Easy synthesis of iron doped ordered mesoporous carbon with tunable pore sizes

Precise control of the pore sizes for porous carbon materials is of importance to study the confinement effect of metal particles because the pore size in nanosize range will decide the physical and chemical properties of the metal nanoparticles.In this paper,we report a new approach for the synthesis of iron doped ordered mesoporous carbon materials with adjustable pore size using Fe-SBA-15 as hard template and boric acid as the pore expanding reagent.The pore size can be precisely adjusted by a step of 0.4 nm in the range of 3-6 nm.The carbonization temperature can be lowered to 773 K due to the catalytic role of the doped iron.The present approach is suitable for facile synthesis of metal imbedded porous carbon materials with tunable pore sizes.     

Photochange in pore diameters of azobenzene-planted mesoporous silica materials

Azobenzene (Az) groups were planted on the pore wall of mesoporous silica MCM-41 (M41) by silylation of triethoxy[4-phenylazo(phenyl)]silane. The optimal surface density of Az groups was 0.9 group nm-2, and too much loading of Az induced the lowering of the efficiency of the trans-cis isomerization due to the congestion of the groups. The reversible change in the pore diameters upon UV-vis irradiation could not be confirmed by N2 adsorption at 77 K but was revealed to be ca. 1.0 nm by the shift of the UV-vis absorption band of p-N,N-dimethylaminobenzylidenemalononitrile introduced into the Az-modified pores.     

Study on the capacity of mesoporous alumina with different pore sizes absorb silane inhibitors

By modifying and optimizing the procedures, which were well described and understood for the synthesis of macroporous alumina, mesoporous alumina–based film has been successfully prepared, In this paper, the orderly mesoporous Al₂O₃ thin film was prepared by electrochemical workstation, and via supported N‐octyltriethoxysilane (NOS) coupling agent, corrosion inhibitors be loaded into the different pore sizes of mesoporous alumina films. The physicochemical properties of this thin inhibitors carrier film were characterized. Corrosion resistance of mesoporous alumina and honeycomb ceramic macroporous alumina were compared; the conclusion shows that mesoporous alumina film can be used as good corrosion inhibitors carrier and bring out a high‐efficiency inhibition result. Simultaneously, by compared with corrosion inhibition of different pore sizes (20‐50 nm) mesoporous alumina who absorbed NOS, and a general relationship between the different mesoporous alumina pore sizes and the adsorption capacity of NOS was obtained.     

Size-selective biocatalysis of myoglobin immobilized into a mesoporous metal-organic framework with hierarchical pore sizes

The protein myoglobin has been successfully immobilized into a mesoporous metal-organic framework with hierarchical pore sizes, which demonstrates interesting size-selective biocatalysis as well as superior catalytic activities toward small substrate oxidation compared to its mesoporous silica material counterpart.     

Heterogeneous chiral Mn(III) salen catalysts for the epoxidation of unfunctionalized olefins immobilized on mesoporous materials with different pore sizes

Two chiral Mn(III) salen complexes were immobilized onto a series of mesoporous MCM-41 and MCM-48 materials with different pore sizes and the as-synthesized catalysts were active and enantioselective for the asymmetric epoxidation of styrene and indene. The results of XRD, FTIR, DR UV-vis, and N₂ sorption showed that the chiral Mn(III) salen complexes were anchored in the channels of mesoporous materials. The influence of organic silicane dosage on the catalytic performance was studied and the optimum dosage of organic silicane for preparing heterogeneous catalysts was determined. Furthermore, the effect of the fine-tuning of pore size on the performance of heterogeneous catalysts was discussed. In general, larger pore size of the supports could lead to higher conversions and the compatible pore size with substrate may be responsible for the improved enantiomeric excess (ee) values.     

Enhancement in thermal stability and resistance to denaturants of lipase encapsulated in mesoporous silica with alkyltrimethylammonium (CTAB)

We assembled a highly durable conjugate with both a high-density accumulation and a regular array of lipase, by encapsulating it in mesoporous silica (FSM) with alkyltrimethylammonium (CTAB) chains on the surface. The activity for hydrolyzing esters of the lipase immobilized in mesoporous silica was linearly related to the concentration of lipase, whereas that of non-immobilized lipase showed saturation due to self-aggregation at a high concentration. The lipase conjugate also had increased resistance to heating when stayed in the silica coupling with CTAB. In addition, encapsulating the enzyme with FSM coupled CTAB caused the lipase to remain stable even in the presence of urea and trypsin, suggesting that the encapsulation prevented dissociation and denaturing. This conjugate had much higher activity and much higher stability for hydrolyzing esters when compared to the native lipase. These results show that FSM provides suitable support for the immobilization and dispersion of proteins in mesopores with disintegration of the aggregates.     

Effect of trace amounts of water on organic solvent transport through gamma-alumina membranes with varying pore sizes

The transport behavior of toluene and n-hexane in gamma-alumina membranes with different pore diameters was studied. It was shown that the permeability of water-lean hexane and toluene is in agreement with Darcy's law down to membrane pore diameters of 3.5 nm. The presence of molar water fractions of 5-8 x 10(-4) in these solvents led to a permeability decrease of the gamma-alumina layer by a factor of 2-4 depending on pore size. In general, a lower permeability was found for hexane than for toluene. Moreover, in the presence of water a minimum applied pressure of 0.5-1.5 bar was required to induce net liquid flow through the membrane. These phenomena were interpreted in terms of capillary condensation of water in membrane pores with a size below a certain critical diameter. This is thought to lead to substantial blocking of these pores for transport, so that the effective tortuosity of the membrane for transport of hydrophobic solvents increases.     

Formation of Zn(1-x)MnxS nanowires within mesoporous silica of different pore sizes

Arrays of highly ordered Zn(1-x)MnxS quantum wires with x ranging from 0.01 to 0.3 and with lateral dimensions of 3, 6, and 9 nm were synthesized within mesoporous SiO2 host structures of the MCM-41 and SBA-15 type. The hexagonal symmetry of these arrays (space group p6m) and the high degree of order was confirmed by X-ray diffraction and transmission electron microscopy (TEM) studies. Physisorption measurements show the progressive filling of the pores of the SiO2 host structures, while TEM and Raman studies reveal the wire-like character of the incorporated Zn(1-x)MnxS nanostructures. X-ray absorption near-edge structure, extended X-ray absorption fine structure, photoluminescence excitation (PLE), and electron paramagnetic resonance studies confirm the good crystalline quality of the incorporated Zn(1-x)MnxS guest species and, in particular, that the Mn2+ ions are randomly distributed and are situated on tetrahedrally coordinated cation sites of the Zn(1-x)MnxS wires for all x up to 0.3. The amount of Mn2+ ions loosely bound to the surface of the Zn(1-x)MnxS nanowires is less than 4% of the total Mn content even for the 3 nm nanostructures up to the highest Mn content of x = 0.3. The effects of the reduction of the lateral dimensions on electronic properties of the diluted magnetic semiconductor were studied by PLE spectroscopy. Due to the quantum confinement of the excitons in the wires an increase of the direct band gap with decreasing particle size is observed.     

界面活化的溶胶凝胶包埋Candida rugosa脂肪酶催化合成维生素E琥珀酸酯

采用界面活化的溶胶凝胶包埋Candida rugosa脂肪酶(CRL)催化合成了维生素E琥珀酸酯.考察了影响溶胶凝胶包埋固定化CRL的因素,获得的最佳固定化条件为:丙基三甲氧基硅烷/正硅酸四乙酯摩尔比为1/1,水与硅烷前体摩尔比为15,酶的添加量为0.5mg/ml,PEG400的添加量为12μl/ml溶胶. 溶胶凝胶包埋的CRL在50℃,18h后其活性仍然保持了70.58%,是游离酶的2.6倍,且稳定性得到了明显的改善.基于CRL的界面特性,采用五种表面活性剂对其进行界面活化.结果表明,采用橄榄油活化的溶胶凝胶包埋的CRL合成维生素E琥珀酸酯的酯化活力最高,相比原酶和未界面活化的溶胶凝胶包埋酶分别提高了6.7和1.43倍.     

Direct synthesis and catalytic applications of ordered large pore aminopropyl-functionalized SBA-15 mesoporous materials

SBA-15 mesoporous silica has been functionalized with aminopropyl groups through a simple co-condensation approach of tetraethyl orthosilicate (TEOS) and (3-aminopropyl)triethoxysilane (APTES) using amphiphilic block copolymers under acidic conditions. The organic-modified SBA-15 materials have hexagonal crystallographic order, pore diameter up to 60 A, and the content of aminopropyl groups up to 2.3 mmol g(-1). The influences of TEOS prehydrolysis period and APTES concentration on the crystallographic order, pore size, surface area, and pore volume were examined. TEOS prehydrolysis prior to the addition of APTES was found essential to obtain well-ordered mesoporous materials with amino functionality. The amount of APTES incorporated in the silica framework increased with the APTES concentration in the synthesis gel, while the ordering of the mesoporous structure gradually decreased. Analysis with TG, IR, and solid state NMR spectra demonstrated that the aminopropyl groups incorporated in SBA-15 were not decomposed during the preparation procedure and the surfactant P123 was fully removed through ethanol extraction. The modified SBA-15 was an excellent base catalyst in Knoevenagel and Michael addition reactions.     

A simple approach to prepare monodisperse mesoporous silica nanospheres with adjustable sizes

A new and facile approach has been developed to prepare monodisperse mesoporous silica nanospheres (MMSNs) with controlled particle sizes and pore structures. In our approach, MMSNs were synthesized simply in a sodium acetate solution without adding any other alkali or alcohol additives. MMSNs have a spherical shape and uniform particle sizes, which can be adjusted from 50 to 110 nm by increasing the reaction temperature from 40 to 80 °C. By performing a subsequent hydrothermal treatment (HT) under basic condition (pH=~11.5) at 130 °C, the mesoporous pore volume and surface area can be enhanced, while keeping the mono-dispersion characteristics and the mesopore size almost unchanged. The pore sizes of MMSNs can be adjusted from 2.8 to 4.0 nm under acidic solutions by changing the HT temperature from 100 to 130 °C. The formation process of MMSNs has been investigated by transmission electron microscopy (TEM) and attenuated total reflection Fourier transform infrared (ATR-FTIR) techniques. A spherical micelle templating mechanism is proposed to explain the formation of MMSNs in our system, which is different from that of traditional highly ordered mesoporous silica nanoparticles (MCM-41).     

Amino acid adsorption on mesoporous materials: influence of types of amino acids, modification of mesoporous materials, and solution conditions

In order to disclose the dominant interfacial interaction between amino acids and ordered mesoporous materials, the adsorption behaviors of five amino acids on four mesoporous materials were investigated in aqueous solutions with adjustable amino acid concentration, ion strength, and pH. The selected amino acids were acidic amino acid glutamic acid (Glu), basic amino acid arginine (Arg), and neutral amino acids phenylalanine (Phe), leucine (Leu), and alanine (Ala), and the selected mesoporous materials were SBA-15, Al-SBA-15, CH3(10%)-SBA-15, and CH3(20%)-SBA-15. The adsorption capacities of Glu and Arg were strongly dependent on pH and surface charge of the mesoporous adsorbent. The adsorption of Phe showed pH insensitivity but depended on the surface organic functionalization of mesoporous adsorbent. On the basis of the theoretical analysis about the interaction between amino acid and adsorbent, such a remarkable difference was attributed to the different nature of the interaction between amino acid and adsorbent. Arg could be readily adsorbed on the surface of SBA-15, especially Al-SBA-15, under appropriate pH in which the electrostatic interaction was predominant. The driving force of Phe adsorption on mesoporous adsorbent mainly came from the hydrophobic interaction. Therefore, the adsorption capability of Arg decreased with increasing ion strength of solution, while the adsorption capability of Phe increased with the increasing degree of CH3 functionalization on SBA-15. For neutral amino acid Phe, Ala, and Leu, the adsorption capability increased with the increase of the length of their side chains, which was another evidence of hydrophobic effect. Thus, all the adsorption of amino acids on mesoporous silica materials can be decided by the combined influence of two fundamental interactions: electrostatic attraction and hydrophobic effect.     

Distribution of encapsulated materials in colloidal particles and its impact on oxidative stability of encapsulated materials

The oxidative stability of encapsulated product is a critical parameter in many products from food to pharmaceutical to cosmetic industries. The overall objective of this study was to correlate differences in the distribution pattern of encapsulated material within solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) with the relative susceptibility of these materials to undergo oxidation. The distribution of an encapsulated lipid soluble dye (Nile Red) in SLNs and NLCs was quantitatively measured using fluorescence imaging. The relative susceptibility of the encapsulated material to react with free radicals generated in the aqueous phase and oxygen from the ambient environment was measured using peroxyl radical and oxygen sensitive fluorescent dyes encapsulated in the lipid phase of colloidal particles respectively. Imaging measurements demonstrate a significant exclusion of the encapsulated dye molecules from the lipid core of SLNs as compared to NLCs. Imaging results also showed significant differences in the intraparticle distribution of encapsulated dye between NLCs containing 1 and 10% liquid lipid. On the basis of these differences in distribution, we hypothesized that the relative susceptibility of encapsulated material to peroxyl radicals and oxygen would be in the order SLNs > 1% NLC > 10% NLC. Measurement of relative susceptibility of peroxyl radical sensitive dye encapsulated in SLNs and NLCs to peroxyl radicals generated in the aqueous phase validated the proposed hypotheses. However, the susceptibility of encapsulated oxygen sensitive dye to ambient oxygen was not significantly different between SLNs and NLCs. The results of this study demonstrate that difference in distribution pattern of encapsulated material within colloidal particles can significantly influence the susceptibility of encapsulated material to react with free radicals. Overall, this study demonstrates a comprehensive approach to characterize the susceptibility of encapsulated materials in colloidal particles to oxidation processes.     

Protein adsorption on the mesoporous molecular sieve silicate SBA-15: effects of pH and pore size

A mesoporous molecular sieve silicate, SBA-15, with three pore sizes (38.1 A, 77.3 A, and 240 A) has been synthesized using a non-ionic, tri-block copolymer as a template in a sol-gel method. The effects of synthesis conditions on the pore size and pore-size distribution of this adsorbent have been described. The adsorption of proteins on these crystalline, ordered, materials has been studied. The kinetics of adsorption and equilibrium capacity have been probed with three proteins of different dimensions. The effects of electrostatic interactions and protein size are illustrated. It has been shown that SBA-15 materials can be tailored to show size selectivity for proteins, and very high capacities (450 mg/g) can be obtained. Furthermore, the rates of adsorption are shown to be dependent on the pore size, protein structure and solution pH.     

Enhanced catalytic activity of lipase encapsulated in PCL nanofibers

Use of biocatalysis for industrial synthetic chemistry is on the verge of significant growth. Enzyme immobilization as an effective strategy for improving the enzyme activity has emerged from developments especially in nanoscience and nanotechnology. Here, lipase from Burkholderia cepacia (LBC), as an example of the luxuriant enzymes, was successfully encapsulated in polycaprolactone (PCL) nanofibers, proven by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Evaluated in both organic and aqueous medium, the activation factor of the encapsulated enzymes in the hydrolysis reaction was generally higher than that in the transesterification reaction. Enhanced catalytic activities were found when 5-20 w/w % of LBC was loaded. The effect of different solvents pretreatment on the activity of immobilized LBC was also investigated. The highest activation factor was found up to 14 for the sample containing acetone-treated LBC/PCL (10 w/w %). The encapsulated lipase reserved 50% of its original activity after the 10th run in the transesterification reaction in hexane medium. The mechanism of activation of lipase catalytic ability based on active PCL nanofiberous matrix is proposed.     

Preparation of mesoporous cadmium sulfide nanoparticles with moderate pore size

The preparation of cadmium sulfide nanoparticles that have a moderate pore size is reported. This preparation method involves a hydrothermal process that produces a precursor mixture and a following acid treatment of the precursor to get the porous material. The majority of the particles have a pore size close to 20 nm, which complements and fills in the gap between the existing cadmium sulfide materials, which usually have a pore size either less than 10 nm or are well above 100 nm.     

Determination of pore sizes and volumes of porous materials by 129Xe NMR of xenon gas dissolved in a medium

In our previous paper (J. Phys. Chem. B 2005, 109, 757) it was illustrated that the 129Xe NMR spectra of xenon dissolved in acetonitrile confined into mesoporous materials give detailed information on the system, especially about the pore sizes. A resonance signal originating from xenon atoms sited in very small cavities built up inside the pores during the freezing transition (referred to as signal D) turned out to be highly sensitive to the pore size. The emergence of this signal reveals the phase transition temperature of acetonitrile inside the pores, which can also be used to determine the size of the pores. In addition, the difference in the chemical shifts of two other signals arising from xenon dissolved in bulk and confined acetonitrile (B and C) provides another method for determining the pore sizes. In the present work, the observed correlations have been investigated using an extensive set of measurements with a variety of porous materials (silica gels and controlled pore glasses) with the mean pore diameters ranging from 43 to 2917 A. The usefulness of the correlations has been demonstrated by calculating the pore size distributions from the spectral data. The distributions are in agreement with those reported by the manufacturers, when the mean pore diameter is smaller than approximately 500 A. In addition, it has been shown that the porosity of the materials can be determined by comparing the intensities of the signals arising from the bulk and confined liquid. When acetonitrile is replaced by cyclohexane in the sample, the dependence of the chemical shift difference between the B and C signals on the pore size becomes more sensitive, but no D signal appears below the freezing point. In addition, the influence of xenon gas on the melting points of bulk and confined acetonitrile has been studied by 1H NMR cryoporometry. The measurements show that the temperature of the latter transition lowers slightly more, and consequently affects the pore sizes calculated by means of the difference in the phase transition temperatures. Hysteresis in the phase transitions in a cooling-warming cycle has also been studied as a function of the temperature stabilization time by 129Xe NMR of xenon dissolved in acetonitrile.     

外围为柔性链状取代基团Ni-酞菁配合物的合成及其在MCM-41中的装载

合成了外围具有柔性链状基团的2（3）,9（10）,16（17）,23（24）-四-（N,N-二乙胺基乙氧基）Ni-酞菁配合物（2）．以正硅酸乙酯为硅源,十六烷基三甲基溴化铵为模板剂,水热法将该Ni-酞菁配合物（2）装载到MCM-41中．利用UV-Vis-NIR,FT-IR,XRD,TEM,FESEM及N2吸附-脱附等温线对制备的样品进行了表征．研究表明制备的样品中Ni-酞菁配合物（2）主要以单体和二聚体的形式存在于MCM-41中．通过不同制备酞菁浓度的装载研究表明,较高制备酞菁浓度有利于制备结晶度及孔道有序性较高的介孔分子筛样品．