Boronic Acid Functionalized Core–Shell Polymer Nanoparticles Prepared by Distillation Precipitation Polymerization for Glycopeptide Enrichment

The boronic acid‐functionalized core–shell polymer nanoparticles, poly(N,N‐methylenebisacrylamide‐co‐methacrylic acid)@4‐vinylphenylboronic acid (poly(MBA‐co‐MAA)@VPBA), were successfully synthesized for enriching glycosylated peptides. Such nanoparticles were composed of a hydrophilic polymer core prepared by distillation precipitation polymerization (DPP) and a boronic acid‐functionalized shell designed for capturing glycopeptides. Owing to the relatively large amount of residual vinyl groups introduced by DPP on the core surface, the VPBA monomer was coated with high efficiency, working as the shell. Moreover, the overall polymerization route, especially the use of DPP, made the synthesis of nanoparticles facile and time‐saving. With the poly(MBA‐co‐MAA)@VPBA nanoparticles, 18 glycopeptides from horseradish peroxidase (HRP) digest were captured and identified by MALDI‐TOF mass spectrometric analysis, relative to eight glycopeptides enriched by using commercially available meta‐aminophenylboronic acid agarose under the same conditions. When the concentration of the HRP digest was decreased to as low as 5 nmol, glycopeptides could still be selectively isolated by the prepared nanoparticles. Our results demonstrated that the synthetic poly(MBA‐co‐MAA)@VPBA nanoparticles might be a promising selective enrichment material for glycoproteome analysis.     

Facile Synthesis of Boronic Acid‐Functionalized Magnetic Mesoporous Silica Nanocomposites for Highly Specific Enrichment of Glycopeptides

In the work, aminophenylboronic acid (APB)‐functionalized magnetic mesoporous silica, which holds the attractive features of high magnetic responsivity and large surface area, was developed to enrich glycopeptides. At first, magnetic mesoporous silica nanocomposites were prepared. And then, the nanocomposites were functioned with glycidoxypropyltrimethoxysilane (GLYMO) for boronic acid immobilization. Due to that the boronic acid group on the surface of magnetic mesoporous silica nanocomposites can form tight yet reversible covalent bond with glycopeptides containing cis‐1,2‐diols groups, the magnetic mesoporous silica nanocomposites were successfully applied to selective enrichment of glycopeptides. APB functionalized magnetic mesoporous silica was also demonstrated to have high selectivity for the glycopeptides in the presence of a 10‐fold excess bovine serum albumin (BSA) over horseradish peroxidase (HRP) in the tryptic digest. We also find that magnetic mesoporous silica has better sensitivity in HRP digest compared with that of commercial aminophenylboronic acid‐functionalized magnetic nanoparticles beads. The limit of detection for glycopeptides from glycoprotein HRP is about 0.01 ng/µL.     

Off-line hyphenation of boronate affinity monolith-based extraction with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for efficient analysis of glycoproteins/glycopeptides

Boronate affinity materials have attracted increasing attentions as sample enrichment platforms for glycoproteomic analysis in recent years. However, most of the boronate affinity materials that have already employed for proteomic analysis are suffering from apparent disadvantages, such as alkaline pH for binding, weak affinity, and relatively poor selectivity. Benzoboroxoles are a unique class of boronic acids which have showed excellent binding properties for the recognition of cis-diol-containing compounds. Recently, a 3-carboxy-benzoboroxole-functionalized monolithic column had been reported and it had exhibited the best selectivity and affinity as well as the lowest binding pH among all reported boronate affinity monolithic columns. In this study, an off-line hyphenation of this boronate affinity monolithic column-based extraction with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) was developed and the powerfulness of this hyphenated approach in the analysis of glycoproteins and glycopeptides in complex samples was investigated. The approach was first applied to the analysis of glycopeptides in the tryptic digest of horseradish peroxidase (HRP). Totally 22 glycopeptides were identified. To the best of our knowledge, this is the best performance among all the boronic acid-functionalized materials. We further employed this approach to the analysis of intact proteins in human saliva. Totally 6 intact glycoproteins were successfully identified. As comparison, when the samples were analyzed without extraction, only a few glycopeptides were identified from the tryptic digest of HRP while no glycoproteins were found from the saliva samples.     

Amperometric biosensor based on immobilization of acetylcholinesterase via specific binding on biocompatible boronic acid-functionalized Fe@Au magnetic nanoparticles

A new method based on specific binding between glycoprotein acetylcholinesterase and boronic acid-functionalized Fe@Au magnetic nanoparticles was presented for the development of acetylcholinesterase biosensor. Alginate–graphene composite-modified electrode was firstly prepared as the substrate. Then, biocompatible boronic acid-functionalized Fe@Au magnetic nanoparticles were anchored by the covalence between the cis-diol of alginate and the boronic acid group on Fe@Au nanoparticles. Acetylcholinesterase was subsequently immobilized via the bonding between the glycosyl of acetylcholinesterase and the boronic acid group. The immobilized enzyme retained relatively high bioactivity and the fabricated biosensor exhibited high sensitivity and fast response to acetylthiocholine chloride. Based on enzyme inhibition, carbamate pesticide was detected using Furadan as a model compound. Two linear ranges of 0.05–15 and 15–400?ppb were obtained with a detection limit of 0.01?ppb. The biosensor also showed acceptable reproducibility and relatively good storage stability. Moreover, satisfactory results were obtained in the real sample analysis.     

Optically active core/shell nanoparticles prepared using self‐assembled polymer micelle as reactive nanoreactor

This article reports on optically active core/shell nanoparticles constituted by chiral helical polymers and prepared by a novel approach: using self‐assembled polymer micelles as reactive nanoreactors. Such core/shell nanoparticles were composed of optically active helical‐substituted polyacetylene as the core and thermosensitive poly(N‐isopropylacrylamide) as the shell. The synthetic procedure is divided into three major steps: (1) synthesis of amphiphilic diblock copolymer bearing polymerizable C[tbond]C bonds via atom transfer radical polymerization, followed by (2) self‐assembly of the diblock copolymer to form polymer micelles; and (3) catalytic emulsion polymerization of substituted acetylene monomer conducted using the polymer micelles as reactive nanoreactors leading to the core/shell nanoparticles. The core/shell nanoparticles simultaneously exhibited remarkable optical activity and thermosensitivity. The facile, versatile synthesis methodology opens new approach toward preparing novel multifunctional core/shell nanoparticles.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

具有温度响应壳层的金纳米粒子的制备

利用可逆-加成断裂链转移聚合得到全亲水性的嵌段共聚物(PEO-b-PNIPAM), 通过"grafting to"使其接枝到金纳米粒子表面. 通过透射电子显微镜、 紫外-可见吸收光谱、 能谱分析及动态光散射研究了杂化的金纳米粒子的壳层结构及温度响应行为. 实验结果表明, 得到核壳结构的金纳米粒子, 同时其壳层具有温度响应行为. 随着温度的升高, 其流体力学半径略有减小. 在整个升温过程中, 由于外层PEO链段的抑制作用, 没有发生粒子间的聚集.     

Poly(glyceryl glycerol): A multi‐functional hydrophilic polymer for labeling with boronic acids

The synthesis of poly(glyceryl glycerol) (PGG), a polymer featuring a polyethylene oxide backbone and 1,2‐diol groups in every repeating unit, is presented. PGG was prepared by monomer‐activated ring‐opening polymerization of (dl ?1,2‐isopropylidene glyceryl) glycidyl ether, introducing a functional azido‐ or bromo‐head group to each chain. The 1,2‐diol groups, which were released by acidic deprotection, readily reacted with boronic acid derivatives, enabling the attachment of functional moieties under mild aqueous conditions. PGG was conjugated to poly(l ‐lactide) (PLLA) via azide‐alkyne cycloaddition and the resulting copolymer assembled into nanoparticles of 70 nm diameter in aqueous solution. Labeling of the PGG–PLLA particles was achieved by simple mixing with a boronic acid‐functional fluorophore. The labeling efficiency was determined by fluorescence spectroscopy to be 85.5% for boronic acid‐functional rhodamine B compared with 0.2% for plain rhodamine B. The strong interaction of PGG with boronic acids is ascribed to its polyol structure. This study demonstrates the usefulness and versatility of PGG as a hydrophilic polymer for possible biomedical applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1822–1830     

Preparation of Silica/Poly(tert‐butylmethacrylate) Core/Shell Nanocomposite Latex Particles

Nanocomposite latex particles, with a silica nanoparticle as core and crosslinked poly(tert‐butylmethacrylate) as shell, were prepared in this work. Silica nanoparticles were first synthesized by a sol‐gel process, and then modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) to graft C?C groups on their surfaces. The MPS‐modified silica nanoparticles were characterized by elemental analysis, FTIR, and ²⁹Si NMR and ¹³C‐NMR spectroscopy; the results showed that the C?C groups were successfully grafted on the surface of the silica nanoparticles and the grafted substance was mostly the oligomer formed by the hydrolysis and condensation reaction of MPS. Silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were prepared via seed emulsion polymerization using the MPS‐modified silica nanoparticle as seed, tert‐butylmethacrylate as monomer and ethyleneglycol dimethacrylate as crosslinker. Their core/shell nanocomposite structure and chemical composition were characterized by means of TEM and FTIR, respectively, and the results indicated that silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were obtained.     

Preparation of monodisperse HPMC/PAA hybrid nanogels via surfactant-free seed polymerization

Herein we report a facile surfactant-free two-step method to prepare hydroxypropyl methylcellulose/poly(acrylic acid) (HPMC/PAA) hybrid nanogels. The HPMC/poly(N,N′-methylenebisacrylamide) (PMBA) nanoparticles were firstly prepared by free radical polymerization of N,N′-methylenebisacrylamide (MBA) in HPMC aqueous solution. In the second step, HPMC/PAA nanogels were synthesized by polymerization using the as-prepared HPMC/PMBA nanoparticles as the seeds and acrylic acid (AA) and MBA as the monomer and cross-linker, respectively. Dynamic light scattering (DLS) experiments indicated the nanogels were monodispersed with the nanogel sizes ranging from 95 to 310 nm and the polydispersity index (PDI) values ranging from 0.043 to 0.122. Transmission electron microscope (TEM) experiments demonstrated that nanogels have a core/shell structure. Furthermore, the monodisperse nanogels have a good temperature and pH sensibility, and the nanogel diameter was decreased with increasing temperature while increased with rising pH. This method provides a new way of preparation of monodisperse polymer nanogels with a core/shell structure.     

Fuzzy ternary particle systems by surface-initiated atom transfer radical polymerization from layer-by-layer colloidal core-shell macroinitiator particles

We report the synthesis of ternary polymer particle material systems composed of (a) a spherical colloidal particle core, coated with (b) a polyelectrolyte intermediate shell, and followed by (c) a grafted polymer brush prepared by surface-initiated polymerization as the outer shell. The layer-by-layer (LbL) deposition process was utilized to create a functional intermediate shell of poly(diallyl-dimethylammonium chloride)/poly(acrylic acid) multilayers on the colloid template with the final layer containing an atom transfer radical polymerization (ATRP) macroinitiator polyelectrolyte. The intermediate core-shell architecture was analyzed with FT-IR, electrophoretic mobililty (zeta-potential) measurements, atomic force microscopy, and transmission electron microscopy (TEM) techniques. The particles were then utilized as macroinitiators for the surface-initiated ATRP grafting process for poly(methyl methacrylate) polymer brush. The polymer grafting was confirmed with thermo gravimetric analysis, FT-IR, and TEM. The polymer brush formed the outermost shell for a ternary colloidal particle system. By combining the LbL and surface-initiated ATRP methods to produce controllable multidomain core-shell architectures, interesting functional properties should be obtainable based on independent polyelectrolyte and polymer brush behavior.     

Well-Defined Poly(butyl cyanoacrylate) Nanoparticles via Miniemulsion Polymerization

Summary: Despite the high reactivity of the monomer, nanoparticles with a hydrophobic core based on poly(butyl cyanoacrylate) and a hydrophilic shell based on poly(ethylene oxide) PEO were synthesized in one step by miniemulsion polymerization. Colloidal properties of the nanoparticles were controlled by the structure and the amount of amphiphilic polymer in the aqueous phase, while the molecular weight of core depended on pH of the continuous phase and the polymerization mechanism (anionic or radical). The evolution of the molecular weight of the synthesized poly(butyl cyanoacrylate) was followed as a function of time at pH 7.4 by size exclusion chromatography. As expected, the degradation kinetics depended on the polymerization mechanism. Finally, a model compound, pyrene, was encapsulated in the synthesized nanoparticles. Its release was found to depend on the conditions of nanoparticles synthesis, especially on the polymerization mechanism.     

Preparation of platinum nanoparticles using star-block copolymer with a carboxylic core

Well-defined star polymers containing a functionalized core supply a molecular nanocavity and may be used to control formation of inorganic nanoparticles. Herein, platinum (Pt) nanoparticles of 2-4 nm were prepared by using (poly(acrylic acid)-b-polystyrene)6 (PAA-b-PS)6 amphiphilic star block copolymer as a novel single molecular stabilizer. This PAA core functionalized star polymer was obtained by hydrolysis of (poly(tert-butyl acrylate)-b-polystyrene)6 (PtBA-b-PS)6, which was synthesized by sequential atom transfer radical polymerization (ATRP) of tert-butyl acrylate and styrene with an initiator bearing six 2-bromoisobutyloxyl groups. Pt(IV) ions were loaded by ion exchange to the core of the star polymer and Pt nanoparticle stabilized by single star polymer was produced by a reduction with NaBH4.     

Preparation of poly (styrene-methyl methacrylate)/SiO2 composite nanoparticles via emulsion polymerization. An investigation into the compatiblization

Inorganic/organic nanocomposite systems, in which inorganic particles are encapsulated into the polymer matrix, are new classes of polymeric materials. These materials combine the properties of both components. It means that polymer component with excellent optical property, flexibility and toughness could improve the brittleness of inorganic particles and besides, inorganic particles could increase the strength and modulus of polymers. There are various methods to make these inorganic/organic nanocomposites. One of them is the chemical process, in which polymerization is performed directly in the presence of the inorganic particles. Examples of miniemulsion, suspension or dispersion polymerization can be found in the literature but emulsion polymerization is by far the technique most frequently used.In this work, latex containing nanostructure hybrid of copolymer (styrene, methyl methacrylate, acrylic acid) and inorganic nanoparticles (silica) with core/shell structure was prepared via semi-batch emulsion polymerization. At first, silica nanoparticles were dispersed in water phase in an ultrasound bath to prevent the aggregation of nanoparticles, and then emulsion polymerization was performed in the presence of silica nanoparticles. Related tests and analysis confirmed the success in synthesis of nanostructure hybrids. Induced coupled plasma (ICP) analysis and thermal gravimetric analysis (TGA) showed the presence and amount of silica nanoparticles in the final latex. Dynamic light scattering (DLS) analysis confirmed the presence of 25-35 nm particles in the system and transmission electron microscopy (TEM) showed the core/shell morphology of nanoparticles. It has been shown that with an appropriate surfactant, adjusting the pH of media, using suitable monomers and under controlled conditions, it would be possible to produce stable organic/inorganic composite nanoparticles with core/shell structure. In another attempt and in order to investigate the effect of compatiblizing system, styrene-methyl methacrylate was copolymerized in the presence of modified silica particles with oleic acid as the inorganic dispersed phase at the same condition. Similar characterizations were performed in order to have a worthwhile comparison. The results for the late procedure show the effect of oleic acid in formation of aggregates as the core for polymeric nanocomposite particles.     

Preparation of epoxy‐functionalized polystyrene/silica core–shell composite nanoparticles

Epoxy‐functionalized polystyrene/silica core–shell composite nanoparticles were prepared by the postaddition of glycidyl methacrylate (GMA) via emulsion polymerization. The outermost shell of obtained multilayered core–shell particles was made up of poly(glycidyl methacrylate) (PGMA). A semicontinuous process involving the dropwise addition of GMA was used to avoid demulsification of the emulsion system. The amount of grafted PGMA was quantified by Fourier transform infrared spectroscopy and was altered in a wide range (1–50 wt % to styrene). The binding efficiency was usually high (ca. 90%), indicating strong adhesion between the silica core and the polymer shell. There were approximately four or five original silica beads, which formed a cluster, per composite of nanoparticles whose size was about 60–70 nm. Other main factors of polymerization conditions including the amounts of sodium dodecyl sulfonate and silica are also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2253–2262, 2004     

Synthesis of titania/polymer core-shell hybrid microspheres

Monodisperse titania/polymer core-shell microspheres were prepared by a two-stage reaction with titania as core and poly(ethyleneglycol dimethacrylate) (PEGDMA) as shell, in which the titania cores were synthesized by a sol-gel method and subsequently grafted with 3-trimethoxysilyl methacrylate as the first-stage reaction to incorporate the vinyl groups on the surface of inorganic core. The PEGDMA shell was then encapsulated over the MPS-modified titania core by distillation precipitation polymerization of ethyleneglycol dimethacrylate in neat acetonitrile during the second-stage polymerization via capture of the radicals of EGDMA with the aid of the reactive vinyl groups on the surface of inorganic core without any stabilizer or surfactant. The shell thickness of the core-shell hybrid microspheres was controlled by the feed of EGDMA monomer during the polymerization. The resultant titania particles and core-shell microspheres were studied by transmission electron microscopy, Fourier-transform infrared spectra, X-ray photoelectron spectroscopy, and thermogravimetric analysis.     

PEG-PLA block copolymer as potential drug carrier: preparation and characterization

Diblock and multiblock copolymers composed of a poly(D,L-lactide) (PLA) or poly(trimethylene carbonate) (PTMC) core with a hydrophilic chain of poly(ethylene glycol) (PEG) were prepared. These copolymers, in which the core is connected to PEG through a polyfunctional molecule such as citric, mucic, or tartaric acid, may be used to form nanoparticles for drug delivery applications. Branched copolymers were prepared by direct amidation between the polyfunctional acid and methoxy PEGamine, followed by ring-opening polymerization of lactide or trimethyl carbonate to form the PLA and PTMC block copolymers. In addition, a complex multiblock copolymer of biotin-PEG-poly[lactic-co-(glycolic acid)] (PLGA) for application in an avidin-biotin system was prepared for possible design of nanospheres with targeting properties. Studies of drug release from polymeric systems containing multiblock copolymers and studies of polymer degradation were also performed.     

Fabrication of monodisperse luminescent nanoparticles with core/shell poly(styrene/thiophene) structure

Luminescent poly(styrene/thiophene) (PSt/PT) core/shell nanoparticles were prepared by oxidative polymerization in the presence of PSt seed particles. PSt seed particles with uniform size distribution were prepared with an anionic surfactant by an emulsion polymerization process, and were used as a template to prepare monodispersive PT‐coated nanoparticles. A luminescent Polythiophene (PT) layer was formed on the surface of PSt nanoparticles by oxidation polymerization with iron chloride (FeCl₃) and hydrogen peroxide (H₂O₂). The mechanism of core/shell formation was found to be the interface‐dominant polymerization induced by the electrostatic attraction between the sulfonate group of anionic surfactant and Fe³⁺ ions after the diffusion of thiophene monomer to the PSt nanoparticles. Field‐emission scanning electron microscopy and transmission electron microscopy (TEM) proved the core/shell structure, which provided key evidence that PT was incorporated onto the surface of PSt nanoparticles. In addition, the effect of the PT shell thickness on photoluminescent (PL) intensity was investigated by changing the shell thickness of PSt/PT nanoparticles. We observed that the PL intensity increased up to about 30 nm of PT shell thickness, and then decreased due to self‐absorption. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5968–5975, 2008     

Synthesis and characterization of multifunctional Fe3O4/poly(fluorescein O-methacrylate) core/shell nanoparticles

Multifunctional fluorescent and superparamagnetic Fe(3)O(4)/poly(fluorescein O-methacrylate) [Fe(3)O(4)/poly(FMA)] nanoparticles with core/shell structure were synthesized via surface-initiated polymerization. First, polymerizable double bonds were introduced onto the surface of Fe(3)O(4) nanoparticles via ligand exchange and a condensation reaction. A fluorescent monomer, FMA, was then polymerized to the double bonds at the surface via free-radical polymerization, leading to form a fluorescent polymer shell around the superparamagnetic Fe(3)O(4) core. The resultant Fe(3)O(4)/poly(FMA) nanoparticles were characterized by Fourier transform infrared, nuclear magnetic resonance, and X-ray diffraction spectroscopy to confirm the reactions. Transmission electron microscopy images showed that the Fe(3)O(4)/poly(FMA) nanoparticles have a spherical and monodisperse core/shell morphology. Photoluminescence spectroscopy and superconducting quantum interference device magnetometer analyses confirmed that the Fe(3)O(4)/poly(FMA) nanoparticles exhibited fluorescent and superparamagnetic properties, respectively. In addition, we demonstrated the potential bioimaging application of the Fe(3)O(4)/poly(FMA) nanoparticles by visualizing the cellular uptake of the nanoparticles into A549 lung cancer cells.     

Electrosprayed core-shell nanoparticles of PVP and shellac for furnishing biphasic controlled release of ferulic acid

Coaxial electrospraying was explored to organize polymer excipients in a core-shell manner for providing biphasic controlled release of active ingredient. With ferulic acid (FA) as a model drug, and shellac and polyvinylpyrrolidone (PVP) as the core and shell polymeric matrices, core-shell nanoparticles were successfully fabricated. A series of tests were carried out to characterize the prepared core-shell nanoparticles and also the nanoparticles prepared using a single fluid electrospraying of the shell or core fluids alone. The core-shell nanoparticles had an average diameter of 530?±?80 nm with clear core-shell structure. The contained FA was converted to an amorphous state both in the core and the shell parts due to the favorable hydrogen bonding between the components. In vitro dissolution tests demonstrated that the core-shell nanoparticles were able to provide the desired biphasic drug-controlled release profiles. Coaxial electrospraying is a useful tool for the development of novel nanodrug delivery systems from polymers.     

pH‐responsive polymer core–shell nanospheres for drug delivery

Stimuli‐responsive polymer nanoparticles are playing an increasingly more important role in drug delivery applications. However, limited knowledge has been accumulated about processes which use stimuli‐responsive polymer nanospheres (matrix nanoparticles whose entire mass is solid) to carry and deliver hydrophobic therapeutics in aqueous solution. In this research, pyrene was selected as a model hydrophobic drug and a pyrene‐loaded core‐shell structured nanosphere named poly(DEAEMA)‐poly(PEGMA) was designed as a drug carrier where DEAEMA and PEGMA represent 2‐(diethylamino)ethyl methacrylate and poly(ethylene glycol) methacrylate, respectively. The pyrene‐loaded core‐shell nanospheres were prepared via an in situ two‐step semibatch emulsion polymerization method. The particle size of the core‐shell nanosphere can be well controlled through adjusting the level of surfactant used in the polymerization where an average particle diameter of below 100 nm was readily achieved. The surfactant was removed via a dialysis operation after polymerization. Egg lecithin vesicles (liposome) were prepared to mimic the membrane of a cell and to receive the released pyrene from the nanosphere carriers. The in vitro release profiles of pyrene toward different pH liposome vesicles were recorded as a function of time at 37 °C. It was found that release of pyrene from the core‐shell polymer matrix can be triggered by a change in the environmental pH. In particular the pyrene‐loaded nanospheres are capable of responding to a narrow window of pH change from pH = 5, 6, to 7 and can achieve a significant pyrene release of above 80% within 90 h. The rate of release increased with a decrease in pH. A first‐order kinetic model was proposed to describe the rate of release with respect to the concentration of pyrene in the polymer matrix. The first‐order rate constant of release k was thus determined as 0.049 h^?1 for pH = 5; 0.043 h^?1 for pH = 6; and 0.035 h^?1 for pH = 7 at 37 °C. The release of pyrene was considered to follow a diffusion‐controlled mechanism. The synthesis and encapsulation process developed herein provides a new approach to prepare smart nanoparticles for efficient delivery of hydrophobic drugs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4440–4450