Characterisation of blends of polyisoprene and polystyrene by on-line hyphenation of HPLC and (1) H-NMR: LC-CC-NMR at critical conditions of both homopolymers

Blends of polystyrene (PS) and polyisoprene (PI) were analysed by on-line hyphenation of LC at critical conditions and (1) H-NMR. Chromatography at critical conditions was established for both PS and PI. At both critical conditions, a perfect separation into the blend components was achieved. By operating at critical conditions of one blend component and size exclusion mode for the other it is possible to determine the molar mass using a suitable calibration. By using NMR as a detector, the microstructure of PI can be identified, quantified and the chemical composition of the blends can be calculated by monitoring the signal intensities of the olefinic protons of isoprene and the aromatic protons of PS.     

Two-dimensional liquid chromatography of PDMS-PS block copolymers

In this study, liquid chromatography at critical conditions of polystyrene (PS) and polydimethylsiloxane (PDMS) is used as the first dimension for the two-dimensional analysis of polydimethylsiloxane-block-polystyrene copolymers. Comprehensive two-dimensional liquid chromatography with size exclusion chromatography as the second dimension reveals information about the molar mass distributions of all separated fractions from the first dimension. Furthermore, fractions eluting at the critical conditions were collected and subjected to analysis in the second dimension at the critical adsorption point of the other block. These fractions were analyzed by Fourier transform infrared spectroscopy to determine their chemical compositions. The combination of the above approaches and the calibration of the evaporative light scattering detector for the first-dimension analysis yield deep insights into the molecular heterogeneity of the block copolymer samples. The composition of the samples and the chemical composition of the real block copolymer are also calculated by combining the results obtained at both critical conditions.     

Synthesis of hybrid dendritic‐linear block copolymers with dendritic initiators prepared by convergent living anionic polymerization

Hybrid dendritic‐linear block copolymers were made in one‐pot by convergent living anionic polymerization. Dendritic polystyrene macroinitiators were synthesized by slowly adding a mixture of either vinylbenzyl chloride (VBC) or 4‐(chlorodimethylsilyl)styrene (CDMSS) and styrene (1 : 10 molar ratio of coupling agent to styrene) to a solution of living polystyryllithium. The addition was ceased prior to the addition of a stoichiometric amount of coupling agent to retain a living chain end. To the living dendritically branched polystyrene was then added either styrene or isoprene to polymerize a linear block from the dendritic polystyrene. The resulting copolymers were characterized by gel permeation chromatography coupled with multiangle laser light scattering (GPC‐MALLS), which clearly demonstrated the formation of diblock copolymers. The diblock copolymers were further characterized by ¹H NMR, which showed the presence of the two blocks in the case of dendritic polystyrene‐block‐linear polyisoprene. The measurement of intrinsic viscosity showed that the dilute solution properties of the block copolymers are greatly influenced by the dendritic portion. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 152–161, 2001     

High Temperature Interaction Chromatography of Olefin Copolymers

Summary: The synthesis and characterization of polyolefins continues to be one of the most important areas for academic and industrial polymer research. One consequence of the development of new “tailor-made” polyolefins is the need for new and improved analytical techniques for the analysis of polyolefins with respect to molar mass and chemical composition distribution. The present article briefly reviews different new and relevant chromatographic techniques for polyolefin analysis. For the fast analysis of the chemical composition distribution of polyolefins a new high-temperature gradient high-performance liquid chromatography (HPLC) system has been introduced. The efficiency of this system for the separation of various olefin copolymers is demonstrated. The correlation between elution volume and chemical composition can be accessed by on-line coupling of high temperature HPLC with FTIR spectroscopy. For the elucidation of the chemical composition as a function of molar mass high-temperature size exclusion chromatography and ¹H-NMR spectroscopy can be coupled. It is shown that the on-line NMR analysis of chromatographic fractions yields information on microstructure and chemical composition in addition to molar mass distribution.     

Analytical techniques for polymers with complex architectures

Complex polymers are distributed in more than one direction of molecular heterogeneity. In addition to the molar mass distribution, they are frequently distributed with respect to chemical composition, functionality, and molecular architecture. For the characterization of the different types of molecular heterogeneity it is necessary to use a wide range of analytical techniques. Preferably, these techniques should be selective towards a specific type of heterogeneity. The combination of two selective analytical techniques is assumed to yield a two-dimensional information on the molecular heterogeneity. For the analysis of complex polymers different liquid chromatographic techniques have been developed, including size exclusion chromatography (SEC) separating with respect to hydrodynamic volume, and liquid adsorption chromatography (LAC) which is used to separate according to chemical composition. Liquid chromatography at the critical point of adsorption (LC-CC) has been shown to be a versatile method for the determination of the functionality type distribution of macromonomers, the molecular architecture of homopolymers and the chemical heterogeneity of block and graft copolymers. The present paper presents the principle ideas of combining different analytical techniques in multidimensional analysis schemes for the analysis of polymers with complex architectures. Branched block and graft copolymers can efficiently be analyzed with respect to chemical composition and molar mass by LC-CC and two-dimensional chromatography. The chemical heterogeneity as a function of molar mass can be determined by combining interaction chromatography and FTIR spectroscopy. For the analysis of star-like polymers LC-CC is shown to be a powerful technique when the molar mass of different segments (blocks, grafts) must be determined.     

Tuning block copolymer structural information by adjusting salt concentration in liquid chromatography at critical conditions coupled with electrospray tandem mass spectrometry

Different cationic adducts of poly(ethylene oxide)/polystyrene block co‐oligomers could be produced by adjusting the salt concentration in the mobile phase using a coupling between liquid chromatography at critical conditions and electrospray ionization mass spectrometry. Formation of doubly lithiated adducts was observed at high LiCl concentration (1 mM) while lowering the salt concentration down to 0.1 mM allowed co‐oligomers to be ionized with both a proton and a lithium. The fragmentation pathways observed to occur upon collision‐induced dissociation of ionized copolymers were shown to be highly dependent on the nature of the cationic adducts. As a result, complementary structural information could be reached by performing MS/MS experiments on different ionic forms of the same co‐oligomer molecule. On one hand, release of the nitroxide end‐group as a radical from [M+2Li]²⁺ was followed by a complete depolymerization of the polystyrene block, allowing both this end‐group and the polystyrene segment size to be determined. On the other hand, [M+H+Li]²⁺ precursor ions mainly dissociated via reactions involving bond cleavages within the nitroxide moiety, yielding useful structural information on this end‐group. Copyright © 2009 John Wiley & Sons, Ltd.     

Characterization of polyoxyalkylene block copolymers by combination of different chromatographic techniques and MALDI-TOF-MS

Polyoxyalkylene diblock copolymers (consisting of PEO as hydrophilic block and PBO or PHO as hydrophobic block) are characterized by combination of two dimensional liquid chromatography and MALDI-TOF-MS. Liquid chromatography under critical conditions (LCCC) is used as first dimension and fractions are collected, mobile phase evaporated and diluted in the mobile phase used in the second dimension (SEC, LCCC or LAC). This two-dimensional chromatography in combination of MALDI-TOF-MS gives information about purity of reaction products, presence of the byproducts, chemical composition and molar mass distribution of all the products.     

On-line coupling of liquid chromatography at critical conditions with electrospray ionization tandem mass spectrometry for the characterization of a nitroxide-mediated poly(ethylene oxide)/polystyrene block copolymer

Coupling of liquid chromatography at critical conditions (LCCC) with on-line mass spectrometry (MS) detection was implemented via an electrospray ionization (ESI) interface, using a mobile phase containing the cationizing agent. Critical conditions established for poly(ethylene oxide) were used to characterize a poly(ethylene oxide)/polystyrene block copolymer (PEO-b-PS) in both MS and MS/MS modes. As co-oligomer molecules were successfully separated according to the PS block size, structural information could be reached from simplified MS spectra. The microstructure of this copolymer, synthesized by nitroxide-mediated polymerization, could further be unambiguously characterized in LCCC/ESI-MS/MS experiments since the PS block size could be reached by both the co-oligomer chromatographic behavior and its MS/MS pattern.     

SYNTHESIS OF TRIBLOCK COPOLYMERS OF STYRENE AND ISOPRENE BY A NITROXIDE-MEDIATED LIVING FREE RADICAL POLYMERIZATION

The controlled free radical polymerization of styrene and isoprene initiated with benzoyl peroxide (BPO) in the presence of 2,2,6,6-tetramethyl piperidine-N-oxyl (TEMPO) at 125 ℃ were performed. The obtained polyisoprene and polystyrene homopolymers served as macroinitiators for block copolymerization of isoprene and styrene to synthesize poly(styrene-b-isoprene) and poly(isoprene-b-styrene) diblock copolymers. Diblock copolymers with well-defined structures as well as controlled and narrow molecular weight distribution wereobtained from the lower-mass polystyrene and polyisoprene homopolymers. These copolymers were found to be active as macroinitiators in the synthesis of the poly(styrene-b-isoprene-b-styrene) and poly(isoprene-b-styrene-b-isoprene) triblock copolymers. 1H-NMR spectroscopy and gel permeation chromatography (GPC) were used for the investigation of polymer strucmre, molecular weight and polydispersity (PD).     

Characterization of poly(2-oxazoline) homo- and copolymers by liquid chromatography at critical conditions

In this study liquid chromatography at critical conditions for poly(2-ethyl-2-oxazoline)s (PEtOx) has been performed for the first time in order to analyze functional PEtOx homopolymers and block copolymers. Besides the verification of the critical point of adsorption with two series of ester end group functionalized PEtOx homopolymers, to evaluate the effect of both the chain length dependence and the end group polarity, using a cyano column with a solvent combination of 2-propanol and water, also two-dimensional liquid chromatography (2D-LC) has been applied for a poly(2-oxazoline) block copolymer. The combined characterization techniques provided further information about the polymerization procedure with regard to the formation of side-products by separation of the block copolymer from the corresponding homopolymer impurities. In addition, hyphenation of LCCC with MALDI-TOF MS and ESI-Q-TOF tandem mass spectrometry verified the obtained results.     

Chromatographic characterization of amphiphilic di‐ and tri‐block copolymers of poly(ethylene oxide) and poly(ε‐caprolactone)

Amphiphilic di‐ and tri‐block copolymers based on poly(ethylene oxide) as a hydrophilic segment and poly(ε‐caprolactone) as a hydrophobic part are synthesized by the ring‐opening polymerization of ε‐caprolactone while using poly(ethylene glycol)s and methoxy poly(ethylene glycol)s of varying molar masses as macro‐initiators. The synthesized block copolymers are characterized with respect to their total relative molar mass and its distribution by size exclusion chromatography. Liquid chromatography at critical conditions of both blocks is established for the analysis of individual block lengths and tracking presence of unwanted homopolymers of both types in the block copolymer samples. New critical conditions of polycaprolactone on reversed phase column are reported using organic mobile phase. The established critical conditions of polycaprolactone extended the applicable molar mass range significantly compared to already reported critical conditions of polycaprolactone in aqueous mobile phase. Block copolymers are also analyzed at critical conditions of poly(ethylene glycol). Complete analysis of the di‐ and tri‐block copolymers at corresponding critical conditions provided a fair estimate of molar mass of non‐critical block besides information regarding presence of homopolymers of both types in the samples.     

Two-dimensional liquid chromatography of diblock copolymers: Simulation at various adsorption interaction conditions

Diblock copolymers, which are heterogeneous in both molar mass and composition, can be fully characterized by using two-dimensional chromatography. Since the size-exclusion, the adsorption, and the critical interaction based modes of chromatography are possible for each of the polymers A and B, this leads to a variety of options for 2D-chromatography of copolymers AB. Using the theory of chromatography of block copolymers, 2D-chromatograms are simulated that correspond to the most interesting of these options. Orthogonal 2D-chromatograms are expected, if in the 1st dimension the critical condition is created for A, while in the 2nd dimension – for B. The situations, where A and B are both adsorbable, as well as those where the conditions of adsorption for A and SEC for B are created, are also considered. In particular, it is shown that the 2nd dimension combination of the critical condition for A and SEC – for B is preferable than that with SEC condition for both A and B. The simulated 2D-chromatograms of low- and high molar mass diblock copolymers, as well as of copolymers with one short block are compared with the reported real ones; it is concluded that the corresponding virtual and real 2D-chromatograms are qualitatively very similar.     

Two-Dimensional Chromatographic Analysis of Polystyrene-block-poly(methyl methacrylate) Copolymers Synthesized by Selective Oxidation of Polystrene-9-borabicyclo[3.3.1]nonane

Summary: The preparation of polystyrene block methyl methacrylate copolymers (PS-b-PMMA) is described. The polystyrene segment was prepared by anionic polymerization and the methylmethacrylate segment was prepared via free radical autoxidation of a borane agent attached to the styrene chain. 1 The chemistry involves a transformation of the anionic polymerization process to borane chemistry by firstly producing polystyrene with chain end unsaturated alkyl functional groups prepared using a n-butyllithium initiator and termination with allylchlorodimethylsilane. Secondly, the unsaturated macroinitiator end was hydroborated by 9-borabicyclo[3.3.1]nonane (9-BBN) to produce a borane terminated PS. Thirdly, the borane group at the chain end was selectively oxidized and converted to polymeric radicals in the presence of methyl methacrylate which then initiated radical polymerization to produce block copolymers. The polymer obtained was characterized using several chromatographic techniques including LC-CC (liquid chromatography under critical conditions) for the polystyrene segments and two-dimensional chromatography with LC-CC in the first dimension and SEC in the second. The results show that block formation was successful although significant homopolymerization of methyl methacrylate is also obtained.     

(Star PS)-block-(Linear PI)-block-(Star PS) Triblock Copolymers – Thermoplastic Elastomers with Complex Branched Architectures

Polystyrene-block-polyisoprene-block-polystyrene triblock copolymers were synthesized with star-shaped branching in the polystyrene phase. The block copolymers were formed through sequential anionic polymerization by first synthesizing linear polystyrene, followed by star coupling using 4-(chlorodimethylsilyl)styrene, then the polymerization of isoprene, followed by difunctional coupling with dichlorodimethylsilane. The polymerization was followed by gel permeation chromatography and the resulting copolymers were characterized by ¹H NMR spectroscopy to examine the polyisoprene microstructure.     

Quantitation of functionality of poly(methyl methacrylate) by liquid chromatography under critical conditions followed by evaporative light-scattering detection. Comparison with NMR and titration

Atom transfer radical polymerisation (ATRP) is a versatile 'living' controlled polymerisation technique for the synthesis of well-defined architectures such as block copolymers, gradient copolymers, hyperbranched polymers and telechelic polymers. ATRP provides control over molecular mass and molecular mass distribution and is suitable for the polymerisation of a wide variety of monomers, including methyl methacrylate. A chromatographic method was developed for an endgroup-based separation of low-molecular-mass poly(methyl methacrylate) (PMMA), based on liquid chromatography under critical conditions. With this method the PMMA, irrespective of its low-molecular-mass, is separated according to endgroups (functionality) due to interactions of the polar endgroups with the non-modified silica based stationary phase. The different series were identified using on-line atmospheric pressure ionisation electrospray mass spectrometry and quantified by evaporative light scattering detection. These results were compared with those obtained by NMR and titration.     

Matrix-assisted laser desorption/ionization mass spectrometry of synthetic polymers. 7. analysis of fatty alcohol ethoxylates by coupled liquid chromatography at the critical point of adsorption and MALDI-TOF mass spectrometry

Fatty alcohol ethoxylates can be analyzed efficiently with respect to functionality and molar mass by coupled liquid chromatography and MALDI-TOF mass spectrometry. Both techniques are coupled via a robotic interface, where the matrix is coaxially added to the eluate and spotted dropwise onto the MALDI target. It is shown that liquid chromatography at critical conditions of adsorption coupled to MALDI-TOF yield useful structural information on oligomer masses and chemical composition. In particular, the analysis of technical fatty alcohol ethoxylates by LC-CC/MALDI-TOF reveals the presence of different functionality fractions in one sample. The oligomer distributions of all functionality fractions are determined.     

Separation of polyethylene glycols and maleimide‐terminated polyethylene glycols by reversed‐phase liquid chromatography under critical conditions

The separation of polyethylene glycols and maleimide‐substituted polyethylene glycol derivatives based on the number of maleimide end‐groups under critical liquid chromatography conditions has been investigated on a reversed‐phase column. The critical solvent compositions for nonfunctional polyethylene glycols and bifunctional maleimide‐substituted polyethylene glycols were determined to be identical at about 40% acetonitrile in water on a reversed‐phase octadecyl carbon chain‐bonded silica column using mixtures of acetonitrile and water of varying composition as the mobile phase at 25°C. The maleimide‐functionalized polyethylene glycols were successfully separated according to maleimide functionality (with zero, one, two, or three maleimide end‐groups, respectively) under the critical isocratic elution conditions without obvious effect of molar mass. The separation was mainly due to the hydrophobic interaction between the maleimide end‐groups and the column packing. Off‐line matrix‐assisted laser desorption/ionization time of flight mass spectrometry was used to identify the repeating units and, especially, the end‐groups of the maleimide‐substituted polyethylene glycols. Liquid chromatography analysis at critical conditions could provide useful information to optimize the synthesis of functional polyethylene glycols. To our knowledge, this is the first report of the baseline separation of maleimide‐functionalized polyethylene glycols based on the functionality independent of the molar mass without derivatization by isocratic elution.     

Characterization of synthetic copolymers by interaction polymer chromatography: Separation by microstructure

Gradient elution of synthetic polymers has been studied both theoretically and experimentally using normal and reversed-phase HPLC systems. An accurate equation describing the gradient elution of polymer-homologous series in the context of continuous random-flight model of a flexible polymer chain interacting with attractive surface of the porous material has been derived and experimentally verified against a series of narrow polystyrene standards. Both the theory and the experiment predict the existence of molar mass-independent gradient elution at critical point of adsorption (CPA). The extension of the theory to synthetic copolymers predicts the existence of the CPA for statistical copolymers and describes its dependence on chemical composition and microstructure (blockiness) of the polymer chains. One of the important theoretical conclusions is that blockiness always increases the retention, so that blockier polymer chains elute later than their more random counterparts with the same chemical composition. This prediction has been confirmed experimentally using block and statistical styrene-methylmethacrylate copolymers. Block copolymers do not have CPA and always elute between critical points of the corresponding homopolymers. The retention depends on the polymer molar mass and increases with the length of the blocks from a stronger absorbing monomer. These findings provide theoretical and experimental bases for separation of statistical and block copolymers by chemical composition and microstructure of polymer chains.     

Liquid chromatography at critical conditions in ternary mobile phases: Gradient elution along the critical line

In ternary mobile phases consisting of acetone, methanol, and water, the retention of PEG on reversed‐phase columns is independent on molar mass at certain compositions of the mobile phase. Along this critical adsorption line, the retention of polypropylene glycol varies quite strongly, which can be utilized in the separation of block copolymers. Gradient elution along the critical line allows a baseline separation of all oligomers in polypropylene glycol up to approximately 25 propylene oxide units. The same resolution can be achieved in the separation of ethylene oxide‐propylene oxide block copolymers, regardless of the length of the ethylene oxide block.