Preferential solvation stabilization for hydrophobic polymeric nanoparticle fabrication

Preferential solvation of polymer molecules and strong EPD-EPA (EPD, electron pair donor; EPA, electron pair acceptor) interaction between solvent and nonsolvent molecules were found to be of great significance in the fabrication of two kinds of aromatic polyimide (AP) nanoparticles. Surfactant free yet stable AP nanoparticles were prepared using a liquid-liquid phase separation method. The stability of the AP nanoparticles can be achieved by the solvation multilayer resulting from a solvation stabilization chain in the form of nonsolvent --> solvent --> AP (a --> b denotes that component b is solvated by component a). The significance of this stabilization chain was identified by many comparative experiments using different types of molecular probes. On the other hand, the formation of AP nanoparticles was found to be governed by a nucleation process and therefore the particle size is controlled by the nucleation rate. A very high level of supersaturation can be attained under the intensive local motions induced by ultrasound, resulting in a very high nucleation rate. This effect was found to be extremely useful in the fabrication of sub-50 nm AP nanoparticles.     

Steric stabilization of core-shell nanoparticles in liquid carbon dioxide at the vapor pressure

Nondilute nanoparticle dispersions were stabilized in liquid CO2 at 25 degrees C at pressures as low as the vapor pressure for greater than 30 min. By modifying hydrophilic silica with a trifunctional silylating agent, (heptadecafluoro-1,1,2,2-tetrahydrodecyl)triethoxy silane, a cross-linked polymer shell was formed around the silica core. The presence of the shell led to weaker Hamaker interactions between approaching fluoro-silica composite particles and enabled dispersibility at weaker solvent conditions (low pressures) than for metals with larger Hamaker constants. Steric stabilization of the nanoparticles was provided by low-molecular-weight perfluorodecane side chains at the surface of the fluoro-silica composite shell. Compared to polymeric chains, the perfluorodecane side chains are more easily solvated and thus stabilize nanoparticle dispersions in CO2 at much lower pressures, even down to the vapor pressure.     

Organic carbonates as stabilizing solvents for transition-metal nanoparticles

Biodegradable, non-toxic, "green" and inexpensive propylene carbonate (PC) solvent is shown to function as a stabilizing medium for the synthesis of weakly-coordinated transition-metal nanoparticles. Kinetically stable nanoparticles (M-NPs) with a small and uniform particle size (typically <5 ± 1 nm) have been reproducibly obtained by easy, rapid (3 min) and energy-saving 50 W microwave irradiation under an argon atmosphere from their metal-carbonyl precursors in PC. The M-NP/PC dispersions are stable for up to three weeks according to repeated TEM studies over this time period. The rhodium nanoparticle/PC dispersion is a highly active catalyst for the biphasic liquid-liquid hydrogenation of cyclohexene to cyclohexane with activities of up to and 1875 (mol product) (mol Rh)(-1) h(-1) and near quantitative conversion at 4 to 10 bar H(2) and 90 °C. From the PC dispersion the M-NPs can be coated with organic capping ligands such as 3-mercaptopropionic acid or trioctylphosphine oxide for further stabilization.     

Liquid-liquid phase-transfer of magnetic nanoparticles in organic solvents

We report a novel route for the preparation of well-defined colloidal dispersions of magnetic nanoparticles stabilized by steric repulsion in organic solvents. The usual methods standardly lead to the surfaction of multiparticle aggregates, incompatible with our long-term aim of studying and modeling the influence of magnetic dipolar interactions in colloidal dispersions which are free of aggregates, all other interactions being perfectly defined. A new and reproducible method based on a surfactant-mediated liquid-liquid phase transfer of individually dispersed gamma-Fe(2)O(3) nanoparticles from an aqueous colloidal dispersion to an organic phase is developed. The choice of the reagent and the preparation techniques is discussed. Among several solvent/surfactant pairs, the cyclohexane/dimethyldidodecylammonium bromide (DDAB) system is found to fulfill the colloidal stability criterion: aggregation does not appear, even upon aging. A complete transfer of isolated particles is observed above a threshold in DDAB concentration. The nanoparticle surface is then fully covered with adsorbed DDAB molecules, each surfactant head occupying a surface of 0.57+/-0.05 nm(2). The volume fraction of the cyclohexane-based organosols is easily tunable up to a volume fraction of 12% by modifying the volume ratio of the organic and of the aqueous phases during the liquid-liquid phase transfer.     

Tunable solvation effects on the size-selective fractionation of metal nanoparticles in CO2 gas-expanded solvents

This paper presents an environmentally friendly, inexpensive, rapid, and efficient process for size-selective fractionation of polydisperse metal nanoparticle dispersions into multiple narrow size populations. The dispersibility of ligand-stabilized silver and gold nanoparticles is controlled by altering the ligand tails-solvent interaction (solvation) by the addition of carbon dioxide (CO2) gas as an antisolvent, thereby tailoring the bulk solvent strength. This is accomplished by adjusting the CO2 pressure over the liquid, resulting in a simple means to tune the nanoparticle precipitation by size. This study also details the influence of various factors on the size-separation process, such as the types of metal, ligand, and solvent, as well as the use of recursive fractionation and the time allowed for settling during each fractionation step. The pressure range required for the precipitation process is the same for both the silver and gold particles capped with dodecanethiol ligands. A change in ligand or solvent length has an effect on the interaction between the solvent and the ligand tails and therefore the pressure range required for precipitation. Stronger interactions between solvent and ligand tails require greater CO2 pressure to precipitate the particles. Temperature is another variable that impacts the dispersibility of the nanoparticles through changes in the density and the mole fraction of CO2 in the gas-expanded liquids. Recursive fractionation for a given system within a particular pressure range (solvent strength) further reduces the polydispersity of the fraction obtained within that pressure range. Specifically, this work utilizes the highly tunable solvent properties of organic/CO2 solvent mixtures to selectively size-separate dispersions of polydisperse nanoparticles (2 to 12 nm) into more monodisperse fractions (+/-2 nm). In addition to providing efficient separation of the particles, this process also allows all of the solvent and antisolvent to be recovered, thereby rendering it a green solvent process.     

Effective potentials between nanoparticles in suspension

Results of molecular dynamics simulations are presented for the pair distribution function between nanoparticles in an explicit solvent as a function of nanoparticle diameter and interaction strength between the nanoparticle and solvent. The effect of including the solvent explicitly is demonstrated by comparing the pair distribution function of nanoparticles to that in an implicit solvent. The nanoparticles are modeled as a uniform distribution of Lennard-Jones particles, while the solvent is represented by standard Lennard-Jones particles. The diameter of the nanoparticle is varied from 10 to 25 times that of the solvent for a range of nanoparticle volume fractions. As the strength of the interactions between nanoparticles and the solvent increases, the solvent layer surrounding the nanoparticle is formed which increases the effective radii of the nanoparticles. The pair distribution functions are inverted using the Ornstein-Zernike integral equation to determine an effective pair potential between the nanoparticles mediated by the introduction of an explicit solvent.     

Solvation structure and dynamics for passivated Au nanoparticle in supercritical CO2: a molecular dynamic simulation

All-atomic molecular dynamics simulations have been performed to study the interfacial structural and dynamical properties of passivated gold nanoparticles in supercritical carbon dioxide (scCO(2)). Simulations were conducted for a 55-atom gold nanocore with thiolated perfluoropolyether as the packing ligands. The effect of solvent density and surface coverage on the structural and dynamical properties of the self-assembly monolayer (SAM) has been discussed. The simulation results demonstrate that the interface between nanoparticle and scCO(2) solvent shows a depletion region due to the preclusion of SAM. The presence of scCO(2) solvent around the passivated Au nanoparticle can lead to an enhanced extension of the surface SAM. Under full coverage, the structure and conformation of SAM are insensitive to the density change of scCO(2) fluid. This simulation results clarify the microscopic solvation mechanism of passivated nanoparticles in supercritical fluid medium and is expected to be helpful in understanding the scCO(2)-based nanoparticle dispersion behavior.     

Formation of organic nanoparticles by solvent evaporation within porous polymeric materials

A simple and generic method is developed to form organic nanoparticles in porous materials by solvent evaporation. The composites can be readily dissolved in water to produce aqueous organic nanoparticle dispersions.     

Long-Term Colloidally Stable Aqueous Dispersions of ≤5 nm Spinel Ferrite Nanoparticles

Applications in biomedicine and ferrofluids, for instance, require long-term colloidally stable, concentrated aqueous dispersions of magnetic, biocompatible nanoparticles. Iron oxide and related spinel ferrite nanoparticles stabilized with organic molecules allow fine-tuning of magnetic properties via cation substitution and water-dispersibility. Here, we synthesize≤5 nm iron oxide and spinel ferrite nanoparticles, capped with citrate, betaine and phosphocholine, in a one-pot strategy. We present a robust approach combining elemental (CHN) and thermal gravimetric analysis (TGA) to quantify the ratio of residual solvent molecules and organic stabilizers on the particle surface, being of particular accuracy for ligands with heteroatoms compared to the solvent. SAXS experiments demonstrate the long-term colloidal stability of our aqueous iron oxide and spinel ferrite nanoparticle dispersions for at least 3 months. By the use of SAXS we approved directly the colloidal stability of the nanoparticle dispersions for high concentrations up to 100 g L⁻¹.     

Effective interactions in mixtures of silica microspheres and polystyrene nanoparticles

We investigate the effect of small concentrations of highly charged nanoparticles on the stability of uncharged colloidal microspheres using large-scale simulations. Employing pair potentials that accurately represent mixtures of silica microspheres and polystyrene nanoparticles as studied experimentally, we are able to demonstrate that nanoparticle-induced stabilization can arise from a relatively weak van der Waals attraction between the colloids and nanoparticles. This demonstrates that the nanoparticle haloing mechanism for colloidal stabilization is of considerable generality and potentially can be applied to large classes of systems. The range of optimal nanoparticle concentrations can be tuned by controlling the attraction between colloids and nanoparticles.     

Characterization of poly(methyl methacrylate) nanoparticles prepared by nanoprecipitation using analytical ultracentrifugation,dynamic light scattering,and scanning electron microscopy

Nanoprecipitation represents an effective method for the production of polymeric nanoparticles. This technique was used to prepare nanoparticles from solutions of poly(methyl methacrylate) and its copolymers. Since the regulation of main parameters like particle size, particle size distribution, and molar particle mass is very important for future applications, the stable nanoparticle dispersions were examined by scanning electron microscopy, velocity sedimentation, and dynamic light scattering, whereby advantages and disadvantages of each characterization techniques are discussed. Polydispersities of particle size distributions are determined by the ratio of d_w/d_n, where d_w and d_n are weight‐ and number‐average diameters, respectively. The particle characteristics strongly depend on the chemical structure of the polymers and the way of preparation and, therefore, vary in the studied cases in the range of 6 < d_w < 680 nm, whereas the polydispersity index d_w/d_n changes in the range of 1.02 to 1.40. It is shown that nanoparticles in a desirable size range can be prepared by solvent–nonsolvent methods (dialysis technique or dropping technique). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3924–3931, 2010     

Molecular dynamics simulation of the forces between colloidal nanoparticles in n-decane solvent

Molecular dynamics is utilized to simulate solvation forces between two nanoparticles immersed in liquid n-decane. Three types of solvophilic nanoparticles are investigated with sizes in the 1-6 nm range: small and large amorphous spheres and crystalline cubes. We find that the solvation forces are negligible for the small spheres, which have diameters comparable to the end-to-end distance of all-trans decane, and we attribute this to the inability of the small spheres to induce decane ordering in the interparticle gap. The cubic nanoparticles (and to a lesser extent, the large spheres) are able to induce the formation of solidlike, n-decane layers in their gap for certain nanoparticle separations, and the transition between layered and disordered structures leads to solvation forces that oscillate between repulsion and attraction as the nanoparticle separation is varied. We find that the Derjaguin approximation [B. V. Derjaguin, Kolloid-Z. 69, 155 (1934)] is not effective at describing the dependence of the solvation forces on nanoparticle size and shape-contrasting results from a previous study involving these nanoparticles in Lennard-Jones solvent [Y. Qin and K. A. Fichthorn, J. Chem. Phys. 119, 9745 (2003)]. In particular, we find that for decane, the magnitude of the repulsive solvation forces is sensitive to nanoparticle size and shape, a phenomenon we attribute to the size and rigid-rod structure of n-decane, which makes its ordering in the interparticle gap sensitive to the size and the surface roughness of the nanoparticles.     

Structure and electrophysical properties of self-organized composite layers based on peptide and silver nanoparticles

Atomic force microscopy, scanning tunnel microscopy, and IR spectroscopy are employed to study composite films formed from dispersions of silver nanoparticles in an aqueous solution of Asp-Glu-Val-Asp-Trp-Phe-Asp peptide on different substrates at room temperature. It is established that pure peptide crystallizes on substrates to yield different structures, the character of which essentially depends on the chemical nature of a substrate, method of its pretreatment, and solution pH. When films are formed from dispersions containing both silver nanoparticles and peptide, globular structures are formed, in which individual nanoparticles are included into a peptide matrix. It is established that, during the reduction of silver ions and stabilization of resulting nanoparticles, peptide bonds are partly ruptured and another isomeric form (cisconfiguration) of peptide molecules is realized in the silver nanoparticle dispersion in its solution. Distributions of the surface potential and local tunnel voltage-current characteristics are measured for the composite layers. The voltage-current characteristics of all examined composite layers are essentially nonlinear. It is established that the charge transfer in the composite and pure peptide layers is carried out via the Poole-Frenkel mechanism and the Schottky overbarrier emission, respectively.     

Formation of gold nanoparticles in aqueous solutions of cellulose derivatives and a study of the properties of these nanoparticles

It was demonstrated that gold nanoparticles can be obtained by using cellulose ethers, methyl hydroxyethyl cellulose and carboxymethylcellulose as reducing agents and also as nanoparticle stabilizers. IR spectral studies revealed a difference between the mechanisms of reduction and nanoparticle stabilization by these cellulose derivatives. A scanning tunnel microscope was used to examine composite films formed from nanoparticle dispersions on the surface of polycrystalline gold films. It was demonstrated that, in the case of gold nanoparticles, densely packed globular structures are formed in a carboxymethyl cellulose solution. A fibril-like structure of layers is formed in the Au+(methyl hydroxyethyl cellulose) system.     

Homogeneous functional Ni-P/ceramic nanocomposite coatings via stable dispersions in electroless nickel electrolytes

Stable nanoparticle dispersions in concentrated electrolytes are prerequisite for a variety of advanced nanocomposites prepared by deposition techniques. In this work we investigate the synthesis of electroless Ni-P/functional ceramic coatings from concentrated electrolytes containing functional nanoparticles such as TiO(2), α-Fe(2)O(3), ITO, and CeO(2). Stable nanoparticle dispersions in both low and high phosphorus electrolytes are achieved at plating temperatures (80-90 °C) by a generalized scheme employing comb-polyelectrolyte and antifreeze additives. Dispersion stability at room temperature is achieved in both low and high phosphorus EN media using anionic comb-polyelectrolyte surfactants with polyether side chain of 1100 g/mol. The optimal surfactant concentration is determined by zeta-potential and thermo-gravimetric analysis. Without additives the dispersions flocculate and sediment between 65 and 80 °C. Such phenomenon is believed to be associated with a critical flocculation temperature (CFT). The CFT is also weekly dependent on the particle type and the high ionic strength media. Addition of antifreeze additives such as propylene glycol and urea to the dispersions restores stability and increase the CFT for all particles. We estimate an average increase of the CFT by 1.5-2 °C per 1% additive for all particles and electrolytes. While the particle stabilization scheme is generalized in this work, the composite EN plating proved highly dependent on particle type. Baths containing ITO nanoparticles showed no plating reactions and those containing α-Fe(2)O(3) no nanoparticle co-deposition. In contrast, homogeneous Ni-P/TiO(2) and Ni-P/CeO(2) nanocomposites with up to 22 vol.% nanoparticles are produced. The possible application of the stabilization principles developed here for other functional nanocomposite systems is discussed.     

Membrane emulsification and solvent pervaporation processes for the continuous synthesis of functional magnetic and Janus nanobeads

We discuss the integration of membrane emulsification and pervaporation processes for the continuous production of functional materials, such as silica-encapsulated magnetite nanoparticle clusters and asymmetric Janus nanoparticles, by the emulsion droplet solvent evaporation method, which has traditionally been performed in small-scale batch systems. An organic solvent containing primary magnetite nanoparticles (～10 nm) coated with oleic acid was dispersed in a continuous aqueous phase by membrane emulsification, which enabled the consistent production of nanoparticle-laden solvent droplets of well-controlled size with narrow size distributions. The solvent was removed from the emulsion by pervaporation. Prior to complete solvent removal, the nanoparticle packing density within the clusters was a function of the residence time in the pervaporation unit. The final clusters formed, ～100-300 nm in size, exhibited the same superparamagnetic behavior as the primary nanoparticles, and were stable in aqueous media with a zeta potential of -70 mV at neutral pH. A facile method was used to coat the nanoclusters with a silica shell, providing sites for surface functionalization with a range of organic ligands. The nanoparticles and clusters were analyzed by a variety of techniques, including TGA, DLS, TEM, EDS, and SQUID. The effects of various parameters, such as the membrane dimensions and flow rate through the unit, on the mass transport rates were elucidated through a parametric modeling study. The applicability of the methods to the production of polymeric beads and more complex particles was demonstrated; to create Janus structures, organic polymer solutions were dispersed as droplets in continuous aqueous phases, and the solvent was subsequently evaporated. The Janus particles consisted either of polymeric cores with magnetite nanoparticles clustered as islands on their surfaces, or of two phase-separated polymers, each constituting half of any given polymeric particle.     

System Maps for XTerra MS C18: Effect of Solvent Type on Selectivity in Reversed-Phase Liquid Chromatography

The solvation parameter model is used to establish the contribution of cohesion, dipole-type and hydrogen-bonding interactions to the retention mechanism on an XTerra MS C₁₈ stationary phase with acetonitrile-water, methanol-water and tetrahydrofuran-water mobile phases containing from 10 to 70% (v/v) organic solvent. Solute size and electron lone pair interactions are responsible for retention while dipole-type and hydrogen-bonding interactions result in lower retention. The volume fraction of water in the mobile phase plays a dominant role in the retention mechanism. However, the change in values of the system constants of the solvation parameter model cannot be explained entirely by assuming the principle role of the organic solvent is to act as a diluent for the mobile phase. Selective solvation of the stationary phase by the organic solvent and the ability of the organic solvent to extract water into the stationary phase, and/or the absorption of water-organic solvent complexes by the stationary phase, are important in accounting for the details revealed about the retention mechanism by the solvation parameter model. A qualitative picture of the above solvent effects, compatible with current knowledge of solvent and stationary phase properties, is presented.     

Fabrication of highly refractive BaTiO3 nanocomposite films using heat resistant polymer as matrix

Highly refractive, heat-resistant BaTiO₃ nanocomposite films were fabricated via in situ polymerization to homogeneously disperse barium titanate (BT) nanoparticles into polyimide (PI) matrix. BT nanoparticles surface-modified with O-phosphorylethanol phthalimide (PPHI) were employed to the in situ polymerization in which condensation reactions of a diphthalic anhydride and a diamine were conducted to form the prepolymer of poly(amic acid) (PAA) that was thermally imidized in the following step. The nanoparticles surface-modified were added to PAA solution at different times in the polymerization to examine the effect of PAA molecular weight on the refractive index (RI) of the nanocomposite films, which indicated that relatively low molecular weights (<10,000) of PAA formed at the point of nanoparticle addition was appropriate for enhancement of nanocomposite RI. An additional treatment of chemical imidization using acetic acid anhydride and pyridine, which was followed by the thermal imidization, was performed to examine the effect of polyimide structure on RI of nanocomposite films. The RI of nanocomposite films with excellent thermal stability could be successfully enhanced to n = 1.88 by the chemical imidization.     

Synthesis and Characterization of Poly(ether-block-amide) Membranes

Poly(ether-block-amide) membranes were made via casting a solution on a nonsolvent (water) surface. In this research, effects of different parameters such as ratio of solvent mixture (n-butanol/isopropanol), temperature, composition of coagulation bath (water) and polymer concentration, on quality of the thin film membranes were studied. The mechanism of membrane formation involves solution spreading, solvent–nonsolvent exchange, and partial evaporation of the solvent steps. Solvent- nonsolvent exchange is the main step in membrane formation and determines membrane morphology. However, at higher temperature of polymeric solution greater portion of solvent evaporates. The results showed that type of demixing process (mutual affinity between solvent and nonsolvent) has important role in film formation. Also, addition of solvent to the nonsolvent bath is effective on membrane morphology. The film quality enhances with increasing isopropanol ratio in the solvent mixture. This behavior can be related to increasing of solution surface tension, reduction of interfacial tension between solution and nonsolvent and delayed solvent-nonsolvent demixing. Uniform films were made at a temperature rang of 60–80 °C and a polymer concentration of 4–7 wt%. Morphology of the membranes was investigated with scanning electron micrograph (SEM). Pervaporation of ethyl butyrate/water mixtures was studied using these membranes and high separation performance was achieved. For ethyl butyrate/water mixtures, It was observed that both permeation flux and separation factor increase with increasing ethyl butyrate content in the feed. Increasing temperature in limited range studied resulted in decreasing separation factor and increasing permeation flux.     

Stability of polydimethylsiloxane-magnetite nanoparticle dispersions against flocculation: interparticle interactions of polydisperse materials

The colloidal stability of dispersions comprised of magnetite nanoparticles coated with polydimethylsiloxane (PDMS) oligomers was investigated theoretically and experimentally. Particle-particle interaction potentials in a theta solvent and in a good solvent for the PDMS were predicted by calculating van der Waals, electrostatic, steric, and magnetic forces as functions of interparticle separation distances. A variety of nanoparticle sizes and size distributions were considered. Calculations of the interparticle potential in dilute suspensions indicated that flocculation was likely for the largest 1% of the population of particles. Finally, the rheology of these complexes over time in the absence of a solvent was measured to probe their stabilities against flocculation as neat fluids. An increase in viscosity was observed upon aging, suggesting that some agglomeration occurs with time. However, the effects of aging could be removed by exposing the sample to high shear, indicating that the magnetic fluids were not irreversibly flocculated.