at T = 298.15 K of dimethyl 1,4-cubanedicarboxylate (dimethyl pentacyclo[4.2.0.0.(2,5)0.(3,8)0(4,7)]octane-1,4-dicarboxylate) and dimethyl 2,6-cuneanedicarboxylate (dimethyl pentacyclo[3.3.0.0.(2,4)0.(3,7)0(6,8)]octane-2,6-dicarboxylate) have been determined by combustion calorimetry, delta(f) H(o)m (cr)/kJ x mol(-1) = -232.62 +/- 5.84 and -413.02 +/- 5.16, respectively. The enthalpies of sublimation have been evaluated by combining vaporization enthalpies evaluated by correlation-gas chromatography and fusion enthalpies measured by differential scanning calorimetry and adjusted to T = 298.15 K, delta(cr) (g)Hm (298.15 K)/kJ x mol(-1) = 117.2 +/- 3.9 and 106.8 +/- 3.0, respectively. Combination of these two enthalpies resulted in delta(f) H(o)m (g., 298.15 K)/kJ x mol(-1) of -115.4 +/- 7.0 for dimethyl 1,4-cubanedicarboxylate and -306.2 +/- 6.0 for dimethyl 2,6-cuneanedicarboxylate. These measurements, accompanied by quantum chemical calculations, resulted in values of delta(f) Hm (g, 298.15 K) = 613.0 +/- 9.5 kJ x mol(-1) for cubane and 436.4 +/- 8.8 kJ x mol(-1) for cuneane. From these enthalpies of formation, strain enthalpies of 681.0 +/- 9.8 and 504.4 +/- 9.1 kJ x mol(-1) were calculated for cubane and cuneane by means of isodesmic reactions, respectively. Crystals of dimethyl 2,6-cuneanedicarboxylate are disordered; the substitution pattern and structure have been confirmed by determination of the X-ray crystal structure of the corresponding diacid.     

Promotion of phosphaalkyne cyclooligomerisation by a Sb(v) to Sb(iii) redox process

A high yield of the tetraphosphaladderene, anti-tetraphosphatricyclo[4.2.0.0(2,5)]octa-3,7-diene, is obtained from reaction of the zirconocene 1,3-diphosphabicyclo[1.1.0]butane with Ph(2)SbCl(3) in THF or CH(2)Cl(2). Exploration of the reaction pathway using density functional theory suggests that an envelope-type adduct of Ph(2)SbCl and 1,3-diphosphabicyclo[1.1.0]butane plays a pivotal role in the reaction. The zwitterionic character of this intermediate species allows it to act simultaneously as both an ene and an eneophile, and a symmetry-allowed bimolecular reaction leads to the tetraphosphaladderene species via a spirocyclic intermediate.     

The radical cation of syn-tricyclooctadiene and its rearrangement products

The syn dimer of cyclobutadiene (tricyclo[4.2.0.0(2.5)]octa-3,7-diene, TOD) is subjected to ionization under different conditions and the resulting species are probed by optical and ESR spectroscopy. By means of quantum chemical modelling of the potential energy surfaces and the optical spectra, it is possible to assign the different products that arise spontaneously after ionization or after subsequent warming or illumination of the samples. Based on these findings, we propose a mechanistic scheme which involves a partitioning of the incipient radical cation of TOD between two electronic states. These two states engage in (near) activation-less decay to the more stable valence isomers, cyclooctatetraene (COT*+) and a bis-cyclobutenylium radical cation BCB*+. The latter product undergoes further rearrangement, first to tetracyclo[4.2.0.0(2,4).0(3,5]oct-7-ene (TCO*+) and eventually to bicyclo[4.2.0]octa-2,4,7-triene (BOT*+) which can also be generated photochemically from BCB*+ or TCO*+. The surprising departure of syn-TOD*+ from the least-motion reaction path leading to BOT*+ can be traced to strong vibronic interactions (second-order Jahn-Teller effects) which prevail in both possible ground states of syn-TOD*+. Such effects seem to be more important in determining the intramolecular reactivity of radical cations than orbital or state symmetry rules.     

Bicyclo[3.2.1]octane and 6-oxabicyclo[3.2.2]nonane type neolignans from Magnolia denudata

From the ethyl acetate soluble fraction of twigs of Magnolia denudata (Magnoliaceae), seven new neolignan derivatives, 1-7, were isolated along with eighteen known lignan and neolignan derivatives, 8-25. The structures of the new neolignans were elucidated by means of spectral methods, especially by 1H-NMR and 13C-NMR spectra, and two dimensional NMR methods such as 1H-detected heteronuculear multiple bond connectivity1 (HMBC), 1H-detected multiple quantum coherence (HMQC) and 1H-1H-correlation spectroscopy (COSY). Compounds 1-4 have novel structures possessing a 6-oxabicyclo[3.2.2]nonane skeleton and compounds 5-8 also have novel structures possessing a bicyclo[3.2.1]octane skeleton. The anti-platelet-activating factor (PAF) activity of these compounds was tested by measurement of inhibition activity against acetyl transferase to lyso-PAF.     

Synthetic,structural and binding studies of the 4,6-dimethyldibenzothiophene complex [(eta(5)-C(5)Me(5))Ru(CO)(2)(eta(1)(S)-4,6-Me(2)DBT)]BF(4): toward an understanding of deep hydrodesulfurization

The synthesis of the first completely characterized transition-metal complex containing a sulfur-bound 4,6-dimethyldibenzothiophene (4,6-Me(2)DBT) ligand, [CpRu(CO)(2)(eta(1)(S)-4,6-Me(2)DBT)]BF(4) (1) (Cp = eta(5)-C(5)Me(5)), is reported. X-ray studies of 1 and its 4-methyldibenzothiophene and dibenzothiophene analogues, [CpRu(CO)(2)(eta(1)(S)-4-MeDBT)]BF(4) (2) and [CpRu(CO)(2)(eta(1)(S)-DBT)]BF(4) (3), show that the Ru-S bond distances increase in the order, 3 < 2 < 1. Equilibrium studies on the series of [CpRu(CO)(2)(eta(1)(S)-DBTh)](+) compounds, where DBTh = DBT, 4-MeDBT, 4,6-Me(2)DBT, and 2,8-Me(2)DBT, show that the relative binding strengths of the dibenzothiophene ligands increase in the order 4,6-Me(2)DBT (1) < 4-MeDBT (20.2(1)) < DBT (62.7(6)) < 2,8-Me(2)DBT (223(3)). These results are the first to quantify the steric effect of 4- and 6-methyl groups on the sulfur-coordinating ability of dibenzothiophenes to transition-metal centers. They are also consistent with the proposal that 4- and 6-methyl groups reduce the coordination of dibenzothiophenes to active metal sites on hydrodesulfurization catalysts, which could account for the slow rate of 4-MeDBT and 4,6-Me(2)DBT hydrodesulfurization in petroleum feedstocks.     

Gold(I)-catalyzed cycloisomerization of alkynyl hydroxyallyl tosylamides to 4-oxa-6-azatricyclo[3.3.0.0(2,8)]octanes

Reaction of alkyne allyl alcohols tethered with N-(p-tolylsulfonamide) in the presence of a cationic gold(I) catalyst gave new cycloisomerization products, 4-oxa-6-azatricyclo[3.3.0.0(2,8)]octanes.     

Reactions of sterically congested 1,5-hexadienes: Ab initio and DFT calculations on the competition between cope rearrangements and disrotatory cyclobutene ring-opening reactions of bridged syn-tricyclo[4.2.0.0(2,5)]octa-3,7-dienes

The thermolytic behavior of four syn-tricyclo[4.2.0.0(2,5)]octa-3,7-dienes, each spanned by four propano bridges (13, 14, 21, and 26), has been investigated by means of calculations at the UB3LYP/ 6-31G* and CASPT2/6-31G levels. These calculations predict that 13 should undergo a degenerate Cope rearrangement (E(A) = 19.6 kcal/mol), whereas the other three C(20)H(24) isomers should prefer a necessarily disrotatory cyclobutene ring-opening reaction. In the case of 14, the ring-opening reaction (E(A) = 27.2 kcal/mol) is concerted and leads directly to 15, a 4-fold bridged cyclooctatetraene. In the ring opening of 21, the 1,6-bridge in the 4-fold bridged bicyclo[4.2.0]octa-2,4,7-triene 31 prevents formation of the corresponding cyclooctatetraene. In the ring opening of 26, the 4-fold bridged bicyclo[4.2.0]octa-2,4,7-triene derivative 36 is predicted to form the corresponding bridged cyclooctatetraene 38, which should undergo bond shift. The results of these calculations are found to be in very good agreement with the results of experiments on these hydrocarbons.     

(18)O]-oxygen incorporation reveals novel pathways in spiroacetal biosynthesis by Bactrocera cacuminata and B. cucumis

The origins of the oxygen atoms in 1,7-dioxaspiro[5.5]undecane (1) and hydroxyspiroacetal (2) from Bactrocera cacuminata, and in 2,8-dimethyl-1,7-dioxaspiro[5.5]undecane (3) and hydroxyspiroacetal (4) from B. cucumis, have been investigated by incorporation studies from both [(18)O(2)]-dioxygen and [(18)O]-water. Combined GC-MS examination and high-field NMR analysis have demonstrated that all oxygen atoms in 1 and 2 from B. cacuminata are dioxygen derived, but in contrast, the spiroacetals 3 and 4 from B. cucumis incorporate one ring oxygen from water and one ring oxygen (and the hydroxyl oxygen in 4) from [(18)O(2)]-dioxygen. These results reveal not only the generality of monoxygenase mediation of spiroacetal formation in Bactrocera sp., but also an unexpected complexity in their biosynthesis. A general paradigm accommodating these and other observations is presented.     

Propella[34] prismane and its congeners: A MO-theoretical study

The geometries of a fourfold bridged tricyclo[4.2.0.0^2,5]octa-3,7-diene ( 1 ) and its photoproducts 2 and 3 were calculated by Hartree-Fock ab initio (3-21G and DZP basis) and semiempirical (MNDO, AM1, MINDO /3) methods. It was found that due to the smaller distance between the double bonds in 1 (2.65 Å) as compared to the parent tricyclo[4.2.0.0^2,5]octa-3,7-diene ( 4 ) (2.91 Å), the sequence of the frontier orbitals is different. In the case of 1 , the photochemical [2 + 2]cycloaddition is allowed, whereas in 4 it is forbidden. © 1995 by John Wiley & Sons, Inc.     

Tuning the selectivity/specificity of fluorescent metal ion sensors based on N2S2 pyridine-containing macrocyclic ligands by changing the fluorogenic subunit: spectrofluorimetric and metal ion binding studies

Two new fluorescent chemosensors for metal ions have been synthesized and characterized, and their photophysical properties have been explored; they are the macrocycles 5-(2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane (L5) and 5-(5-chloro-8-hydroxyquinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane (L6). Both systems have a pyridyl-thioether-containing 12-membered macrocycle as a binding site. The coordination properties of these two ligands toward CuII, ZnII, CdII, HgII, and PbII have been studied in MeCN/H2O (1:1 v/v) and MeCN solutions and in the solid state. The stoichiometry of the species formed at 25 degrees C have been determined from absorption, fluorescence, and potentiometric titrations. The complexes [CuL5](ClO4)(2).1/2MeCN, [ZnL5(H2O)](ClO4)2, [HgL5(MeCN)](ClO4)2, [PbL5(ClO4)2], [Cu3(5-Cl-8-HDQH-1)(L6H-1)2](ClO4)(3).7.5H2O (HDQ=hydroxyquinoline), and [Cu(L6)2](BF4)(2).2MeNO2 have also been characterized by X-ray crystallography. A specific CHEF-type response of L5 and L6 to the presence of ZnII and CdII, respectively, has been observed at about pH 7.0 in MeCN/H2O (1:1 v/v) solutions.     

Synthesis, structure and magnetic properties of oligometallic systems derived from di- and trinuclear copper(II) amido-oximate complexes

Three heterometallic complexes [M(H(2)O)(n)][Cu(3)L(2)(H(2)O)] (M = Mn(2+), Co(2+) or Ba(2+)) and one dinuclear compound (CuDien)(CuL{H(2)O}) were prepared by interaction of anionic compounds Cu(3)L(2)(2-) or CuL(2-) with the corresponding cations (H(4)L = 1,9-dicyano-1,9-bis(hydroximino)-3,7-diazanonane-2,8-dione; Dien = 1,5-diamino-3-azapentane). The complexes [M(H(2)O)(n)][Cu(3)L(2)(H(2)O)] have a polymeric structure, formed via oligomerization of Cu(3)L(2)(2-) units and additionally, in the case of the Ba-salt, by binding of Cu(3)L(2)(2-) units through Ba(2+). Antiferromagnetic interactions occur in all the complexes, while for [Co(H(2)O)(6)][Cu(3)L(2)(H(2)O)] there is evidence of some ferromagnetic ordering at low temperatures. The values of J are lower in magnitude than for similar, previously reported systems, which is attributed to the electron-withdrawing effect of the ligand cyano groups.