Efficient and selective Al-catalyzed alcohol oxidation via Oppenauer chemistry

A highly active and selective Al-based catalytic Oppenauer (O) oxidation is reported. Quantitative and selective oxidations of a variety of benzylic, propargylic, allylic, and aliphatic primary and secondary alcohols were achieved using nitrobenzaldehyde derivatives as the oxidant and simple aluminum compounds as precatalysts.     

Cu(II) 2-quinoxalinol salen catalyzed oxidation of propargylic,benzylic, and allylic alcohols using tert-butyl hydroperoxide in aqueous solutions

The synthesis of carbonyl compounds by oxidation of alcohols is a key reaction in organic synthesis. Such oxidations are typically conducted using catalysts featuring toxic metals and hazardous organic solvents. Considering green and sustainable chemistry, a copper(II) complex of sulfonated 2-quinoxalinol salen (sulfosalqu) has been characterized as an efficient catalyst for the selective oxidation of propargylic, benzylic, and allylic alcohols to the corresponding carbonyl compounds in water when in combination with the oxidant tert-butyl hydroperoxide. The reactions proceed under mild conditions (70 °C in water) to produce yields up to 99% with only 1 mol % of catalyst loading. This reaction constitutes of a rare example of propargylic alcohol oxidation in water, and it makes this process greener by eliminating the use of hazardous organic solvents. Excellent selectivity was achieved with this catalytic protocol for the oxidation of propargylic, benzylic, and allylic alcohols over aliphatic alcohols. The alcohol oxidation is thought to go through a radical pathway.     

Highly practical copper(I)/TEMPO catalyst system for chemoselective aerobic oxidation of primary alcohols

Aerobic oxidation reactions have been the focus of considerable attention, but their use in mainstream organic chemistry has been constrained by limitations in their synthetic scope and by practical factors, such as the use of pure O(2) as the oxidant or complex catalyst synthesis. Here, we report a new (bpy)Cu(I)/TEMPO catalyst system that enables efficient and selective aerobic oxidation of a broad range of primary alcohols, including allylic, benzylic, and aliphatic derivatives, to the corresponding aldehydes using readily available reagents, at room temperature with ambient air as the oxidant. The catalyst system is compatible with a wide range of functional groups and the high selectivity for 1° alcohols enables selective oxidation of diols that lack protecting groups.     

A mild and efficient method for the stereoselective formation of C-O bonds: palladium-catalyzed allylic etherification using zinc(II) alkoxides

[reaction: see text] A highly chemo- and stereoselective palladium-catalyzed allylic etherification reaction is described. The use of zinc(II) alkoxides proved effective in promoting the addition of the oxygen nucleophile derived from aliphatic alcohols to eta(3)-allylpalladium complexes. Using diethylzinc (0.5 equiv), 5 mol % of Pd(OAc)(2), and 7.5 mol % of 2-di(tert-butyl)phosphinobiphenyl in THF, the cross-coupling reaction between various aliphatic alcohols and allylic acetates proceeded at ambient temperature to furnish allylic ethers with high stereoselectivity.     

Polymer-supported nitroxyl radical catalyst for selective aerobic oxidation of primary alcohols to aldehydes

PS-TEMPO, a polymer-supported 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO), was successfully applied as a recyclable, active and selective catalyst for the oxidation of primary aliphatic and benzylic alcohols to aldehydes by molecular oxygen in the presence of Co(NO3)2 and Mn(NO3)2 as co-catalysts.     

Aerobic photocatalytic oxidation of activated benzylic and allylic alcohols to carbonyl compounds catalyzed by molecular iodine

An efficient, selective and environmentally benign photocatalytic system in acetonitrile has been developed for aerobic oxidation of activated benzylic and allylic alcohols into their corresponding aldehydes and ketones without the need for a transition metal in moderate to excellent yields with a catalytic amount of iodine. Very high inter- and intramolecular chemoselectivities are observed when benzylic OH groups are oxidized in the presence of aliphatic (nonbenzylic) hydroxyls.     

Facile coupling of propargylic, allylic and benzylic alcohols with allylsilane and alkynylsilane, and their deoxygenation with Et(3)SiH, catalyzed by Bi(OTf)(3) in [BMIM][BF(4)] ionic liquid (IL), with recycling and reuse of the IL

Allyltrimethylsilane (allyl-TMS) reacts with propargylic alcohols in the presence of 10% Bi(OTf)(3) in [BMIM][BF(4)] solvent to furnish the corresponding 1,5-enynes in respectable isolated yields (87-93%) at room temperature. The utility of Bi(OTf)(3) as a superior catalyst was demonstrated in a survey study on coupling of allyl-TMS with employing several metallic triflates (Bi, Ln, Al, Yb) as well as, B(C(6)F(5))(3), Zn(NTf(2))(2) and Bi(NO(3))(3)·5H(2)O. Coupling of cyclopropyl substituted propargylic alcohol with allyl-TMS gave the skeletally intact 1,5-enyne and a ring opened derivative as a mixture. Coupling of propargylic/allylic alcohol with allyl-TMS resulted in allylation at both benzylic (2 isomers) and propargylic positions, as major and minor products respectively. The scope of this methodology for allylation of a series of allylic and benzylic alcohols was explored. Chemoselective reduction of a host of propargylic, propagylic/allylic, bis-allylic, allylic, and benzylic alcohols with Et(3)SiH was achieved in high yields with short reaction times. The same approach was successfully applied to couple representative propargylic and allylic alcohols with 1-phenyl-2-trimethylsilylacetylene. The recovery and reuse of the ionic liquid (IL) was gauged in a case study with minimal decrease in isolated yields after six cycles.     

Development of a new triphase catalyst and its application to the epoxidation of allylic alcohols

[see reaction]. A new triphase catalyst has been developed. When an aqueous solution of H3PW12O40 (1) was added to a solution of the amphiphilic chain copolymer 2, a new self-assembled and macroporous complex 3 was formed. This complex was effective as a catalyst in the epoxidation of allylic alcohols. Even in the use of 2.7 x 10(-5) mole equiv of the catalyst, the epoxidation with aqueous H2O2 proceeded without organic solvents to give the corresponding epoxy alcohols in high yields.     

An Efficient Deprotective Method for Allylic Alcohols Protected as Methoxyethoxymethyl (MEM) And Methoxymethyl (MOM) Ethers

Methoxyethoxymethyl ethers (MEM) and methoxymethyl ethers (MOM) of allylic alcohols are readily cleaved by pyridinium paratoluenesulfonate (PPTS) in 2-butanone or t-butyl alcohol. This procedure is also efficient for deprotection of benzylic and aliphatic alcohols.     

Remarkable reactivity of pyridinium chlorochromate adsorbed on neutral alumina under solvent-free conditions

Pyridinium chlorochromate adsorbed on neutral alumina (PCC-Al₂O₃) under solvent-free conditions has been found to oxidize primary aliphatic alcohols to alkyl alkanoates whereas primary benzylic and primary allylic alcohols produce the corresponding aldehydes. Secondary aliphatic and aromatic alcohols produce ketones without isomerization and polymerization of double bonds, overoxidation and other side-reactions.     

Highly selective 1,3-isomerization of allylic alcohols via rhenium oxo catalysis

Two reaction strategies are developed to promote the highly selective 1,3-isomerization of a variety of allylic alcohols using O3ReOSiPh3 as a catalyst. The first strategy utilizes substrates whose 1,3-regioisomer contains a conjugated alkene, which relies on thermodynamics to obtain high selectivity. The second strategy employs N,O-bis(trimethylsilyl)acetamide as an additive to selectively and irreversibly remove the product from the reaction equilibrium and works well for the isomerization of tertiary allylic alcohols into primary allylic alcohols containing trisubstituted alkene components. High stereoselectivity is also observed in the 1,3-isomerization of enantioenriched allylic alcohols.     

Development and comparison of the substrate scope of Pd-catalysts for the aerobic oxidation of alcohols

[reaction: see text] Three catalysts for aerobic oxidation of alcohols are discussed and the effectiveness of each is evaluated for allylic, benzylic, aliphatic, and functionalized alcohols. Additionally, chiral nonracemic substrates as well as chemoselective and diastereoselective oxidations are investigated. In this study, the most convenient system for the Pd-catalyzed aerobic oxidation of alcohols is Pd(OAc)(2) in combination with triethylamine. This system functions effectively for the majority of alcohols tested and uses mild conditions (3 to 5 mol % of catalyst, room temperature). Pd(IiPr)(OAc)(2)(H(2)O) (1) also successfully oxidizes the majority of alcohols evaluated. This system has the advantage of significantly lowering catalyst loadings but requires higher temperatures (0.1 to 1 mol % of catalyst, 60 degrees C). A new catalyst is also disclosed, Pd(IiPr)(OPiv)(2) (2). This catalyst operates under very mild conditions (1 mol %, room temperature, and air as the O(2) source) but with a more limited substrate scope.     

A simple method for the oxidation of primary alcohols with o-iodoxybenzoic acid (IBX) in the presence of acetic acid

A simple method for the oxidation of primary alcohols to aldehydes using o-iodoxybenzoic acid (IBX) with the addition of stoichiometric acetic acid has been developed. Addition of acetic acid significantly accelerated the reaction rate. Under these conditions, primary aliphatic, benzylic, and allylic alcohols are smoothly converted to aldehydes in high yields (90-97%).     

Iron-catalyzed intramolecular allylic C-H amination

A highly selective C-H amination reaction under iron catalysis has been developed. This novel system, which employs an inexpensive, nontoxic [Fe(III)Pc] catalyst (typically used as an industrial ink additive), displays a strong preference for allylic C-H amination over aziridination and all other C-H bond types (i.e., allylic > benzylic > ethereal > 3° > 2° ? 1°). Moreover, in polyolefinic substrates, the site selectivity can be controlled by the electronic and steric character of the allylic C-H bond. Although this reaction is shown to proceed via a stepwise mechanism, the stereoretentive nature of C-H amination for 3° aliphatic C-H bonds suggests a very rapid radical rebound step.     

TfOH/Fe(OTf)3 Cocatalyzed Reaction of Arylallenes with Alcohols for Structurally Diverse Indene Derivatives

The indene moiety is an important unit because of its presence in many chemical catalysts, functional materials and biologically relevant molecules. Herein, we report a facile reaction of arylallenes with benzylic or allylic alcohols through TfOH/Fe(OTf)₃ cocatalyzed cleavage of sp³ carbon‐oxygen. In the presence of 5 mol% TfOH and 5 mol% Fe(OTf)₃, a range of arylallenes undergo carbocation initiated cyclization reaction with alkyl alcohols to give structurally diverse polysubstituted indenes in good to excellent yields. H₂O is the sole byproduct that makes this transformation highly atom‐economic and environmentally benign.     

Oxygen transfer from sulfoxides: oxidation of alkylarenes catalyzed by a polyoxomolybdate, [PMo12O40]3-

The polyoxomolydate of the Keggin structure, PMo12O403-, catalyzes, under anaerobic conditions, oxygen transfer from sulfoxides to alkylarenes such as xanthene and diphenylmethane to yield xanthen-9-one and benzophenone, respectively. With use of 17O and 18O labeled phenylmethylsulfoxide it was shown that the sulfoxide is complexed by the polyoxometalate and the oxygen is transferred from the sulfoxide to the alkylarene. There is a good correlation between the reaction rate and the heterolytic benzylic C-H bond energy indicating a hydride transfer reaction from the alkylarene to the polyoxometalate-sulfoxide complex. In the case of triphenylmethane the resulting carbocation reacts to yield 9-phenylfluorene as the major product. The reaction kinetics supports such a reaction pathway.     

Magtrieve™: a convenient catalyst for the oxidation of alcohols

We find that Magtrieve™ (CrO₂) catalyzes the oxidation of a wide variety of alcohols with periodic acid as the terminal oxidant. Mild conditions, short reaction times, and facile aqueous work-up make this a most attractive method. Olefins are not oxidized under these conditions; thus alcohols react selectively in the presence of alkenes. Conditions have been optimized with respect to catalyst loading, solvent, and co-oxidant; and the scope of the reaction includes primary and secondary benzylic, allylic, and aliphatic alcohols.     

A very mild and chemoselective oxidation of alcohols to carbonyl compounds

Efficient oxidation of primary alcohols and beta-amino alcohols to the corresponding aldehydes and alpha-amino aldehydes can be carried out at room temperature and in methylene chloride, using trichloroisocyanuric acid in the presence of catalytic TEMPO: aliphatic, benzylic, and allylic alcohols, and beta-amino alcohols are rapidly oxidized without no overoxidation to carboxylic acids. Secondary carbinols are slowly oxidized so that the reaction is highly chemoselective. Reaction: see text.     

A nano-fibrillated mesoporous carbon as an effective support for palladium nanoparticles in the aerobic oxidation of alcohols "on pure water"

A novel nano-fibrillated mesoporous carbon (IFMC) was successfully prepared via carbonization of the ionic liquid 1-methyl-3-phenethyl-1H-imidazolium hydrogen sulfate (1) in the presence of SBA-15. The material was shown to be an efficient and unique support for the palladium nanoparticle (PdNP) catalyst Pd@IFMC (2) in aerobic oxidation of heterocyclic, benzylic, and heteroatom containing alcohols on pure water at temperatures as low as 40 °C for the first time and giving almost consistent activities and selectivities within more than six reaction runs. The catalyst has also been employed as an effective catalyst for the selective oxidation of aliphatic and allylic alcohols at 70-80 °C. The materials were characterized by X-ray photoelectron spectroscopy (XPS), N(2) adsorption-desorption analysis, transmission electron microscopy (TEM), and electron tomography (ET). Our compelling XPS and ET studies showed that higher activity of 2 compared to Pd@CMK-3 and Pd/C in the aerobic oxidation of alcohols on water might be due to the presence of nitrogen functionalities inside the carbon structure and also the fibrous nature of our materials. The presence of a nitrogen heteroatom in the carboneous framework might also be responsible for the relatively uniform and nearly atomic-scale distribution of PdNPs throughout the mesoporous structure and the inhibition of Pd agglomeration during the reaction, resulting in high durability, high stability, and recycling characteristics of 2. This effect was clearly confirmed by comparing the TEM images of the recovered 2 and Pd@CMK-3.     

Selective oxidation of benzylic and allylic alcohols using Mn(OAc)3/catalytic 2,3-dichloro-5,6-dicyano-1,4-benzoquinone

A practical, chemoselective oxidation of alcohols employing catalytic quantities of DDQ as the oxidant and Mn(OAc)(3) as the co-oxidant is described. Electron-rich benzylic alcohols are oxidized efficiently to their corresponding carbonyls, but less electron-rich benzylic alcohols remain unchanged. Allylic alcohols are rapidly oxidized to their corresponding aldehyde or ketone counterparts in high yields. This protocol is operationally simple, employs an inexpensive source of Mn(OAc)(3), has short reaction times, and exhibits a significant chemoselectivity favoring allylic alcohols over benzylic alcohols. This procedure also avoids the use of very large excesses of reagents and sometimes poor reproducibility that characterize previously developed reagents such as MnO(2).