Analysis of Planar Dielectric Waveguide with Mirror-Conjugate Chiralities in the Core and the Cladding

The propagation characteristics of a planar waveguide with mirror-conjugate chiralities filled in the core and the cladding (mirror-conjugate chirality waveguide) are presented. The effects of chirality on cutoff, dispersion and field distribution characteristics of the waveguide are studied. The results show that the waveguide with desired features can be made by appropriately selecting the chiralities of the core and the cladding, because the core chirality and cladding chirality have different influences on waveguide propagation characteristics.     

Analysis of a Metal-Coated Planar Dielectric Waveguide with Chiral Cladding

The propagation characteristics of a metal-coated planar waveguide with chiral media filled in the cladding are presented. The effects of chirality on cutoff, dispersion characteristics and field distributions of the waveguide are studied. The results show that cladding chirality brings phase chopping to the transverse electric field component of those modes with odd mode numbers.     

Analysis of Circular Dielectric Waveguide with Chiral Cladding

The propagation characteristics of a circular dielectric waveguide with chiral media filled in the cladding are investigated. The relation between the cutoff frequency and the chiral admittance, the dispersion curves for some modes with different angular mode numbers and the transverse distribution of fields are presented. Some new features different from the ordinary circular dielectric waveguide are resulted. The results show that the cladding chirality may lead to a single-mode operation in the circular dielectric waveguide.     

平面波导衍射特性分析

从电磁波的瑞利－索末菲标量衍射积分公式出发，利用罗兰圆结构特殊的光学性能，在平面坐标系中简化标量衍射积分公式，推导出横截面折射率阶跃分布的平面波导端口衍射场分布的计算公式，并导出常用的对称结构介质平面波导和金属平面波导端口衍射场的空间频谱，阐明平面波导端口衍射场就是驻波衍射场的本质。     

Uniform Core Field in Symmetrical Planar Waveguides and Circular Fibers with Nonlinear Claddings

1　ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｋｅｙｃｏｎｃｅｐｔｏｎｗｈｉｃｈａｌｌｎｏｎｌｉｎｅａｒｇｕｉｄｅｄｗａｖｅｏｐｔｉｃａｌｄｅｖｉｃｅｓ[1～ 3] ａｒｅｂａｓｅｄｉｓｔｈａｔｔｈｅｌｏｃａｌｉｎｔｅｎｓｉｔｙｏｆｔｈｅｇｕｉｄｅｄｗａｖｅｃｏｎｔｒｏｌｓｔｈｅｐｒｏｐａｇａｔｉｏｎｗａｖｅｖｅｃｔｏｒ ,ｔｈａｔｉｓ,ｔｈｅｆｉｅｌｄｐｒｏｆｉｌｅａｎｄｐｒｏｐａｇａｔｉｏｎｃｏｎｓｔａｎｔｃａｎｂｅｃｏｍｅ ｐｏｗｅｒｄｅｐｅｎｄｅｎｔｗｈｅｎｏｎｅｏｒｍｏｒｅ[4～ 6] ｏｆｔｈｅｌａｙｅｒｓａｒ…     

用转移矩阵法研究LNN型非线性平面光波导

用转移矩阵法数值分析了芯区和衬底为非线性介质、覆盖层为线性介质结构平面光波导的传播特性,包括TM的模场分布和功率与有效折射率之间关系的分析.解析地表达了模式本征方程和功率分布,对非线性介质中电场强度与介质非线性系数的关系进行了研究.计算结果表明,TM的模场分布和功率与有效折射率及介质的非线性系数有关.     

Study of in-line single-mode optical fiber polarizer

The theoretical calculation method of multilayer metal-clad planar optical waveguide presented by Y. YAMAMOTO is greatly improved and transplant into the optical fiber and a suitable waveguide model of in-line single-mode optical fiber polarizer is set up to study its characteristics, the theorical analyses are in accordance with the experimental re suits. The polarizer whose extinction ratio is more than 30 dB at 0.633μm wavelength with an insertion loss of 0.5 dB is formed by grinding off the cladding on one side of a single-mode fibre and evaporating metal onto the polished durface in our Lab.     

克尔型非线性薄膜波导的TE模

对于芯区为克尔型非线性介质，覆盖层和衬底为线性介质的平板波导，用Ｋｒｙｌｏｖ－Ｂｏｇｏｌｉｕｂｏｖ－Ｍｉｔｒｏｐｏｌｓｋｙ的渐近法导出了色散方程及场分布的二阶近似数学表达式，计算量大为减少且结果精确。给出了对称和非对称情况的典型实例。     

溶胶-凝胶法制备SiO2-TiO2平板光波导工艺研究

采用溶胶-凝胶法制备了SiO₂-TiO₂平板光波导,计算了平板光波导通光条件,分析了硅/钛溶胶-凝胶材料的热性能,观测了平板光波导的结构形貌,并测试了其通光损耗。结果表明：经过200℃,30 min干燥处理的凝胶薄膜呈疏松多孔状态,对于非对称平板波导,存在芯层通光截止厚度,而且当SiO₂-TiO₂芯层厚度为0.5 μm时,SiO₂下包层厚度至少有6 μm才能防止1550 nm波长光泄露入单晶硅衬底中。制备的光波导对于1550 nm波长光传输损耗最小值为0.34 dB/cm。     

Surface plasmon interference pattern on the surface of a silver-clad planar waveguide as a sub-micron lithography tool

A new sub-micron photolithography tool has been realized by utilizing the interference of surface plasmon waves(SPWs) on the near surface of a silver(Ag)-clad ultraviolet(UV) planar waveguide.A laser beam with a wavelength of 325 nm was incident into the waveguide core,and suffered a series of total internal reflections on the interfaces between the waveguide core and the cladding layers.The incident light and the reflected light induced two beams of SPWs traveling in contrary directions,which interfered wi...     

Field Analysis of a Metal-Coated Planar Waveguide with Chiral Core

Eigenequations for a metal-coated planar chiral dielectric waveguide and a mirror-conjugate planar chiral dielectric waveguide are derived. The eigenequations are given in simple formulations. The results indicate that the perfect conductive (or magnetic) boundary can produce mirror-conjugate of chiral media and the left-handed and right-handed circularly polarized modes couple with each other due to the conductive boundary. The propagation characteristics of a metal-coated planar waveguide with chiral core are presented. An interesting phenomenon is observed that the field distributions vary with respect to the operating wavelength.     

Existence of negative dispersion and band gap in a helically inner cladded annular circular waveguide

Helical waveguide, a different type of waveguide structure, has been considered for analysis of modal dispersion characteristics. This paper deals with the study of a new type of annular waveguide, in which the inner cladding is made by the helical windings i.e. sheath helix and the outer cladding is as usual simple step-index cladding. Using vector approach, the general characteristic equation for the proposed waveguide has been derived. The modal dispersion characteristics for the lowest order modes for different pitch angles and thickness are determined and analyzed. We have found that there is an existence of the negative dispersion curve in the helically inner cladded annular circular waveguide. It means that the inner cladding is responsible for the negative dispersion which is generally obtained in a photonic band gap.     

The study of multilayer planar optical waveguide structure with nonlinear cladding

A novel method for analyzing the multilayer and multibranch optical waveguides with nonlinear cladding is presented. This method can also be used to analyze the multiple-quantum-well (MQW) waveguide structure. Numerical simulation results show that our analyses are reasonable.     

A theoretical study of the modal dispersion characteristics of an annular circular waveguide with helical winding as the outer cladding

In this present communication, we introduce a new type of annular optical waveguide whose outer cladding is made of sheath helix. The sheath helix is made up of the dielectric material of lower refractive index than the core materials. Using vector approach, the general characteristic equation for the proposed waveguide has been derived. The modal dispersion characteristics for the lowest-order modes for different pitch angles are determined and analyzed. We observe that there is no effect of pitch angles on dispersion curve nearly up to 89° but drastic change is observed at 90° and above pitch angle. On comparison of helically inner cladded annular circular waveguide, we have found that there is not the existence of the negative dispersion curve and photonic band gap in the helically outer cladded annular circular waveguide. It means only the inner cladding is responsible for the negative dispersion as well as photonic band gap. There is no effect of the outer cladding.     

Long period grating in/on planar and channel waveguides: A theory description

A comprehensive, complete theory suitable for a long period grating (LPG) on/in a planar or channel waveguide is described on the basis of coupled mode theory. The theory aims at key characteristic parameters with respect to the effect of the LPG, including resonance wavelength, transmission power of the guided mode in the waveguide, full-width at half-maximum (FWHM) of the power attenuation band in transmission spectrum of the guided mode, and coupling coefficient between a guided and a coupled mode. The type of the grating including relief and index modulation, different polarization state combinations of the guided mode and the resonant mode, and slanted grating structure are considered in this theory. The influences of the coupling between two guided modes and between a guided mode and a substrate mode are discussed. The role of cladding layer in a long period waveguide grating is demonstrated in particular. Finally, the expressions for the sensitivity of resonance wavelength as a function of external temperature, pressure and surrounding refractive index are derived.     

多层介质波导的一种新方法及其在非均匀介质平面光波导中的应用

本文提出求解多层介质平面光波导的一个简单而直接的方法。将其应用于非均匀平面光波导,可以求解任意折射率分布和TM模问题。以抛物线型和指数型分布为例,说明只要分层数目足够多,本文介绍的方法可以达到任意精度。     

Waveguide Array Wavelength Router Design to Improve Insertion Loss Uniformity

We propose a wavelength router design to improve insertion loss uniformity. Branched waveguides are placed at junctions between the waveguide array and a planar waveguide. The diffracted light injected into planar waveguides is forwarded in different directions. At the image plane of the planar waveguide, a flat top envelope is attained to ensure loss uniformity among output ports.     

Multi-layer cladding leaky planar waveguide for high-power applications

We design a multi-layer cladding large-core planar waveguide that supports a single guided mode. The waveguide works on the principle of higher-order mode discrimination. The cladding of the waveguide is formed by alternate low- and high- index regions, which helps leaking out of higher-order modes while retaining the fundamental mode over the entire length of the waveguide. The structure is analyzed by the transfer-matrix method and the leakage losses of the modes have been calculated. We show that a waveguide formed in silica with numerical aperture 0.24 and core width 10 μm can be designed to exhibit single-mode operation at 1550-nm wavelength. Such a structure should find applications in high-power planar waveguide lasers and amplifiers.     

基于平板波导的小型红外光栅光谱仪光学设计

为实现红外光谱仪器的小型化,通过分析现有小型光谱仪,提出了一种基于平板波导的小型红外光栅光谱仪的设计方法。平板波导光谱仪的小型化原理与一般的微小型光谱仪不同。在平板波导光谱仪中,光束被限制在一层薄薄的平板波导介质中传播,看起来像是整个光学系统被压扁了。在垂直于平板波导的方向上光学元件的尺寸可以做到很小,从而显著减小光学系统的尺寸。该系统的设计可分为Czerny-Turner结构设计、波导结构设计。先根据像差理论设计Czerny-Turner结构,目标是保证光谱分辨率及校正像差;然后根据几何光学理论设计波导结构,包括平板波导和两个柱面透镜,目标是压缩光束并校正像散;最后将它们输入Zemax软件中进行综合优化,以获得最优的光学系统。据此方法设计了一个平板波导红外光栅光谱仪,工作波段为8~12 μm,数值孔径为0.22,采用线阵探测器。通过Zemax软件对结果进行分析和评价,表明仪器光学系统的尺寸为130 mm×125 mm×20 mm,工作波段内光谱分辨率达到80 nm,满足设计指标要求。证明了该优化设计方法是可行的,所得系统尺寸小、性能高。     

平板波导谐振腔耦合损失的厄米高斯展开分析法

平板波导内的场按自由空间传播的厄米高斯函数展开，计算了平板波导谐振腔的耦合损失，给出了平板波导中ＥＨ１１模的耦合损失与球镜的曲率及位置的关系。结果表明存在两种特定的结构使耦合损失最小。