可逆加成-断裂链转移自由基聚合研究进展

RAFT(Reversible addition-fragmentation chain transfer,可逆加成-断裂链转移)自由基存在链增长自由基与链转移剂(RAFT试剂)之间的可逆蜕化转移,现已广泛应用于聚合物分子结构设计及众多功能高分子材料的合成,受到众多高分子研究者的关注,是一种发展较快的可控/活性聚合技术.本文在简要介绍了RAFT聚合发展历程基础上,综述了RAFT聚合反应机理,RAFT试剂的结构及其对聚合性能的影响,RAFT试剂与单体的匹配性,RAFT聚合实施方法等.同时也对RAFT聚合反应的发展进行了展望.     

可逆加成-断裂链转移自由基聚合研究进展

综述了活性/可控自由基聚合中的可逆加成-断裂链转移(RAFT)自由基聚合研究进展;总结了RAFT试剂、RAFT聚合反应条件、RAFT聚合物及其结构形貌的最新研究进展;指出RAFT自由基聚合反应已被作为重要方法之一用于合成具有特定分子结构的聚合物.     

4-PEG接枝苯乙烯-马来酸酐交替共聚物的合成及功能化

采用普通自由基聚合和可逆加成一断裂链转移（RAFT）自由基聚合方法合成了对位PEG取代苯乙烯（PEG-g-St）和马来酸酐的交替共聚物（P（（PEG—g—St）-alt-MA））,”CNMR分析表明PEG-g-St和马来酸酐单元采取交替的序列结构．利用反应性基团-马来酸酐单元的水解以及胺解可以制备功能性的PEG聚合物．以月桂胺为模型小分子研究了该聚合物的胺解,得到4-PEG-苯乙烯与羧酸基团以及疏水烷烃的交替序列聚合物,该双亲聚合物在水溶液中形成组装体．     

可逆加成—断裂链转移自由基聚合在制备水溶性聚合物中的应用

水溶性聚合物在工业、农业、医药等领域都有着广泛用途,但随着近年对水溶性聚合物精细化的要求,寻找新的结构可控的聚合方法已成为迫切需求.由于可逆加成-断裂链转移(RAFT)自由基聚合具有适用单体范围广、反应条件温和、不受聚合方法的限制等优点,以及可控制聚合物的嵌段、接枝、梳型、星型、无规及梯度等结构,成为合成结构可控的水溶性聚合物的最有效手段之一.本文主要讨论了单体、引发剂、链转移剂、溶剂等组成对RAFT聚合反应的影响,并介绍了利用RAFT方法制备非离子、阴离子、阳离子及两性离子水溶性聚合物的实例.     

含氟丙烯酸酯与苯乙烯共聚物的RAFT合成及表征

通过可逆加成-断链链转移(RAFT)溶液聚合,以三硫代碳酸酯为RAFT试剂,偶氮二异丁腈(AIBN)为引发剂,1,4-二氧六环为溶剂,制备甲基丙烯酸(2,2,2-三氟)乙酯(TFEMA)和苯乙烯(St)共聚物.详细研究了不同引发剂的用量、RAFT试剂与引发剂摩尔比以及聚合温度等实验条件对聚合反应过程的影响.通过GPC、FTIR测试共聚物的分子量、分子量分布和分子结构,并用静态接触角仪和AFM分别表征聚合物膜的接触角、表面能及膜的表面形貌.     

苯乙烯与N-取代马来酰亚胺的可逆加成-断裂链转移交替共聚合

研究了二硫代苯甲酸酯存在下偶氮二异丁腈引发苯乙烯(St)、St与N-对羟基苯基马来酰亚胺(HPM)、St与N-对(2-氯/溴丙酰氧基)苯基马来酰亚胺(CPPM/BPPM)的可逆加成-断裂链转移(RAFT)均/共聚,聚合物的结构由紫外-可见光(UV-Vis)与凝胶渗透色谱(GPC)表征.结果表明,St的RAFT均聚以及St与N-取代马来酰亚胺的RAFT共聚均呈现活性聚合特征,分子量随着转化率上升而增加,且分子量分布较窄.对于St的RAFT均聚,由于双基终止,聚苯乙烯(PSt)链中"戴帽效率"随着转化率上升逐渐下降.对于St与N-取代马来酰亚胺的RAFT共聚合,电荷转移复合物的形成显著地提高了共聚反应速度,并促进交替结构的形成.随后进行了以P(St-alt-BPPM)引发St的原子转移自由基聚合以制备梳型PSt,结果表明在强极性溶剂中进行的聚合过程失去可控性,所得产物分子量极宽,而在本体聚合中所得聚合物分子量相对较窄,有一定的可控性.     

可逆加成-断裂链转移(RAFT)聚合在星形聚合物合成中的应用

可逆加成-断裂链转移(RAFT)聚合作为一种新型活性自由基聚合,由于其具有单体适用面广、操作条件温和、实施聚合的方法多--本体、溶液、乳液、悬浮聚合均可的优点已经在分子设计方面取得了广泛的应用.星形聚合物作为一种特殊结构的聚合物,由于其具有较低的结晶度、较小的流体动力学体积等独特的性质,越来越引起研究者的重视.本文综述了近几年来采用RAFT法合成星形聚合物的研究进展.根据合成星形聚合物所用的RAFT多官能团试剂种类,对RAFT法合成星形聚合物的反应进行了分类.     

RAFT试剂N-咔唑二硫代甲酸1,4-对二甲基苯双酯的合成及应用

以咔唑和对二氯甲基苯为原料, 合成了以咔唑为Z基团的双功能团RAFT聚合链转移试剂N-咔唑二硫代甲酸1,4-对二甲基苯双酯(PXCBD). 以PXCBD为链转移试剂, 以苯乙烯、丙烯酸甲酯及N,N-二丁基丙烯酰胺为单体, 考察了PXCBD在RAFT聚合中合成多嵌段共聚物上的应用, 并研究了PXCBD及由其合成的聚合物的荧光特性. 研究结果表明, PXCBD是一种性能优异的双功能团RAFT聚合链转移试剂, 可用于合成特殊结构并且带有荧光标识的功能高分子材料.     

以2,4-二苯基-4-甲基-1-戊烯为链转移剂的苯乙烯自由基聚合

以２,４ 二苯基 ４ 甲基 １ 戊烯（αＭＳＤ）为链转移剂,采用与环境友好的本体自由基聚合法及悬浮自由基聚合法合成了重均分子量Ｍｗ＝１,０００～５０,０００,分子量分布Ｍｗ／Ｍｎ≈２的苯乙烯低聚物．随着αＭＳＤ浓度的增加分子量降低效果明显,分子量分布明显变窄．热引发本体聚合物具有单端活性双键结构．     

含氟聚合物的合成进展

含氟聚合物由于其优异的化学和物理性能以及广泛的应用前景而受到关注。根据聚合反应单体结构不同,可以通过不同方法合成各种结构的含氟聚合物。这些聚合方法主要是可控／“活性”聚合,例如：原子转移自由基聚合（ATRP）、原子转移自由基一乙烯基自缩合聚合（ATR—SCVP）、可逆加成一断裂链转移聚合（RAFT）、氮氧稳定自由基聚合...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.