Sono-anodic stripping voltammetric determination of cadmium in the presence of surfactant

The effect of applying ultrasound in anodic stripping voltammetry analysis of Cd²⁺ in pH 4.6 buffer containing the surfactant Triton X-100 has been investigated. Manipulation of the horn intensity and the horn/electrode distance was found to reduce the deleterious influence of the surfactant on the height of the cadmium peak. The system has been optimised to take advantage of the in situ cleaning action offered by ultrasound. As a result facile detection of Cd²⁺ (0.05–4 μM) in solutions containing 10 μg/mL Triton X-100 can be achieved without recourse to sample pretreatments or electrode modifications. Received: 17 April 2000 / Revised: 2 June 2000 / /Accepted: 8 June 2000     

Effect of inorganic positive ions on the adsorption of surfactant Triton X-100 at quartz/solution interface

The electrode-separated piezoelectric sensor (ESPS), an improved setup of quartz crystal microbalance (QCM), has been employed to investigate the adsorption behavior of nonionic surfactant Triton X-100 at the hydrophilic quartz-solution interface in mineralized water medium in situ, which contained CaCl2 0.01 mol·L?1, MgCl2 0.01 mol·L?1, NaCl 0.35 mol·L?1. In a large scale of surfactant concentration, the effects of Ca2 , Mg2 and Na on the adsorption isotherm and kinetics are obviously different. In aque-ous solution containing NaCl only, adsorption of Triton X-100 on quartz-solution interface is promoted, both adsorption rate and adsorption amount increase. While in mineralized water medium, multivalent positive ions Ca2 and Mg2 are firmly adsorbed on quartz-solution interface, result in the increasing of adsorption rate and adsorption amount at low concentration of surfactant and the peculiar desorption of surfactant at high concentration of Triton X-100. The results got by solution depletion method are in good agreement with which obtained by ESPS. The "bridge" and "separate" effect of inorganic positive ions on the adsorption and desorption mechanism of Triton X-100 at the quartz- solution interface is discussed with molecular dynamics simulations (MD), flame atomic absorption spectrometry (FAAS) and atomic force microscopy (AFM) methods.     

Voltammetric determination of cadmium(II) using a chemically modified electrode

An 1-(pyridylazo)-2-naphthol modified glassy carbon electrode has been investigated as sensor for the measurement of trace levels of Cd²⁺. Cd²⁺ is deposited on the surface of a PAN modified glassy carbon electrode at –1.10 V (vs. SCE) via forming Cd²⁺–PAN and subsequent reduction at the electrode. In the following step, Cd-PAN is oxidized, and voltammograms are recorded by scanning the potential in a positive direction. Calibration plots were found to be linear in the range 2 × 10^–8 mol/L to 8 × 10^–7 mol/L. The detection limit was 5 × 10^–10 mol/L, and the coefficient of variation, determined on one single electrode at a concentration of 5 × 10^–7 mol/L, was calculated to be 3.2% (n = 5). Using this new kind of modified electrode, trace levels of Cd(II) in water samples were determined; the average recovery was calculated to be 98.78%. Received: 17 August 2000 / Revised: 19 December 2000 / Accepted: 27 December 2000     

Ligand and surfactant effects on a novel electrochemiluminescent reaction involving cadmium

Electrochemiluminescence (ECL) is the generation of light during a chemical reaction with at least one of the reagents being generated in situ at an electrode. Recently, a host of methods have been developed employing ECL reactions as an analytical technique where one of the ECL reagents is the analyte. Electrochemiluminescent reactions involving aqueous metal ions can offer an alternative method for quantitation of dissolved metals. Previous work developed an ECL system using 1,10-phenanthroline as an ECL reagent in conjunction with Cd²⁺ ions providing sufficient emission for reliable cadmium detection. This paper explores the effects of ligand modification, choice of surfactant, and the interaction between the surfactant and the co-reactant tripropylamine (TPA). The effectiveness of the reagents tested can be ranked as phenanthroline, bathophenanthroline salt, terpyridine, dimethylphenanthroline, and bipyridine in order of decreasing Cd²⁺ specific ECL emissions. The non-ionic surfactants Triton X-100, Thesit, and Nonidet P40 were surveyed.     

Assessment of Inorganic Fibre Burden in Biological Samples by Scanning Electron Microscopy – Energy Dispersive Spectroscopy

A method based on cloud point extraction (CPE) separation/preconcentration of trace cadmium as a prior step to its determination by graphite furnace atomic absorption spectrometry (GFAAS) has been developed. If the system temperature is higher than the cloud point temperature (CPT) of the nonionic surfactant of p-octyl polyethyleneglycolphenyether (Triton X-100), the complex of Cd²⁺ with 1-(2-pyridylazo)-2-naphthol (PAN) could be extracted into surfactant-rich phase. The chemical variables affecting CPE were evaluated and optimized. Under the optimum conditions, preconcentrating 10.0 mL of water samples permitted a limit of detection of 5.9 ng · L⁻¹ (3σ) for cadmium with an enhancement factor of 50 and a relative standard deviation of 2.1% (n = 11, c = 2.0 ng · mL⁻¹). The method was applied to the determination of cadmium in reference material and water samples with satisfactory results.     

Enhanced electrochemiluminescence from Os(phen)2(dppene) (phen=1,10-phenanthroline and dppene=bis(diphenylphosphino)ethene) in the presence of Triton X-100 (polyethylene glycol tert-octylphenyl ether)

The effects of the non-ionic surfactant Triton X-100 (polyethylene glycol tert-octylphenyl ether) on the properties of Os(phen)₂(dppene)²⁺ (phen=1,10-phenanthroline and dppene=bis(diphenylphosphino)ethene) electrochemiluminescence (ECL) have been investigated. The anodic oxidation of Os(phen)₂(dppene)²⁺ produces ECL in the presence of tri-n-propylamine (TPrA) in aqueous surfactant solution. Increases in ECL efficiency (≥3-fold) and TPrA oxidation current (≥2.0-fold) have been observed in surfactant media with experiments supporting adsorption of surfactant on the electrode surface.     

Surfactant effects on methanol oxidation at Pt–Ru/C coated glassy carbon electrode

The role of surfactants, cetyl trimethyl ammonium bromide (CTAB), sodium dodecyl sulphate (SDS) and Triton X-100 (in the catalyst), on methanol oxidation at commercial 50:50 Pt–Ru/C catalyst-coated glassy carbon has been studied using cyclic voltammetry, scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Surfactant containing catalysts showed a considerable reduction in the methanol oxidation potential. In terms of oxidation potential, better results (lower methanol oxidation potential) were observed in the order SDS > Triton X-100 > CTAB > no surfactant. SEM studies on the catalyst ink showed better homogeneity in the sample prepared using surfactant. This indicates better Pt Pt contact, which is likely to favour methanol adsorption and its oxidation. Hence, lowering of oxidation potentials for methanol oxidation could be seen with use of surfactants. Results of FT-IR on the catalyst ink showed definite changes in the frequencies in the case of Pt–Ru/C containing surfactants indicating definite interaction between catalyst and surfactant. Catalysts, with and without surfactants, yielded linear plots of concentration vs peak currents for methanol oxidation (0–2 M). With surfactant containing catalysts, reduction in methanol oxidation current was observed, and the order followed was the reverse of the above.     

Influence of Cations on the Formation of Cobalt(II) Complexes with Thiocyanate Ions in Solutions of Nonionic Micelles

The influence of additives of alkali, alkaline-earth, and several transition metal cations, protonated amines, and quaternary ammonium on the state of the tetrahedral cobalt(II) thiocyanate complex is studied in an aqueous solution of the nonionogenic surfactant Triton X-100. It is shown that alkali and alkaline-earth metal cations and compounds containing protonated primary amino groups favor the formation of additional amounts of the micellar-bonded [Co(NCS)₄]^2– complex anion. This fact is explained by the interaction of these cations with the oxyethylene chains of the nonionogenic surfactant as was observed in the crown ether coordination. This provides the formation and transfer into micelles of additional amounts of their associates with [Co(NCS)₄]^2–. The Mn²⁺, Ni²⁺, and Cd²⁺ cations decompose cobalt tetrathiocyanate due to the formation of their own complexes with the ligand. This effect is not observed in the case of the quaternary ammonium compounds, which is explained by their incapability of coordinating the oxyethylene chains of the nonionogenic surfactant.     

Determination of tin in marine sediment slurries by electrothermal atomic absorption spectrometry using palladium-magnesium nitrate as chemical modifier

 A method was optimized for the determination of tin in slurries of marine sediment samples using palladium-magnesium nitrate as chemical modifier and Triton X-100 (0.1%) surfactant as stabilizer. To obtain a complete pyrolysis of the slurry sample, two charring steps were used, the first at 480 °C and the second at 1300 °C. The precision and accuracy of the method were studied using the Reference Material PACS-1 (marine sediment) from National Research Council Canada. The detection limit (LOD) was 57.6 μg kg^-1. The method was applied to the determination of tin in marine sediment samples from the Galicia coast. Received: 16 February 1996/Revised: 26 March 1996/Accepted: 12 April 1996     

Synthesis of nanostructured Cd–Se–Te films through periodic voltammetry for photoelectrochemical applications

In the present investigation, polycrystalline semiconductor Cd–Se–Te films have been electrodeposited at room temperature on conducting glass substrates using cyclic voltammetric technique under controlled periodic scans. The successive anodic and cathodic scans were recorded within the potential range, from 0 to −1.0 V, and over the range of periodic cycles, from 250 to 2,000, in an acidic bath containing respective reducible precursor ions like Cd²⁺, Se⁴⁺, Te⁴⁺, and 1 vol.% Triton X-100 as the surface-active reagent. Thin composite films were produced having variable thickness and composition and grain size of the order of 80–100 nm. The film properties were determined by focused ion beam analysis, energy dispersive analysis of x-rays, x-ray diffraction studies, atomic force microscopy, and scanning electron microscopy. Thickness of the semiconductor films was found to increase linearly with the number of voltammetric cycles. Band gap energies of the films as derived from the reflectance spectra were found to lie between 1.4 and 1.7 eV. The composite films of the Cd–Se–Te ternary system when electrochemically characterized in aqueous polysulfide solution exhibited n-type semiconducting properties and photoconversion efficiency more than 0.4%.     

Elution of 17α 25-Norhopanes and Triaromatic Steroids from Weathered Soils by Mixed Triton X-100/Na2SiO3 Surfactant Solution

Sodium silicate(Na₂SiO₃) was used to improve the elution of super heavy oil from weathered soil on an ultrasound-enhanced elution system by the solution containing 0―6000 mg/L surfactant Triton X-100. The removal extent of three markers[C_26―34 17α 25-norhopanes, C_26―28 triaromatic steroids(TAS), and C_27―29 methyl triaromatic steroids(MTAS)] was monitored. The average elution percentages of C_26―34 norhopanes, C_26―28 TAS, and C_27―29 MTAS by Triton X-100/Na₂SiO₃ solutions were increased by 11%―13%, 9%―11% and 8%―13% with increasing Triton X-100 concentrations from 150 mg/L to 6000 mg/L. All the concentrations of Triton X-100 improved the elution of TAS homologs containing fewer carbon atoms, whereas high concentrations improved the elution of larger 17α 25-norhopane and MTAS species. Addition of Na₂SiO₃ produced a noticeable increase in elution, particularly for lower-weight species. Scanning electron microscope(SEM) images and energy spectroscopy data reveal that surfactant solution of 6000 mg/L Triton X-100 and 4000 mg/L Na₂SiO₃ produced the greatest improvement in the elution of super heavy oil aggregates encapsulating the soil surface and the emulsification of particle dispersions. That is to say mixed solutions of Triton X-100 and Na₂SiO₃ in combination with ultrasound are a potential means of removing super heavy oil from weathered soils.     

Photoinduced charge transfer mechanism in PPV [poly(p-phenylinevinylene)] polymer: role of iodide species

The photophysical and photochemical behavior of poly(p-phenylinevinylene (PPV) polymers in different solvents (toluene and Triton X-100) and in thin form [PPV/optical transparent electrode (OTE)] has been investigated by emission and transient absorption spectroscopies. The absorption and emission studies strongly indicate the presence of dynamic quenching for PPV polymers in different solvents (toluene and Triton X-100) in the presence of LiI/I₂. The fluorescence quenching of the PPV polymer by iodide obeys the linear Stern–Volmer equation for PPV/toluene/LiI system. The positive deviation from Stern–Volmer observed in PPV/Triton X-100/I₂ system may be accounted for by the “quenching sphere of action model”. Emission studies indicated an increased conjugation length for PPV polymers on going from solution to the solid state. The emission of PPV was readily quenched by hole scavengers such as I⁻ (LiI, I₂). The photoinduced charge transfer to these hole scavengers was studied by laser flash photolysis. The transient absorption measurements confirm the formation of I⁻ and subsequent formation of which has been reported for the first time for PPV/I₂ system.     

Reduction of hexavalent chromium at solid electrodes in acidic media: reaction mechanism and analytical applications

The electrochemical detection of hexavalent chromium species was investigated. It was found that Cr(VI) can undergo chemically irreversible reduction in acidic solutions at gold, glassy carbon and boron-doped diamond electrodes. The process was found to be diffusionally controlled at all three electrodes studied. The response obtained at a gold electrode towards the reduction of chromium(VI) produced an electrochemically reversible wave in contrast to those recorded at glassy carbon and boron-doped diamond electrodes. The analytical response of the hexavalent species was studied at gold electrodes in the presence of common environmental interferences: Ni²⁺, Cu²⁺, Fe³⁺, Cr³⁺ and Triton X-100 (surfactant), with an LoD of 4.3 μM obtained in the presence of 5 mM Cr(III).     

Magnetic Relaxation Probing of the State of Diheptyl Dithiophosphate Ions in Water and Aqueous Triton X-100 Solutions

The nuclear magnetic relaxation was used to study the state of diheptyl dithiophosphoric acid (D7DTP, L₇) anions in water and aqueous solutions of the nonionic surfactant, Ttiton X-100, at 298 K in the presence of paramagnetic probes, Mn²⁺ions. It was found that increase in the spin-lattice relaxation rate of water protons is caused by formation of simple and mixed (with surfactant) aggregates of D7DTP. Unlike the Mn²⁺–sodium dodecyl sulfate –Triton X-100 system, studied previously an influence of a probe concentration was found at surfactant concentration close to the CMC. It was suggested that two types of mixed species containing diheptyl dithiophosphate ions, Mn(II), and nonionic surfactant can be formed: micellar aggregates, {Mn(L₇)₂(TX)}, and polynuclear associates, [Mn _x (L₇) _y (tx) _z ]. The associates likely contain surfactant in the form of monomers (tx).     

Oxygen effect in the radiolysis of Triton X-100 aqueous solution

Experiments with Triton X-100 as a model surfactant were performed under steadystate conditions, using deoxygenated solutions as well as those saturated with N₂O, O₂ or N₂O/O₂ mixtures. The Triton X-100 decomposition yield was dependent on the O₂ content of the irradiated system. Oxygen promoted surfactant decomposition in aqueous solution containing only Triton X-100.     

Development of a cloud point extraction and preconcentration method for chromium(III) and total chromium prior to flame atomic absorption spectrometry

A sensitive and selective method has been developed for the determination of chromium in water samples based on using cloud point extraction (CPE) preconcentration and determination by flame atomic absorption spectrometry (FAAS). The method is based on the complexation of Cr(III) ions with Brilliant Cresyl Blue (BCB) in the presence of non-ionic surfactant Triton X-114. Under the optimum conditions, the preconcentration of 50 mL of water sample in the presence of 0.5 g/L Triton X-114 and 1.2 × 10⁻⁵ M BCB permitted the detection of 0.42 μg/L chromium(III). The calibration graph was linear in the range of 1.5–70 μg/L, and the recovery of more than 99% was achieved. The proposed method was used in FAAS determination of Cr(III) in water samples and certified water samples. In addition, the developed CPE-FAAS method was also used for speciation of the inorganic chromium species after reduction of Cr(VI) to Cr(III) using a thiosulphate solution of 120 mg/L in the presence of Hg(II) ion as a stabilizer.     

Tensammetry with accumulation on the hanging mercury drop electrode : Part 3. The behaviour of triton X-100 in mixtures with PEG-9000

The behaviour of Triton X-100, which can be present in monomeric or associated form, and its mixtures with PEG-9000, which does not undergo association, is described. The tensammetric curve of Triton X-100 alone shows one or two peaks at negative potentials, depending on the concentration of Triton X-100, i.e., on the presence of associated forms. For <2 mg l^?1, there is one broad peak, related to monomers of Triton X-100. The calibration plot for this peak is sigmoidal but its rising section (0.05–0.20 mg l^?1) is approximately linear. The calibration curve of the second, much narrower, peak related to associated forms of Triton X-100, grows parabolically with increasing concentration of Triton X-100. The behaviour of a mixture of PEG-9000 with a larger amount of Triton X-100 is similar to the behaviour of a model mixture of components with sufficiently different properties (e.g., PEG 1500/PEG 9000). The peak for PEG-9000, the stronger surfactant, is relatively less affected by a large amount of Triton X-100. Even this effect can be decreased by using a suitable preconcentration potential (?1.45 V vs. SCE) so that PEG-9000 can be determined in the presence of a 1000-fold amount of Triton X-100. Both peaks of Triton X-100 are greatly decreased by the presence of PEG-9000 and the broad peak can be completely suppressed. Triton X-100 cannot be determined accurately in the presence of unknown amounts of PEG-9000.     

Diffusion in surfactant solutions

The diffusion coefficients in water of Triton X-100 and sodium dodecyl sulfate were measured as a function of concentration using the Taylor dispersion technique. For Triton X-100, a nonionic surfactant, the diffusion coefficient drops from 7.4 × 10^-7 cm²/sec at 0.45 g/liter to 6.45 x 10^-7 cm²/sec at 5 g/liter. The diffusion coefficient of methyl yellow solubilized in Triton X-100 is close to that of the surfactant. This behavior is quantitatively consistent with a chemical equilibrium between monomer and micelle. For sodium dodecyl sulfate, an anionic surfactant, the diffusion coefficient increases from 1.76 x 10^-6 cm²/sec at 0.01 M to 4.53 x 10^-6 cm²/sec at 0.125 M. The increase is less when 0.1 M NaCl is added. The diffusion coefficient of the methyl yellow solubilized by the SDS is significantly less than that of the surfactant, particularly at low ionic strength. This behavior can be quantitatively explained by including electrostatic coupling between monomer, micelle, and counterion.     

Determination of selenium in infant foods using electrothermal atomic absorption spectrometry with direct slurry sample introduction

Slurry sampling electrothermal atomic absorption (SS ETAAS) was applied to the development of a sensitive and precise method for selenium determination in infant foods without sample pretreatment. Suspensions prepared in a medium containing 0.1% Triton X-100, 0.5 or 5% v/v concentrated HNO₃ were directly introduced into the furnace. The accuracy of the procedure was confirmed by analysis of a standard reference material and comparison with hydride generation atomic absorption spectrometric (HGAAS) procedure. The characteristic mass is 44 pg and detection limit 0.43 μg·l⁻¹.     

The Micellization and Clouding of Nonionic Surfactant,Poly(Ethylene Glycol) t-Octylphenyl Ether (Triton X-100): Effect of Halide Ions of (Sodium Salt) Electrolytes

In this investigation, the micellization and the clouding phenomena of a nonionic surfactant, poly(ethylene glycol) t-octylphenyl ether (Triton X-100) in the absence and presence of halide ions (sodium salt) electrolytes has been reported. The critical micelle concentration (CMC) of Triton X-100 (in the absence and presence of electrolytes) was measured by surface tension measurements. A decreasing trend of CMC was found with increasing the temperature as well as the concentration of electrolyte. The effectiveness of the halide ions was found in the order: F^? > Cl^? > Br^? > I^?. The surface properties of Triton X-100 were evaluated. The thermodynamic parameters of the micellar systems of Triton X-100 were evaluated and from these thermodynamics data, it was found that in the presence of electrolyte the stability of the micellar system is more. The cloud points (CPs) of Triton X-100 were also measured in the absence and presence of halide ions of electrolytes. With the addition of halide ions of sodium salt (electrolyte), a decrease in CP values was observed and the order was found to be: F^? > Cl^? > Br^? > I^?.