New method of fluorination using potassium fluoride in ionic liquid: significantly enhanced reactivity of fluoride and improved selectivity

We have found the new nucleophilic fluorination reaction of some halo- and mesylalkanes to the corresponding fluoroalkanes with KF in the presence of [bmim][BF4] under various reaction conditions. 2-(3-Methanesulfonyloxypropoxy)naphthalene (1) was used as a model compound to optimize this fluorination reaction. Whereas the fluorination of the mesylate 1 with KF in an organic solvent such as CH3CN at 100 degrees C occurred hardly even after 24 h, the same reaction in ionic liquids, [bmim][BF4], as a reaction solvent was completed within 1.5 h, affording the wanted product 2-(3-fluoropropoxy)naphthalene 2a (85%) together with the alkene byproduct 2c (10%). Very interestingly, however, the addition of water (5 equiv) completely eliminated the formation of the undesired alkene 2c and thus gave higher yield of 2a (92%, entry 2). The use of acetonitrile as a cosolvent did not affect the reactivity of the fluorination. The presence of a proper amount of cosolvent was rather desirable (94% yield of 2a). We performed fluorination reactions with other ionic liquids ([bmim][PF6], [bmim][SbF6], [bmim][OTf], and [bmim][N(Tf)2], and two other cosolvents, to find the optimal ionic liquid and cosolvent. Nine different compounds were examined, including the 10 g-synthesis of 2-(fluoromethyl)naphthalene in 93% of isolated yield.     

Nucleophilicity in ionic liquids. 3. Anion effects on halide nucleophilicity in a series of 1-butyl-3-methylimidazolium ionic liquids

We have continued the study of halide nucleophilicity in ionic liquids, concentrating on the effect of changing the anion ([BF(4)](-), [PF(6)](-), [SbF(6)](-), [OTf](-), and [N(Tf)(2)](-)) when the cation is [bmim](+) (where bmim = 1-butyl-3-methylimidazolium). It was found that the nucleophilicities of all the halides were lower in all of the ionic liquids than in dichloromethane. Changing the anion affected the order of halide nucleophilicity, e.g., in [bmim][BF(4)] the order of nucleophilicity was Cl(-)>Br(-)>I(-) while in [bmim][N(Tf)(2)] the order was Cl(-)相似文献   

Ionic liquids/[bmim][N3] mixtures: promising media for the synthesis of aryl azides by SNAr

The nucleophilic aromatic substitution of some activated aryl or heteroaryl halides has been performed in ionic liquid solution, using the 1-butyl-3-methylimidazolium azide as a nucleophile. The reaction course was studied varying the structures of both substrates and ionic liquids. In particular, in the latter case, the reaction of 2-bromo-5-nitrothiophene was carried out in five different ionic liquids ([bmim][BF 4], [bmim][PF 6], [bmim][NTf 2], [bm 2im][NTf 2], and [bmpyrr][NTf 2]). Finally, for all the substrates considered, a comparison with data obtained in MeOH solution in the presence of NaN 3 was also performed. Data collected indicate that in some cases it is possible to obtain aromatic or heteroaromatic azide derivatives in satisfactory yield by means of a S NAr reaction using [bmim][N 3] as the nucleophile.     

Study of aromatic nucleophilic substitution with amines on nitrothiophenes in room-temperature ionic liquids: are the different effects on the behavior of para-like and ortho-like isomers on going from conventional solvents to room-temperature ionic liquids related to solvation effects?

The kinetics of the nucleophilic aromatic substitution of some 2-L-5-nitrothiophenes (para-like isomers) with three different amines (pyrrolidine, piperidine, and morpholine) were studied in three room-temperature ionic liquids ([bmim][BF4], [bmim][PF6], and [bm(2)im][BF4], where bmim = 1-butyl-3-methylimidazolium and bm(2)im = 1-butyl-2,3-dimethylimidazolium). To calculate thermodynamic parameters, a useful instrument to gain information concerning reagent-solvent interactions, the reaction was carried out over the temperature range 293-313 K. The reaction occurs faster in ionic liquids than in conventional solvents (methanol, benzene), a dependence of rate constants on amine concentration similar to that observed in methanol, suggesting a parallel behavior. The above reaction also was studied with 2-bromo-3-nitrothiophene, an ortho-like derivative able to give peculiar intramolecular interactions in the transition state, which are strongly affected by the reaction medium.     

Kemp elimination: a probe reaction to study ionic liquids properties

The amino induced elimination of benzisoxazole into the relevant o-cyanophenolate ion (Kemp elimination) has been studied in [bmim][BF 4] solution at 298 K. To have information about the interactions between reactants and ionic liquid, the reaction has been carried out at different temperatures (293-313 K). Several primary, secondary, and tertiary amines have been used to study the effect of amine structure on the reaction rate. The collected data show that the amine structure seems to have a crucial role in determining the reaction rate. Furthermore, as different cation or anion structures of an ionic liquid can significantly affect its properties, the title reaction has been performed in four different ionic liquids ([bmim][PF6], [bmim][NTf 2], [bm 2im][NTf 2], and [bmpyrr][NTf 2]), using pyrrolidine and piperidine as model amines. An H-donor negative solvent (MeOH and [bmim][NTf 2]) effect on reaction rate was detected. Finally, a narrow range of activation parameters was calculated both for the reaction induced by different amines and for pyrrolidine and piperidine, in the presence of different ILs. This fact suggests the occurrence of an "early" transition state.     

Thermodynamic modeling of the phase behavior of binary systems of ionic liquids and carbon dioxide with the group contribution equation of state

The group contribution equation of state (GC-EOS) was applied to predict the phase behavior of binary systems of ionic liquids of the homologous families 1-alkyl-3-methylimidazolium hexafluorophosphate and tetrafluoroborate with CO2. Pure group parameters for the new ionic liquid functional groups [-mim][PF6] and [-mim][BF4] and interaction parameters between these groups and the paraffin (CH3, CH2) and CO2 groups were estimated. The GC-EOS extended with the new parameters was applied to predict high-pressure phase equilibria in binary mixtures of the ionic liquids [emim][PF6], [bmim][PF6], [hmim][PF6], [bmim][BF4], [hmim][BF4], and [omim][BF4] with CO2. The agreement between experimental and predicted bubble point data for the ionic liquids was excellent for pressures up to 20 MPa, and even for pressures up to about 100 MPa, the agreement was good. The results show the capability of the GC-EOS to describe phase equilibria of systems consisting of ionic liquids.     

1-丁基-3-甲基咪唑四氟硼酸盐的热稳定性、平衡蒸汽压和标准蒸发焓

利用非等温、等温热重分析(TG)法,研究了高纯氮气气氛下1-丁基-3-甲基咪唑四氟硼酸盐([bmim][BF4])离子液体的热稳定性、平衡蒸汽压和标准蒸发焓.非等温热重(TG)曲线表明[bmim][BF4]的初始分解温度(Tonset)和最大分解速率对应的温度(Tm)分别为697和734K.然而长期等温TGA研究表明,[bmim][BF4]的最高可使用温度约为513K.另外,利用基于TG的蒸发技术研究了[bmim][BF4]的平衡蒸汽压(pe)与温度的关系并计算了标准蒸发焓.在503-543K温度范围内,离子液体[bmim][BF4]的pe和温度的关系是:lgpe=(16±1)+(-6.85±0.25)×103/T.[bmim][BF4]的标准蒸发焓为(131±5)kJ·mol-1.     

Poly(ionic liquid)s: a new material with enhanced and fast CO2 absorption

Novel sorbent and membrane materials for CO2 separation, poly(ionic liquid)s made from ionic liquid monomers, poly[p-vinylbenzyltrimethyl ammonium tetrafluoroborate](P[VBTMA][BF4]) and poly[2-(methacryloyloxy)ethyltrimethylamnonium tetrafluoroborate](P[MATMA][BF4]) have absorption capacities 7.6 and 6.0 times of those of room-temperature ionic liquids, e.g.[bmim][BF4], respectively, with reversible and fast sorption and desorption.     

A novel synthesis of pyrazolo[3,4-b]pyridine derivatives through multi-component reaction in ionic liquid

An efficient and novel procedure for the preparation of pyrazolo[3,4-b]pyridine derivatives through multi-component reaction of aldehyde, 5-amino-3-methyl-1-phenylpyrazole and malononitrile or cyanoacetate in [bmim][BF4] is described in this paper. Advantages of the method presented here include mild conditions, high yields together with a green nature and ease of recovery and reuse of the reaction medium.     

Ionic liquid induced changes in the properties of aqueous zwitterionic surfactant solution

Modifying properties of aqueous surfactant solutions by addition of external additives is an important area of research. Unusual properties of ionic liquids (ILs) make them ideal candidates for this purpose. Changes in important physicochemical properties of aqueous zwitterionic N-dodecyl- N, N-dimethyl-3-ammonio-1-propanesulfonate (SB-12) surfactant solution upon addition of hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF 4], are reported. Dynamic light scattering results indicate a dramatic reduction in the average micellar size in the presence of [bmim][BF 4]; micellar (or micelle-like) aggregation in the presence of as high as 30 wt % [bmim][BF 4] is confirmed. Responses from fluorescence probes are used to obtain critical micelle concentration (cmc), aggregation number ( N agg), and dipolarity and microfluidity of the micellar pseudophase of aqueous SB-12 in the presence of [bmim][BF 4]. In general, increasing the amount of [bmim][BF 4] to 30 wt % results in decrease in N agg and increase in cmc. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the micellar pseudophase is observed on increasing [bmim][BF 4] concentration in the solution. It is attributed to increased water penetration into the micellar pseudophase as [bmim][BF 4] is added to aqueous SB-12. It is proposed that IL [bmim][BF 4] behaves similar to an electrolyte and/or a cosurfactant when present at low concentrations and as a polar cosolvent when present at high concentrations. Electrostatic attraction between cation of IL and anion of zwitterion, and anion of IL and cation of zwitterion at low concentrations of [bmim][BF 4] is evoked to explain the observed changes. Presence of IL as cosolvent appears to reduce the efficiency of micellization process by reducing the hydrophobic effect.     

A Novel Green Preparation of a, a''''-Bis (substituted benzylidene)-cycloalkanones Promoted by FeCl_3 6H-2O in Ionic Liquid

a, a'-Bis(substituted benzylidene)cycloalkanones were efficiently prepared from cycloalkanones and benzaldehydes in [bmim][BF4] by using iron(III) chloride hexahydrate as a catalyst. It is shown that [bmim][BF4] and iron(III) chloride hexahydrate can be quantitatively recovered and be reused effectively for many times. Compared with the known methods, this novel process has the advantage of being an envkonmentally benign process together with good yields and mild reaction conditions.     

A Novel Green Preparation of α,α'-Bis (substituted benzylidene)-cycloalkanones Promoted by FeCl3·6H2O in Ionic Liquid

α, α'-Bis(substituted benzylidene)cycloalkanones were efficiently prepared fromcycloalkanones and benzaldehydes in [bmim][BF4] by using iron(Ⅲ) chloride hexahydrate as acatalyst. It is shown that [bmim][BF4] and iron(Ⅲ) chloride hexahydrate can be quantitativelyrecovered and be reused effectively for many times. Compared with the known methods, thisnovel process has the advantage of being an environmentally benign process together with goodyields and mild reaction conditions.     

Ionic liquid media resulted in the first asymmetric aminohalogenation reaction of alkenes

[reaction: see text] The first asymmetric aminohalogenation of functionalized alkenes has been established. The ionic liquid [bmim][BF4] was found to be the only effective media for success as normal organic solvents failed to give any product for this reaction. The reaction is also very convenient to perform by simply mixing the three reactants, cinnamates, N,N-dichloro-p-toluenesulfonamide, and catalyst, together with 4 A molecular sieves at room temperature in [bmim][BF4] in any convenient vial of appropriate size without special protection from inert gases. Good chemical yields (60-72%) and diastereoselectivities (up to 75% de) have been obtained with a good scope of substrates. The resulting individual diastereomers have been cleanly separated via column chromatography. The absolute stereochemistry of the reaction was unambiguously determined by X-ray structural analysis.     

Interactions and dynamics in ionic liquids

Precise dielectric spectra have been determined at 25 degrees C over the exceptionally broad frequency range of 0.1 相似文献   

添加中低浓度离子液体[bmim][BF4]对吐温-20临界胶束浓度和胶束结构的影响

添加离子液体会对表面活性剂在水溶液中的聚集行为产生重要影响。本文研究了吐温-20在中低浓度离子液体四氟硼酸1-丁基-3-甲基咪唑鎓([bmim][BF_4])中的胶束化行为。随着[bmim][BF_4]浓度(cIL)从0增加到0.2mol·L~(-1),吐温-20的临界胶束浓度逐渐增大。相比cIL0.05mol·L~(-1),在cIL0.05mol·L~(-1)时加入[bmim][BF_4]使吐温-20临界胶束浓度增大得更加显著。吐温-20胶束聚集数随着离子液体浓度的增加而逐渐减小,这一结果也说明加入离子液体会对吐温-20胶束的生成有抑制作用。吐温-20胶束化热力学研究表明,吐温-20在不同浓度离子液体中的胶束化是熵、焓共同驱动,并具有熵-焓补偿性。随着离子液体浓度的增加,吐温-20胶束平均粒径和胶束微粘性均表现出先增大后减小的变化,在cIL=0.05mol·L~(-1)时达到最大值。     

Thermal effect on C-H stretching vibrations of the imidazolium ring in ionic liquids

We have studied temperature dependent IR spectra of the C-H stretching modes of the imidazolium ring in [bmim][PF(6)], [bmim][Tf(2)N], [emim][Tf(2)N], [hmim][Tf(2)N], and [bmim][BF(4)]. Temperatures in this study are from 278 to 348 K at an interval of 10 K. Spectra of the C-H stretching modes have been deconvoluted using our previous computer program of the Voigt-lineshape function. Frequency shifts, Lorentzian spectral widths, and band absorbance were examined as a function of temperature. In order to interpret the observed behaviors, we have developed a simple mechanical model as well as a chemical equilibrium model. The model analyses suggest that enthalpy changes for the cluster and/or ion-pair breaking reactions in the liquid state are several kJ mol(-1) endothermic, and the degree of dissociations of ion pairs or hydrogen bonded clusters is in the range from 0.3 to 0.9 with different magnitudes for the five ionic liquids.     

Synthesis of fused pyran and arylbis（4-hydroxy-6-methyl-2-oxo-2H-pyran-3-yl）methane in ionic liquid

Promoted and mediated by an ionic liquid-[bmim][BF4].fused pyrans or arylbis(4-hydroxy-6-methyl-2-oxo-2H-pyran-3-yl)methanes were efficiently and selectively prepared from the reaction of aldehyde and 4-hydroxy-6-methyl-2-oxo-pyran with or Without acetic anhydride.By using these novel procedures,pyrimidine nucleoside-fused pyran and arylbis(pyranon-3-yl)methane hybrids with potential biological activities were constructed.     

Cu(I)(bpp)]BF4: the first extended coordination network prepared solvothermally in an ionic liquid solvent

Use of an ionic liquid [bmim][BF4] (bmim = 1-butyl-3-methylimidazolium) as solvent has resulted in the first extended coordination structure, the two-dimensional network [Cu(bpp)]BF4 [bpp = 1,3-bis(4-pyridyl)propane], produced via a solvothermal route.     

Unique role of hydrophilic ionic liquid in modifying properties of aqueous Triton X-100

Modification of important physicochemical properties of aqueous surfactant solutions can be achieved by addition of environmentally benign room temperature ionic liquids (ILs). While low aqueous solubility of "hydrophobic" ILs limits the amount of IL that may be added to achieve desired changes in the physicochemical properties, hydrophilic ILs do not have such restrictions associated to them. Alterations in the key physicochemical properties of aqueous solutions of a common nonionic surfactant Triton X-100 (TX100) on addition of up to 30 wt % hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) are reported. The presence of micellar aggregates in as high as 30 wt % [bmim][BF4]-added aqueous TX100 solutions is established by dynamic light scattering and fluorescence probe behavior. Increasing the concentration of [bmim][BF4] results in decrease in average micellar size and aggregation number and increase in critical micelle concentration, indicating an overall unfavorable aggregation process. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the palisade layer of the micellar phase upon [bmim][BF4] addition implies increased water penetration and the possibility of TX100-[bmim][BF4] interactions. While the changes in some of the physicochemical properties indicate the role of [bmim][BF4] to be similar to a cosurfactant, the IL acts like a cosolvent as far as changes in other properties are concerned. Effectiveness of IL [bmim][BF4] in modifying physicochemical properties of aqueous TX100 is demonstrated.     

Palladium‐Catalyzed Enyne Cyclization of 2′‐Alkenyl 2‐Alkynoates in Imidazolium‐Type Ionic Liquids

The use of [bmim][BF₄], [bmim][PF₆], and [bmim][Cl] ILs as the solvents in Pd(II)‐catalyzed enyne cyclization of 2′‐alkenyl 2‐alkynoates in the presence of cupric chloride has been investigated. The Z/E stereoselectivity of the reaction could range from 90:10 to 4:96 by tuning the amount of LiCl in ILs. After the separation of the product, the IL–catalyst mixture could be recovered by treatment with hydrochloric acid and recycled several times without an obvious loss of catalytic activity.